- 05 Aug, 2008 40 commits
-
-
Benny Halevy authored
gcc 4.3.0 correctly emits the following warnings. When a vma covering addr is found, find_vma_prepare indeed returns without setting pprev, rb_link, and rb_parent. mm/mmap.c: In function `insert_vm_struct': mm/mmap.c:2085: warning: `rb_parent' may be used uninitialized in this function mm/mmap.c:2085: warning: `rb_link' may be used uninitialized in this function mm/mmap.c:2084: warning: `prev' may be used uninitialized in this function mm/mmap.c: In function `copy_vma': mm/mmap.c:2124: warning: `rb_parent' may be used uninitialized in this function mm/mmap.c:2124: warning: `rb_link' may be used uninitialized in this function mm/mmap.c:2123: warning: `prev' may be used uninitialized in this function mm/mmap.c: In function `do_brk': mm/mmap.c:1951: warning: `rb_parent' may be used uninitialized in this function mm/mmap.c:1951: warning: `rb_link' may be used uninitialized in this function mm/mmap.c:1949: warning: `prev' may be used uninitialized in this function mm/mmap.c: In function `mmap_region': mm/mmap.c:1092: warning: `rb_parent' may be used uninitialized in this function mm/mmap.c:1092: warning: `rb_link' may be used uninitialized in this function mm/mmap.c:1089: warning: `prev' may be used uninitialized in this function Hugh adds: in fact, none of find_vma_prepare's callers use those values when a vma is found to be already covering addr, it's either an error or an occasion to munmap and repeat. Okay, let's quieten the compiler (but I would prefer it if pprev, rb_link and rb_parent were meaningful in that case, rather than whatever's in them from descending the tree). Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: "Ryan Hope" <rmh3093@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Richard Hughes authored
A documentation cleanup patch. With a minor tweak to clarify units for kbs. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
mark gross <mgross@linux.intel.com> Signed-off-by:
-
Alexander Beregalov authored
proc: fix warnings fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 5 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 6 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 7 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 8 has type 'u64' fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 9 has type 'u64' Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Acked-by:
Andrea Righi <righi.andrea@gmail.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Huang Weiyi authored
Removed duplicated include <linux/delay.h> in drivers/misc/sgi-gru/grutlbpurge.c. Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Alexander Beregalov authored
fs/omfs/inode.c:495: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'u64' fs/omfs/inode.c:495: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type '__be64' Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Randy Dunlap authored
Fix handling of nested structs or unions. The regex to strip (eliminate) nested structs or unions was limited to only 0 or 1 matches. This can cause an uneven number of left/right braces to be stripped, which causes this: Warning(linux-2.6.27-rc1-git2//include/net/mac80211.h:336): No description found for parameter '}' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Jan Beulich authored
get_order() takes byte-sized input, not a page-granular one. Irrespective of this fix I'm inclined to believe that this doesn't work right anyway - bitmap_allocate_region() has an implicit assumption of 'pos' being suitable for 'order', which this function doesn't seem to enforce (and since it's being called with a byte-granular value there's no reason to believe that the callers would make sure device_addr is passed accordingly - it's also not documented that way). Signed-off-by:
Jan Beulich <jbeulich@novell.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Alexander Beregalov authored
drivers/video/aty/atyfb_base.c:2663: warning: 'aty_resume_chip' defined but not used Signed-off-by:
-
Julia Lawall authored
of_node_put is needed before discarding a value received from of_find_node_by_type, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct device_node *n; struct device_node *n1; struct device_node *n2; statement S; identifier f1,f2; expression E1,E2; constant C; @@ n = of_find_node_by_type(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f1(n,...) when != E1 = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n2 = f2(n,...) | E2 = n | return ...; ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Timur Tabi <timur@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by:
