Policing filters do not use the TCA_ACT_* enum and the tb[]
nlattr array in tcf_action_init_1() doesn't get filled for
them so we should not try to look for a TCA_ACT_COOKIE
attribute in the then uninitialized array.
The error handling in cookie allocation then calls
tcf_hash_release() leading to invalid memory access later
on.
Additionally, if cookie allocation fails after an already
existing non-policing filter has successfully been changed,
tcf_action_release() should not be called, also we would
have to roll back the changes in the error handling, so
instead we now allocate the cookie early and assign it on
success at the end.

CVE-2017-7979
Fixes: 1045ba77 ("net sched actions: Add support for user cookies")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed: Dcbx bug fixes

The series has set of bug fixes for dcbx implementation of qed driver.
Please consider applying this to 'net' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Change ieee_setpfc() callback implementation to populate traffic class
count with the user provided value.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed_dcbnl_get_dcbx() API uses kmalloc in GFT_KERNEL mode. The API gets
invoked in the interrupt context by qed_dcbnl_getdcbx callback. Need
to invoke this kmalloc in atomic mode.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PFC error-mask value is not supported by MFW, but this bit could be
set in the pfc bit-map of the operational parameters if remote device
supports it. These operational parameters are used as basis for
populating the dcbx config parameters. User provided configs will be
applied on top of these parameters and then send them to MFW when
requested. Driver need to clear the error-mask bit before sending the
config parameters to MFW.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some adapters may not publish the max_tc value. Populate the default
value for max_tc field in case the mfw didn't provide one.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver was failing to check that the SKB wasn't cloned
before adding checksum data.
Replace existing handling to extend/copy the header buffer
with skb_cow_head.
Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mugunthan V N, who was reviewing TI's CPSW driver patches is
not working for TI anymore and wont be reviewing patches for
that driver.

Drop Mugunthan as the maintiainer for this driver.

Grygorii continues to be a reviewer. Dave Miller applies the
patches directly and adding a maintainer is actually
misleading since get_maintainer.pl script stops suggesting
that Dave Miller be copied.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2017-04-19

Two fixes for af_key:

1) Add a lock to key dump to prevent a NULL pointer dereference.
   From Yuejie Shi.

2) Fix slab-out-of-bounds in parse_ipsecrequests.
   From Herbert Xu.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is prompted by a static checker warning about a potential
use after free.  The concern is that netif_rx_ni() can free "skb" and we
call it twice.

When I look at the commit that added this, it looks like some stray
lines were added accidentally.  It doesn't make sense to me that we
would recieve the same data two times.  I asked the author but never
recieved a response.

I can't test this code, but I'm pretty sure my patch is correct.

Fixes: 4b063258 ("dp83640: Delay scheduled work.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes an out-of-bounds access in seg6_validate_srh() when the
trailing data is less than sizeof(struct sr6_tlv).
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

'psock_fanout' has been failing since commit 4d7b9dc1 ("tools:
psock_lib: harden socket filter used by psock tests").  That commit
changed the CBPF filter to examine the full ethernet frame, and was
tested on 'psock_tpacket' which uses SOCK_RAW.  But 'psock_fanout' was
also using this same CBPF in two places, for filtering and fanout, on a
SOCK_DGRAM socket.

Change 'psock_fanout' to use SOCK_RAW so that the CBPF program used with
SO_ATTACH_FILTER can examine the entire frame.  Create a new CBPF
program for use with PACKET_FANOUT_DATA which ignores the header, as it
cannot see the ethernet header.

Tested: Ran tools/testing/selftests/net/psock_{fanout,tpacket} 10 times,
and they all passed.

Fixes: 4d7b9dc1 ("tools: psock_lib: harden socket filter used by psock tests")
Signed-off-by: 'Mike Maloney <maloneykernel@gmail.com>'
Signed-off-by: David S. Miller <davem@davemloft.net>

AP/AP_VLAN modes don't accept any real 802.11 multicast data
frames, but since they do need to accept broadcast management
frames the same is currently permitted for data frames. This
opens a security problem because such frames would be decrypted
with the GTK, and could even contain unicast L3 frames.

Since the spec says that ToDS frames must always have the BSSID
as the RA (addr1), reject any other data frames.

The problem was originally reported in "Predicting, Decrypting,
and Abusing WPA2/802.11 Group Keys" at usenix
https://www.usenix.org/conference/usenixsecurity16/technical-sessions/presentation/vanhoef
and brought to my attention by Jouni.

Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
--
Dave, I didn't want to send you a new pull request for a single
commit yet again - can you apply this one patch as is?
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2017-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A single fix, for the MU-MIMO monitor mode, that fixes
bad SKB accesses if the SKB was paged, which is the case
for the only driver supporting this - iwlwifi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The DMA API debugging (when enabled) causes:

WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c
DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d

to be  printed after repeated initialization of the Ether device, e.g.
suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped
using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are
never unmapped. Resolve this problem by unmapping the buffers when freeing
the descriptor  rings;  in order  to do it right, we'd have to add an extra
parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(),
while at it).

Based on the commit a47b70ea ("ravb: unmap descriptors when freeing
rings").
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sparc fixes from David Miller:
 "Two Sparc bug fixes from Daniel Jordan and Nitin Gupta"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix hugepage page table free
  sparc64: Use LOCKDEP_SMALL, not PROVE_LOCKING_SMALL

Pull networking fixes from David Miller:

 1) BPF tail call handling bug fixes from Daniel Borkmann.

 2) Fix allowance of too many rx queues in sfc driver, from Bert
    Kenward.

 3) Non-loopback ipv6 packets claiming src of ::1 should be dropped,
    from Florian Westphal.

 4) Statistics requests on KSZ9031 can crash, fix from Grygorii
    Strashko.

 5) TX ring handling fixes in mediatek driver, from Sean Wang.

 6) ip_ra_control can deadlock, fix lock acquisition ordering to fix,
    from Cong WANG.

 7) Fix use after free in ip_recv_error(), from Willem de Buijn.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  bpf: fix checking xdp_adjust_head on tail calls
  bpf: fix cb access in socket filter programs on tail calls
  ipv6: drop non loopback packets claiming to originate from ::1
  net: ethernet: mediatek: fix inconsistency of port number carried in TXD
  net: ethernet: mediatek: fix inconsistency between TXD and the used buffer
  net: phy: micrel: fix crash when statistic requested for KSZ9031 phy
  net: vrf: Fix setting NLM_F_EXCL flag when adding l3mdev rule
  net: thunderx: Fix set_max_bgx_per_node for 81xx rgx
  net-timestamp: avoid use-after-free in ip_recv_error
  ipv4: fix a deadlock in ip_ra_control
  sfc: limit the number of receive queues

Make sure the start adderess is aligned to PMD_SIZE
boundary when freeing page table backing a hugepage
region. The issue was causing segfaults when a region
backed by 64K pages was unmapped since such a region
is in general not PMD_SIZE aligned.
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CONFIG_PROVE_LOCKING_SMALL shrinks the memory usage of lockdep so the
kernel text, data, and bss fit in the required 32MB limit, but this
option is not set for every config that enables lockdep.

A 4.10 kernel fails to boot with the console output

    Kernel: Using 8 locked TLB entries for main kernel image.
    hypervisor_tlb_lock[2000000:0:8000000071c007c3:1]: errors with f
    Program terminated

with these config options

    CONFIG_LOCKDEP=y
    CONFIG_LOCK_STAT=y
    CONFIG_PROVE_LOCKING=n

To fix, rename CONFIG_PROVE_LOCKING_SMALL to CONFIG_LOCKDEP_SMALL, and
enable this option with CONFIG_LOCKDEP=y so we get the reduced memory
usage every time lockdep is turned on.

Tested that CONFIG_LOCKDEP_SMALL is set to 'y' if and only if
CONFIG_LOCKDEP is set to 'y'.  When other lockdep-related config options
that select CONFIG_LOCKDEP are enabled (e.g. CONFIG_LOCK_STAT or
CONFIG_PROVE_LOCKING), verified that CONFIG_LOCKDEP_SMALL is also
enabled.

Fixes: e6b5f1be ("config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ftrace testcase update from Steven Rostedt:
 "While testing my development branch, without the fix for the pid use
  after free bug, the selftest that Namhyung added triggers it. I
  figured it would be good to add the test for the bug after the fix,
  such that it does not exist without the fix.

  I added another patch that lets the test only test part of the pid
  filtering, and ignores the function-fork (filtering on children as
  well) if the function-fork feature does not exist. This feature is
  added by Namhyung just before he added this test. But since the test
  tests both with and without the feature, it would be good to let it
  not fail if the feature does not exist"

* tag 'trace-v4.11-rc5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests: ftrace: Add check for function-fork before running pid filter test
  selftests: ftrace: Add a testcase for function PID filter

Have the func-filter-pid test check for the function-fork option before
testing it. It can still test the pid filtering, but will stop before
testing the function-fork option for children inheriting the pids.
This allows the test to be added before the function-fork feature, but after
a bug fix that triggers one of the bugs the test can cause.

Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull ftrace fix from Steven Rostedt:
 "Namhyung Kim discovered a use after free bug. It has to do with adding
  a pid filter to function tracing in an instance, and then freeing the
  instance"

* tag 'trace-v4.11-rc5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix function pid filter on instances

Pull crypto fixes from Herbert Xu:
 "This fixes the following problems:

   - regression in new XTS/LRW code when used with async crypto

   - long-standing bug in ahash API when used with certain algos

   - bogus memory dereference in async algif_aead with certain algos"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - Fix bogus request dereference in completion function
  crypto: ahash - Fix EINPROGRESS notification callback
  crypto: lrw - Fix use-after-free on EINPROGRESS
  crypto: xts - Fix use-after-free on EINPROGRESS

Like event pid filtering test, add function pid filtering test with the
new "function-fork" option.  It also tests it on an instance directory
so that it can verify the bug related pid filtering on instances.

Link: http://lkml.kernel.org/r/20170417024430.21194-5-namhyung@kernel.org

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The parsing of sadb_x_ipsecrequest is broken in a number of ways.
First of all we're not verifying sadb_x_ipsecrequest_len.  This
is needed when the structure carries addresses at the end.  Worse
we don't even look at the length when we parse those optional
addresses.

The migration code had similar parsing code that's better but
it also has some deficiencies.  The length is overcounted first
of all as it includes the header itself.  It also fails to check
the length before dereferencing the sa_family field.

This patch fixes those problems in parse_sockaddr_pair and then
uses it in parse_ipsecrequest.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Pull parisc fix from Helge Deller:
 "One patch which fixes get_user() for 64-bit values on 32-bit kernels.

  Up to now we lost the upper 32-bits of the returned 64-bit value"

* 'parisc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix get_user() for 64-bit value on 32-bit kernel

When function tracer has a pid filter, it adds a probe to sched_switch
to track if current task can be ignored.  The probe checks the
ftrace_ignore_pid from current tr to filter tasks.  But it misses to
delete the probe when removing an instance so that it can cause a crash
due to the invalid tr pointer (use-after-free).

This is easily reproducible with the following:

  # cd /sys/kernel/debug/tracing
  # mkdir instances/buggy
  # echo $$ > instances/buggy/set_ftrace_pid
  # rmdir instances/buggy

  ============================================================================
  BUG: KASAN: use-after-free in ftrace_filter_pid_sched_switch_probe+0x3d/0x90
  Read of size 8 by task kworker/0:1/17
  CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G    B           4.11.0-rc3  #198
  Call Trace:
   dump_stack+0x68/0x9f
   kasan_object_err+0x21/0x70
   kasan_report.part.1+0x22b/0x500
   ? ftrace_filter_pid_sched_switch_probe+0x3d/0x90
   kasan_report+0x25/0x30
   __asan_load8+0x5e/0x70
   ftrace_filter_pid_sched_switch_probe+0x3d/0x90
   ? fpid_start+0x130/0x130
   __schedule+0x571/0xce0
   ...

To fix it, use ftrace_clear_pids() to unregister the probe.  As
instance_rmdir() already updated ftrace codes, it can just free the
filter safely.

Link: http://lkml.kernel.org/r/20170417024430.21194-2-namhyung@kernel.org

Fixes: 0c8916c3 ("tracing: Add rmdir to remove multibuffer instances")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Daniel Borkmann says:

====================
Two BPF fixes

The set fixes cb_access and xdp_adjust_head bits in struct bpf_prog,
that are used for requirement checks on the program rather than f.e.
heuristics. Thus, for tail calls, we cannot make any assumptions and
are forced to set them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 17bedab2 ("bpf: xdp: Allow head adjustment in XDP prog")
added the xdp_adjust_head bit to the BPF prog in order to tell drivers
that the program that is to be attached requires support for the XDP
bpf_xdp_adjust_head() helper such that drivers not supporting this
helper can reject the program. There are also drivers that do support
the helper, but need to check for xdp_adjust_head bit in order to move
packet metadata prepended by the firmware away for making headroom.

For these cases, the current check for xdp_adjust_head bit is insufficient
since there can be cases where the program itself does not use the
bpf_xdp_adjust_head() helper, but tail calls into another program that
uses bpf_xdp_adjust_head(). As such, the xdp_adjust_head bit is still
set to 0. Since the first program has no control over which program it
calls into, we need to assume that bpf_xdp_adjust_head() helper is used
upon tail calls. Thus, for the very same reasons in cb_access, set the
xdp_adjust_head bit to 1 when the main program uses tail calls.

