The sd_group field moved in the HW spec from the MPIR register
to the vport context.
Align the query accordingly.

Fixes: f5e95632 ("net/mlx5: Expose Management PCIe Index Register (MPIR)")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commit moved the code of mlx5e_create_tises() and changed the
loop to create TISes over MLX5_MAX_PORTS constant value, instead of
getting the correct lag ports supported by the device, which can cause
FW errors on devices with less than MLX5_MAX_PORTS ports.

Change that back to mlx5e_get_num_lag_ports(mdev).

Also IPoIB interfaces create there own TISes, they don't use the eth
TISes, pass a flag to indicate that.

Fixes: b25bd37c ("net/mlx5: Move TISes from priv to mdev HW resources")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Victor Nogueira says:

====================
net: sched: Make tc-related drop reason more flexible for remaining qdiscs

This patch builds on Daniel's patch[1] to add initial support of tc drop
reason. The main goal is to distinguish between policy and error drops for
the remainder of the egress qdiscs (other than clsact).
The drop reason is set by cls_api and act_api in the tc skb cb in case
any error occurred in the data path.

Also add new skb drop reasons that are idiosyncratic to TC.

[1] https://lore.kernel.org/all/20231009092655.22025-1-daniel@iogearbox.net

Changes in V5:
- Drop "EXT_" from cookie error's drop reason name in doc

Changes in V4:
- Condense all the cookie drop reasons into one

Changes in V3:
- Removed duplicate assignment
- Rename function tc_skb_cb_drop_reason to tcf_get_drop_reason
- Move zone field upwards in struct tc_skb_cb to move hole to the end of
  the struct

Changes in V2:
- Dropped RFC tag
- Removed check for drop reason being overwritten by filter in cls_api.c
- Simplified logic and removed function tcf_init_drop_reason
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Continue expanding Daniel's patch by adding new skb drop reasons that
are idiosyncratic to TC.

More specifically:

- SKB_DROP_REASON_TC_COOKIE_ERROR: An error occurred whilst
  processing a tc ext cookie.

- SKB_DROP_REASON_TC_CHAIN_NOTFOUND: tc chain lookup failed.

- SKB_DROP_REASON_TC_RECLASSIFY_LOOP: tc exceeded max reclassify loop
  iterations
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Incrementing on Daniel's patch[1], make tc-related drop reason more
flexible for remaining qdiscs - that is, all qdiscs aside from clsact.
In essence, the drop reason will be set by cls_api and act_api in case
any error occurred in the data path. With that, we can give the user more
detailed information so that they can distinguish between a policy drop
or an error drop.

[1] https://lore.kernel.org/all/20231009092655.22025-1-daniel@iogearbox.netSigned-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move drop_reason from struct tcf_result to skb cb - more specifically to
struct tc_skb_cb. With that, we'll be able to also set the drop reason for
the remaining qdiscs (aside from clsact) that do not have access to
tcf_result when time comes to set the skb drop reason.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for the LED's on most chip versions. Excluded are
the old non-PCIe versions and RTL8125. RTL8125 has a different LED
register layout, support for it will follow later.

LED's can be controlled from userspace using the netdev LED trigger.

Tested on RTL8168h.

Note: The driver can't know which LED's are actually physically
wired. Therefore not every LED device may represent a physically
available LED.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
Add MDB bulk deletion support

This patchset adds MDB bulk deletion support, allowing user space to
request the deletion of matching entries instead of dumping the entire
MDB and issuing a separate deletion request for each matching entry.
Support is added in both the bridge and VXLAN drivers in a similar
fashion to the existing FDB bulk deletion support.

The parameters according to which bulk deletion can be performed are
similar to the FDB ones, namely: Destination port, VLAN ID, state (e.g.,
"permanent"), routing protocol, source / destination VNI, destination IP
and UDP port. Flushing based on flags (e.g., "offload", "fast_leave",
"added_by_star_ex", "blocked") is not currently supported, but can be
added in the future, if a use case arises.

Patch #1 adds a new uAPI attribute to allow specifying the state mask
according to which bulk deletion will be performed, if any.

Patch #2 adds a new policy according to which bulk deletion requests
(with 'NLM_F_BULK' flag set) will be parsed.

Patches #3-#4 add a new NDO for MDB bulk deletion and invoke it from the
rtnetlink code when a bulk deletion request is made.

Patches #5-#6 implement the MDB bulk deletion NDO in the bridge and
VXLAN drivers, respectively.

Patch #7 allows user space to issue MDB bulk deletion requests by no
longer rejecting the 'NLM_F_BULK' flag when it is set in 'RTM_DELMDB'
requests.

