- 26 Sep, 2023 40 commits
-
-
Juntong Deng authored
AMD_IP_BLOCK_TYPE_VPE is a new IP BLOCK type for Video Processing Engine, but currently lacks description. Fix the documentation warning: warning: Enum value 'AMD_IP_BLOCK_TYPE_VPE' not described in enum 'amd_ip_block_type' Signed-off-by:
Juntong Deng <juntong.deng@outlook.com> Reviewed-by:
Lang Yu <lang.yu@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Mario Limonciello authored
DC code is reused by other OSes and so Linux return codes don't make sense. Change dc_set_power_state() to boolean and add a wrapper dm_set_power_state() to return a Linux error code for the memory allocation failure. Suggested-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
-
Alex Deucher authored
AGP aperture is deprecated and no longer functional. v2: fix typo (Alex) v3: just skip the agp setup call v4: revert back to the original model v5: back to v3 Reviewed-by:
-
David (Ming Qiang) Wu authored
err_event_athub will corrupt VCPU buffer and not good to be restored in amdgpu_vcn_resume() and in this case the VCPU buffer needs to be cleared for VCN firmware to work properly. Acked-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by:
-
Luben Tuikov authored
Fix a memory leak in amdgpu_fru_get_product_info(). Cc: Alex Deucher <Alexander.Deucher@amd.com> Reported-by:
Yang Wang <kevinyang.wang@amd.com> Fixes: 0dbf2c56 ("drm/amdgpu: Interpret IPMI data for product information (v2)") Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
-
Mario Limonciello authored
During the suspend process dc_set_power_state() will use kzalloc to allocate memory, but this potentially fails with memory pressure. If it fails, the suspend should be aborted. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2362Signed-off-by:
-
Melissa Wen authored
dc->caps.color.mpc.gamut_remap says there is a post-blending color block for gamut remap matrix for DCN3 HW family and newer versions. However, those drivers still follow DCN10 programming that remap stream gamut_remap_matrix to DPP (pre-blending). To enable pre-blending and post-blending gamut_remap matrix supports at the same time, set stream gamut_remap to MPC and plane gamut_remap to DPP for DCN families that support both. It was tested using IGT KMS color tests for DRM CRTC CTM property and it preserves test results. Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Alex Deucher authored
To disable AGP, the start needs to be set to a higher value than the end. Set a default disable value for the AGP aperture and allow the IP specific GMC code to enable it selectively be calling amdgpu_gmc_agp_location(). Reviewed-by:
-
Alex Deucher authored
The BOT register needs to be larger than the TOP register for this to be properly disabled. The lower 22 bits of the BOT address are always 0 and the lower 22 bits of the TOP register are always 1 so you need to make the upper bits of BOT larger than the upper bits of BOT. Reviewed-by:
-
Mangesh Gadre authored
This identifies the physical ordering of devices in the hive v2: fix compilation issue Signed-off-by:
Mangesh Gadre <Mangesh.Gadre@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] After repopulating pipes for a split / merge, we want to find the lowest vlevel that supports the desired mpc combine level. Reviewed-by:
Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Hong-lu Cheng authored
[Description] Change to new interface for notifying OS of cursor support changes Reviewed-by:
Gang Chu <gang.chu@amd.com> Reviewed-by:
Jaina Han <jaina.han@amd.com> Reviewed-by:
Jun Lei <jun.lei@amd.com> Acked-by:
Hong-lu Cheng <hong-lu.cheng@amd.com> Tested-by:
-
Max Tseng authored
[Why] Allow dc report maximum display clock possible at vmin Reviewed-by:
Max Tseng <max.tseng@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along the following: - Fix incorrect odm change detection logic - Add primary pipe check when building slice table for dcn3x - Add get primary dpp pipe resource interface - Add missing function pointer for DCN321 resource - Rename DisableMinDispClkODM in dc_config - Break after finding supported vlevel for repopulate - Update OPP counter from new interface - Augment display clock in dc_cap structure - Improve code style on bios_parser2 - Skip audio config for virtual signal - Block MPO if it prevents pstate support - Fix DP2.0 timing sync - Improve x86 and dmub ips handshake - Remove guaranteed viewports limitation for odm - Add new windowed mpo odm minimal transition sequence - Reset stream slice count for new ODM policy - Determine fast update only before commit minimal transition state - Remove unused mmhub_reg_offsets Acked-by:
-
Wenjing Liu authored
[why] The current ODM change detection only compares first two ODM slices. If there are 4 ODM slices and the change is within the last two slices, the logic fails to detect ODM change and cause us to skip ODM programming unexpectedly. [how] Add a is ODM topology changed resource interface to check any ODM topology changes with a more generic method. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Wenjing Liu authored
[why] There is a corner use case where the same plane pointer can be added into dc state twice. In addition to plane state pointer check we also need to match primary pipe before identifying the same plane. Reviewed-by:
-
Wenjing Liu authored
[why] Need to have a helper function to find the primary dp pipe of the plane associated with a dpp pipe Reviewed-by:
-
Wenjing Liu authored
[why] acquire_free_pipe_as_secondary_opp_head function pointer is not assigned. This causes ODM mode to be disabled after enabling windowed MPO ODM capability on DCN321. [how] assign the correct function to the function pointer. Reviewed-by:
-
Gabe Teeger authored
[what and why] The logic for DisableMinDispClkODM is reversed now that odm is disabled by default. Renaming to EnableMinDispClkODM. Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Gabe Teeger <gabe.teeger@amd.com> Tested-by:
-
Lang Yu authored
Fix truncation warnings. Fixes: 9d4346bd ("drm/amdgpu: add VPE 6.1.0 support") Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202309200028.aUVuM8os-lkp@intel.comSigned-off-by:
-
Rodrigo Siqueira authored
bios_parser2 uses space instead of tabs in multiple areas; this commit converts those spaces into tabs. It also removes some other small details. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by:
