- 21 Apr, 2020 10 commits
-
-
Ping-Ke Shih authored
8723D use SIPI to indirectly read RF register instead of directly read, so introduce a new struct rtw_rf_sipi_addr and new function rtw_phy_read_rf_sipi(). Since other chips don't use the new function, only 8723D needs to fill struct rtw_rf_sipi_addr in rtw_chip_info. Because there are two kinds of functions for reading RF registers now, change rtw_phy_read_rf() to chip->ops->read_rf() in rtw_phy_write_rf_reg_sipi() so that we can switch tp proper RF read functions depends on the type of the chip. Though 8723D is an 1x1 chip, it has two RF PHY and we can switch to one of them, and that should be configured properly. Hence, add a fix_rf_phy_num to struct rtw_chip_info to allow driver to set one of the PHY's registers for 8723D, even it is only 1x1. Another variable rf_phy_num is introduced to keep the constraint number of RF path we can access, and its value is: rf_phy_num = (fix_rf_phy_num ? fix_rf_phy_num : rf_path_num) Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200420055054.14592-5-yhchuang@realtek.com
-
Ping-Ke Shih authored
Add corresponding power sequence for 8723D devices Signed-off-by:
-
Ping-Ke Shih authored
8723D doesn't support beamform because rtw88 only supports VHT beamform but 8723d doesn't have VHT capability. Though 8723d doesn't support beamform, BSS_CHANGED_MU_GROUPS is still marked as changed when doing disassociation. So, add wrapper functions for all beamform ops to make sure they aren't NULL before calling. Signed-off-by:
-
Ping-Ke Shih authored
RTL8723DE is an 11n 1x1 2.4G single band chip with the following capabilities: - TX/RX BD size: 16/8 - TX/RX desc size: 40/24 - physical/logical/protected efuse size: 512/512/96 - TX gain index factor: 1 - max TX power index: 0x3F - band: 2G - HT: support - VHT: Not support Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:617:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:622:13-19: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:627:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:632:13-19: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:937:5-13: WARNING: Comparison to bool Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c:79:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c:81:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c:77:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c:79:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c:78:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c:80:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c:81:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c:83:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c:70:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c:72:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
- 15 Apr, 2020 13 commits
-
-
Nils ANDRÉ-CHANG authored
Signed-off-by:
Nils ANDRÉ-CHANG <nils@nilsand.re> Signed-off-by:
-
Jason Yan authored
This function actually needs no return value. So remove the unneeded variable 'ret' and make it void. This also fixes the following coccicheck warning: drivers/net/wireless/intel/ipw2x00/ipw2200.c:10648:5-8: Unneeded variable: "ret". Return "0" on line 10684 Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.c:309:5-13: Unneeded variable: "ret_code". Return "0" on line 328 Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/intersil/orinoco/spectrum_cs.c:281:5-8: Unneeded variable: "err". Return "0" on line 286 Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/marvell/libertas/cmdresp.c:225:5-8: Unneeded variable: "ret". Return "0" on line 355 Reported-by:
-
Jules Irenge authored
Sparse reports a warning at brcms_down() warning: context imbalance in brcms_down() - unexpected unlock The root cause is the missing annotation at brcms_down() Add the missing __must_hold(&wl->lock) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports a warning at brcms_rfkill_set_hw_state() warning: context imbalance in brcms_rfkill_set_hw_state() - unexpected unlock The root cause is the missing annotation at brcms_rfkill_set_hw_state() Add the missing __must_hold(&wl->lock) annotation Signed-off-by:
-
Jules Irenge authored
Sparse reports warnings at prism2_bss_list_proc_start() and prism2_bss_list_proc_stop() warning: context imbalance in prism2_wds_proc_stop() - unexpected unlock warning: context imbalance in prism2_bss_list_proc_start() - wrong count at exit The root cause is the missing annotations at prism2_bss_list_proc_start() Add the missing __acquires(&local->lock) annotation Add the missing __releases(&local->lock) annotation Signed-off-by:
-
Yan-Hsuan Chuang authored
User space program such as iw can set antenna mask for the device. So add set antenna support by configure the trx mode. This is useful for some tests want to see the output of different antenna configuration (e.g. path A v.s. path B). Signed-off-by:
-
Yan-Hsuan Chuang authored
To support ieee80211_ops::set_antenna, the driver can decide if the antenna mask is accepted, otherwise it can return an error code. Because each chip could have different limitations, let the chip check the mask and return. Also the antenna mask for TRX from upper space is 32-bit long. Change the antenna mask for rtw_chip_ops::set_antenna from u8 to u32. Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/marvell/libertas/mesh.c:833:5-8: Unneeded variable: "ret". Return "0" on line 874 Reported-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/st/cw1200/cw1200_spi.c:273:5-8: Unneeded variable: "ret". Return "0" on line 279 Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/intel/ipw2x00/ipw2200.c:7048:5-8: Unneeded variable: "ret". Return "0" on line 7055 Reported-by:
-
- 14 Apr, 2020 16 commits
-
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:3773:5-8: Unneeded variable: "err". Return "0" on line 3781 Reported-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Christophe JAILLET authored
There is no need to re-implement 'netdev_alloc_skb_ip_align()' here. Keep the code simple. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by:
-
Larry Finger authored
This patch fixes commit 75388acd ("add mac80211-based driver for legacy BCM43xx devices") In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in b43legacy is reported. Upon testing, thus problem exists on PPC and X86 platforms, is present in the oldest kernel tested (3.2), and has been present in the driver since it was first added to the kernel. The problem is a corrupted channel status received from the device. Both the internal card in a PowerBook G4 and the PCMCIA version (Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2 (revision 4 of the 802.11 core) of the chip has been tested. No other devices using b43legacy are available for testing. Various sources of the problem were considered. Buffer overrun and other sources of corruption within the driver were rejected because the faulty channel status is always the same, not a random value. It was concluded that the faulty data is coming from the device, probably due to a firmware bug. As that source is not available, the driver must take appropriate action to recover. At present, the driver reports the error, and them continues to process the bad packet. This is believed that to be a mistake, and the correct action is to drop the correpted packet. Fixes: 75388acd ("add mac80211-based driver for legacy BCM43xx devices") Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Reported-and-tested by: F. Erhard <erhard_f@mailbox.org> Signed-off-by:
-
Kai-Heng Feng authored
On some systems we can constanly see rtw88 complains: [39584.721375] rtw_pci 0000:03:00.0: failed to send h2c command Increase interval of each check to wait the status bit really changed. Use read_poll_timeout() macro which fits anything we need here. Suggested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Giuseppe Marco Randazzo authored
This patch adds the AirVasT USB wireless devices 124a:4026 to the list of supported devices. It's using the ISL3886 usb firmware. Without this modification, the wiki adapter is not recognized. Cc: <stable@vger.kernel.org> Signed-off-by:
Giuseppe Marco Randazzo <gmrandazzo@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [formatted, reworded] Signed-off-by:
-
Colin Ian King authored
Pointer 'address' is being assigned and updated in a few places by it is never read. Hence the assignments are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Qiujun Huang authored
There is a typo in debug message. Fix it. s/throld/threshold Signed-off-by:
Qiujun Huang <hqjagain@gmail.com> Signed-off-by:
-
Qiujun Huang authored
There is a spelling mistake in a trace message. Fix it. Signed-off-by:
-
Jaehoon Chung authored
sup_wpa feature is getting after setting feature_disable flag. If firmware is supported sup_wpa feature, it's always enabled regardless of feature_disable flag. Fixes: b8a64f0e ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK") Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
-
YueHaibing authored
Fix sparse warnings: drivers/net/wireless/realtek/rtw88/fw.c:633:4: warning: symbol 'rtw_get_rsvd_page_probe_req_location' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/fw.c:650:5: warning: symbol 'rtw_get_rsvd_page_probe_req_size' was not declared. Should it be static? Reported-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.8. Major changes: ath11k * add debugfs file for testing ADDBA and DELBA ath10k * enable VHT160 and VHT80+80 modes * enable radar detection in secondary segment * sdio: disable TX complete indication to improve throughput
-
Manikanta Pubbisetty authored
During RX, accessing the reo dest ring descriptor directly is consuming a lot of CPU cycles. Accessing the descriptor after copying it locally has improved CPU usage by around ~10-15% while measuring throughput in RX DBTC test cases(all radios are involved in the throughput measurement). HW tested: IPQ8074 Signed-off-by:
Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by:
-
Manikanta Pubbisetty authored
Unlike CE interrupts, DP interrupts are not enabled/disabled at source; they are enabled/disabled only at GIC level, therefore it is required to set IRQ_DISABLE_UNLAZY flag to avoid spurious interrupts. Signed-off-by:
-
Aloka Dixit authored
TWT feature fails on radio2 because physical device count is hardcoded to 2. Set value dynamically. Signed-off-by:
Aloka Dixit <alokad@codeaurora.org> Signed-off-by:
-
Karthikeyan Periyasamy authored
Modify the interrupt timer threshold param as 256 to avoid HW watchdog in heavy multicast traffic scenario. Signed-off-by:
Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by:
-
Karthikeyan Periyasamy authored
Add the pdev index information in the peer object to validate the peer creation. Ignore the peer creation request, if the given MAC address is already present in the peer list with same radio. If we allow the peer creation in above scenario, FW assert will happen. Above scenario occurred in two cases, where Multiple AP VAP created in the same radio. 1. when testing tool sends association request to two AP with same MAC address 2. when a station do roaming from one AP VAP to another AP VAP. Signed-off-by:
-
- 12 Apr, 2020 1 commit
-
-
Linus Torvalds authored
-
