In theory, dumpreset may fail and invalidate the preceeding log message.
Fix this and use the occasion to prepare for object reset locking, which
benefits from a few unrelated changes:

* Add an early call to nfnetlink_unicast if not resetting which
  effectively skips the audit logging but also unindents it.
* Extract the table's name from the netlink attribute (which is verified
  via earlier table lookup) to not rely upon validity of the looked up
  table pointer.
* Do not use local variable family, it will vanish.

Fixes: 8e6cf365 ("audit: log nftables configuration change events")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Trigger cloned skbs leaving softirq protection.
This triggers splat without the preceeding change
("netfilter: nf_queue: drop packets with cloned unconfirmed
 conntracks"):

WARNING: at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm..

because local delivery and forwarding will race for confirmation.

Based on a reproducer script from Yi Chen.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Conntrack assumes an unconfirmed entry (not yet committed to global hash
table) has a refcount of 1 and is not visible to other cores.

With multicast forwarding this assumption breaks down because such
skbs get cloned after being picked up, i.e.  ct->use refcount is > 1.

Likewise, bridge netfilter will clone broad/mutlicast frames and
all frames in case they need to be flood-forwarded during learning
phase.

For ip multicast forwarding or plain bridge flood-forward this will
"work" because packets don't leave softirq and are implicitly
serialized.

With nfqueue this no longer holds true, the packets get queued
and can be reinjected in arbitrary ways.

Disable this feature, I see no other solution.

After this patch, nfqueue cannot queue packets except the last
multicast/broadcast packet.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Fix missing initialisation of extack in flow offload.

Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add missing extack initialisation when ACKing BATCH_BEGIN and BATCH_END.

Fixes: bf2ac490 ("netfilter: nfnetlink: Handle ACK flags for batch messages")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Commit 264640fc ("ipv6: distinguish frag queues by device
for multicast and link-local packets") modified the ipv6 fragment
reassembly logic to distinguish frag queues by device for multicast
and link-local packets but in fact only the main reassembly code
limits the use of the device to those address types and the netfilter
reassembly code uses the device for all packets.

This means that if fragments of a packet arrive on different interfaces
then netfilter will fail to reassemble them and the fragments will be
expired without going any further through the filters.

Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch is based on the discussions between Neal Cardwell and
Eric Dumazet in the link
https://lore.kernel.org/netdev/20240726204105.1466841-1-quic_subashab@quicinc.com/

It was correctly pointed out that tp->window_clamp would not be
updated in cases where net.ipv4.tcp_moderate_rcvbuf=0 or if
(copied <= tp->rcvq_space.space). While it is expected for most
setups to leave the sysctl enabled, the latter condition may
not end up hitting depending on the TCP receive queue size and
the pattern of arriving data.

The updated check should be hit only on initial MSS update from
TCP_MIN_MSS to measured MSS value and subsequently if there was
an update to a larger value.

Fixes: 05f76b2d ("tcp: Adjust clamping window for applications specifying SO_RCVBUF")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ssn_offset field is u32 and is placed into the netlink response with
nla_put_u32(), but only 2 bytes are reserved for the attribute payload
in subflow_get_info_size() (even though it makes no difference
in the end, as it is aligned up to 4 bytes).  Supply the correct
argument to the relevant nla_total_size() call to make it less
confusing.

Fixes: 5147dfb5 ("mptcp: allow dumping subflow context to userspace")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240812065024.GA19719@asgard.redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A recent change to the driver exposed a bug where the MAC RX
filters (unicast MAC, broadcast MAC, and multicast MAC) are
configured and enabled before the RX path is fully initialized.
The result of this bug is that after the PHY is started packets
that match these MAC RX filters start to flow into the RX FIFO.
And then, after rx_init() is completed, these packets will go
into the driver RX ring as well. If enough packets are received
to fill the RX ring (default size is 128 packets) before the call
to request_irq() completes, the driver RX function becomes stuck.

This bug is intermittent but is most likely to be seen where the
oob_net0 interface is connected to a busy network with lots of
broadcast and multicast traffic.

All the MAC RX filters must be disabled until the RX path is ready,
i.e. all initialization is done and all the IRQs are installed.

