Skip to content

L
linux
Switch branch/tag
  1. 07 Oct, 2015 25 commits
  3. 06 Oct, 2015 4 commits
  5. 05 Oct, 2015 11 commits
    • Andrzej Hajda's avatar
      mac80211: make ieee80211_new_mesh_header return unsigned · 5edfcee5
      Andrzej Hajda authored 
      The function returns always non-negative values.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      5edfcee5
    • Daniel Borkmann's avatar
      ebpf: include perf_event only where really needed · 0cdf5640
      Daniel Borkmann authored 
      Commit ea317b26 ("bpf: Add new bpf map type to store the pointer
to struct perf_event") added perf_event.h to the main eBPF header, so
it gets included for all users. perf_event.h is actually only needed
from array map side, so lets sanitize this a bit.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0cdf5640
    • Nicolas Schichan's avatar
      ARM: net: support BPF_ALU | BPF_MOD instructions in the BPF JIT. · 4560cdff
      Nicolas Schichan authored 
      For ARMv7 with UDIV instruction support, generate an UDIV instruction
followed by an MLS instruction.

For other ARM variants, generate code calling a C wrapper similar to
the jit_udiv() function used for BPF_ALU | BPF_DIV instructions.

Some performance numbers reported by the test_bpf module (the duration
per filter run is reported in nanoseconds, between "jitted:<x>" and
"PASS":

ARMv7 QEMU nojit:	test_bpf: #3 DIV_MOD_KX jited:0 2196 PASS
ARMv7 QEMU jit:		test_bpf: #3 DIV_MOD_KX jited:1 104 PASS
ARMv5 QEMU nojit:	test_bpf: #3 DIV_MOD_KX jited:0 2176 PASS
ARMv5 QEMU jit:		test_bpf: #3 DIV_MOD_KX jited:1 1104 PASS
ARMv5 kirkwood nojit:	test_bpf: #3 DIV_MOD_KX jited:0 1103 PASS
ARMv5 kirkwood jit:	test_bpf: #3 DIV_MOD_KX jited:1 311 PASS
Signed-off-by: default avatarNicolas Schichan <nschichan@freebox.fr>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4560cdff
    • David S. Miller's avatar
      Merge branch 'asix-rx-mem-handling' · df7b6015
      David S. Miller authored 
      Mark Craske says:

====================
Improve ASIX RX memory allocation error handling

The ASIX RX handler algorithm is weak on error handling.
There is a design flaw in the ASIX RX handler algorithm because the
implementation for handling RX Ethernet frames for the DUB-E100 C1 can
have Ethernet frames spanning multiple URBs. This means that payload data
from more than 1 URB is sometimes needed to fill the socket buffer with a
complete Ethernet frame. When the URB with the start of an Ethernet frame
is received then an attempt is made to allocate a socket buffer. If the
memory allocation fails then the algorithm sets the buffer pointer member
to NULL and the function exits (no crash yet). Subsequently, the RX hander
is called again to process the next URB which assumes there is a socket
buffer available and the kernel crashes when there is no buffer.

This patchset implements an improvement to the RX handling algorithm to
avoid a crash when no memory is available for the socket buffer.

The patchset will apply cleanly to the net-next master branch but the
created kernel has not been tested. The driver was tested on ARM kernels
v3.8 and v3.14 for a commercial product.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      df7b6015
    • Dean Jenkins's avatar
      asix: Continue processing URB if no RX netdev buffer · 6a570814
      Dean Jenkins authored 
      Avoid a loss of synchronisation of the Ethernet Data header 32-bit
word due to a failure to get a netdev socket buffer.

The ASIX RX handling algorithm returned 0 upon a failure to get
an allocation of a netdev socket buffer. This causes the URB
processing to stop which potentially causes a loss of synchronisation
with the Ethernet Data header 32-bit word. Therefore, subsequent
processing of URBs may be rejected due to a loss of synchronisation.
This may cause additional good Ethernet frames to be discarded
along with outputting of synchronisation error messages.

Implement a solution which checks whether a netdev socket buffer
has been allocated before trying to copy the Ethernet frame into
the netdev socket buffer. But continue to process the URB so that
synchronisation is maintained. Therefore, only a single Ethernet
frame is discarded when no netdev socket buffer is available.
Signed-off-by: default avatarDean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: default avatarMark Craske <Mark_Craske@mentor.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6a570814
    • Dean Jenkins's avatar
      asix: On RX avoid creating bad Ethernet frames · 3f30b158
      Dean Jenkins authored 
      When RX Ethernet frames span multiple URB socket buffers,
the data stream may suffer a discontinuity which will cause
the current Ethernet frame in the netdev socket buffer
to be incomplete. This frame needs to be discarded instead
of appending unrelated data from the current URB socket buffer
to the Ethernet frame in the netdev socket buffer. This avoids
creating a corrupted Ethernet frame in the netdev socket buffer.

