- 19 Oct, 2004 40 commits
-
-
Andreas Gruenbacher authored
* ext[23]_xattr_list(): - Before inserting an xattr block into the cache, make sure that the block is not corrupted. The check got moved after inserting into the cache in the xattr consolidation patches, so corrupted blocks could become visible to cache users. - Take a variable out of the loop that calls the ->list handlers. * A few cosmetic changes. Signed-off-by:Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
James Morris authored
This patch adds xattr support to tmpfs, and a security xattr handler. The purpose of this is to allow udev to be mounted on tmpfs, as used currently by Fedora. Original patch from: Luke Kenneth Casson Leighton <lkcl@lkcl.net>. Signed-off-by:
James Morris <jmorris@redhat.com> Signed-off-by:
Stephen Smalley <sds@epoch.ncsc.mil> Signed-off-by:
-
James Morris authored
This patch updates the devpts xattr handler code to the generic xattr API, also adds a GPL notice, author and copyright details. Signed-off-by:
-
James Morris authored
This patch converts ext2 xattr and acl code to the new generic xattr API. Signed-off-by:
-
James Morris authored
This patch converts the ext3 xattr and acl code to the generic xattr API. Signed-off-by:
-
James Morris authored
This patch replaces the dentry parameter with an inode in the LSM inode_{set|get|list}security hooks, in keeping with the ext2/ext3 code. dentries are not needed here. Signed-off-by: -
James Morris authored
This patch consolidates common xattr handling logic into the core fs code, with modifications suggested by Christoph Hellwig (hang off superblock, remove locking, use generic code as methods), for use by ext2, ext3 and devpts, as well as upcoming tmpfs xattr code. Signed-off-by:
-
Carlos Eduardo Medaglia Dyonisio authored
This patch fixes troubles when compiling some applications that include <linux/byteorder/little_endian.h>, like xmms. Signed-off-by:
-
Ulrich Drepper authored
The last change to alloc_layer in lib/idr.c unnecessarily complicates the code and depending on the definition of spin_unlock will cause worse code to be generated than necessary. The following patch should improve the situation. Signed-off-by:
Ulrich Drepper <drepper@redhat.com> Signed-off-by:
-
Haroldo Gamal authored
This patch fixes "Samba Bugzilla Bug 999". The last version (2.6.8.1) of smbfs kernel module do not honor uid, gid, file_mode and dir_mode supplied by user during mount. This bug is also logged as "Kernel Bug Tracker Bug 3330". To fully work, some modifications are needed to samba smbmount.c and smbmnt.c files. Those patches are available at Samba and Kernel Bug Tracker pages. After those patches, if the user do not supply any of the parameters above, the uid, gid, file_mode and dir_mode on the server will be used by the client. Signed-off-by:
-
Nick Piggin authored
Hugh and I both thought this would be generally useful. Signed-off-by:
Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Nick Piggin authored
This taint didn't appear to be reported. Signed-off-by:
-
Andi Kleen authored
This patch adds machine check tainting. When a handled machine check occurs the oops gets a new 'M' flag. This is useful to ignore machines with hardware problems in oops reports. On i386 a thermal failure also sets this flag. Done for x86-64 and i386 so far. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Dipankar Sarma authored
Finally some in-tree documentation for RCU-based dcache look-up. Signed-off-by:
Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by:
-
Dipankar Sarma authored
Tested using dcachebench and hevy rename test. http://lse.sourceforge.net/locking/dcache/rename_test/ While going over dcache code, I realized that d_bucket which was introduced to prevent hash chain traversals from going into an infinite loop earlier, is no longer necessary. Originally, when RCU based lock-free lookup was first introduced, dcache hash chains used list_head. Hash chain traversal was terminated when dentry->next reaches the list_head in the hash bucket. However, if renames happen during a lock-free lookup, a dentry may move to different bucket and subsequent hash chain traversal from there onwards may not see the list_head in the original bucket at all. In fact, this would result in the list_head in the bucket interpreted as a list_head in dentry and bad things will happen after that. Once hlist based hash chains were introduced in dcache, the termination condition changed and lock-free traversal would be safe with NULL pointer based termination of hlists. This means that d_bucket check is no longer required. There still exist some theoritical livelocks like a dentry getting continuously moving and lock-free look-up never terminating. But that isn't really any worse that what we have. In return for these changes, we reduce the dentry size by the size of a pointer. That should make akpm and mpm happy. Signed-off-by:
-
Dipankar Sarma authored
__d_lookup() has leftover stuff from earlier code to protect it against rename. The smp_rmb() there was needed for the sequence counter logic. Original dcache_rcu had : + move_count = dentry->d_move_count; + smp_rmb(); + if (dentry->d_name.hash != hash) continue; if (dentry->d_parent != parent) continue; This was to make sure that comparisons didn't happen before before the sequence counter was snapshotted. This logic is now gone and memory barrier is not needed. Removing this should also improve performance. The other change is the leftover smp_read_barrier_depends(), later converted to rcu_dereference(). Originally, the name comparison was not protected against d_move() and there could have been a mismatch of allocation size of the name string and dentry->d_name.len. This was avoided by making the qstr update in dentry atomic using a d_qstr pointer. Now, we do ->d_compare() or memcmp() with the d_lock held and it is safe against d_move(). So, there is no need to rcu_dereference() anything. In fact, the current code is meaningless. Signed-off-by: -
Martin Schwidefsky authored
This patch moves some definitions among time.h, times.h, timex.h and jiffies.h. The purpose is to sort all jiffies related functions to jiffies.h, to get rid of the cyclic dependency between time.h & timex.h and to move all #include lines to the start of the header files. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
