- 06 Dec, 2023 1 commit
-
-
Thomas Zimmermann authored
Invoke drm_plane_helper_funcs.end_fb_access before drm_atomic_helper_commit_hw_done(). The latter function hands over ownership of the plane state to the following commit, which might free it. Releasing resources in end_fb_access then operates on undefined state. This bug has been observed with non-blocking commits when they are being queued up quickly. Here is an example stack trace from the bug report. The plane state has been free'd already, so the pages for drm_gem_fb_vunmap() are gone. Unable to handle kernel paging request at virtual address 0000000100000049 [...] drm_gem_fb_vunmap+0x18/0x74 drm_gem_end_shadow_fb_access+0x1c/0x2c drm_atomic_helper_cleanup_planes+0x58/0xd8 drm_atomic_helper_commit_tail+0x90/0xa0 commit_tail+0x15c/0x188 commit_work+0x14/0x20 Fix this by running end_fb_access immediately after updating all planes in drm_atomic_helper_commit_planes(). The existing clean-up helper drm_atomic_helper_cleanup_planes() now only handles cleanup_fb. For aborted commits, roll back from drm_atomic_helper_prepare_planes() in the new helper drm_atomic_helper_unprepare_planes(). This case is different from regular cleanup, as we have to release the new state; regular cleanup releases the old state. The new helper also invokes cleanup_fb for all planes. The changes mostly involve DRM's atomic helpers. Only two drivers, i915 and nouveau, implement their own commit function. Update them to invoke drm_atomic_helper_unprepare_planes(). Drivers with custom commit_tail function do not require changes. v4: * fix documentation (kernel test robot) v3: * add drm_atomic_helper_unprepare_planes() for rolling back * use correct state for end_fb_access v2: * fix test in drm_atomic_helper_cleanup_planes() Reported-by:
Alyssa Ross <hi@alyssa.is> Closes: https://lore.kernel.org/dri-devel/87leazm0ya.fsf@alyssa.is/Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Fixes: 94d879ea ("drm/atomic-helper: Add {begin,end}_fb_access to plane helpers") Tested-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> # v6.2+ Link: https://patchwork.freedesktop.org/patch/msgid/20231204083247.22006-1-tzimmermann@suse.de
-
- 05 Dec, 2023 1 commit
-
-
Arnd Bergmann authored
A dependency on this feature was recently introduced: x86_64-linux-ld: vmlinux.o: in function `tc358768_bridge_pre_enable': tc358768.c:(.text+0xbe3dae): undefined reference to `drm_display_mode_to_videomode' Make sure this is always enabled. Fixes: e5fb2167 ("drm/bridge: tc358768: Use struct videomode") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231204072814.968816-1-arnd@kernel.orgSigned-off-by:
-
- 30 Nov, 2023 3 commits
-
-
Adrián Larumbe authored
It was noticed when setting the Panfrost's DVFS device to the performant governor, GPU frequency as reported by fdinfo had dropped to 0 permamently. There are two separate issues causing this behaviour: - Not initialising the device's current_frequency variable to its original value during device probe(). - Updating said variable in Panfrost devfreq's get_dev_status() rather than after the new OPP's frequency had been retrieved in target(), which meant the old frequency would be assigned instead. Signed-off-by:
Adrián Larumbe <adrian.larumbe@collabora.com> Fixes: f11b0417 ("drm/panfrost: Add fdinfo support GPU load metrics") Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Adrián Larumbe authored
A GEM object constructed from a dma-buf imported sgtable should be regarded as being memory resident, because the dma-buf API mandates backing storage to be allocated when attachment succeeds. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
-
Dave Airlie authored
This is a hack around a bug exposed with the GSP code, I'm not sure what is happening exactly, but it appears some of our flushes don't result in proper tlb invalidation for out BAR2 and we get a BAR2 fault from GSP and it all dies. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231130010852.4034774-1-airlied@gmail.com
-
- 29 Nov, 2023 6 commits
-
-
Timur Tabi authored
Document a few aspects of communication with GSP-RM. These comments are derived from notes made during early development of GSP-RM support in Nouveau, but were not included in the initial patch set. Reviewed-by:
Timur Tabi <ttabi@nvidia.com> Reviewed-by:
-
Yang Yingliang authored
mipi_dsi_device_register_full() never returns NULL pointer, it will return ERR_PTR() when it fails, so replace the check with IS_ERR(). Fixes: 0993234a ("drm/panel: Add driver for Novatek NT36523") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
-
xiazhengqiao authored
For the "starry, 2081101qfh032011-53g" panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 6069b66c ("drm/panel: support for STARRY 2081101QFH032011-53G MIPI-DSI panel") Signed-off-by:
xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com> Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.comSigned-off-by:
-
Gustavo A. R. Silva authored