Patches #8-#9 add selftests for both drivers, for both good and bad
flows.

iproute2 changes can be found here [1].

https://github.com/idosch/iproute2/tree/submit/mdb_flush_v1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add test cases to verify the behavior of the MDB bulk deletion
functionality in the VXLAN driver.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add test cases to verify the behavior of the MDB bulk deletion
functionality in the bridge driver.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that both the common code as well as individual drivers support MDB
bulk deletion, allow user space to make such requests.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement MDB bulk deletion support in the VXLAN driver, allowing MDB
entries to be deleted in bulk according to provided parameters.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement MDB bulk deletion support in the bridge driver, allowing MDB
entries to be deleted in bulk according to provided parameters.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Invoke the new MDB bulk deletion device operation when the 'NLM_F_BULK'
flag is set in the netlink message header.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MDB net device operation that will be invoked by rtnetlink code in
response to received 'RTM_DELMDB' messages with the 'NLM_F_BULK' flag
set. Subsequent patches will implement the operation in the bridge and
VXLAN drivers.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

For MDB bulk delete we will need to validate 'MDBA_SET_ENTRY'
differently compared to regular delete. Specifically, allow the ifindex
to be zero (in case not filtering on bridge port) and force the address
to be zero as bulk delete based on address is not supported.

Do that by introducing a new policy and choosing the correct policy
based on the presence of the 'NLM_F_BULK' flag in the netlink message
header. Use nlmsg_parse() for strict validation.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the 'state' field in 'struct br_port_msg' can be set to 1 if
the MDB entry is permanent or 0 if it is temporary. Additional states
might be added in the future.

In a similar fashion to 'NDA_NDM_STATE_MASK', add an MDB state mask uAPI
attribute that will allow the upcoming bulk deletion API to bulk delete
MDB entries with a certain state or any state.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Maintain Consistent Formatting: Insert Space after #include
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-12-19

Hi David, hi Jakub, hi Paolo, hi Eric,

The following pull-request contains BPF updates for your *net-next* tree.

We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 40 files changed, 642 insertions(+), 2926 deletions(-).

The main changes are:

1) Revert all of BPF token-related patches for now as per list discussion [0],
   from Andrii Nakryiko.

   [0] https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com

2) Fix a syzbot-reported use-after-free read in nla_find() triggered from
   bpf_skb_get_nlattr_nest() helper, from Jakub Kicinski.

bpf-next-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
  Revert BPF token-related functionality
  bpf: Use nla_ok() instead of checking nla_len directly
====================

Link: https://lore.kernel.org/r/20231219170359.11035-1-daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This patch includes the following revert (one  conflicting BPF FS
patch and three token patch sets, represented by merge commits):
  - revert 0f5d5454 "Merge branch 'bpf-fs-mount-options-parsing-follow-ups'";
  - revert 750e7857 "bpf: Support uid and gid when mounting bpffs";
  - revert 73376328 "Merge branch 'bpf-token-support-in-libbpf-s-bpf-object'";
  - revert c35919dc "Merge branch 'bpf-token-and-bpf-fs-based-delegation'".

Link: https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.comSigned-off-by: Andrii Nakryiko <andrii@kernel.org>

Jiri Pirko says:

====================
devlink: introduce notifications filtering

From: Jiri Pirko <jiri@nvidia.com>

Currently the user listening on a socket for devlink notifications
gets always all messages for all existing devlink instances and objects,
even if he is interested only in one of those. That may cause
unnecessary overhead on setups with thousands of instances present.

User is currently able to narrow down the devlink objects replies
to dump commands by specifying select attributes.

Allow similar approach for notifications providing user a new
notify-filter-set command to select attributes with values
the notification message has to match. In that case, it is delivered
to the socket.

Note that the filtering is done per-socket, so multiple users may
specify different selection of attributes with values.

This patchset initially introduces support for following attributes:
DEVLINK_ATTR_BUS_NAME
DEVLINK_ATTR_DEV_NAME
DEVLINK_ATTR_PORT_INDEX

Patches #1 - #4 are preparations in devlink code, patch #3 is
                an optimization done on the way.
Patches #5 - #7 are preparations in netlink and generic netlink code.
Patch #8 is the main one in this set implementing of
         the notify-filter-set command and the actual
         per-socket filtering.
Patch #9 extends the infrastructure allowing to filter according
         to a port index.

Example:
$ devlink mon port pci/0000:08:00.0/32768
[port,new] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable
[port,new] pci/0000:08:00.0/32768: type eth flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable
[port,new] pci/0000:08:00.0/32768: type eth netdev eth3 flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable
[port,new] pci/0000:08:00.0/32768: type eth netdev eth3 flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable
[port,new] pci/0000:08:00.0/32768: type eth flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable
[port,new] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable
[port,del] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false
  function:
    hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable
====================

Link: https://lore.kernel.org/r/20231216123001.1293639-1-jiri@resnulli.usSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Expose the previously introduced notification multicast messages
filtering infrastructure and allow the user to select messages using
port index.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently the user listening on a socket for devlink notifications
gets always all messages for all existing instances, even if he is
interested only in one of those. That may cause unnecessary overhead
on setups with thousands of instances present.