-
Alex Hung authored
[WHY] edid_override and drm_edid_override_connector_update, according to drm documentation, should not be referred outside drm_edid. [HOW] Remove and replace them accordingly. This can tested by IGT's kms_hdmi_inject test. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
-
Hamza Mahfooz authored
For multi-GPU systems it is difficult to tell which GPU a particular message is being printed for and that is undesirable because it complicates debugging efforts. Also, the new macros allow us to enable logging for particular parts of the codebase more selectively (since we no longer need to throw everything at DRM_DEBUG_KMS()). So, for the reasons outlined above we should switch to the new macros. We can accomplish this by using the existing DC_LOGGER code to pass around the relevant `struct drm_device` which will be fed to the new macros in logger_types.h. Also, we must get rid of all instances of the DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use the DC logger there and we can simply refer to the macros directly there instead. Reviewed-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Alex Hung authored
[WHY & HOW] IGT's kms_hdmi_inject (subtest inject_audio) triggers a warning message from dce_aud_az_configure. This can be fixed by checking Virtual signal that does not need to configure AZ audio since it does not have any. Reviewed-by:
-
Ma Jun authored
Add reset option for fan_curve. User can use command "echo r > fan_cure" to reset the fan_curve to boot value Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Acked-by:
-
Dmytro Laktyushkin authored
This change adds a method to block mpo when it would cause us to exit pstate support. We should block mpo by default where MPO causes issues by preventing pstate change. Reviewed-by:
Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Tested-by:
-
Ilya Bakoulin authored
[Why] Triggering OTG sync before all OTG/HPO clock programming is complete causes timing sync to fail and a subsequent P-state hang. [How] Move DTB clock programming earlier in the sequence to enable_stream_timing. Reviewed-by:
Ariel Bernstein <eric.bernstein@amd.com> Acked-by:
Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by:
-
Duncan Ma authored
[Why] There is a race condition between x86 and dmcub fw when attempting to exit IPS2. Scenarios including exiting IPS2 before IPS2 has been entered. This can cause unexpected hang when DMCUB attempt to exit while PMFW still tries to enter IPS2. [How] A new design has been introduced to remove race conditions and improve the handshake between x86 and DMCUB. An AON scratch register is borrowed from PMFW to determine whether DMCUB has committed to IPS entry or not. In the case when dmcub has committed IPS entry, x86 must poll until an exit event occurred either from DMCUB(IPS1) or PMFW(IPS2). x86 will wait upperbound of evaluation and IPS entry time to ensure IPS2 exit event has been sent to PMFW. Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Tested-by:
-
Wenjing Liu authored
[why] With the more generic hw minimal state transition sequence, this limitation has been overcome. Reviewed-by:
-
Wenjing Liu authored
[why] We do not have a programming sequence to support seamless transition between MPC combine to ODM combine when plane count remains the same. This can happen with windowed MPO ODM use cases when plane scaling is changed over ODM Combine's capability. [How] We are adding a programming sequence specifically to handle the transition between MPC combine and ODM combine during plane scaling change. Reviewed-by:
-
Wenjing Liu authored
[why] ODM combine could prevent us from supporting more planes we will reset ODM slice count back to 1 when all planes have been removed to maximize the amount of planes supported when new planes are added. [how] reset ODM slice count when all planes are removed. Reviewed-by:
-
Wenjing Liu authored
[why] commit minimal transition state would update current state to new state with surface and stream update applied. If we determine fast update only after we have committed the minimal transition state based on new state, we will skip committing the full new state. [how] determine fast update only earlier based on the actaul currents state. Only skip full commit when the transition between actual current state and new state is fast update only. Reviewed-by:
-
Qingqing Zhuo authored
[Why & How] mmhub_reg_offsets never used in code. Remove it. Reviewed-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by:
-
Xiaogang Chen authored
This patch fixes: 1: ref number of prange's svm_bo got decreased by an async call from hmm. When wait svm_bo of prange got released we shoul also wait prang->svm_bo become NULL, otherwise prange->svm_bo may be set to null after allocate new vram buffer. 2: During waiting svm_bo of prange got released in a while loop should reschedule current task to give other tasks oppotunity to run, specially the the workque task that handles svm_bo ref release, otherwise we may enter to softlock. Signed-off-by:
Xiaogang.Chen <xiaogang.chen@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Philip Yang authored
Otherwise GPU may access the stale mapping and generate IOMMU IO_PAGE_FAULT. Move this to inside p->mutex to prevent multiple threads mapping and unmapping concurrently race condition. After kfd_mem_dmaunmap_attachment is removed from unmap_bo_from_gpuvm, kfd_mem_dmaunmap_attachment is called if failed to map to GPUs, and before free the mem attachment in case failed to unmap from GPUs. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Christian König authored
For the PASID flushing we already handled that at a higher layer, apply those workarounds to the standard flush as well. Signed-off-by:
-
Christian König authored
Instead of each implementation doing this more or less correctly move taking the reset lock at a higher level. v2: fix typo Signed-off-by:
-
Christian König authored
That function never fails, drop the error return. Signed-off-by:
-
Christian König authored
The same PASID can be used by more than one VMID, reset each of them. Use the common KIQ handling. Signed-off-by:
-
Christian König authored
The same PASID can be used by more than one VMID, reset each of them. Use the common KIQ handling. Signed-off-by:
-
