- 15 Jun, 2024 20 commits
-
-
Hans de Goede authored
The ov2680 driver has 9 controls now and the call to v4l2_ctrl_new_fwnode_properties() adds 2 more. Tell v4l2_ctrl_handler_init() to pre-allocate space for 11 controls to match this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Hans de Goede authored
The out of tree IPU6 driver comes with its own copy of the ipu-bridge code. It also comes bundled with standard v4l2 sensor drivers. Many of these have been mainlined and the rest is being mainlined but not all are upstream yet. The latest version of the out of tree code now will use the mainline kernel ipu-bridge version when build against new enough kernels. This however breaks support for (bundled) sensor drivers which do not (yet) have an entry in the mainline ipu-bridge code. Add the missing entries to the mainline ipu-bridge code to make the transition to having everything in mainline easier. The alternative HID for the OV13B10 and the OV08x40 entries both are for sensors already supported in mainline which were missing. The downside of adding these HIDs is that this will cause the IPU3 / IPU6 drivers to delay registering there /dev/video# nodes until a sensor driver has bound, which for the non mainline drivers may never happen. This is not really an issue because almost all IPU designs only have front (user) facing sensors and all the added HIDs are for the main RGB (not IR) sensor. So if the sensor driver is missing then the user can already not use the camera and adding these HIDs does not really change that. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Hans de Goede authored
Sort the sensors in ipu_supported_sensors[] by ACPI HID rather then having them in some random order. While at it also use the correct (same as datasheet) capitalization for the sensor names in the comments. Instead of sometimes writing OV#### and sometimes ov####. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Tommaso Merciai authored
Into alvium cameras REG_BCRM_GAIN_RW control the analog gain. Let's use the right V4L2_CID_ANALOGUE_GAIN ctrl. Fixes: 0a7af872 ("media: i2c: Add support for alvium camera") Cc: stable@vger.kernel.org Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Tommaso Merciai authored
Implement the enum_frame_size pad operation. The sensor supports a continuous size range of resolutions. Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Tommaso Merciai authored
Alvium camera by default is in free running mode. Datasheet say that acquisition frame rate reg can only be used if frame start trigger mode is set to off. Enable r/w acquisition frame rate and turn off trigger mode. Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> [Sakari Ailus: Fix spelling of "acquisition".] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Tommaso Merciai authored
Acquisition frame rate enable reg have a very long name let's reduce this with an abbreviation. Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> [Sakari Ailus: Fix spelling of "acquisition".] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Tommaso Merciai authored
Instead of reading device_fw reg as multiple regs let's read the entire 64bit reg using one i2c read and use bit masks and bit shifts to get fw info. Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Wentong Wu authored
The privacy status is maintained by privacy_ctrl, on which all of the privacy status changes will go through, so there is no point in maintaining one more element any more. Reported-by: Hao Yao <hao.yao@intel.com> Signed-off-by: Wentong Wu <wentong.wu@intel.com> Tested-by: Jason Chen <jason.z.chen@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Wentong Wu authored
Prior to the ongoing command privacy is on, it would return -1 to indicate the current privacy status, and the ongoing command would be well executed by firmware as well, so this is not error. This patch changes its behavior to notify privacy on directly by V4L2 privacy control instead of reporting error. Fixes: 29006e19 ("media: pci: intel: ivsc: Add CSI submodule") Cc: stable@vger.kernel.org # for 6.6 and later Reported-by: Hao Yao <hao.yao@intel.com> Signed-off-by: Wentong Wu <wentong.wu@intel.com> Tested-by: Jason Chen <jason.z.chen@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Wentong Wu authored
There're possibilities that privacy status change notification happens in the middle of the ongoing mei command which already takes the command lock, but v4l2_ctrl_s_ctrl() would also need the same lock prior to this patch, so this may results in circular locking problem. This patch adds one dedicated lock for v4l2 control handler to avoid described issue. Fixes: 29006e19 ("media: pci: intel: ivsc: Add CSI submodule") Cc: stable@vger.kernel.org # for 6.6 and later Reported-by: Hao Yao <hao.yao@intel.com> Signed-off-by: Wentong Wu <wentong.wu@intel.com> Tested-by: Jason Chen <jason.z.chen@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ricardo Ribalda authored
Replace the older style one-element array with a flexible array member. There does not seem to be any allocation for these structs in the code, so no more code changes are required. The following cocci warnings are fixed: drivers/media/dvb-frontends/mxl5xx_defs.h:182:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/dvb-frontends/mxl5xx_defs.h:171:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ricardo Ribalda authored