Fixes: f7442a63 ("mlxbf_gige: call request_irq() after NAPI initialized")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240809163612.12852-1-davthompson@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

After napi_complete_done() is called when NAPI is polling in the current
process context, another NAPI may be scheduled and start running in
softirq on another CPU and may ring the doorbell before the current CPU
does. When combined with unnecessary rings when there is no need to arm
the CQ, it triggers error paths in the hardware.

This patch fixes this by calling napi_complete_done() after doorbell
rings. It limits the number of unnecessary rings when there is
no need to arm. MANA hardware specifies that there must be one doorbell
ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as
soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical
workloads, the 4 CQ wraparounds proves to be big enough that it rarely
exceeds this limit before all the napi weight is consumed.

To implement this, add a per-CQ counter cq->work_done_since_doorbell,
and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ.

Cc: stable@vger.kernel.org
Fixes: e1b5683f ("net: mana: Move NAPI from EQ to CQ")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In macb_suspend(), idev->ifa_list is fetched with rcu_access_pointer()
and later the pointer is dereferenced as ifa->ifa_local.

So, idev->ifa_list must be fetched with rcu_dereference().

Fixes: 0cb8de39 ("net: macb: Add ARP support to WOL")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240808040021.6971-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When there are multiple ap interfaces on one band and with WED on,
turning the interface down will cause a kernel panic on MT798X.

Previously, cb_priv was freed in mtk_wed_setup_tc_block() without
marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too.

Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL
in mtk_wed_setup_tc_block_cb().

----------
Unable to handle kernel paging request at virtual address 0072460bca32b4f5
Call trace:
 mtk_wed_setup_tc_block_cb+0x4/0x38
 0xffffffc0794084bc
 tcf_block_playback_offloads+0x70/0x1e8
 tcf_block_unbind+0x6c/0xc8
...
---------

Fixes: 79968444 ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Zheng Zhang <everything411@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to
create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment
is affected by the alloc_size passed into napi_build_skb(). The size needs
to be aligned properly for better performance and atomic operations.
Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic
operations may panic on the skb_shinfo(skb)->dataref due to alignment fault.

To fix this bug, add proper alignment to the alloc_size calculation.

Sample panic info:
[  253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce
[  253.300900] Mem abort info:
[  253.301760]   ESR = 0x0000000096000021
[  253.302825]   EC = 0x25: DABT (current EL), IL = 32 bits
[  253.304268]   SET = 0, FnV = 0
[  253.305172]   EA = 0, S1PTW = 0
[  253.306103]   FSC = 0x21: alignment fault
Call trace:
 __skb_clone+0xfc/0x198
 skb_clone+0x78/0xe0
 raw6_local_deliver+0xfc/0x228
 ip6_protocol_deliver_rcu+0x80/0x500
 ip6_input_finish+0x48/0x80
 ip6_input+0x48/0xc0
 ip6_sublist_rcv_finish+0x50/0x78
 ip6_sublist_rcv+0x1cc/0x2b8
 ipv6_list_rcv+0x100/0x150
 __netif_receive_skb_list_core+0x180/0x220
 netif_receive_skb_list_internal+0x198/0x2a8
 __napi_poll+0x138/0x250
 net_rx_action+0x148/0x330
 handle_softirqs+0x12c/0x3a0

Cc: stable@vger.kernel.org
Fixes: 80f6215b ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pawel Dembicki says:

====================
net: dsa: vsc73xx: fix MDIO bus access and PHY opera

This series are extracted patches from net-next series [0].

The VSC73xx driver has issues with PHY configuration. This patch series
fixes most of them.

The first patch synchronizes the register configuration routine with the
datasheet recommendations.

Patches 2-3 restore proper communication on the MDIO bus. Currently,
the write value isn't sent to the MDIO register, and without a busy check,
communication with the PHY can be interrupted. This causes the PHY to
receive improper configuration and autonegotiation could fail.

The fourth patch removes the PHY reset blockade, as it is no longer
required.

After fixing the MDIO operations, autonegotiation became possible.
The last patch removes the blockade, which became unnecessary after
the MDIO operations fix.

