Skip to content

L
linux
Switch branch/tag
  1. 03 Jun, 2021 19 commits
  3. 02 Jun, 2021 15 commits
    • Wong Vee Khee's avatar
      net: stmmac: fix issue where clk is being unprepared twice · ab00f3e0
      Wong Vee Khee authored 
      In the case of MDIO bus registration failure due to no external PHY
devices is connected to the MAC, clk_disable_unprepare() is called in
stmmac_bus_clk_config() and intel_eth_pci_probe() respectively.

The second call in intel_eth_pci_probe() will caused the following:-

[   16.578605] intel-eth-pci 0000:00:1e.5: No PHY found
[   16.583778] intel-eth-pci 0000:00:1e.5: stmmac_dvr_probe: MDIO bus (id: 2) registration failed
[   16.680181] ------------[ cut here ]------------
[   16.684861] stmmac-0000:00:1e.5 already disabled
[   16.689547] WARNING: CPU: 13 PID: 2053 at drivers/clk/clk.c:952 clk_core_disable+0x96/0x1b0
[   16.697963] Modules linked in: dwc3 iTCO_wdt mei_hdcp iTCO_vendor_support udc_core x86_pkg_temp_thermal kvm_intel marvell10g kvm sch_fq_codel nfsd irqbypass dwmac_intel(+) stmmac uio ax88179_178a pcs_xpcs phylink uhid spi_pxa2xx_platform usbnet mei_me pcspkr tpm_crb mii i2c_i801 dw_dmac dwc3_pci thermal dw_dmac_core intel_rapl_msr libphy i2c_smbus mei tpm_tis intel_th_gth tpm_tis_core tpm intel_th_acpi intel_pmc_core intel_th i915 fuse configfs snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_pcm snd_timer snd soundcore
[   16.746785] CPU: 13 PID: 2053 Comm: systemd-udevd Tainted: G     U            5.13.0-rc3-intel-lts #76
[   16.756134] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DRR4 CRB, BIOS ADLIFSI1.R00.1494.B00.2012031421 12/03/2020
[   16.769465] RIP: 0010:clk_core_disable+0x96/0x1b0
[   16.774222] Code: 00 8b 05 45 96 17 01 85 c0 7f 24 48 8b 5b 30 48 85 db 74 a5 8b 43 7c 85 c0 75 93 48 8b 33 48 c7 c7 6e 32 cc b7 e8 b2 5d 52 00 <0f> 0b 5b 5d c3 65 8b 05 76 31 18 49 89 c0 48 0f a3 05 bc 92 1a 01
[   16.793016] RSP: 0018:ffffa44580523aa0 EFLAGS: 00010086
[   16.798287] RAX: 0000000000000000 RBX: ffff8d7d0eb70a00 RCX: 0000000000000000
[   16.805435] RDX: 0000000000000002 RSI: ffffffffb7c62d5f RDI: 00000000ffffffff
[   16.812610] RBP: 0000000000000287 R08: 0000000000000000 R09: ffffa445805238d0
[   16.819759] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d7d0eb70a00
[   16.826904] R13: ffff8d7d027370c8 R14: 0000000000000006 R15: ffffa44580523ad0
[   16.834047] FS:  00007f9882fa2600(0000) GS:ffff8d80a0940000(0000) knlGS:0000000000000000
[   16.842177] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.847966] CR2: 00007f9882bea3d8 CR3: 000000010b126001 CR4: 0000000000370ee0
[   16.855144] Call Trace:
[   16.857614]  clk_core_disable_lock+0x1b/0x30
[   16.861941]  intel_eth_pci_probe.cold+0x11d/0x136 [dwmac_intel]
[   16.867913]  pci_device_probe+0xcf/0x150
[   16.871890]  really_probe+0xf5/0x3e0
[   16.875526]  driver_probe_device+0x64/0x150
[   16.879763]  device_driver_attach+0x53/0x60
[   16.883998]  __driver_attach+0x9f/0x150
[   16.887883]  ? device_driver_attach+0x60/0x60
[   16.892288]  ? device_driver_attach+0x60/0x60
[   16.896698]  bus_for_each_dev+0x77/0xc0
[   16.900583]  bus_add_driver+0x184/0x1f0
[   16.904469]  driver_register+0x6c/0xc0
[   16.908268]  ? 0xffffffffc07ae000
[   16.911598]  do_one_initcall+0x4a/0x210
[   16.915489]  ? kmem_cache_alloc_trace+0x305/0x4e0
[   16.920247]  do_init_module+0x5c/0x230
[   16.924057]  load_module+0x2894/0x2b70
[   16.927857]  ? __do_sys_finit_module+0xb5/0x120
[   16.932441]  __do_sys_finit_module+0xb5/0x120
[   16.936845]  do_syscall_64+0x42/0x80
[   16.940476]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   16.945586] RIP: 0033:0x7f98830e5ccd
[   16.949177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 31 0c 00 f7 d8 64 89 01 48
[   16.967970] RSP: 002b:00007ffc66b60168 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   16.975583] RAX: ffffffffffffffda RBX: 000055885de35ef0 RCX: 00007f98830e5ccd
[   16.982725] RDX: 0000000000000000 RSI: 00007f98832541e3 RDI: 0000000000000012
[   16.989868] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
[   16.997042] R10: 0000000000000012 R11: 0000000000000246 R12: 00007f98832541e3
[   17.004222] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc66b60328
[   17.011369] ---[ end trace df06a3dab26b988c ]---
[   17.016062] ------------[ cut here ]------------
[   17.020701] stmmac-0000:00:1e.5 already unprepared

