- 02 Oct, 2009 2 commits
-
-
Alexey Starikovskiy authored
EC may forget a command without sending any "reset" interrupt, thus we need to lessen the requirement for transaction restart. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14247Signed-off-by:
Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by:
Len Brown <len.brown@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix data space leak fix Btrfs: remove duplicates of filemap_ helpers Btrfs: take i_mutex before generic_write_checks Btrfs: fix arguments to btrfs_wait_on_page_writeback_range Btrfs: fix deadlock with free space handling and user transactions Btrfs: fix error cases for ioctl transactions Btrfs: Use CONFIG_BTRFS_POSIX_ACL to enable ACL code Btrfs: introduce missing kfree Btrfs: Fix setting umask when POSIX ACLs are not enabled Btrfs: proper -ENOSPC handling
-
- 01 Oct, 2009 38 commits
-
-
Uwe Kleine-König authored
spi_imx_chipselect() made things that should be (and mostly are) done by spi_imx_setupxfer. Only setting the tx and rx functions was missing. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Uwe Kleine-König authored
Otherwise the config function uses random data from the stack. This didn't stick out because config is called once more in the chipselect function with correct parameters. Signed-off-by:
-
Uwe Kleine-König authored
spi_imx_setup() is only called by spi_setup(). The latter does the initialization already. Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Sascha Hauer authored
We can only setup the gpio pins in spi_setup time when we know the SPI_CS_HIGH setting. Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Uwe Kleine-König authored
This makes the filename match the Kconfig symbol and the driver name. Signed-off-by:
-
Christoph Hellwig authored
It's just a wrapper for <linux/fscache.h>, so remove it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andy Spencer authored
When using %*s, sscanf should honor conversion specifiers immediately following the %*s. For example, the following code should find the position of the end of the string "hello". int end; char buf[] = "hello world"; sscanf(buf, "%*s%n", &end); printf("%d\n", end); Ideally, sscanf would advance the fmt and str pointers the same as it would without the *, but the code for that is rather complicated and is not included in the patch. Signed-off-by:Andy Spencer <andy753421@gmail.com> Acked-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Chuck Ebbert authored
Allow users to force skipping the TXEN test at init time. Applies to all serial ports. Intended for debugging only. There is a blacklist for devices where we need to skip the test but the list is not complete. This lets users force skipping the test so we can determine if they need to be added to the list. Some HP machines with weird serial consoles have this problem and there may be more. Signed-off-by:
Chuck Ebbert <cebbert@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Roel Kluin authored
Check whether index is within bounds before grabbing the element. Also, since NR_PORTS is defined ARRAY_SIZE(cy_port), cy_port[NR_PORTS] is out of bounds as well. [akpm@linux-foundation.org: cleanup, remove (long) casts] Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Roel Kluin authored
irq is declared with size NR_CARDS (4), but the loop containing this segment runs up until NR_ISA_ADDRS (16), possibly reading from irq[i] (and trying to use the result) Identified by the Parfait static scanner. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Breno Leitao authored
Convert spaces to tabs and remove wrong spaces Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <Scott.Kilau@digi.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Atsushi Nemoto authored
Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Ben Dooks authored
Add better support for omitting either the card detect or the write protect GPIOs if the board does not support it. Add the fields no_wprotect and no_detect to the platform data which when set indicate the absence of the respective GPIOs. Note, this also fixes a minor bug where it tries to free IRQ0 if there is no detect gpio available. Signed-off-by:
Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Ben Dooks authored
We have found a couple of boards where the SDIO IRQ hardware support has failed to work properly, and thus we should make it configurable whether or not to be included in the driver. Signed-off-by:
-
Ben Dooks authored
Fixes for the DMA transfer mode of the driver to try and improve the state of the code: - Ensure that dma_complete is set during the end of the command phase so that transfers do not stall awaiting the completion - Update the DMA debugging to provide a bit more useful information such as how many DMA descriptors where not processed and print the DMA addresses in hexadecimal. - Fix the DMA channel request code to actually request DMA for the S3CMCI block instead of whatever '0' signified. - Add fallback to PIO if we cannot get the DMA channel, as many of the devices with this block only have a limited number of DMA channels. - Only try and claim and free the DMA channel if we are trying to use it. This improves the driver DMA code to the point where it can now identify a card and read the partition table. However the DMA can still stall when trying to move data between the host and memory. Signed-off-by:
-
Ben Dooks authored
Add a selection for the data transfer mode of the s3cmci driver, allowing for either a configuration or rumtime selection of the use of the DMA or PIO transfer code. The PIO only mode is 476 bytes smaller than the driver with both methods compiled in. Signed-off-by:
-
Ben Dooks authored
The controller supports SDIO IRQ detection so add support for hardware assisted SDIO interrupt detection for the SDIO core. This improves the response time for SDIO interrupts and thus the transfer rate from devices such as the Marvel 8686. As a note, it does seem that the controller will miss an IRQ than is held asserted, so there are some manual checks to see if the SDIO interrupt is active after a transfer. Major testing on the S3C2440. Signed-off-by:
-
Ben Dooks authored
Export driver state and hardware register state via debugfs entries created under a directory formed from dev_name() on the probed device when CONFIG_DEBUG_FS is set. Signed-off-by:
-
Ben Dooks authored
The clear_imask() call should be used to clear the interrupt mask register, as it may end up clearing the SDIO interrupt bit if this is enabled. Change all writes of zero to SDIIMSK register to use clear_imask() ready for the SDIO updates. Signed-off-by:
-
Ben Dooks authored
Move to using dev_pm_ops for suspend and resume. Signed-off-by:
-
Ben Dooks authored
Move to using gpiolib to access the card detect and write protect GPIO lines instead of using the platform speicifc s3c2410_gpio calls. Also ensure that the card lines are claimed the same way to avoid overlap with any other drivers. Signed-off-by:
-
Ben Dooks authored
Use the platform id list to match the three different versions of the hardware block that this driver supports. This will change the prefix of the console messages produced by this driver to be prefixed by s3c-mci instead of the hardware block name, such as s3c2440-mci. Signed-off-by:
-
Ben Dooks authored
Replace the local definition RESSIZE() with the standard resource_size() call for getting the size of a struct resource. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
In charge/uncharge/reclaim path, usage_in_excess is calculated repeatedly and it takes res_counter's spin_lock every time. This patch removes unnecessary calls for res_count_soft_limit_excess. Reviewed-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: -
KAMEZAWA Hiroyuki authored
__css_put() doesn't check a bug as refcnt goes to minus. I think it should be caught. This patch adds a check for it. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
__mem_cgroup_largest_soft_limit_node() returns a mem_cgroup_per_zone "mz" with incremnted mz->mem->css's refcnt. Then, the caller of this function has to call css_put(mz->mem->css). But, mz can be !NULL even if "not found" i.e. without css_get(). By this, css->refcnt will go down to minus. This may cause various things...one of results will be initite-loop in css_tryget() as this. INFO: RCU detected CPU 0 stall (t=10000 jiffies) sending NMI to all CPUs: NMI backtrace for cpu 0 CPU 0: <snip> <<EOE>> <IRQ> [<ffffffff810884bd>] trace_hardirqs_off+0xd/0x10 [<ffffffff8102a940>] flat_send_IPI_mask+0x90/0xb0 [<ffffffff8102a9c9>] flat_send_IPI_all+0x69/0x70 [<ffffffff81027372>] arch_trigger_all_cpu_backtrace+0x62/0xa0 [<ffffffff810bff8e>] __rcu_pending+0x7e/0x370 [<ffffffff810c02c7>] rcu_check_callbacks+0x47/0x130 [<ffffffff81063a26>] update_process_times+0x46/0x70 [<ffffffff81085930>] tick_sched_timer+0x60/0x160 [<ffffffff810858d0>] ? tick_sched_timer+0x0/0x160 [<ffffffff8107a03a>] __run_hrtimer+0xba/0x150 [<ffffffff8107a325>] hrtimer_interrupt+0xd5/0x1b0 [<ffffffff81426dfe>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8142cacd>] smp_apic_timer_interrupt+0x6d/0x9b [<ffffffff8100cb33>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff811317b6>] ? mem_cgroup_walk_tree+0x156/0x180 [<ffffffff811316d3>] ? mem_cgroup_walk_tree+0x73/0x180 [<ffffffff81131692>] ? mem_cgroup_walk_tree+0x32/0x180 [<ffffffff81131a00>] ? mem_cgroup_get_local_stat+0x0/0x110 [<ffffffff81131d5b>] ? mem_control_stat_show+0x14b/0x330 [<ffffffff810a57fd>] ? cgroup_seqfile_show+0x3d/0x60 Above shows CPU0 caught in css_tryget()'s inifinite loop because of bad refcnt. This is a fix to set mz=NULL at the top of retry path. Signed-off-by:
Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by:
-
Richard Röjfors authored
Some configurations of the Timberdale FPGA has the uartlite included. Signed-off-by:
Richard Röjfors <richard.rojfors@mocean-labs.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Randy Dunlap authored
This patch size comment is like so last millenium. Update it to modern times. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Albert Herranz authored
Some manufacturers provide vendor information in non-vendor specific CIS tuples. For example, Broadcom uses an Extended Function tuple to provide the MAC address on some of their network cards, as in the case of the Nintendo Wii WLAN daughter card. This patch allows passing whitelisted FUNCE tuples unknown to the SDIO core to a matching SDIO driver instead of rejecting them and failing. Signed-off-by:
Albert Herranz <albert_herranz@yahoo.es> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Huang Shijie authored
The page_address_in_vma() is not only used in unuse_vma(). Signed-off-by:
Huang Shijie <shijie8@gmail.com> Acked-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by:
-
Samuel Thibault authored
Just like ip_fast_csum, the assembly snippet in csum_ipv6_magic needs a memory clobber, as it is only passed the address of the buffer, not a memory reference to the buffer itself. This caused failures in Hurd's pfinetv4 when we tried to compile it with gcc-4.3 (bogus checksums). Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by:
"David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@kernel.org> Signed-off-by:
-
Mark Salter authored
Fix some build failures when using gcc-4.x for MN10300. Firstly, __get_user() fails to build because the pointer points to a const and __gu_val ends up being read-only: In file included from include/linux/mempolicy.h:62, from init/main.c:50: include/linux/pagemap.h: In function 'fault_in_pages_readable': include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output make[1]: *** [init/main.o] Error 1 Secondly, gcc-4 doesn't allow casts of lvalues: UPD include/linux/compile.h arch/mn10300/kernel/rtc.c: In function 'calibrate_clock': arch/mn10300/kernel/rtc.c:170: error: lvalue required as left operand of assignment arch/mn10300/kernel/rtc.c:172: error: lvalue required as left operand of assignment make[1]: *** [arch/mn10300/kernel/rtc.o] Error 1 These are seen with gcc 4.2.1. Signed-off-by:Mark Salter <msalter@redhat.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Marek Vasut <marek.vasut@gmail.com> Acked-by:
Tomas Cech <sleep_walker@suse.cz> Signed-off-by:
-
Jiri Slaby authored
Stanse found (again) a BKL imbalance in vt_ioctl. It's easily triggerable by ioctl(dev_tty_fd, VT_SETACTIVATE, NULL); Introduced by commit d3b5cffc Author: Alan Cox <alan@linux.intel.com> Date: Sat Sep 19 13:13:26 2009 -0700 vt: add an activate and lock Signed-off-by:
-
Andrew Morton authored
Revert 45d80eea ("m68k: convert to asm-generic/hardirq.h") - it fails to compile due to an inclusion tangle: In file included from include/linux/irq.h:12, from include/asm-generic/hardirq.h:6, from /usr/src/devel/arch/m68k/include/asm/hardirq_mm.h:6, from /usr/src/devel/arch/m68k/include/asm/hardirq.h:4, from include/linux/hardirq.h:10, from /usr/src/devel/arch/m68k/include/asm/system_mm.h:69, from /usr/src/devel/arch/m68k/include/asm/system.h:4, from include/linux/list.h:7, from include/linux/preempt.h:11, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:56, from arch/m68k/kernel/asm-offsets.c:14: include/linux/smp.h:17: error: field 'list' has incomplete type Cc: Christoph Hellwig <hch@lst.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