User is currently able to narrow down the devlink objects replies
to dump commands by specifying select attributes.

Allow similar approach for notifications. Introduce a new devlink
NOTIFY_FILTER_SET which the user passes the select attributes. Store
these per-socket and use them for filtering messages
during multicast send.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently it is possible for netlink kernel user to pass custom
filter function to broadcast send function netlink_broadcast_filtered().
However, this is not exposed to multicast send and to generic
netlink users.

Extend the api and introduce a netlink helper nlmsg_multicast_filtered()
and a generic netlink helper genlmsg_multicast_netns_filtered()
to allow generic netlink families to specify filter function
while sending multicast messages.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Make the code using filter function a bit nicer by consolidating the
filter function arguments using typedef.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Introduce an xarray for Generic netlink family to store per-socket
private. Initialize this xarray only if family uses per-socket privs.

Introduce genl_sk_priv_get() to get the socket priv pointer for a family
and initialize it in case it does not exist.
Introduce __genl_sk_priv_get() to obtain socket priv pointer for a
family under RCU read lock.

Allow family to specify the priv size, init() and destroy() callbacks.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Introduce a helper devlink_nl_notify_send() so each object notification
function does not have to call genlmsg_multicast_netns() with the same
arguments.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Introduce devlink_nl_notify_need() helper and using it to check at the
beginning of notification functions to avoid overhead of composing
notification messages in case nobody listens.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Introduce __devl_is_registered() which does not assert on devlink
instance lock and use it in notifications which may be called
without devlink instance lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Instead of checking the xarray mark directly using xa_get_mark() helper
use devl_is_registered() helper which wraps it up. Note that there are
couple more users of xa_get_mark() left which are going to be handled
by the next patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

nla_len may also be too short to be sane, in which case after
recent changes nla_len() will return a wrapped value.

Fixes: 172db56d ("netlink: Return unsigned value for nla_len()")
Reported-by: syzbot+f43a23b6e622797c7a28@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/bpf/20231218231904.260440-1-kuba@kernel.org

Shinas Rasheed says:

====================
add PF-VF mailbox support

This patchset aims to add PF-VF mailbox support, its related
version support, and relevant control net support for immediate
functionalities such as firmware notifications to VF.

Changes:
V6:
  - Fixed 1/4 patch to apply to top of net-next merged with net fixes

V5: https://lore.kernel.org/all/20231214164536.2670006-1-srasheed@marvell.com/
  - Refactored patches to cut out redundant changes in 1/4 patch.

V4: https://lore.kernel.org/all/20231213035816.2656851-1-srasheed@marvell.com/
  - Included tag [1/4] in subject of first patch of series which was
    lost in V3

V3: https://lore.kernel.org/all/20231211063355.2630028-1-srasheed@marvell.com/
  - Corrected error cleanup logic for PF-VF mbox setup
  - Removed double inclusion of types.h header file in octep_pfvf_mbox.c

V2: https://lore.kernel.org/all/20231209081450.2613561-1-srasheed@marvell.com/
  - Removed unused variable in PATCH 1/4

V1: https://lore.kernel.org/all/20231208070352.2606192-1-srasheed@marvell.com/
====================

Link: https://lore.kernel.org/r/20231215181425.2681426-1-srasheed@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Notifications from firmware to vf has to pass through PF
control mbox and via PF-VF mailboxes. The notifications have to
be parsed out from the control mbox and passed to the
PF-VF mailbox in order to reach the corresponding VF.
Version compatibility should also be checked before messages
are passed to the mailboxes.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Inquire firmware on supported offloads, as well as convey offloads
enabled dynamically to firmware for the VFs. Implement control net API
to support the same.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add PF-VF mailbox initial version support
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Implement mailbox communication between PF and VFs.
PF-VF mailbox is used for all control commands from VF to PF and
asynchronous notification messages from PF to VF.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2023-12-18

This PR is larger than usual and contains changes in various parts
of the kernel.

The main changes are:

1) Fix kCFI bugs in BPF, from Peter Zijlstra.

End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.

2) Introduce BPF token object, from Andrii Nakryiko.

It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.

Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
             -o delegate_cmds=prog_load:MAP_CREATE \
             -o delegate_progs=kprobe \
             -o delegate_attachs=xdp

3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.

 - Complete precision tracking support for register spills
 - Fix verification of possibly-zero-sized stack accesses
 - Fix access to uninit stack slots
 - Track aligned STACK_ZERO cases as imprecise spilled registers.
   It improves the verifier "instructions processed" metric from single
   digit to 50-60% for some programs.
 - Fix verifier retval logic

4) Support for VLAN tag in XDP hints, from Larysa Zaremba.