Removing the stmmac_bus_clks_config() call in stmmac_dvr_probe and let
dwmac-intel to handle the unprepare and disable of the clk device.

Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver")
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: default avatarWong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: default avatarJoakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab00f3e0
    • Josh Triplett's avatar
      net: ipconfig: Don't override command-line hostnames or domains · b508d5fb
      Josh Triplett authored 
      If the user specifies a hostname or domain name as part of the ip=
command-line option, preserve it and don't overwrite it with one
supplied by DHCP/BOOTP.

For instance, ip=::::myhostname::dhcp will use "myhostname" rather than
ignoring and overwriting it.

Fix the comment on ic_bootp_string that suggests it only copies a string
"if not already set"; it doesn't have any such logic.
Signed-off-by: default avatarJosh Triplett <josh@joshtriplett.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b508d5fb
    • David S. Miller's avatar
      Merge tag 'mlx5-fixes-2021-06-01' of git://git.kernel.org/pub/scm/linu · dd627662
      David S. Miller authored 
      x/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2021-06-01

This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dd627662
    • Daniel Borkmann's avatar
      bpf, lockdown, audit: Fix buggy SELinux lockdown permission checks · ff40e510
      Daniel Borkmann authored 
      Commit 59438b46 ("security,lockdown,selinux: implement SELinux lockdown")
added an implementation of the locked_down LSM hook to SELinux, with the aim
to restrict which domains are allowed to perform operations that would breach
lockdown. This is indirectly also getting audit subsystem involved to report
events. The latter is problematic, as reported by Ondrej and Serhei, since it
can bring down the whole system via audit:

  1) The audit events that are triggered due to calls to security_locked_down()
     can OOM kill a machine, see below details [0].

  2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit()
     when trying to wake up kauditd, for example, when using trace_sched_switch()
     tracepoint, see details in [1]. Triggering this was not via some hypothetical
     corner case, but with existing tools like runqlat & runqslower from bcc, for
     example, which make use of this tracepoint. Rough call sequence goes like:

     rq_lock(rq) -> -------------------------+
       trace_sched_switch() ->               |
         bpf_prog_xyz() ->                   +-> deadlock
           selinux_lockdown() ->             |
             audit_log_end() ->              |
               wake_up_interruptible() ->    |
                 try_to_wake_up() ->         |
                   rq_lock(rq) --------------+

What's worse is that the intention of 59438b46 to further restrict lockdown
settings for specific applications in respect to the global lockdown policy is
completely broken for BPF. The SELinux policy rule for the current lockdown check
looks something like this:

  allow <who> <who> : lockdown { <reason> };