clang 19 complains about the missing parameter name. Let's add it. drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-debugfs.h:19:62: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions] Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406050908.1kL1C69p-lkp@intel.com/ Fixes: e22b4973 ("media: c8sectpfe: Do not depend on DEBUG_FS") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/tuners/tda9887.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/radio/si470x/radio-si470x-common.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ttpci/budget-core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/bt8xx/bt878.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ivtv/ivtvfb.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007-usb.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-empress.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-go7007.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-alsa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-dvb.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mcam-core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mmp_camera.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Aleksandr Burakov authored
Return value of function 'i2c_transfer' is not checked that may cause undefined behaviour. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2cf36ac4 ("[PATCH] v4l: 656: added support for the following cards") Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
- 14 Jun, 2024 1 commit
-
-
Hans Verkuil authored
The CENTERED_RECTANGLE define fails to compile on clang and old gcc versions. Just drop it and fill in the crop rectangles explicitly. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
-
- 13 Jun, 2024 2 commits
-
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Rafał Miłecki authored
This helps validating DTS files. Introduced changes: 1. Reworded title 2. Made "bus" clock required on MT7623 as well 3. Added required #include-s and adjusted "reg" & clocks in example Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
- 10 Jun, 2024 8 commits
-
-
Ming Qian authored
Report the average QP value of the current encoded frame via the V4L2_CID_MPEG_VIDEO_AVERAGE_QP control, the value applies to the last dequeued capture buffer. Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ming Qian authored
There is no need to add a lock in s_ctrl callback, it has been synchronized by the ctrl_handler's lock, otherwise it may led to a deadlock if the driver calls v4l2_ctrl_s_ctrl(). Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ming Qian authored
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP value of the current encoded frame. The value applies to the last dequeued capture buffer. Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Douglas Anderson authored
As talked about in commit 14d3ae2e ("ARM: 8507/1: dma-mapping: Use DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc"), it doesn't really make sense to try to allocate contiguous chunks of memory for video encoding/decoding. Let's switch the Mediatek vcodec driver to pass DMA_ATTR_ALLOC_SINGLE_PAGES and take some of the stress off the memory subsystem. Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Fei Shao <fshao@chromium.org> Reviewed-by: Fei Shao <fshao@chromium.org> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Yunfei Dong authored
Both 'bs_dma' and 'dma_addr' are integers. No need to convert the type from dma_addr_t to uint64_t again. Fixes: d353c3c3 ("media: mediatek: vcodec: support 36 bits physical address") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Irui Wang authored
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi is valid for future use. Fixes: 590577a4 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver") Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Yunfei Dong authored
The supported decoder commands are different for stateless and stateful architectures. Add stateless decoder commands to fix the v4l2-compliance test error below. Codec ioctls: VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device) VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device) test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device) test VIDIOC_G_ENC_INDEX: OK (Not Supported) VIDIOC_DECODER_CMD returned -1 (Invalid argument) VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument) VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument) fail: v4l2-test-codecs.cpp(126): ret test VIDIOC_(TRY_)DECODER_CMD: FAIL Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Hans Verkuil authored
Linux 6.10-rc3 This is needed for the ipu6 and mei fixes. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