-
Jean Delvare authored
The name of the i2c buses shows in the output of "i2cdetect -l", so it's important to give informative names. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Krzysztof Helt authored
If the 'clear' command is used on the frame buffer with a logo the upper area is filled by few lines but not scrolled anymore. Fix this by removing the protected area for the logo if any part of the logo is cleared. Signed-off-by:
-
David Miller authored
I have a new PCI-E radeon RV380 series card (PCI device ID 5b64) that hangs in my sparc64 boxes when the init scripts set the font. The problem goes away if I disable acceleration. I haven't figured out that bug yet, but along the way I found some corrections to make based upon some auditing. 1) The RB2D_DC_FLUSH_ALL value used by the kernel fb driver and the XORG video driver differ. I've made the kernel match what XORG is using. 2) In radeonfb_engine_reset() we have top-level code structure that roughly looks like: if (family is 300, 350, or V350) do this; else do that; ... if (family is NOT 300, OR family is NOT 350, OR family is NOT V350) do another thing; this last conditional makes no sense, is always true, and obviously was likely meant to be "family is NOT 300, 350, or V350". So I've made the code match the intent. Signed-off-by:
David S. Miller <davem@davemloft.net> Acked-by:
-
Mark Asselstine authored
These functions have been deprecated for some time now but remained until all legacy callers could be removed. With a few commits in 2.6.26 this has happened so now we can remove these deprecated functions. Signed-off-by:
Mark Asselstine <mark.asselstine@windriver.com> Reviewed-by:
Matthew Wilcox <willy@linux.intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Ben Dooks authored
Add the missing MODULE_ALIAS() to the pwm_backlight driver. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Ben Dooks authored
Make the error paths in the pwm_backlight driver more informative in the probe path, especially for the times that it finds an error. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Mike Frysinger authored
blackfin RTC driver: drop PIE/stopwatch code since the hardware can only do a max of 1HZ and this same functionality is provided by UIE Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Since we use the write complete interrupt, wait for it to complete before sleeping so we don't wake right back up due to it Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
blackfin RTC driver: don't bother passing the rtc struct down to bfin_rtc_int_{set,clear} since it isnt needed (shaves off ~100bytes) Signed-off-by:Bryan Wu <bryan.wu@analog.com> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Sonic Zhang authored
Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Mike Frysinger authored
blackfin RTC driver: if we dont define irq_set_freq, the common rtc-dev layer will give us the same behavior of returning ENOTTY Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
-
David Brownell authored
While I'm glad to finally see the hole fixed whereby passing an invalid IRQ trigger type to request_irq() would be ignored, the current diagnostic isn't quite useful. Fixed by also listing the trigger type which was rejected. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Oleg Nesterov authored
Change __down_common() to use signal_pending_state() instead of open coding. The changes in kernel/semaphore.o are just artifacts, the state checks are optimized away. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Tom Zanussi authored
In relay's current read implementation, if the buffer is completely full but hasn't triggered the buffer-full condition (i.e. the last write didn't cross the subbuffer boundary) and the last subbuffer is exactly full, the subbuffer accounting code erroneously finds nothing available. This patch fixes the problem. Signed-off-by:
Tom Zanussi <tzanussi@gmail.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Andrea Righi <righi.andrea@gmail.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by:
-
Shadi Ammouri authored
This adds an SPI driver for the SPI controller found in various Marvell Orion ARM SoCs. It currently supports only one slave, which must use SPI mode 0. [dbrownell@users.sourceforge.net: cleanups, meet specs, pass "sparse"] Signed-off-by:
Shadi Ammouri <shadi@marvell.com> Signed-off-by:
Saeed Bishara <saeed@marvell.com> Signed-off-by:
Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
-
Hannes Reinecke authored
curr_queue is a local variable in a for loop, and it's being initialized at the start of each loop. So any assignment at the end of the loop is pointless. Signed-off-by:
Hannes Reinecke <hare@suse.de> Cc: Mike Miller <mike.miller@hp.com> Signed-off-by:
-
Ondrej Zajicek authored
commit 20e061fb Author: Ondrej Zajicek <santiago@crfreenet.org> Date: Mon Apr 28 02:15:18 2008 -0700 fbdev: framebuffer_alloc() fixes Correct the dev arg of framebuffer_alloc() in arkfb, s3fb and vt8623fb. causes a null-pointer deref because "info->dev is NULL, info was just kzallocated". Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Reported-by:
"MadLoisae@gmx.net" <MadLoisae@gmx.net> Tested-by:
-
Bernhard Walle authored
The current implementation reports the structure name as VMCOREINFO_OSRELEASE in VMCOREINFO, e.g. VMCOREINFO_OSRELEASE=init_uts_ns.name.release That doesn't make sense because it's always the same. Instead, use the value, e.g. VMCOREINFO_OSRELEASE=2.6.26-rc3 That's also what the 'makedumpfile -g' does. Signed-off-by:Bernhard Walle <bwalle@suse.de> Cc: "Ken'ichi Ohmichi" <oomichi@mxs.nes.nec.co.jp> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Anton Vorontsov authored
Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Andrew Morton authored
gcc-3.2: mm/mm_init.c:77:1: directives may not be used inside a macro argument mm/mm_init.c:76:47: unterminated argument list invoking macro "mminit_dprintk" mm/mm_init.c: In function `mminit_verify_pageflags_layout': mm/mm_init.c:80: `mminit_dprintk' undeclared (first use in this function) mm/mm_init.c:80: (Each undeclared identifier is reported only once mm/mm_init.c:80: for each function it appears in.) mm/mm_init.c:80: syntax error before numeric constant Also fix a typo in a comment. Reported-by:
Adrian Bunk <bunk@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: ->cable_detect method cannot be marked __devinit ide: ->quirkproc method cannot be marked __devinit cs5520: add enablebits checking cdrom: don't check CDC_PLAY_AUDIO in cdrom_count_tracks() ide-cd: fix endianity for the error message in cdrom_read_capacity ide: remove CONFIG_IDE_MAX_HWIFS remove unneeded #include <linux/ide.h>'s ide: fix regression caused by ide_device_{get,put}() addition (take 2) remove unnecessary <linux/hdreg.h> includes ide: sanitize struct ide_port_ops documentation (take 2) ide: fix ide_fix_driveid() ide: fix pre-EIDE SWDMA support on big-endian
-
Alan Stern authored
Okay, I found the cause of the hang. It is a simple bug in the USB scatter-gather library, caused by changes added in response to the S-G chaining modification. This patch (as1125) fixes a bug in the USB scatter-gather library. Early exit from the S-G initialization loop does not reset the count of outstanding URBs. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Cc: David Brownell <david-b@pacbell.net> Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Now that we have warm-plug support ->cable_detect method no longer can be be marked __devinit. Signed-off-by:Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Now that we have warm-plug support ->quirkproc method no longer can be be marked __devinit. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Based on sparse comments in OpenFirmware code (no Cx5510/Cx5520 datasheet here). This fixes 2.6.26 regression reported by TAKADA and caused by addition of warm-plug support. Tested-by:
TAKADA Yoshihito <takada@mbf.nifty.com> Signed-off-by:
-
Tejun Heo authored
According to MMC-3 (or any later versions) READ TOCs are mandatory commands and have nothing to do with CDC_PLAY_AUDIO. I have no idea why the check was put there in the first place but it now only breaks automatic actions on certain drives. Note that this test was only effective when ide-cdrom was being used as sr didn't mask CDC_PLAY_AUDIO according to the capabilities. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Jens Axboe <jens.axboe@oracle.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by:
-
Petr Tesarik authored
Aesthetic regards aside, commit e8e7b9eb still leaves a bug in the error message, because it uses the unconverted big-endian value for printk. Fix this by using a local variable in machine byte order. The result is correct, more readable, and also produces slightly shorter code on i386. Signed-off-by:
Petr Tesarik <ptesarik@suse.cz> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> Acked-by:
Borislav Petkov <petkovbb@gmail.com> [bart: __u32 -> u32] Signed-off-by:
-
Adrian Bunk authored
The benefits of a user settable CONFIG_IDE_MAX_HWIFS have become pretty tiny and are no longer considered worth the trouble of an own option. Simply always #define MAX_HWIFS to 10. Signed-off-by:
-