However, this doesn't match with the 'current' task where the security_locked_down()
is executed, example: httpd does a syscall. There is a tracing program attached
to the syscall which triggers a BPF program to run, which ends up doing a
bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does
the permission check against 'current', that is, httpd in this example. httpd
has literally zero relation to this tracing program, and it would be nonsensical
having to write an SELinux policy rule against httpd to let the tracing helper
pass. The policy in this case needs to be against the entity that is installing
the BPF program. For example, if bpftrace would generate a histogram of syscall
counts by user space application:

  bpftrace -e 'tracepoint:raw_syscalls:sys_enter { @[comm] = count(); }'

bpftrace would then go and generate a BPF program from this internally. One way
of doing it [for the sake of the example] could be to call bpf_get_current_task()
helper and then access current->comm via one of bpf_probe_read_kernel{,_str}()
helpers. So the program itself has nothing to do with httpd or any other random
app doing a syscall here. The BPF program _explicitly initiated_ the lockdown
check. The allow/deny policy belongs in the context of bpftrace: meaning, you
want to grant bpftrace access to use these helpers, but other tracers on the
system like my_random_tracer _not_.

Therefore fix all three issues at the same time by taking a completely different
approach for the security_locked_down() hook, that is, move the check into the
program verification phase where we actually retrieve the BPF func proto. This
also reliably gets the task (current) that is trying to install the BPF tracing
program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since
we're moving this out of the BPF helper's fast-path which can be called several
millions of times per second.

The check is then also in line with other security_locked_down() hooks in the
system where the enforcement is performed at open/load time, for example,
open_kcore() for /proc/kcore access or module_sig_check() for module signatures
just to pick few random ones. What's out of scope in the fix as well as in
other security_locked_down() hook locations /outside/ of BPF subsystem is that
if the lockdown policy changes on the fly there is no retrospective action.
This requires a different discussion, potentially complex infrastructure, and
it's also not clear whether this can be solved generically. Either way, it is
out of scope for a suitable stable fix which this one is targeting. Note that
the breakage is specifically on 59438b46 where it started to rely on 'current'
as UAPI behavior, and _not_ earlier infrastructure such as 9d1f8be5 ("bpf:
Restrict bpf when kernel lockdown is in confidentiality mode").

[0] https://bugzilla.redhat.com/show_bug.cgi?id=1955585, Jakub Hrozek says:

  I starting seeing this with F-34. When I run a container that is traced with
  BPF to record the syscalls it is doing, auditd is flooded with messages like:

  type=AVC msg=audit(1619784520.593:282387): avc:  denied  { confidentiality }
    for pid=476 comm="auditd" lockdown_reason="use of bpf to read kernel RAM"
      scontext=system_u:system_r:auditd_t:s0 tcontext=system_u:system_r:auditd_t:s0
        tclass=lockdown permissive=0

  This seems to be leading to auditd running out of space in the backlog buffer
  and eventually OOMs the machine.

  [...]
  auditd running at 99% CPU presumably processing all the messages, eventually I get:
  Apr 30 12:20:42 fedora kernel: audit: backlog limit exceeded
  Apr 30 12:20:42 fedora kernel: audit: backlog limit exceeded
  Apr 30 12:20:42 fedora kernel: audit: audit_backlog=2152579 > audit_backlog_limit=64
  Apr 30 12:20:42 fedora kernel: audit: audit_backlog=2152626 > audit_backlog_limit=64
  Apr 30 12:20:42 fedora kernel: audit: audit_backlog=2152694 > audit_backlog_limit=64
  Apr 30 12:20:42 fedora kernel: audit: audit_lost=6878426 audit_rate_limit=0 audit_backlog_limit=64
  Apr 30 12:20:45 fedora kernel: oci-seccomp-bpf invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=-1000
  Apr 30 12:20:45 fedora kernel: CPU: 0 PID: 13284 Comm: oci-seccomp-bpf Not tainted 5.11.12-300.fc34.x86_64 #1
  Apr 30 12:20:45 fedora kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
  [...]