Fake flexible arrays (zero-length and one-element arrays) are deprecated, and should be replaced by flexible-array members. So, replace zero-length array with a flexible-array member in `struct PACKED_REGISTRY_TABLE`. Also annotate array `entries` with `__counted_by()` to prepare for the coming implementation by GCC and Clang of the `__counted_by` attribute. Flexible array members annotated with `__counted_by` can have their accesses bounds-checked at run-time via `CONFIG_UBSAN_BOUNDS` (for array indexing) and `CONFIG_FORTIFY_SOURCE` (for strcpy/memcpy-family functions). This fixes multiple -Warray-bounds warnings: drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1069:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1070:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1071:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1072:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] While there, also make use of the struct_size() helper, and address checkpatch.pl warning: WARNING: please, no spaces at the start of a line This results in no differences in binary output. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Dan Carpenter authored
This unlock doesn't belong here and it leads to a double unlock in the caller, r535_gsp_rpc_push(). Fixes: 176fdcbd ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Dave Airlie authored
With the new uapi we don't have the comp flags on the allocation, so we shouldn't be using the first size that works, we should be iterating until we get the correct one. This reduces allocations from 2MB to 64k in lots of places. Fixes dEQP-VK.memory.allocation.basic.size_8KiB.forward.count_4000 on my ampere/gsp system. Cc: stable@vger.kernel.org # v6.6 Signed-off-by:
Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by:
-
- 28 Nov, 2023 4 commits
-
-
Thomas Hellström authored
"GPL-2.0-only" in the license header was incorrectly changed to the now deprecated "GPL-2.0". Fix. Cc: Maxime Ripard <mripard@kernel.org> Cc: Danilo Krummrich <dakr@redhat.com> Reported-by:
David Edelsohn <dje.gcc@gmail.com> Closes: https://lore.kernel.org/dri-devel/5lfrhdpkwhpgzipgngojs3tyqfqbesifzu5nf4l5q3nhfdhcf2@25nmiq7tfrew/T/#m5c356d68815711eea30dd94cc6f7ea8cd4344fe3 Fixes: f7749a54 ("drm/gpuvm: Dual-licence the drm_gpuvm code GPL-2.0 OR MIT") Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Acked-by:
-
Linus Walleij authored
This reverts commit 199cf07e. This patch creates bugs on devices where the DRM device is the ancestor of the panel devices. Attempts to fix this have failed because it leads to using device core functionality which is questionable. Reported-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/Signed-off-by:
-
Linus Walleij authored
This reverts commit 1d5e8f4b. Greg says: "why exactly is this needed? Nothing outside of the driver core should be needing this function, it shouldn't be public at all (I missed that before.) So please, revert it for now, let's figure out why DRM thinks this is needed for it's devices, and yet no other bus/subsystem does." Link: https://lore.kernel.org/dri-devel/2023112739-willing-sighing-6bdd@gregkh/Signed-off-by:
-
Linus Walleij authored
This reverts commit 39d5b6a6. This patch was causing build errors by using an unexported function from the device core, which Greg questions the saneness in exporting. Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/Signed-off-by:
-
- 27 Nov, 2023 2 commits
-
-
Christian König authored
It's valid to add the same fence multiple times to a dma-resv object and we shouldn't need one extra slot for each. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Liu Ying authored
Export device_is_dependent() since the drm_kms_helper module is starting to use it. Signed-off-by:
Liu Ying <victor.liu@nxp.com> Signed-off-by:
-
- 24 Nov, 2023 1 commit
-
-
Liu Ying authored
Some panel devices already depend on DRM device, like the panel in arch/arm/boot/dts/st/ste-ux500-samsung-skomer.dts, because DRM device is the ancestor of those panel devices. device_link_add() would fail by returning a NULL pointer for those panel devices because of the existing dependency. So, check the dependency by calling device_is_dependent() before adding or deleting device link between panel device and DRM device so that the link is managed only for independent panel devices. Fixes: 88787801 ("drm/bridge: panel: Fix device link for DRM_BRIDGE_ATTACH_NO_CONNECTOR") Fixes: 199cf07e ("drm/bridge: panel: Add a device link between drm device and panel device") Reported-by:
-
- 21 Nov, 2023 4 commits
-
-
Dave Airlie authored
This probably isn't the ideal fix, but we ended up using chids sparsely, and lots of things rely on indexing into the full range, so just allocate the full range up front. The GSP code fixes 8 channels into a userd page, but we end up using a single userd page per channel so end up sparsely using the range. Fixes a few crashes seen with multiple channels. Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/277Signed-off-by:
-
Cong Yang authored
The refresh reported by modetest is 60.46Hz, and the actual measurement is 60.01Hz, which is outside the expected tolerance. Adjust hporch and pixel clock to fix it. After repair, modetest and actual measurement were all 60.01Hz. Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime /DSI CLK. Assume that the DSI controller could not make the mode that we requested(presumably it's PLL couldn't generate the exact pixel clock?). If you use a different DSI controller, you may need to readjust these parameters. Now this panel looks like it's only used by me on the MTK platform, so let's change this set of parameters. Fixes: 1bc2ef06 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by:
Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Thomas Zimmermann authored