A discontinuity can occur when the previous URB socket buffer
held an incomplete Ethernet frame due to truncation or a
URB socket buffer containing the end of the Ethernet frame
was missing.

Therefore, add a sanity test for when an Ethernet frame
spans multiple URB socket buffers to check that the remaining
bytes of the currently received Ethernet frame point to
a good Data header 32-bit word of the next Ethernet
frame. Upon error, reset the remaining bytes variable to
zero and discard the current netdev socket buffer.
Assume that the Data header is located at the start of
the current socket buffer and attempt to process the next
Ethernet frame from there. This avoids unnecessarily
discarding a good URB socket buffer that contains a new
Ethernet frame.
Signed-off-by: default avatarDean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: default avatarMark Craske <Mark_Craske@mentor.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3f30b158
    • Dean Jenkins's avatar
      asix: Simplify asix_rx_fixup_internal() netdev alloc · 9a5ccd8e
      Dean Jenkins authored 
      The code is checking that the Ethernet frame will fit into a
netdev allocated socket buffer within the constraints of MTU size,
Ethernet header length plus VLAN header length.

The original code was checking rx->remaining each loop of the while
loop that processes multiple Ethernet frames per URB and/or Ethernet
frames that span across URBs. rx->remaining decreases per while loop
so there is no point in potentially checking multiple times that the
Ethernet frame (remaining part) will fit into the netdev socket buffer.

The modification checks that the size of the Ethernet frame will fit
the netdev socket buffer before allocating the netdev socket buffer.
This avoids grabbing memory and then deciding that the Ethernet frame
is too big and then freeing the memory.
Signed-off-by: default avatarDean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: default avatarMark Craske <Mark_Craske@mentor.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9a5ccd8e
    • Dean Jenkins's avatar
      asix: Tidy-up 32-bit header word synchronisation · 3bfc69ab
      Dean Jenkins authored 
      Tidy-up the Data header 32-bit word synchronisation logic in
asix_rx_fixup_internal() by removing redundant logic tests.

The code is looking at the following cases of the Data header
32-bit word that is present before each Ethernet frame:

a) all 32 bits of the Data header word are in the URB socket buffer
b) first 16 bits of the Data header word are at the end of the URB
   socket buffer
c) last 16 bits of the Data header word are at the start of the URB
   socket buffer eg. split_head = true

Note that the lifetime of rx->split_head exists outside of the
function call and is accessed per processing of each URB. Therefore,
split_head being true acts on the next URB to be processed.

To check for b) the offset will be 16 bits (2 bytes) from the end of
the buffer then indicate split_head is true.
To check for c) split_head must be true because the first 16 bits
have been found.
To check for a) else c)

Note that the || logic of the old code included the state
(skb->len - offset == sizeof(u16) && rx->split_head) which is not
possible because the split_head cannot be true whilst checking for b).
This is because the split_head indicates that the first 16 bits have
been found and that is not possible whilst checking for the first 16
bits. Therefore simplify the logic.
Signed-off-by: default avatarDean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: default avatarMark Craske <Mark_Craske@mentor.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3bfc69ab
    • Dean Jenkins's avatar
      asix: Rename remaining and size for clarity · 7b0378f5
      Dean Jenkins authored 
      The Data header synchronisation is easier to understand
if the variables "remaining" and "size" are renamed.

Therefore, the lifetime of the "remaining" variable exists
outside of asix_rx_fixup_internal() and is used to indicate
any remaining pending bytes of the Ethernet frame that need
to be obtained from the next socket buffer. This allows an
Ethernet frame to span across multiple socket buffers.

"size" is now local to asix_rx_fixup_internal() and contains
the size read from the Data header 32-bit word.

Add "copy_length" to hold the number of the Ethernet frame
bytes (maybe a part of a full frame) that are to be copied
out of the socket buffer.
Signed-off-by: default avatarDean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: default avatarMark Craske <Mark_Craske@mentor.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7b0378f5
    • Daniel Borkmann's avatar
      bpf, seccomp: prepare for upcoming criu support · bab18991
      Daniel Borkmann authored 
      The current ongoing effort to dump existing cBPF seccomp filters back
to user space requires to hold the pre-transformed instructions like
we do in case of socket filters from sk_attach_filter() side, so they
can be reloaded in original form at a later point in time by utilities
such as criu.