- 09 Jun, 2024 5 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Update copies of kernel headers, which resulted in support for the new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector, 'map_shadow_stack' syscall for x86-32. - Revert perf.data record memory allocation optimization that ended up causing a regression, work is being done to re-introduce it in the next merge window. - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when interrupting the build. * tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event" tools headers arm64: Sync arm64's cputype.h with the kernel sources tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL tools headers UAPI: Update i915_drm.h with the kernel sources tools headers UAPI: Sync kvm headers with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION perf beauty: Update copy of linux/socket.h with the kernel sources tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync linux/stat.h with the kernel sources
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: - Convert PCI core error codes to proper error numbers since latter get propagated all the way up to the module loading functions * tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/igen6: Convert PCIBIOS_* return codes to errnos EDAC/amd64: Convert PCIBIOS_* return codes to errnos
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One fix for the SiFive PRCI clocks so that the device boots again. This driver was registering clkdev lookups that were always going to be useless. This wasn't a problem until clkdev started returning an error in these cases, causing this driver to fail probe, and thus boot to fail because clks are essential for most drivers. The fix is simple, don't use clkdev because this is a DT based system where clkdev isn't used" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sifive: Do not register clkdevs for PRCI clocks
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Two small smb3 client fixes: - fix deadlock in umount - minor cleanup due to netfs change" * tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Don't advance the I/O iterator before terminating subrequest smb: client: fix deadlock in smb2_find_smb_tcon()
-
- 08 Jun, 2024 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - fix potential read out of bounds in hid-asus (Andrew Ballance) - fix endian-conversion on little endian systems in intel-ish-hid (Arnd Bergmann) - A couple of new input event codes (Aseda Aboagye) - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo (Christophe JAILLET), hid-logitech-dj (José Expósito) - current leakage fix while the device is in suspend on a i2c-hid laptop (Johan Hovold) - other assorted smaller fixes and device ID / quirk entry additions * tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Ignore battery for ELAN touchscreens 2F2C and 4116 HID: i2c-hid: elan: fix reset suspend current leakage dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema input: Add support for "Do Not Disturb" input: Add event code for accessibility key hid: asus: asus_report_fixup: fix potential read out of bounds HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro HID: intel-ish-hid: fix endian-conversion HID: nintendo: Fix an error handling path in nintendo_hid_probe() HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode() HID: core: remove unnecessary WARN_ON() in implement() HID: nvidia-shield: Add missing check for input_ff_create_memless HID: intel-ish-hid: Fix build error for COMPILE_TEST
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix the initial state of the save button in 'make gconfig' - Improve the Kconfig documentation - Fix a Kconfig bug regarding property visibility - Fix build breakage for systems where 'sed' is not installed in /bin - Fix a false warning about missing MODULE_DESCRIPTION() * tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh kconfig: remove wrong expr_trans_bool() kconfig: doc: document behavior of 'select' and 'imply' followed by 'if' kconfig: doc: fix a typo in the note about 'imply' kconfig: gconf: give a proper initial state to the Save button kconfig: remove unneeded code for user-supplied values being out of range
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - fixes for the new ipu6 driver (and related fixes to mei csi driver) - fix a double debugfs remove logic at mgb4 driver - a documentation fix * tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: intel/ipu6: add csi2 port sanity check in notifier bound media: intel/ipu6: update the maximum supported csi2 port number to 6 media: mei: csi: Warn less verbosely of a missing device fwnode media: mei: csi: Put the IPU device reference media: intel/ipu6: fix the buffer flags caused by wrong parentheses media: intel/ipu6: Fix an error handling path in isys_probe() media: intel/ipu6: Move isys_remove() close to isys_probe() media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove() media: Documentation: v4l: Fix ACTIVE route flag media: mgb4: Fix double debugfs remove
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: - Fix possible memory leak the riscv-intc irqchip driver load failures - Fix boot crash in the sifive-plic irqchip driver caused by recently changed boot initialization order - Fix race condition in the gic-v3-its irqchip driver * tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update() irqchip/sifive-plic: Chain to parent IRQ after handlers are ready irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails
-