- 05 Mar, 2014 6 commits
-
-
Andrii.Tseglytskyi authored
Add ABB device nodes for OMAP443x family of devices. abb_iva is populated, but disabled as it is not used on current OMAP443x family, but the node is used on OMAP446x family. Data is based on OMAP443x Technical Reference Manual revision AN (April 2013). ABB device nodes for OMAP4460 device Data is based on OMAP4460 Technical Reference Manual revision Z (April 2013) [nm@ti.com: co-developer] Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Andrii.Tseglytskyi authored
Add ABB device node for OMAP36xx family of devices. Data is based on OMAP36XX Technical Reference Manual revision AB (Dec 2012). [nm@ti.com: co-developer] Signed-off-by:
-
Balaji T K authored
Add card detect gpio for SD card slot and include dt gpio header. Signed-off-by:
Balaji T K <balajitk@ti.com> Signed-off-by:
-
Balaji T K authored
Add card detect gpio for SD card slot Signed-off-by:
-
Balaji T K authored
enable sd card slot on am437x-gp-evm Signed-off-by:
-
Kishon Vijay Abraham I authored
Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt and Documentation/devicetree/bindings/phy/ti-phy.txt. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
- 04 Mar, 2014 5 commits
-
-
Imre Kaloz authored
Enable the WiLink6 connected to mmc2. Signed-off-by: Imre Kaloz <kaloz@openwrt.org Signed-off-by: -
Roger Quadros authored
Remove non-compatible id from examples. CC: Alan Stern <stern@rowland.harvard.edu> CC: Nishant Menon <nm@ti.com> CC: Kevin Hilman <khilman@linaro.org> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Roger Quadros authored
The OMAP EHCI and OHCI controllers are not compatible with drivers other than "ti,ehci-omap" and "ti,ohci-omap3" respectively, so get rid of the incompatible ids. CC: Alan Stern <stern@rowland.harvard.edu> CC: Nishant Menon <nm@ti.com> CC: Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Roger Quadros authored
The necessary clock phandle for the EHCI clock is now provided via device tree so we no longer need this legacy method. Update the omap4-panda and omap5-uevm board DTS to provide the necessary EHCI PHY clock information. Signed-off-by:
-
Florian Vaussard authored
Gumstix DuoVero is an OMAP4430-based Computer On Module. Parlor is one of the available expansion board. Tested features: - GPMC ethernet - HSUSB2 and OTG - Audio out - WiFi and Bluetooth (w2cbw0015 SDIO module) - LED and button Signed-off-by:
Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by:
-
- 02 Mar, 2014 29 commits
-
-
Tony Lindgren authored
Merge tag 'for_3.15/dts_signed' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt Add craneboard devices Add more N900 devices Add am43x-epos-evm and am437x-gp-evm devices Add OMAP4 DMM devices Conflicts: arch/arm/boot/dts/am43x-epos-evm.dts arch/arm/boot/dts/dra7.dtsi
-
Archit Taneja authored
Add Dynamic Memory Manager (DMM) bindings for OMAP4 and OMAP5 and DRA7x devices. DMM only requires address and irq information. Add documentation for the DMM bindings. Originally worked on by Andy Gross <andygro@gmail.com> Cc: Andy Gross <andygro@gmail.com> Signed-off-by:
Archit Taneja <archit@ti.com> Signed-off-by:
Benoit Cousson <bcousson@baylibre.com>
-
Sourav Poddar authored
Add gpio keys node for am43x gp evm. Signed-off-by:
Sourav Poddar <sourav.poddar@ti.com> Signed-off-by:
-
Pekon Gupta authored
This patch: - enables GPMC h/w and ELM h/w engine for AM43xx devices (am4372.dtsi) - adds pinmux and DT node for Micron 4K-paged x8 NAND device (MT29F4G08AB) present on following boards: am43x-epos-evm: On this board, NAND Flash control lines are muxed with QSPI, Thus only one of the two can be used at a time. Selection is controlled by: (a) dynamically driving following GPIO pin from software GPMC_A0(GPIO) == 0 NAND is selected (default) GPMC_A0(GPIO) == 1 eMMC is selected Signed-off-by:Pekon Gupta <pekon@ti.com> Signed-off-by:
-
Pekon Gupta authored
This patch updated MTD/NAND DT node binding to replace deprecated bindings as per following commit. commit ac65caf5 ARM: OMAP2+: cleaned-up DT support of various ECC schemes Also Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt Reviewed-by:Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Pekon Gupta authored