[1] https://lore.kernel.org/linux-audit/CANYvDQN7H5tVp47fbYcRasv4XF07eUbsDwT_eDCHXJUj43J7jQ@mail.gmail.com/,
    Serhei Makarov says:

  Upstream kernel 5.11.0-rc7 and later was found to deadlock during a
  bpf_probe_read_compat() call within a sched_switch tracepoint. The problem
  is reproducible with the reg_alloc3 testcase from SystemTap's BPF backend
  testsuite on x86_64 as well as the runqlat, runqslower tools from bcc on
  ppc64le. Example stack trace:

  [...]
  [  730.868702] stack backtrace:
  [  730.869590] CPU: 1 PID: 701 Comm: in:imjournal Not tainted, 5.12.0-0.rc2.20210309git144c79ef.166.fc35.x86_64 #1
  [  730.871605] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  [  730.873278] Call Trace:
  [  730.873770]  dump_stack+0x7f/0xa1
  [  730.874433]  check_noncircular+0xdf/0x100
  [  730.875232]  __lock_acquire+0x1202/0x1e10
  [  730.876031]  ? __lock_acquire+0xfc0/0x1e10
  [  730.876844]  lock_acquire+0xc2/0x3a0
  [  730.877551]  ? __wake_up_common_lock+0x52/0x90
  [  730.878434]  ? lock_acquire+0xc2/0x3a0
  [  730.879186]  ? lock_is_held_type+0xa7/0x120
  [  730.880044]  ? skb_queue_tail+0x1b/0x50
  [  730.880800]  _raw_spin_lock_irqsave+0x4d/0x90
  [  730.881656]  ? __wake_up_common_lock+0x52/0x90
  [  730.882532]  __wake_up_common_lock+0x52/0x90
  [  730.883375]  audit_log_end+0x5b/0x100
  [  730.884104]  slow_avc_audit+0x69/0x90
  [  730.884836]  avc_has_perm+0x8b/0xb0
  [  730.885532]  selinux_lockdown+0xa5/0xd0
  [  730.886297]  security_locked_down+0x20/0x40
  [  730.887133]  bpf_probe_read_compat+0x66/0xd0
  [  730.887983]  bpf_prog_250599c5469ac7b5+0x10f/0x820
  [  730.888917]  trace_call_bpf+0xe9/0x240
  [  730.889672]  perf_trace_run_bpf_submit+0x4d/0xc0
  [  730.890579]  perf_trace_sched_switch+0x142/0x180
  [  730.891485]  ? __schedule+0x6d8/0xb20
  [  730.892209]  __schedule+0x6d8/0xb20
  [  730.892899]  schedule+0x5b/0xc0
  [  730.893522]  exit_to_user_mode_prepare+0x11d/0x240
  [  730.894457]  syscall_exit_to_user_mode+0x27/0x70
  [  730.895361]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [...]

Fixes: 59438b46 ("security,lockdown,selinux: implement SELinux lockdown")
Reported-by: default avatarOndrej Mosnacek <omosnace@redhat.com>
Reported-by: default avatarJakub Hrozek <jhrozek@redhat.com>
Reported-by: default avatarSerhei Makarov <smakarov@redhat.com>
Reported-by: default avatarJiri Olsa <jolsa@redhat.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Tested-by: default avatarJiri Olsa <jolsa@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jamorris@linux.microsoft.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Frank Eigler <fche@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/bpf/01135120-8bf7-df2e-cff0-1d73f1f841c3@iogearbox.net
      ff40e510
    • Pablo Neira Ayuso's avatar
      netfilter: nfnetlink_cthelper: hit EBUSY on updates if size mismatches · 8971ee8b
      Pablo Neira Ayuso authored 
      The private helper data size cannot be updated. However, updates that
contain NFCTH_PRIV_DATA_LEN might bogusly hit EBUSY even if the size is
the same.

Fixes: 12f7a505 ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      8971ee8b
    • Pablo Neira Ayuso's avatar
      netfilter: nft_ct: skip expectations for confirmed conntrack · 1710eb91
      Pablo Neira Ayuso authored 
      nft_ct_expect_obj_eval() calls nf_ct_ext_add() for a confirmed
conntrack entry. However, nf_ct_ext_add() can only be called for
!nf_ct_is_confirmed().

