Skip to content

L
linux
Switch branch/tag
  1. 03 Oct, 2008 18 commits
  3. 02 Oct, 2008 14 commits
  5. 01 Oct, 2008 8 commits
    • Mike Rapoport's avatar
      pxa2xx_spi: fix build breakage · 20b918dc
      Mike Rapoport authored 
      This patch fixes a build error in the pxa2xx-spi driver,
introduced by commit 7e964455
("pxa2xx_spi: dma bugfixes")

  CC      drivers/spi/pxa2xx_spi.o
drivers/spi/pxa2xx_spi.c: In function 'map_dma_buffers':
drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary &
drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary &
drivers/spi/pxa2xx_spi.c: In function 'pump_transfers':
drivers/spi/pxa2xx_spi.c:897: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'

[dbrownell@users.sourceforge.net: fix warning too ]
Signed-off-by: default avatarMike Rapoport <mike@compulab.co.il>
Acked-by: default avatarEric Miao <eric.miao@marvell.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      20b918dc
    • Linus Torvalds's avatar
      Merge branch 'x86-fixes-for-linus' of... · edfd222f
      Linus Torvalds authored 
      Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, vmi: fix broken LDT access
  x86: fix typo in enable_mtrr_cleanup early parameter
      edfd222f
    • David Howells's avatar
      MN10300: Fix IRQ handling · d6478fad
      David Howells authored 
      Fix the IRQ handling on the MN10300 arch.

This patch makes a number of significant changes:

 (1) It separates the irq_chip definition for edge-triggered interrupts from
     the one for level-triggered interrupts.

     This is necessary because the MN10300 PIC latches the IRQ channel's
     interrupt request bit (GxICR_REQUEST), even after the device has ceased to
     assert its interrupt line and the interrupt channel has been disabled in
     the PIC.  So for level-triggered interrupts we need to clear this bit when
     we re-enable - which is achieved by setting GxICR_DETECT but not
     GxICR_REQUEST when writing to the register.

     Not doing this results in spurious interrupts occurring because calling
     mask_ack() at the start of handle_level_irq() is insufficient - it fails
     to clear the REQUEST latch because the device that caused the interrupt is
     still asserting its interrupt line at this point.

 (2) IRQ disablement [irq_chip::disable_irq()] shouldn't clear the interrupt
     request flag for edge-triggered interrupts lest it lose an interrupt.

 (3) IRQ unmasking [irq_chip::unmask_irq()] also shouldn't clear the interrupt
     request flag for edge-triggered interrupts lest it lose an interrupt.

 (4) The end() operation is now left to the default (no-operation) as
     __do_IRQ() is compiled out.  This may affect misrouted_irq(), but
     according to Thomas Gleixner it's the correct thing to do.

 (5) handle_level_irq() is used for edge-triggered interrupts rather than
     handle_edge_irq() as the MN10300 PIC latches interrupt events even on
     masked IRQ channels, thus rendering IRQ_PENDING unnecessary.  It is
     sufficient to call mask_ack() at the start and unmask() at the end.

 (6) For level-triggered interrupts, ack() is now NULL as it's not used, and
     there is no effective ACK function on the PIC.  mask_ack() is now the
     same as mask() as the latch continues to latch, even when the channel is
     masked.

Further, the patch discards the disable() op implementation as its now the same
as the mask() op implementation, which is used instead.

It also discards the enable() op implementations as they're now the same as
the unmask() op implementations, which are used instead.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d6478fad
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm · 7ac9c1c2
      Linus Torvalds authored 
      * git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm mpath: add missing path switching locking
  dm: cope with access beyond end of device in dm_merge_bvec
  dm: always allow one page in dm_merge_bvec
      7ac9c1c2
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · ae1cfb11
      Linus Torvalds authored 
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  af_key: Free dumping state on socket close
  XFRM,IPv6: initialize ip6_dst_blackhole_ops.kmem_cachep
  ipv6: NULL pointer dereferrence in tcp_v6_send_ack
  tcp: Fix NULL dereference in tcp_4_send_ack()
  sctp: Fix kernel panic while process protocol violation parameter
  iucv: Fix mismerge again.
  ipsec: Fix pskb_expand_head corruption in xfrm_state_check_space
      ae1cfb11
    • Chandra Seetharaman's avatar
      dm mpath: add missing path switching locking · 7253a334
      Chandra Seetharaman authored 
      Moving the path activation to workqueue along with scsi_dh patches introduced
a race. It is due to the fact that the current_pgpath (in the multipath data
structure) can be modified if changes happen in any of the paths leading to
the lun. If the changes lead to current_pgpath being set to NULL, then it
leads to the invalid access which results in the panic below.

This patch fixes that by storing the pgpath to activate in the multipath data
structure and properly protecting it.

Note that if activate_path is called twice in succession with different pgpath,
with the second one being called before the first one is done, then activate
path will be called twice for the second pgpath, which is fine.

Unable to handle kernel paging request for data at address 0x00000020
Faulting instruction address: 0xd000000000aa1844
cpu 0x1: Vector: 300 (Data Access) at [c00000006b987a80]
    pc: d000000000aa1844: .activate_path+0x30/0x218 [dm_multipath]
    lr: c000000000087a2c: .run_workqueue+0x114/0x204
    sp: c00000006b987d00
   msr: 8000000000009032
   dar: 20
 dsisr: 40000000
  current = 0xc0000000676bb3f0
  paca    = 0xc0000000006f3680
    pid   = 2528, comm = kmpath_handlerd
enter ? for help
[c00000006b987da0] c000000000087a2c .run_workqueue+0x114/0x204
[c00000006b987e40] c000000000088b58 .worker_thread+0x120/0x144
[c00000006b987f00] c00000000008ca70 .kthread+0x78/0xc4
[c00000006b987f90] c000000000027cc8 .kernel_thread+0x4c/0x68
Signed-off-by: default avatarChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      7253a334
    • Mikulas Patocka's avatar
      dm: cope with access beyond end of device in dm_merge_bvec · b01cd5ac
      Mikulas Patocka authored 
      If for any reason dm_merge_bvec() is given an offset beyond the end of the
device, avoid an oops and always allow one page to be added to an empty bio.
We'll reject the I/O later after the bio is submitted.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      b01cd5ac
    • Mikulas Patocka's avatar
      dm: always allow one page in dm_merge_bvec · 5037108a
      Mikulas Patocka authored 
      Some callers assume they can always add at least one page to an empty bio,
so dm_merge_bvec should not return 0 in this case: we'll reject the I/O
later after the bio is submitted.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      5037108a
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7