To prepare for this, simply extend the bpf_prog_create_from_user()
API to hold a flag that tells whether we should store the original
or not. Also, fanout filters could make use of that in future for
things like diag. While fanout filters already use bpf_prog_destroy(),
move seccomp over to them as well to handle original programs when
present.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Cc: Tycho Andersen <tycho.andersen@canonical.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: default avatarTycho Andersen <tycho.andersen@canonical.com>
Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bab18991
    • WANG Cong's avatar
      vrf: fix a kernel warning · 0a15afd2
      WANG Cong authored 
      This fixes:

 tried to remove device ip6gre0 from (null)
 ------------[ cut here ]------------
 kernel BUG at net/core/dev.c:5219!
 invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
 CPU: 3 PID: 161 Comm: kworker/u8:2 Not tainted 4.3.0-rc2+ #1142
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 Workqueue: netns cleanup_net
 task: ffff8800d784a9c0 ti: ffff8800d74a4000 task.ti: ffff8800d74a4000
 RIP: 0010:[<ffffffff817f0797>]  [<ffffffff817f0797>] __netdev_adjacent_dev_remove+0x40/0xec
 RSP: 0018:ffff8800d74a7a98  EFLAGS: 00010282
 RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000000
 RDX: ffff88011adcf701 RSI: ffff88011adccbf8 RDI: ffff88011adccbf8
 RBP: ffff8800d74a7ab8 R08: 0000000000000001 R09: 0000000000000000
 R10: ffffffff81d190ff R11: 00000000ffffffff R12: ffff8800d599e7c0
 R13: 0000000000000000 R14: ffff8800d599e890 R15: ffffffff82385e00
 FS:  0000000000000000(0000) GS:ffff88011ac00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 00007ffd6f003000 CR3: 000000000220c000 CR4: 00000000000006e0
 Stack:
  0000000000000000 ffff8800d599e7c0 0000000000000b00 ffff8800d599e8a0
  ffff8800d74a7ad8 ffffffff817f0861 0000000000000000 ffff8800d599e7c0
  ffff8800d74a7af8 ffffffff817f088f 0000000000000000 ffff8800d599e7c0
 Call Trace:
  [<ffffffff817f0861>] __netdev_adjacent_dev_unlink+0x1e/0x35
  [<ffffffff817f088f>] __netdev_adjacent_dev_unlink_neighbour+0x17/0x41
  [<ffffffff817f56e6>] netdev_upper_dev_unlink+0x6c/0x13d
  [<ffffffff81674a3d>] vrf_del_slave+0x26/0x7d
  [<ffffffff81674ac3>] vrf_device_event+0x2f/0x34
  [<ffffffff81098c40>] notifier_call_chain+0x75/0x9c
  [<ffffffff81098fa2>] raw_notifier_call_chain+0x14/0x16
  [<ffffffff817ee129>] call_netdevice_notifiers_info+0x52/0x59
  [<ffffffff817f179d>] call_netdevice_notifiers+0x13/0x15
  [<ffffffff817f6f18>] rollback_registered_many+0x14f/0x24f
  [<ffffffff817f70f2>] unregister_netdevice_many+0x19/0x64
  [<ffffffff819a2455>] ip6gre_exit_net+0x163/0x177
  [<ffffffff817eb019>] ops_exit_list+0x44/0x55
  [<ffffffff817ebcb7>] cleanup_net+0x193/0x226
  [<ffffffff81091e1c>] process_one_work+0x26c/0x4d8
  [<ffffffff81091d20>] ? process_one_work+0x170/0x4d8
  [<ffffffff81092296>] worker_thread+0x1df/0x2c2
  [<ffffffff810920b7>] ? process_scheduled_works+0x2f/0x2f
  [<ffffffff810920b7>] ? process_scheduled_works+0x2f/0x2f
  [<ffffffff81097a20>] kthread+0xd4/0xdc
  [<ffffffff810bc523>] ? trace_hardirqs_on_caller+0x17d/0x199
  [<ffffffff8109794c>] ? __kthread_parkme+0x83/0x83
  [<ffffffff81a5240f>] ret_from_fork+0x3f/0x70
  [<ffffffff8109794c>] ? __kthread_parkme+0x83/0x83

Fixes: 93a7e7e8 ("net: Remove the now unused vrf_ptr")
Cc: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
Acked-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0a15afd2
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7