[ 1825.349056] WARNING: CPU: 0 PID: 1279 at net/netfilter/nf_conntrack_extend.c:48 nf_ct_xt_add+0x18e/0x1a0 [nf_conntrack]
[ 1825.351391] RIP: 0010:nf_ct_ext_add+0x18e/0x1a0 [nf_conntrack]
[ 1825.351493] Code: 41 5c 41 5d 41 5e 41 5f c3 41 bc 0a 00 00 00 e9 15 ff ff ff ba 09 00 00 00 31 f6 4c 89 ff e8 69 6c 3d e9 eb 96 45 31 ed eb cd <0f> 0b e9 b1 fe ff ff e8 86 79 14 e9 eb bf 0f 1f 40 00 0f 1f 44 00
[ 1825.351721] RSP: 0018:ffffc90002e1f1e8 EFLAGS: 00010202
[ 1825.351790] RAX: 000000000000000e RBX: ffff88814f5783c0 RCX: ffffffffc0e4f887
[ 1825.351881] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88814f578440
[ 1825.351971] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff88814f578447
[ 1825.352060] R10: ffffed1029eaf088 R11: 0000000000000001 R12: ffff88814f578440
[ 1825.352150] R13: ffff8882053f3a00 R14: 0000000000000000 R15: 0000000000000a20
[ 1825.352240] FS:  00007f992261c900(0000) GS:ffff889faec00000(0000) knlGS:0000000000000000
[ 1825.352343] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1825.352417] CR2: 000056070a4d1158 CR3: 000000015efe0000 CR4: 0000000000350ee0
[ 1825.352508] Call Trace:
[ 1825.352544]  nf_ct_helper_ext_add+0x10/0x60 [nf_conntrack]
[ 1825.352641]  nft_ct_expect_obj_eval+0x1b8/0x1e0 [nft_ct]
[ 1825.352716]  nft_do_chain+0x232/0x850 [nf_tables]

Add the ct helper extension only for unconfirmed conntrack. Skip rule
evaluation if the ct helper extension does not exist. Thus, you can
only create expectations from the first packet.

It should be possible to remove this limitation by adding a new action
to attach a generic ct helper to the first packet. Then, use this ct
helper extension from follow up packets to create the ct expectation.

While at it, add a missing check to skip the template conntrack too
and remove check for IPCT_UNTRACK which is implicit to !ct.

Fixes: 857b4602 ("netfilter: nft_ct: add ct expectations support")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      1710eb91
    • Yevgeny Kliteynik's avatar
      net/mlx5: DR, Create multi-destination flow table with level less than 64 · 216214c6
      Yevgeny Kliteynik authored 
      Flow table that contains flow pointing to multiple flow tables or multiple
TIRs must have a level lower than 64. In our case it applies to muli-
destination flow table.
Fix the level of the created table to comply with HW Spec definitions, and
still make sure that its level lower than SW-owned tables, so that it
would be possible to point from the multi-destination FW table to SW
tables.

Fixes: 34583bee ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: default avatarYevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: default avatarAlex Vesker <valex@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      216214c6
    • Aya Levin's avatar
      net/mlx5e: Fix conflict with HW TS and CQE compression · 5349cbba
      Aya Levin authored 
      When a driver's profile doesn't support a dedicated PTP-RQ,
configuration of CQE compression while HW TS is configured should fail.

Fixes: 885b8cfb ("net/mlx5e: Update ethtool setting of CQE compression")
Signed-off-by: default avatarAya Levin <ayal@nvidia.com>
Reviewed-by: default avatarMoshe Shemesh <moshe@nvidia.com>
Reviewed-by: default avatarTariq Toukan <tariqt@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      5349cbba
    • Aya Levin's avatar
      net/mlx5e: Fix HW TS with CQE compression according to profile · 256f79d1
      Aya Levin authored 
      When the driver's profile doesn't support a dedicated PTP-RQ, the PTP
accuracy of HW TS is affected by the CQE compression. In this case,
turn off CQE compression. Otherwise, the driver crashes:

BUG: kernel NULL pointer dereference, address:0000000000000018
...
...
RIP: 0010:mlx5e_ptp_rx_set_fs+0x25/0x1a0 [mlx5_core]
...
...
Call Trace:
 mlx5e_ptp_activate_channel+0xb2/0xf0 [mlx5_core]
 mlx5e_activate_priv_channels+0x3b9/0x8c0 [mlx5_core]
 ? __mutex_unlock_slowpath+0x45/0x2a0
 ? mlx5e_refresh_tirs+0x151/0x1e0 [mlx5_core]
 mlx5e_switch_priv_channels+0x1cd/0x2d0 [mlx5_core]
 ? mlx5e_xdp_allowed+0x150/0x150 [mlx5_core]
 mlx5e_safe_switch_params+0x118/0x3c0 [mlx5_core]
 ? __mutex_lock+0x6e/0x8e0
 ? mlx5e_hwstamp_set+0xa9/0x300 [mlx5_core]
 mlx5e_hwstamp_set+0x194/0x300 [mlx5_core]
 ? dev_ioctl+0x9b/0x3d0
 mlx5i_ioctl+0x37/0x60 [mlx5_core]
 mlx5i_pkey_ioctl+0x12/0x20 [mlx5_core]
 dev_ioctl+0xa9/0x3d0
 sock_ioctl+0x268/0x420
 __x64_sys_ioctl+0x3d8/0x790
 ? lockdep_hardirqs_on_prepare+0xe4/0x190
 do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 960fbfe2 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP")
Signed-off-by: default avatarAya Levin <ayal@nvidia.com>
Reviewed-by: default avatarMoshe Shemesh <moshe@nvidia.com>
Reviewed-by: default avatarTariq Toukan <tariqt@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      256f79d1
    • Roi Dayan's avatar
      net/mlx5e: Fix adding encap rules to slow path · 2a2c84fa
      Roi Dayan authored 
      On some devices the ignore flow level cap is not supported and we
shouldn't use it. Setting the dest ft with mlx5_chains_get_tc_end_ft()
already gives the correct end ft if ignore flow level cap is supported
or not.

Fixes: 39ac237c ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: default avatarRoi Dayan <roid@nvidia.com>
Reviewed-by: default avatarPaul Blakey <paulb@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      2a2c84fa
    • Roi Dayan's avatar
      net/mlx5e: Check for needed capability for cvlan matching · afe93f71
      Roi Dayan authored 
      If not supported show an error and return instead of trying to offload
to the hardware and fail.

Fixes: 699e96dd ("net/mlx5e: Support offloading tc double vlan headers match")
Reported-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: default avatarRoi Dayan <roid@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      afe93f71
    • Moshe Shemesh's avatar
      net/mlx5: Check firmware sync reset requested is set before trying to abort it · 5940e642
      Moshe Shemesh authored 
      In case driver sent NACK to firmware on sync reset request, it will get
sync reset abort event while it didn't set sync reset requested mode.
Thus, on abort sync reset event handler, driver should check reset
requested is set before trying to stop sync reset poll.

Fixes: 7dd6df32 ("net/mlx5: Handle sync reset abort event")
Signed-off-by: default avatarMoshe Shemesh <moshe@nvidia.com>
Reviewed-by: default avatarTariq Toukan <tariqt@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      5940e642
    • Roi Dayan's avatar
      net/mlx5e: Disable TLS offload for uplink representor · b38742e4
      Roi Dayan authored 
      TLS offload is not supported in switchdev mode.

Fixes: 7a9fb35e ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: default avatarRoi Dayan <roid@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      b38742e4
    • Aya Levin's avatar
      net/mlx5e: Fix incompatible casting · d8ec9200
      Aya Levin authored 
      Device supports setting of a single fec mode at a time, enforce this
by bitmap_weight == 1. Input from fec command is in u32, avoid cast to
unsigned long and use bitmap_from_arr32 to populate bitmap safely.

Fixes: 4bd9d507 ("net/mlx5e: Enforce setting of a single FEC mode")
Signed-off-by: default avatarAya Levin <ayal@nvidia.com>
Reviewed-by: default avatarTariq Toukan <tariqt@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      d8ec9200
    • Joe Perches's avatar
      MAINTAINERS: nfc mailing lists are subscribers-only · b0003726
      Joe Perches authored 
      It looks as if the MAINTAINERS entries for the nfc mailing list
should be updated as I just got a "rejected" bounce from the nfc list.

-------
Your message to the Linux-nfc mailing-list was rejected for the following
reasons:

The message is not from a list member
-------
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0003726
  5. 01 Jun, 2021 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7