- 30 Nov, 2022 1 commit
-
-
Ricardo Ribalda authored
If we do not shutdown the peripheral properly at shutdown, the whole system crashes after kexec() on the first io access. Let's implement the appropriate callback. Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221127-mtk-snd-v1-0-b7886faa612b@chromium.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 29 Nov, 2022 19 commits
-
-
Mark Brown authored
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: Leftover from recent series [1]. Following changes are proposed for the rt5682 sound card driver: 1) Move jack unassignment from platform_device->remove() to dai_link->exit(). This is done to make jack init and deinit flows symmetric 2) Remove platform_device->remove() function 3) Simplify card->suspend_pre() and card->resume_post() by making use of snd_soc_card_get_codec_dai() helper
-
Amadeusz Sławiński authored
Use link->exit() rather than pdev->remove() to unassign jack during card unbind procedure so codec link initialization and exit procedures are symmetrical. Also, there is no need to perform search for codec dai in suspend_pre() and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20221129180738.2866290-3-cezary.rojewski@intel.comSigned-off-by:
-
Amadeusz Sławiński authored
Following commits will make use of it to find codec DAI, define it first. Signed-off-by:
-
Zhang Qilong authored
The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. We fix it by going to err_pm instead of err_clk. Fixes:f086ba9d ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20220928160402.126140-1-zhangqilong3@huawei.comSigned-off-by:
-
Mark Brown authored
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: For all the boards included in this patchset, a similar set of changes is proposed: 1) Move jack unassignment from platform_device->remove() to dai_link->exit(). This is done to make jack init and deinit flows symmetric 2) Remove platform_device->remove() function 3) Simplify card->suspend_pre() and card->resume_post() by making use of snd_soc_card_get_codec_dai() helper While bdw_rt286 board - which is utilized by the catpt-driver - is definitely not part of "avs", same treatment applies. And thus decided to make it part of this series instead of sending it separately.
-
Srinivasa Rao Mandadapu authored
Add __maybe_unused tag for system PM ops suspend and resume. This is required to fix allmodconfig compilation issue. Fixes: a3a96e93 ("ASoC: qcom: lpass-sc7280: Add system suspend/resume PM ops") Signed-off-by:
Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Link: https://lore.kernel.org/r/1669726428-3140-1-git-send-email-quic_srivasam@quicinc.comSigned-off-by:
-
V sujith kumar Reddy authored
Add support for configuring sp and hs DAI from topology. Signed-off-by:
V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com> Link: https://lore.kernel.org/r/20221129100102.826781-1-vsujithkumar.reddy@amd.corp-partner.google.comSigned-off-by:
-
Mark Brown authored
Merge the fixes branch up so we can apply further AMD work.
-
Amadeusz Sławiński authored
Use link->exit() rather than pdev->remove() to unassign jack during card unbind procedure so codec link initialization and exit procedures are symmetrical. Also, there is no need to perform search for codec dai in suspend_pre() and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead. Signed-off-by:
-
Amadeusz Sławiński authored
Following commits will make use of it to find codec DAI, define it first. Signed-off-by:
-
Amadeusz Sławiński authored
Use link->exit() rather than pdev->remove() to unassign jack during card unbind procedure so codec link initialization and exit procedures are symmetrical. Also, there is no need to perform search for codec dai in suspend_pre() and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead. Signed-off-by:
-
Amadeusz Sławiński authored
Following commits will make use of it to find codec DAI, define it first. Signed-off-by:
-
Amadeusz Sławiński authored
Use link->exit() rather than pdev->remove() to unassign jack during card unbind procedure so codec link initialization and exit procedures are symmetrical. Also, there is no need to perform search for codec dai in suspend_pre() and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead. Signed-off-by:
-
Amadeusz Sławiński authored
There is existing define for codec DAI name, make use of it when setting codec DAI name. Signed-off-by:
-
Amadeusz Sławiński authored
Use link->exit() rather than pdev->remove() to unassign jack during card unbind procedure so codec link initialization and exit procedures are symmetrical. Also, there is no need to perform search for codec dai in suspend_pre() and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead. Signed-off-by:
-
Amadeusz Sławiński authored
Use link->exit() rather than pdev->remove() to unassign jack during card unbind procedure so codec link initialization and exit procedures are symmetrical. Also, there is no need to perform search for codec dai in suspend_pre() and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead. Signed-off-by:
-
Cezary Rojewski authored
Use link->exit() rather than pdev->remove() to unassign jack during card unbind procedure so codec link initialization and exit procedures are symmetrical. Also, there is no need to perform search for codec dai in suspend_pre() and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead. Signed-off-by:
-
Matthias Kaehlcke authored
sc7180_lpass_dev_resume() logs an error if clk_bulk_prepare_enable() fails. The clock framework already generates error logs if anything goes wrong, so the logging in _resume() is redundant, drop it. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20221129001633.v2.1.I8d1993f41f0da1eac0ecba321678ac489f9c0b9b@changeidSigned-off-by:
-
Srinivasa Rao Mandadapu authored
Update lpass sc7280 platform driver with PM ops, such as system supend and resume callbacks. This update is required to disable clocks during supend and avoid XO shutdown issue. Signed-off-by:
Rahul Ajmeriya <quic_rajmeriy@quicinc.com> Link: https://lore.kernel.org/r/1669703784-27589-1-git-send-email-quic_srivasam@quicinc.comSigned-off-by:
-
- 28 Nov, 2022 20 commits
-
-
Ricardo Ribalda authored
If the device does not come straight from reset, we might receive an IRQ before we are ready to handle it. Fixes: [ 2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4 [ 2.522601] Call trace: [ 2.525040] regmap_read+0x1c/0x80 [ 2.528434] mt8173_afe_irq_handler+0x40/0xf0 ... [ 2.598921] start_kernel+0x338/0x42c Signed-off-by:
-
Mark Brown authored
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>: Adding sound support for Qualcomm SM8450 SoC (and later for SC8280XP) brought some changes to APR/GPR services bindings. These bindings are part of qcom,apr.yaml: apr-or-gpr-device-node <- qcom,apr.yaml apr-gpr-service@[0-9] <- qcom,apr.yaml service-specific-components <- /schemas/sound/qcom,q6*.yaml The schema for services (apr-gpr-service@[0-9]) was not complete and is still quite not specific. It allows several incorrect combinations, like adding a clock-controller to a APM device. Restricting it would complicate the schema even more. Bringing new support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as well. Refactor the bindings before extending them for Qualcomm SM8450 SoC. -
Srinivasa Rao Mandadapu authored
Update lpass sc7180 platform driver with PM ops, such as system supend and resume callbacks. This update is required to disable clocks during supend and avoid XO shutdown issue. Signed-off-by:
-
Oder Chiou authored
We found an corner case in RT5640 codec driver which schedules jack work after system suspend as IRQ was enabled. Due to this, hitting the error as register access happening after suspend as jack worker thread getting scheduled in irq handler. The patch disables the irq during the suspend to prevent the corner case happening. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Reported-by:
Mohan Kumar D <mkumard@nvidia.com> Link: https://lore.kernel.org/r/20221128070825.91215-1-oder_chiou@realtek.comSigned-off-by:
-
Jean Delvare authored
Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20221127193549.211bf8f7@endymion.delvareSigned-off-by:
-
Pavel Dobias authored
For 8kHz and 16kHz sample rates and certain PCLK values the codec can be programmed to operate in exact integer mode. If available, use it to achieve the exact sample rate. Signed-off-by:
Pavel Dobias <dobias@2n.com> Link: https://lore.kernel.org/r/20221123153818.24650-1-dobias@2n.comSigned-off-by:
-
Kuninori Morimoto authored
Current rsnd_adg_clk_dbg_info() is using locak clk_name[] to ndicating clk name, but we don't want to use local clk_name[] everywhere when we support R-Car Gen4 sound to handling non compatible clk naming. This patch uses __clk_get_name() instead of local clk_name[] for it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v8mz8wcs.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Charles Keepax authored
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221123165432.594972-9-ckeepax@opensource.cirrus.comSigned-off-by:
-
Charles Keepax authored
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by:
-
Charles Keepax authored
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by:
-
Charles Keepax authored
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by:
-
Charles Keepax authored
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by:
-
Charles Keepax authored
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by:
-
Charles Keepax authored
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by:
-
Charles Keepax authored
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by:
-
Charles Keepax authored
The vast majority of the current users of the SoundWire framework have almost identical code for converting from hw_params to SoundWire configuration. Whilst complex devices might require more, it is very likely that most new devices will follow the same pattern. Save a little code by factoring this out into a helper function. Signed-off-by:
-
Jean Delvare authored
Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. Signed-off-by:
-
V sujith kumar Reddy authored
ADD HS and SP virtual DAI driver to support AMD platforms. Signed-off-by:
-
V sujith kumar Reddy authored
By default clock source is selected as internal clock of 96Mhz which is not configurable. Now we select the clock source to external clock (ACLK) which can be configurable to different clock ranges depending on usecase. Signed-off-by:
-
V sujith kumar Reddy authored
By default the position updates are read from dsp box when streambox size is not defined.if the streambox size is defined to some value then position updates can be read from the streambox. Signed-off-by:
-