[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=874739&state=%2A&archive=both
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the vsc73xx mdio bus work properly, the generic autonegotiation
configuration works well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Resetting the VSC73xx PHY was problematic because the MDIO bus, without
a busy check, read and wrote incorrect register values.

My investigation indicates that resetting the PHY only triggers changes
in configuration. However, improper register values written earlier
were only exposed after a soft reset.

The reset itself wasn't the issue; rather, the problem stemmed from
incorrect read and write operations.

A 'soft_reset' can now proceed normally. There are no reasons to keep
the VSC73xx from being reset.

This commit removes the reset blockade in the 'vsc73xx_phy_write'
function.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The VSC73xx has a busy flag used during MDIO operations. It is raised
when MDIO read/write operations are in progress. Without it, PHYs are
misconfigured and bus operations do not work as expected.

Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the 'vsc73xx_phy_write' function, the register value is missing,
and the phy write operation always sends zeros.

This commit passes the value variable into the proper register.

Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the datasheet description ("Port Mode Procedure" in 5.6.2),
the VSC73XX_MAC_CFG_WEXC_DIS bit is configured only for half duplex mode.

The WEXC_DIS bit is responsible for MAC behavior after an excessive
collision. Let's set it as described in the datasheet.

Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In axiethernet header fix register defines comment description to be
inline with IP documentation. It updates MAC configuration register,
MDIO configuration register and frame filter control description.

Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can't dereference "skb" after calling vcc->push() because the skb
is released.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ueue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-08-07 (igc)

This series contains updates to igc driver only.

Faizal adjusts the size of the MAC internal buffer on i226 devices to
resolve an errata for leaking packet transmits. He also corrects a
condition in which qbv_config_change_errors are incorrectly counted.
Lastly, he adjusts the conditions for resetting the adapter when
changing TSN Tx mode and corrects the conditions in which gtxoffset
register is set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.

It also compresses two lines to a single line.
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx5 misc fixes 2024-08-08

This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================

Link: https://patch.msgid.link/20240808144107.2095424-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The queue stats API queries the queues according to the
real_num_[tr]x_queues, in case the device is down and channels were not
yet created, don't try to query their statistics.

To trigger the panic, run this command before the interface is brought
up:
./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml --dump qstats-get --json '{"ifindex": 4}'