Fixes: 17bedab2 ("bpf: xdp: Allow head adjustment in XDP prog")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ff936a04 ("bpf: fix cb access in socket filter programs")
added a fix for socket filter programs such that in i) AF_PACKET the
20 bytes of skb->cb[] area gets zeroed before use in order to not leak
data, and ii) socket filter programs attached to TCP/UDP sockets need
to save/restore these 20 bytes since they are also used by protocol
layers at that time.

The problem is that bpf_prog_run_save_cb() and bpf_prog_run_clear_cb()
only look at the actual attached program to determine whether to zero
or save/restore the skb->cb[] parts. There can be cases where the
actual attached program does not access the skb->cb[], but the program
tail calls into another program which does access this area. In such
a case, the zero or save/restore is currently not performed.

Since the programs we tail call into are unknown at verification time
and can dynamically change, we need to assume that whenever the attached
program performs a tail call, that later programs could access the
skb->cb[], and therefore we need to always set cb_access to 1.

Fixes: ff936a04 ("bpf: fix cb access in socket filter programs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We lack a saddr check for ::1. This causes security issues e.g. with acls
permitting connections from ::1 because of assumption that these originate
from local machine.

Assuming a source address of ::1 is local seems reasonable.
RFC4291 doesn't allow such a source address either, so drop such packets.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sean Wang says:

====================
mediatek: Fix crash caused by reporting inconsistent skb->len to BQL

Changes since v1:
- fix inconsistent enumeration which easily causes the potential bug

The series fixes kernel BUG caused by inconsistent SKB length reported
into BQL. The reason for inconsistent length comes from hardware BUG which
results in different port number carried on the TXD within the lifecycle of
SKB. So patch 2) is proposed for use a software way to track which port
the SKB involving instead of hardware way. And patch 1) is given for another
issue I found which causes TXD and SKB inconsistency that is not expected
in the initial logic, so it is also being corrected it in the series.

The log for the kernel BUG caused by the issue is posted as below.

[  120.825955] kernel BUG at ... lib/dynamic_queue_limits.c:26!
[  120.837684] Internal error: Oops - BUG: 0 [#1] SMP ARM
[  120.842778] Modules linked in:
[  120.845811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-191576-gdbcef47 #35
[  120.853488] Hardware name: Mediatek Cortex-A7 (Device Tree)
[  120.859012] task: c1007480 task.stack: c1000000
[  120.863510] PC is at dql_completed+0x108/0x17c
[  120.867915] LR is at 0x46
[  120.870512] pc : [<c03c19c8>]    lr : [<00000046>]    psr: 80000113
[  120.870512] sp : c1001d58  ip : c1001d80  fp : c1001d7c
[  120.881895] r10: 0000003e  r9 : df6b3400  r8 : 0ed86506
[  120.887075] r7 : 00000001  r6 : 00000001  r5 : 0ed8654c  r4 : df0135d8
[  120.893546] r3 : 00000001  r2 : df016800  r1 : 0000fece  r0 : df6b3480
[  120.900018] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  120.907093] Control: 10c5387d  Table: 9e27806a  DAC: 00000051
[  120.912789] Process swapper/0 (pid: 0, stack limit = 0xc1000218)
[  120.918744] Stack: (0xc1001d58 to 0xc1002000)

....

121.085331] 1fc0: 00000000 c0a52a28 00000000 c10855d4 c1003c58 c0a52a24 c100885c 8000406a
[  121.093444] 1fe0: 410fc073 00000000 00000000 c1001ff8 8000807c c0a009cc 00000000 00000000
[  121.101575] [<c03c19c8>] (dql_completed) from [<c04cb010>] (mtk_napi_tx+0x1d0/0x37c)
[  121.109263] [<c04cb010>] (mtk_napi_tx) from [<c05e28cc>] (net_rx_action+0x24c/0x3b8)
[  121.116951] [<c05e28cc>] (net_rx_action) from [<c010152c>] (__do_softirq+0xe4/0x35c)
[  121.124638] [<c010152c>] (__do_softirq) from [<c012a624>] (irq_exit+0xe8/0x150)
[  121.131895] [<c012a624>] (irq_exit) from [<c017750c>] (__handle_domain_irq+0x70/0xc4)
[  121.139666] [<c017750c>] (__handle_domain_irq) from [<c0101404>] (gic_handle_irq+0x58/0x9c)
[  121.147953] [<c0101404>] (gic_handle_irq) from [<c010e18c>] (__irq_svc+0x6c/0x90)
[  121.155373] Exception stack(0xc1001ef8 to 0xc1001f40)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix port inconsistency on TXD due to hardware BUG that would cause
different port number is carried on the same TXD between tx_map()
and tx_unmap() with the iperf test. It would cause confusing BQL
logic which leads to kernel panic when dual GMAC runs concurrently.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix inconsistency between the TXD descriptor and the used buffer that
would cause unexpected logic at mtk_tx_unmap() during skb housekeeping.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now the command:
	ethtool --phy-statistics eth0
will cause system crash with meassage "Unable to handle kernel NULL pointer
dereference at virtual address 00000010" from:

 (kszphy_get_stats) from [<c069f1d8>] (ethtool_get_phy_stats+0xd8/0x210)
 (ethtool_get_phy_stats) from [<c06a0738>] (dev_ethtool+0x5b8/0x228c)
 (dev_ethtool) from [<c06b5484>] (dev_ioctl+0x3fc/0x964)
 (dev_ioctl) from [<c0679f7c>] (sock_ioctl+0x170/0x2c0)
 (sock_ioctl) from [<c02419d4>] (do_vfs_ioctl+0xa8/0x95c)
 (do_vfs_ioctl) from [<c02422c4>] (SyS_ioctl+0x3c/0x64)
 (SyS_ioctl) from [<c0107d60>] (ret_fast_syscall+0x0/0x44)

The reason: phy_driver structure for KSZ9031 phy has no .probe() callback
defined. As result, struct phy_device *phydev->priv pointer will not be
initializes (null).
This issue will affect also following phys:
 KSZ8795, KSZ886X, KSZ8873MLL, KSZ9031, KSZ9021, KSZ8061, KS8737

Fix it by:
- adding .probe() = kszphy_probe() callback to KSZ9031, KSZ9021
phys. The kszphy_probe() can be re-used as it doesn't do any phy specific
settings.
- removing statistic callbacks from other phys (KSZ8795, KSZ886X,
KSZ8873MLL, KSZ8061, KS8737) as they doesn't have corresponding
statistic counters.

Fixes: 2b2427d0 ("phy: micrel: Add ethtool statistics counters")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only need 1 l3mdev FIB rule. Fix setting NLM_F_EXCL in the nlmsghdr.

Fixes: 1aa6c4f6 ("net: vrf: Add l3mdev rules on first device create")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the PCI_SUBSYS_DEVID_81XX_RGX and use the same to set
the max bgx per node count.

This fixes the issue intoduced by following commit
78aacb6f net: thunderx: Fix invalid mac addresses for node1 interfaces
With this commit the max_bgx_per_node for 81xx is set as 2 instead of 3
because of which num_vfs is always calculated as zero.
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzkaller reported a use-after-free in ip_recv_error at line

    info->ipi_ifindex = skb->dev->ifindex;

This function is called on dequeue from the error queue, at which
point the device pointer may no longer be valid.

Save ifindex on enqueue in __skb_complete_tx_timestamp, when the
pointer is valid or NULL. Store it in temporary storage skb->cb.

It is safe to reference skb->dev here, as called from device drivers
or dev_queue_xmit. The exception is when called from tcp_ack_tstamp;
in that case it is NULL and ifindex is set to 0 (invalid).

Do not return a pktinfo cmsg if ifindex is 0. This maintains the
current behavior of not returning a cmsg if skb->dev was NULL.

On dequeue, the ipv4 path will cast from sock_exterr_skb to
in_pktinfo. Both have ifindex as their first element, so no explicit
conversion is needed. This is by design, introduced in commit
0b922b7a ("net: original ingress device index in PKTINFO"). For
ipv6 ip6_datagram_support_cmsg converts to in6_pktinfo.

Fixes: 829ae9d6 ("net-timestamp: allow reading recv cmsg on errqueue with origin tstamp")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to commit 87e9f031
("ipv4: fix a potential deadlock in mcast getsockopt() path"),
there is a deadlock scenario for IP_ROUTER_ALERT too:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock(sk_lock-AF_INET);
                               lock(rtnl_mutex);
  lock(sk_lock-AF_INET);

Fix this by always locking RTNL first on all setsockopt() paths.

Note, after this patch ip_ra_lock is no longer needed either.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The number of rx queues is determined by the rss_cpus parameter
or the cpu topology. If that is higher than EFX_MAX_RX_QUEUES the
driver can corrupt state.

Fixes: 8ceee660 ("New driver "sfc" for Solarstorm SFC4000 controller.")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>