Many user-space compositors fail with mode setting if a CRTC has more than one connected connector. This is the case with the BMC on Aspeed systems. Work around this problem by setting the BMC's connector status to disconnected when the physical connector has a display attached. This way compositors will only see one connected connector at a time; either the physical one or the BMC. Suggested-by:
Jocelyn Falempe <jfalempe@redhat.com> Fixes: e329cb53 ("drm/ast: Add BMC virtual connector") Signed-off-by:
-
Jacek Lawrynowicz authored
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET register. IP will be reset by FLR or by entering d0i3. Also IP reset during power_up is not needed as the VPU is already in reset. Removing MMIO reset improves stability as it a partial device reset that is not safe in some corner cases. This change also brings back ivpu_boot_pwr_domain_disable() that helps to properly power down VPU when it is hung by a buggy workload. Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Fixes: 828d6304 ("accel/ivpu: Don't enter d0i3 during FLR") Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
-
- 20 Nov, 2023 1 commit
-
-
Jonas Karlman authored
Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328 and RK3399 result in wrong colors being displayed. The issue can be observed using modetest: modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24 modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24 Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP full framework (IP version 3.x) compared to VOP little framework (2.x). Fix colors by applying different rb swap for VOP full framework (3.x) and VOP little framework (2.x) similar to vendor 4.4 kernel. Fixes: 85a359f2 ("drm/rockchip: Add BGR formats to VOP") Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Tested-by:
Diederik de Haas <didi.debian@cknow.org> Reviewed-by:
Christopher Obbard <chris.obbard@collabora.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se
-
- 19 Nov, 2023 2 commits
-
-
Marek Vasut authored
The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840 ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
-
Marek Vasut authored
Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description, ones which match both the datasheet and the panel display_timing flags . Fixes: 1e29b840 ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by:
-
- 17 Nov, 2023 1 commit
-
-
Xuxin Xiong authored
For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 56ad624b ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel") Signed-off-by:
Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by:
-
- 15 Nov, 2023 3 commits
-
-
Dave Airlie authored
If we get back ENODEV don't fail load. There are nvidia devices that don't have display blocks and the driver should work on those. Fixes: 15740541 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM") Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/270Signed-off-by:
-
Brenton Simpson authored
The Legion Go has a 2560x1600 portrait screen, with the native "up" facing the right controller (90° CW from the rest of the device). Signed-off-by:
Brenton Simpson <appsforartists@google.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231114233859.274189-1-appsforartists@google.com
-
Arnd Bergmann authored
The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc151 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by:Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by:
-
- 14 Nov, 2023 3 commits
-
-
Dave Airlie authored
This allows it to break the following circular locking dependency. Aug 10 07:01:29 dg1test kernel: ====================================================== Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------ Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock: Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: but task is already holding lock: Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: which lock already depends on the new lock. Aug 10 07:01:29 dg1test kernel: the existing dependency chain (in reverse order) is: Aug 10 07:01:29 dg1test kernel: -> #3 (&event->list_lock#2){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: -> #2 (&device->intr.lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #1 (&event->refs_lock#4){....}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #0 (&fctx->lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: other info that might help us debug this: Aug 10 07:01:29 dg1test kernel: Chain exists of: &fctx->lock --> &device->intr.lock --> &event->list_lock#2 Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario: Aug 10 07:01:29 dg1test kernel: CPU0 CPU1 Aug 10 07:01:29 dg1test kernel: ---- ---- Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock); Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock); Aug 10 07:01:29 dg1test kernel: *** DEADLOCK *** Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236: Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: stack backtrace: Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10 Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 Aug 10 07:01:29 dg1test kernel: Call Trace: Aug 10 07:01:29 dg1test kernel: <TASK> Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90 Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110 Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700 Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc> Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206 Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0 Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950 Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001 Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490 Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280 Aug 10 07:01:29 dg1test kernel: </TASK> Signed-off-by: -