BUG: kernel NULL pointer dereference, address: 0000000000000c00
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 977 Comm: python3 Not tainted 6.10.0+ #40
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core]
Code: fc 55 48 63 ee 53 48 89 d3 e8 40 3d 70 e1 85 c0 74 58 4c 89 ef e8 d4 07 04 00 84 c0 75 41 49 8b 84 24 f8 39 00 00 48 8b 04 e8 <48> 8b 90 00 0c 00 00 48 03 90 40 0a 00 00 48 89 53 08 48 8b 90 08
RSP: 0018:ffff888116be37d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888116be3868 RCX: 0000000000000004
RDX: ffff88810ada4000 RSI: 0000000000000000 RDI: ffff888109df09c0
RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000004
R10: ffff88813461901c R11: ffffffffffffffff R12: ffff888109df0000
R13: ffff888109df09c0 R14: ffff888116be38d0 R15: 0000000000000000
FS:  00007f4375d5c740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000c00 CR3: 0000000106ada006 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 ? __die+0x1f/0x60
 ? page_fault_oops+0x14e/0x3d0
 ? exc_page_fault+0x73/0x130
 ? asm_exc_page_fault+0x22/0x30
 ? mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core]
 netdev_nl_stats_by_netdev+0x2a6/0x4c0
 ? __rmqueue_pcplist+0x351/0x6f0
 netdev_nl_qstats_get_dumpit+0xc4/0x1b0
 genl_dumpit+0x2d/0x80
 netlink_dump+0x199/0x410
 __netlink_dump_start+0x1aa/0x2c0
 genl_family_rcv_msg_dumpit+0x94/0xf0
 ? __pfx_genl_start+0x10/0x10
 ? __pfx_genl_dumpit+0x10/0x10
 ? __pfx_genl_done+0x10/0x10
 genl_rcv_msg+0x116/0x2b0
 ? __pfx_netdev_nl_qstats_get_dumpit+0x10/0x10
 ? __pfx_genl_rcv_msg+0x10/0x10
 netlink_rcv_skb+0x54/0x100
 genl_rcv+0x24/0x40
 netlink_unicast+0x21a/0x340
 netlink_sendmsg+0x1f4/0x440
 __sys_sendto+0x1b6/0x1c0
 ? do_sock_setsockopt+0xc3/0x180
 ? __sys_setsockopt+0x60/0xb0
 __x64_sys_sendto+0x20/0x30
 do_syscall_64+0x50/0x110
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f43757132b0
Code: c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 1d 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 68 c3 0f 1f 80 00 00 00 00 41 54 48 83 ec 20
RSP: 002b:00007ffd258da048 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007ffd258da0f8 RCX: 00007f43757132b0
RDX: 000000000000001c RSI: 00007f437464b850 RDI: 0000000000000003
RBP: 00007f4375085de0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f43751a6147
 </TASK>
Modules linked in: netconsole xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse [last unloaded: netconsole]
CR2: 0000000000000c00
---[ end trace 0000000000000000 ]---
RIP: 0010:mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core]
Code: fc 55 48 63 ee 53 48 89 d3 e8 40 3d 70 e1 85 c0 74 58 4c 89 ef e8 d4 07 04 00 84 c0 75 41 49 8b 84 24 f8 39 00 00 48 8b 04 e8 <48> 8b 90 00 0c 00 00 48 03 90 40 0a 00 00 48 89 53 08 48 8b 90 08
RSP: 0018:ffff888116be37d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888116be3868 RCX: 0000000000000004
RDX: ffff88810ada4000 RSI: 0000000000000000 RDI: ffff888109df09c0
RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000004
R10: ffff88813461901c R11: ffffffffffffffff R12: ffff888109df0000
R13: ffff888109df09c0 R14: ffff888116be38d0 R15: 0000000000000000
FS:  00007f4375d5c740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000c00 CR3: 0000000106ada006 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 7b66ae53 ("net/mlx5e: Add per queue netdev-genl stats")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240808144107.2095424-6-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Previously, an ethtool rx flow with no attrs would not be added to the
NIC as it has no rules to configure the hw with, but it would be
reported as successful to the caller (return code 0). This is confusing
for the user as ethtool then reports "Added rule $num", but no rule was
actually added.

This change corrects that by instead reporting these wrong rules as
-EINVAL.

Fixes: b29c61da ("net/mlx5e: Ethtool steering flow validation refactoring")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808144107.2095424-5-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mlx5e_safe_reopen_channels() requires the state lock taken. The
referenced changed in the Fixes tag removed the lock to fix another
issue. This patch adds it back but at a later point (when calling
mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the
Fixes tag.

Fixes: eab0da38 ("net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_work")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/all/ZplpKq8FKi3vwfxv@gmail.com/T/Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808144107.2095424-4-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

During latency tests (netperf TCP_RR) a 30% degradation of HW GRO vs SW
GRO was observed. This is due to SHAMPO triggering timeout filler CQEs
instead of delivering the CQE for the packet.

Having a short timeout for SHAMPO doesn't bring any benefits as it is
the driver that does the merging, not the hardware. On the contrary, it
can have a negative impact: additional filler CQEs are generated due to
the timeout. As there is no way to disable this timeout, this change
sets it to the maximum value.

Instead of using the packet_merge.timeout parameter which is also used
for LRO, set the value directly when filling in the rest of the SHAMPO
parameters in mlx5e_build_rq_param().

Fixes: 99be5617 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808144107.2095424-3-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Unconditionally calling the MPIR query on BF separate mode yields the FW
syndrome below [1]. Do not call it unless admin clearly specified the SD
group, i.e. expressing the intention of using the multi-PF netdev
feature.

This fix covers cases not covered in
commit fca3b479 ("net/mlx5: Do not query MPIR on embedded CPU function").

[1]
mlx5_cmd_out_err:808:(pid 8267): ACCESS_REG(0x805) op_mod(0x1) failed,
status bad system state(0x4), syndrome (0x685f19), err(-5)

Fixes: 678eb448 ("net/mlx5: SD, Implement basic query and instantiation")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240808144107.2095424-2-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Sitnicki says:

====================
Don't take HW USO path when packets can't be checksummed by device

This series addresses a recent regression report from syzbot [1].