5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.

End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.

6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.

7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.

It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.

8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.

9) BPF file verification via fsverity, from Song Liu.

It allows BPF progs get fsverity digest.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
  bpf: Ensure precise is reset to false in __mark_reg_const_zero()
  selftests/bpf: Add more uprobe multi fail tests
  bpf: Fail uprobe multi link with negative offset
  selftests/bpf: Test the release of map btf
  s390/bpf: Fix indirect trampoline generation
  selftests/bpf: Temporarily disable dummy_struct_ops test on s390
  x86/cfi,bpf: Fix bpf_exception_cb() signature
  bpf: Fix dtor CFI
  cfi: Add CFI_NOSEAL()
  x86/cfi,bpf: Fix bpf_struct_ops CFI
  x86/cfi,bpf: Fix bpf_callback_t CFI
  x86/cfi,bpf: Fix BPF JIT call
  cfi: Flip headers
  selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
  selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
  selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
  bpf: Limit the number of kprobes when attaching program to multiple kprobes
  bpf: Limit the number of uprobes when attaching program to multiple uprobes
  bpf: xdp: Register generic_kfunc_set with XDP programs
  selftests/bpf: utilize string values for delegate_xxx mount options
  ...
====================

Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.8

The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.

Major changes:

cfg80211/mac80211
 * AMD ACPI based Wifi band RFI (WBRF) mitigation feature
 * Basic Service Set (BSS) usage reporting
 * TID to link mapping support
 * mac80211 hardware flag to disallow puncturing

iwlwifi
 * new debugfs file fw_dbg_clear

mt76
 * NVMEM EEPROM improvements
 * mt7996 Extremely High Throughpu (EHT) improvements
 * mt7996 Wireless Ethernet Dispatcher (WED) support
 * mt7996 36-bit DMA support

ath12k
 * support one MSI vector
 * WCN7850: support AP mode

* tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
  wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings
  wifi: ath11k: workaround too long expansion sparse warnings
  Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ"
  wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor()
  wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up
  wifi: rtw89: add DBCC H2C to notify firmware the status
  wifi: rtw89: mac: add suffix _ax to MAC functions
  wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled
  wifi: rtw89: 8922a: add power on/off functions
  wifi: rtw89: add XTAL SI for WiFi 7 chips
  wifi: rtw89: phy: print out RFK log with formatted string
  wifi: rtw89: parse and print out RFK log from C2H events
  wifi: rtw89: add C2H event handlers of RFK log and report
  wifi: rtw89: load RFK log format string from firmware file
  wifi: rtw89: fw: add version field to BB MCU firmware element
  wifi: rtw89: fw: load TX power track tables from fw_element
  wifi: mwifiex: configure BSSID consistently when starting AP
  wifi: mwifiex: add extra delay for firmware ready
  wifi: mac80211: sta_info.c: fix sentence grammar
  wifi: mac80211: rx.c: fix sentence grammar
  ...
====================

Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It is safe to always start with imprecise SCALAR_VALUE register.
Previously __mark_reg_const_zero() relied on caller to reset precise
mark, but it's very error prone and we already missed it in a few
places. So instead make __mark_reg_const_zero() reset precision always,
as it's a safe default for SCALAR_VALUE. Explanation is basically the
same as for why we are resetting (or rather not setting) precision in
current state. If necessary, precision propagation will set it to
precise correctly.

As such, also remove a big comment about forward precision propagation
in mark_reg_stack_read() and avoid unnecessarily setting precision to
true after reading from STACK_ZERO stack. Again, precision propagation
will correctly handle this, if that SCALAR_VALUE register will ever be
needed to be precise.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231218173601.53047-1-andrii@kernel.org

Donald Hunter says:

====================
tools/net/ynl: Add 'sub-message' support to ynl

This patchset adds a 'sub-message' attribute type to the netlink-raw
schema and implements it in ynl. This provides support for kind-specific
options attributes as used in rt_link and tc raw netlink families.

A description of the new 'sub-message' attribute type and the
corresponding sub-message definitions is provided in patch 3.

The patchset includes updates to the rt_link spec and a new tc spec that
make use of the new 'sub-message' attribute type.

As mentioned in patch 4, encode support is not yet implemented in ynl
and support for sub-message selectors at a different nest level from the
key attribute is not yet supported. I plan to work on these in follow-up
patches.

Patches 1 is code cleanup in ynl
Patches 2-4 add sub-message support to the schema and ynl with
documentation updates.
Patch 5 adds binary and pad support to structs in netlink-raw.
Patches 6-8 contain specs that use the sub-message attribute type.
Patches 9-13 update ynl-gen-rst and its make target
====================

Link: https://lore.kernel.org/r/20231215093720.18774-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>