Dan Carpenter authored
The r535_gsp_cmdq_get() function returns error pointers but this code checks for NULL. Also we need to propagate the error pointer back to the callers in r535_gsp_rpc_get(). Returning NULL will lead to a NULL pointer dereference. Fixes: 176fdcbd ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by:
-
Dan Carpenter authored
The if we hit the "continue" statement on the first iteration through the loop then "handle_mux" needs to be set to NULL so we continue looping. Fixes: 176fdcbd ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by:
-
- 13 Nov, 2023 1 commit
-
-
Linus Torvalds authored
-
- 12 Nov, 2023 5 commits
-
-
Miri Korenblit authored
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by:
Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by:
Damian Tometzki <damian@riscv-rocks.de> Acked-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
-
Linus Torvalds authored
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Finish a refactor of pgprot_framebuffer() which dependend on some changes that were merged via the drm tree - Fix some kernel-doc warnings to quieten the bots Thanks to Nathan Lynch and Thomas Zimmermann. * tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code powerpc: Remove file parameter from phys_mem_access_prot() powerpc/machdep: Remove trailing whitespaces
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - ctime caching fix (for setxattr) - encryption fix - DNS resolver mount fix - debugging improvements - multichannel fixes including cases where server stops or starts supporting multichannel after mount - reconnect fix - minor cleanups * tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: handle when server stops supporting multichannel cifs: handle when server starts supporting multichannel Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO smb3: allow dumping session and tcon id to improve stats analysis and debugging smb: client: fix mount when dns_resolver key is not available smb3: fix caching of ctime on setxattr smb3: minor cleanup of session handling code cifs: reconnect work should have reference on server struct cifs: do not pass cifs_sb when trying to add channels cifs: account for primary channel in the interface list cifs: distribute channels across interfaces based on speed cifs: handle cases where a channel is closed smb3: more minor cleanups for session handling routines smb3: minor RDMA cleanup cifs: Fix encryption of cleared, but unset rq_iter data buffers
-
- 11 Nov, 2023 1 commit
-
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Documentation update: Add a note about argument and return value fetching is the best effort because it depends on the type. - objpool: Fix to make internal global variables static in test_objpool.c. - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the same prototypes in asm/kprobes.h for some architectures, but some of them are missing the prototype and it causes a warning. So move the prototype into linux/kprobes.h. - tracing: Fix to check the tracepoint event and return event at parsing stage. The tracepoint event doesn't support %return but if $retval exists, it will be converted to %return silently. This finds that case and rejects it. - tracing: Fix the order of the descriptions about the parameters of __kprobe_event_gen_cmd_start() to be consistent with the argument list of the function. * tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix the order of argument descriptions tracing: fprobe-event: Fix to check tracepoint event and return kprobes: unify kprobes_exceptions_nofify() prototypes lib: test_objpool: make global variables static Documentation: tracing: Add a note about argument and retval access
-
- 10 Nov, 2023 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes and cleanups from Helge Deller: - fix double free and resource leaks in imsttfb - lots of remove callback cleanups and section mismatch fixes in omapfb, amifb and atmel_lcdfb - error code fix and memparse simplification in omapfb * tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits) fbdev: fsl-diu-fb: mark wr_reg_wa() static fbdev: amifb: Convert to platform remove callback returning void fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning fbdev: hyperv_fb: fix uninitialized local variable use fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void fbdev: omapfb/tfp410: Convert to platform remove callback returning void fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void fbdev: omapfb/opa362: Convert to platform remove callback returning void fbdev: omapfb/hdmi: Convert to platform remove callback returning void fbdev: omapfb/dvi: Convert to platform remove callback returning void fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void fbdev: omapfb/dpi: Convert to platform remove callback returning void fbdev: omapfb/analog-tv: Convert to platform remove callback returning void fbdev: atmel_lcdfb: Convert to platform remove callback returning void fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs ...
-