After enabling UDP_SEGMENT for egress devices which don't support checksum
offload [2], we need to tighten down the checks which let packets take the
HW USO path.

The fix consists of two parts:

1. don't let devices offer USO without checksum offload, and
2. force software USO fallback in presence of IPv6 extension headers.

[1] https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10154dbded6d6a2fecaebdfda206609de0f121a9

v3: https://lore.kernel.org/r/20240807-udp-gso-egress-from-tunnel-v3-0-8828d93c5b45@cloudflare.com
v2: https://lore.kernel.org/r/20240801-udp-gso-egress-from-tunnel-v2-0-9a2af2f15d8d@cloudflare.com
v1: https://lore.kernel.org/r/20240725-udp-gso-egress-from-tunnel-v1-0-5e5530ead524@cloudflare.com
====================

Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-0-f5c5b4149ab9@cloudflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After enabling UDP GSO for devices not offering checksum offload, we have
hit a regression where a bad offload warning can be triggered when sending
a datagram with IPv6 extension headers.

Extend the UDP GSO IPv6 tests to cover this scenario.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-3-f5c5b4149ab9@cloudflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 10154dbd ("udp: Allow GSO transmit from devices with no
checksum offload") we have intentionally allowed UDP GSO packets marked
CHECKSUM_NONE to pass to the GSO stack, so that they can be segmented and
checksummed by a software fallback when the egress device lacks these
features.

What was not taken into consideration is that a CHECKSUM_NONE skb can be
handed over to the GSO stack also when the egress device advertises the
tx-udp-segmentation / NETIF_F_GSO_UDP_L4 feature.

This will happen when there are IPv6 extension headers present, which we
check for in __ip6_append_data(). Syzbot has discovered this scenario,
producing a warning as below:

  ip6tnl0: caps=(0x00000006401d7869, 0x00000006401d7869)
  WARNING: CPU: 0 PID: 5112 at net/core/dev.c:3293 skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291
  Modules linked in:
  CPU: 0 PID: 5112 Comm: syz-executor391 Not tainted 6.10.0-rc7-syzkaller-01603-g80ab5445 #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
  RIP: 0010:skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291
  [...]
  Call Trace:
   <TASK>
   __skb_gso_segment+0x3be/0x4c0 net/core/gso.c:127
   skb_gso_segment include/net/gso.h:83 [inline]
   validate_xmit_skb+0x585/0x1120 net/core/dev.c:3661
   __dev_queue_xmit+0x17a4/0x3e90 net/core/dev.c:4415
   neigh_output include/net/neighbour.h:542 [inline]
   ip6_finish_output2+0xffa/0x1680 net/ipv6/ip6_output.c:137
   ip6_finish_output+0x41e/0x810 net/ipv6/ip6_output.c:222
   ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1958
   udp_v6_send_skb+0xbf5/0x1870 net/ipv6/udp.c:1292
   udpv6_sendmsg+0x23b3/0x3270 net/ipv6/udp.c:1588
   sock_sendmsg_nosec net/socket.c:730 [inline]
   __sock_sendmsg+0xef/0x270 net/socket.c:745
   ____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
   ___sys_sendmsg net/socket.c:2639 [inline]
   __sys_sendmmsg+0x3b2/0x740 net/socket.c:2725
   __do_sys_sendmmsg net/socket.c:2754 [inline]
   __se_sys_sendmmsg net/socket.c:2751 [inline]
   __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2751
   do_syscall_x64 arch/x86/entry/common.c:52 [inline]
   do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
   entry_SYSCALL_64_after_hwframe+0x77/0x7f
   [...]
   </TASK>

We are hitting the bad offload warning because when an egress device is
capable of handling segmentation offload requested by
skb_shinfo(skb)->gso_type, the chain of gso_segment callbacks won't produce
any segment skbs and return NULL. See the skb_gso_ok() branch in
{__udp,tcp,sctp}_gso_segment helpers.