The CLOCK_TICK_FACTOR and FINETUNE defines from <asm/timex.h> are not used anywhere. Kill them. Signed-off-by:
-
Martin Schwidefsky authored
For non-smp kernels the call to update_process_times is done in the do_timer function. It is more consistent with smp kernels to move this call to the architecture file which calls do_timer. Signed-off-by:
-
Christoph Hellwig authored
security.h gets pulled in in lots of places, so use forward declarations for struct ctl_table instead of pulling sysctl in everywhere. Signed-off-by:
-
Christoph Hellwig authored
These had been officially deprecated since Rusty's module rewrite, but never got the __deprecated marker. The only remaining users are drm and mtd, so we'll get some warnings for common builds. But maybe that's the only way to get the drm people to fix the mess :) Signed-off-by:
-
Christoph Hellwig authored
They've been marked deprecated since 2.5.x and there's no more users. Signed-off-by:
-
Andreas Gruenbacher authored
When building external modules, MODVERDIR is relative to the external module instead of in the kernel source tree. Use the MODVERDIR environment variable instead of the hard-coded path in modpost. Signed-off-by:
-
Stelian Pop authored
A simple ringbuffer implementation for various character drivers. Signed-off-by:
-
William Lee Irwin III authored
Andi Kleen requested that the number of pagetable pages in use by a process be reported in /proc/$PID/status; this patch implements that. Signed-off-by:
-
William Lee Irwin III authored
Relatively minor add-on (not necessarily tied to it or required to be taken or a fix for any bug). Since cond_resched() is using PREEMPT_ACTIVE now, it may be useful to update the open-coded instance of cond_resched() to use the generic call. Also, it should probably be __sched so the caller shows up in wchan. Signed-off-by:
-
William Lee Irwin III authored
Not all binfmts page align ->end_code and ->start_code, so the task_mmu statistics calculations need to perform this alignment themselves. Signed-off-by:
-
Natalie Protasevich authored
In arch/i386/kernel/acpi/boot.c, platform GSI does not propagate back from mp_register_gsi() to a calling routine which results in IRQ to be set for wrong GSI. This causes most of the PCI slots on the first PCI module to fail. This patch fixes the problem by returning new GSI back to acpi_register_gsi(). Signed-off-by:
Natalie Protasevich <Natalie.Protasevich@unisys.com> Signed-off-by:
-
Ian Kent authored
Having recently repaired autofs' ability to recognise updates to maps dynamically I found I needed to reintroduce the directory inode lookup method (I broke the update recognition several versions ago, oops). This patch does this and applies cleanly against 2.6.9-rc1-mm4. As far as I can tell from testing it doesn't introduce any backward incompatibilities. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Zwane Mwaikambo authored
I had to use the following patch to allow multiple arguments to be passed down to the asm stub for alternative_input whilst writing alternatives for mwait code, it seems like a simple enough fix. Signed-off-by:
Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by:
-
William Lee Irwin III authored
The pid_max sysctl doesn't enforce PID_MAX_LIMIT or sane lower bounds. RESERVED_PIDS + 1 is the minimum pid_max that won't break alloc_pidmap(), and PID_MAX_LIMIT may not be aligned to 8*PAGE_SIZE boundaries for unusual values of PAGE_SIZE, so this also rounds up PID_MAX_LIMIT to it. Signed-off-by:
-
William Lee Irwin III authored
/proc/ breaks when PID_MAX_LIMIT is elevated on 32-bit, so this patch lowers it there. Signed-off-by:
-
William Lee Irwin III authored
I was informed that the vendor component of the copyright can't be clobbered without more care, so this patch retains the older vendor, updating it only to reflect the appropriate time period. Signed-off-by:
-
William Lee Irwin III authored
Rewrite alloc_pidmap() to clarify control flow by eliminating all usage of goto, honor pid_max and first available pid after last_pid semantics, make only a single pass over the used portion of the pid bitmap, and update copyrights to reflect ongoing maintenance by Ingo and myself. Signed-off-by:
William Irwin <wli@holomorphy.com> Signed-off-by:
-
Suresh B. Siddha authored
Sync x86_64 noexec behaviour with i386. And remove all the confusing noexec related boot parameters. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
-
Petr Vandrovec authored
For several months I'm receiving complaints from matroxfb users that v4lctl suddenly stops working for them on kernel upgrade. Problem is that VIDIOC_S_CTRL was renumbered, but all distros still use old VIDIOC_S_CTRL value (f.e. even xawtv-3.94 in Debian unstable still uses old VIDIOC_S_CTRL definition). So let's add this old VIDIOC_S_CTRL value (now named VIDIOC_S_CTRL_OLD) to matroxfb's v4l handling. Signed-off-by:
Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by:
-
Antonino Daplas authored
Trivial fb_get_options fix for - cyber200fb - bw2fb Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Geert Uytterhoeven authored
fm2fb: Trivial fix for the breakage introduced by the addition of fb_get_options(). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch cleans up some old cruft in the manipulation of the LVDS interface registers and fixes the blanking code to work with various DVI flat panels. Since this is all very sensitive stuff, I'm posting the patch here for testing before submitting it upstream, though Andrew is welcome to put it in -mm. It also fix some problems with getting the right PLL setup on recent Mac laptops, replacing the old hard coded list of values with cleaner code that "probes" the PLL setup done by the firmware. Signed-off-by:
-
Petr Vandrovec authored
This small change does: (1) Properly document 'outputs' option. (2) Properly use accelerated characters drawing. fbcon used depth == 0 for character painting long ago, but it is fixed for several months. (3) Provide correct hints for fbcon about matroxfb/matroxfb_crtc2 hardware capabilities. Signed-off-by:
-