This patch has following updates, specific to MTD/NAND DT - update MTD NAND partition table to keep compatibility between different boards and mainline u-boot. - prefix 'NAND.' in names of NAND device MTD partitions to differentiate them from other MTD device partitions (like NOR and QSPI) Partition_Name Partition_Size /dev/mtd0 NAND.SPL 1 block-size* /dev/mtd1 NAND.SPL.backup1 1 block-size* /dev/mtd2 NAND.SPL.backup2 1 block-size* /dev/mtd3 NAND.SPL.backup3 1 block-size* /dev/mtd5 NAND.u-boot-spl-os 2 block-size* [for falcon boot] /dev/mtd4 NAND.u-boot 1 MB /dev/mtd6 NAND.u-boot-env 1 block-size* /dev/mtd7 NAND.u-boot-env.backup1 1 block-size* /dev/mtd8 NAND.kernel till 0xA00000 /dev/mtd9 NAND.file-system till end of device * am335x-evm uses NAND device with block-size=128KiB Signed-off-by: -
Pekon Gupta authored
This patch - refactors gpmc_hwecc_bch_capable() - add checks for new platforms like dra7xx, am43xx - add checks for OMAP3 SoC, w.r.t. new ECC schemes spawned in following commit: commit ac65caf5 ARM: OMAP2+: cleaned-up DT support of various ECC schemes Signed-off-by: -
NeilBrown authored
Add node for bma180 driver. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
This requires vaux4. Reset line isn't used yet, so wifi isn't reliable. But it does work once per boot. Signed-off-by:
Marek Belisko <marek@goldelico.com> Signed-off-by:
-
NeilBrown authored
This adds basic sound support for gta04 board. Signed-off-by:
-
NeilBrown authored
Define twl4030 charger node used for charging. Signed-off-by:
-
Marek Belisko authored
Gta04 using tcs2007 touchscreen. Add support for that. Signed-off-by:
-
NeilBrown authored
Add magnetometer hmc5843 node. Signed-off-by:
-
Sourav Poddar authored
Enable gpio3, gpio4, it will be used by gpio matrix keys. Also, can be used by othe peripherals. Signed-off-by:
-
Sourav Poddar authored
Add pwm backlight support for gp evm. Signed-off-by:
-
Lokesh Vutla authored
AM437x GP EVM DTS with pinmux information to make I2C on EVM usable. Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Afzal Mohammed <afzal@ti.com> Signed-off-by:
-
Sourav Poddar authored
Add SPI dts data. Signed-off-by:
-
Sourav Poddar authored
Add I2C2 dts data. Signed-off-by:
-
Darren Etheridge authored
AM43xx devices have an extra MUX_MODE for certain pins. Updating dt include to have MUX_MODE8 which maps to 0x8. Signed-off-by:
Darren Etheridge <detheridge@ti.com> Signed-off-by:
-
Sourav Poddar authored
Add pwm backlight support for am43x epos evm. Signed-off-by:
-
Sourav Poddar authored
Add "pwm-cells" node for all ecap, ehrpwm in am43x dtsi files. Signed-off-by:
-
Sebastian Reichel authored
This adds support for the bq24150a chip to the Nokia N900 DTS file. Signed-off-by:
Sebastian Reichel <sre@debian.org> Signed-off-by:
-
Sebastian Reichel authored
This adds support for the isp1704 chip to the Nokia N900 DTS file. Signed-off-by:
-
Sebastian Reichel authored
This adds support for the N900's headphone amplifier to the N900 DTS file. Signed-off-by:
-
Sebastian Reichel authored
Add support for tsl2563 light sensor to the Nokia N900. Signed-off-by:
-
Sebastian Reichel authored
Add Keyboard Matrix information to N900's DTS file. This patch maps the keys exactly as the original board code. Signed-off-by:
-
Sebastian Reichel authored
Add keypad node to twl4030, so that board DTS files can just add the keymap. Signed-off-by:
-
Nishanth Menon authored
MMC 8 bit mode operation depends on dip switch setting which is not obvious - The current board file has this description. However, with removal of the board file in the future, this information will be lost and has to be rediscovered. Signed-off-by:
-
Nishanth Menon authored
Craneboard is a hardware development platform based on the Sitara AM3517 ARM Cortex - A8 microprocessor device - see [1] for more details. Add basic devices for craneboard as replacement for the board file scheduled for removal as part of device tree conversion [1] http://craneboard.orgSigned-off-by:
-