To fix it, force a fallback to software USO when processing a packet with
IPv6 extension headers, since we don't know if these can checksummed by
all devices which offer USO.

Fixes: 10154dbd ("udp: Allow GSO transmit from devices with no checksum offload")
Reported-by: syzbot+e15b7e15b8a751a91d9a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-2-f5c5b4149ab9@cloudflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

UDP segmentation offload inherently depends on checksum offload. It should
not be possible to disable checksum offload while leaving USO enabled.
Enforce this dependency in code.

There is a single tx-udp-segmentation feature flag to indicate support for
both IPv4/6, hence the devices wishing to support USO must offer checksum
offload for both IP versions.

Fixes: 10154dbd ("udp: Allow GSO transmit from devices with no checksum offload")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-1-f5c5b4149ab9@cloudflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1]

We must make sure the IPv4 or Ipv6 header is pulled in skb->head
before accessing fields in them.

Use pskb_inet_may_pull() to fix this issue.

[1]
BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline]
 BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline]
 BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281
  ipv6_pdp_find drivers/net/gtp.c:220 [inline]
  gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline]
  gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281
  __netdev_start_xmit include/linux/netdevice.h:4913 [inline]
  netdev_start_xmit include/linux/netdevice.h:4922 [inline]
  xmit_one net/core/dev.c:3580 [inline]
  dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596
  __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423
  dev_queue_xmit include/linux/netdevice.h:3105 [inline]
  packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3145 [inline]
  packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2204
  __do_sys_sendto net/socket.c:2216 [inline]
  __se_sys_sendto net/socket.c:2212 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212
  x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3994 [inline]
  slab_alloc_node mm/slub.c:4037 [inline]
  kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583
  __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674
  alloc_skb include/linux/skbuff.h:1320 [inline]
  alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526
  sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815
  packet_alloc_skb net/packet/af_packet.c:2994 [inline]
  packet_snd net/packet/af_packet.c:3088 [inline]
  packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2204
  __do_sys_sendto net/socket.c:2216 [inline]
  __se_sys_sendto net/socket.c:2212 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212
  x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024

Fixes: 999cb275 ("gtp: add IPv6 support")
Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Harald Welte <laforge@gnumonks.org>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20240808132455.3413916-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.

Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:

* 1 byte (seen on iOS 4.2.1, 8.4):
    * 03: carrier off (mode 0)
    * 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
    * 03 03 03: carrier off (mode 0)
    * 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
    * 03 03 03 00: carrier off (mode 0)
    * 04 03 03 00: carrier off (mode 1)
    * 06 03 03 00: carrier off (mode 4)
    * 04 04 03 04: carrier on (mode 0 and 1)
    * 06 04 03 04: carrier on (mode 4)

Before this change, the driver always used the first byte of the
response to determine carrier state.

From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.

Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.

Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.

Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RX callbacks can fail for multiple reasons:

* Payload too short
* Payload formatted incorrecly (e.g. bad NCM framing)
* Lack of memory

None of these should cause the driver to seize up.

Make such failures non-critical and continue processing further
incoming URBs.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>

On iPhone 15 Pro Max one can observe periodic URBs with no payload
on the "bulk in" (RX) endpoint. These don't seem to do anything
meaningful. Reproduced on iOS 17.5.1 and 17.6.

This behaviour isn't observed on iPhone 11 on the same iOS version. The
nature of these zero-length URBs is so far unknown.

Drop RX URBs with no payload.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rx URB length was already checked in ipheth_rcvbulk_callback_legacy()
and ipheth_rcvbulk_callback_ncm(), depending on the current mode.
The check in ipheth_rcvbulk_callback() was thus mostly a duplicate.

The only place in ipheth_rcvbulk_callback() where we care about the URB
length is for the initial control frame. These frames are always 4 bytes
long. This has been checked as far back as iOS 4.2.1 on iPhone 3G.

Remove the extraneous URB length check. For control frames, check for
the specific 4-byte length instead.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipheth_sndbulk_callback() can submit carrier_work
as a part of its error handling. That means that
the driver must make sure that the work is cancelled
after it has made sure that no more URB can terminate
with an error condition.

Hence the order of actions in ipheth_close() needs
to be inverted.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>