Jason Xing says:

====================
tcp/mptcp: count CLOSE-WAIT for CurrEstab

Taking CLOSE-WAIT sockets into CurrEstab counters is in accordance with RFC
1213, as suggested by Eric and Neal.

v5
Link: https://lore.kernel.org/all/20240531091753.75930-1-kerneljasonxing@gmail.com/
1. add more detailed comment (Matthieu)

v4
Link: https://lore.kernel.org/all/20240530131308.59737-1-kerneljasonxing@gmail.com/
1. correct the Fixes: tag in patch [2/2]. (Eric)

Previous discussion
Link: https://lore.kernel.org/all/20240529033104.33882-1-kerneljasonxing@gmail.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Like previous patch does in TCP, we need to adhere to RFC 1213:

  "tcpCurrEstab OBJECT-TYPE
   ...
   The number of TCP connections for which the current state
   is either ESTABLISHED or CLOSE- WAIT."

So let's consider CLOSE-WAIT sockets.

The logic of counting
When we increment the counter?
a) Only if we change the state to ESTABLISHED.

When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.

Fixes: d9cd27b8 ("mptcp: add CurrEstab MIB counter support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to RFC 1213, we should also take CLOSE-WAIT sockets into
consideration:

  "tcpCurrEstab OBJECT-TYPE
   ...
   The number of TCP connections for which the current state
   is either ESTABLISHED or CLOSE- WAIT."

After this, CurrEstab counter will display the total number of
ESTABLISHED and CLOSE-WAIT sockets.

The logic of counting
When we increment the counter?
a) if we change the state to ESTABLISHED.
b) if we change the state from SYN-RECEIVED to CLOSE-WAIT.

When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.

Please note: there are two chances that old state of socket can be changed
to CLOSE-WAIT in tcp_fin(). One is SYN-RECV, the other is ESTABLISHED.
So we have to take care of the former case.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hsr_redbox.sh test need to create bridge for testing. Add the missing
config CONFIG_BRIDGE in config file.

Fixes: eafbf057 ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f58f45c1 ("vxlan: drop packets from invalid src-address")
has recently been added to vxlan mainly in the context of source
address snooping/learning so that when it is enabled, an entry in the
FDB is not being created for an invalid address for the corresponding
tunnel endpoint.

Before commit f58f45c1 vxlan was similarly behaving as geneve in
that it passed through whichever macs were set in the L2 header. It
turns out that this change in behavior breaks setups, for example,
Cilium with netkit in L3 mode for Pods as well as tunnel mode has been
passing before the change in f58f45c1 for both vxlan and geneve.
After mentioned change it is only passing for geneve as in case of
vxlan packets are dropped due to vxlan_set_mac() returning false as
source and destination macs are zero which for E/W traffic via tunnel
is totally fine.

Fix it by only opting into the is_valid_ether_addr() check in
vxlan_set_mac() when in fact source address snooping/learning is
actually enabled in vxlan. This is done by moving the check into
vxlan_snoop(). With this change, the Cilium connectivity test suite
passes again for both tunnel flavors.

Fixes: f58f45c1 ("vxlan: drop packets from invalid src-address")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Bauer <mail@david-bauer.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

q->bands will be assigned to qopt->bands to execute subsequent code logic
after kmalloc. So the old q->bands should not be used in kmalloc.
Otherwise, an out-of-bounds write will occur.

Fixes: c2999f7f ("net: sched: multiq: don't call qdisc_put() while holding tree lock")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the XDP_TX path, ionic driver sends a packet to the TX path with rx
page and corresponding dma address.
After tx is done, ionic_tx_clean() frees that page.
But RX ring buffer isn't reset to NULL.
So, it uses a freed page, which causes kernel panic.

BUG: unable to handle page fault for address: ffff8881576c110c
PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060
Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8
RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283
RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002
RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e
RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8
R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100
FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x254/0x790
? __pfx_page_fault_oops+0x10/0x10
? __pfx_is_prefetch.constprop.0+0x10/0x10
? search_bpf_extables+0x165/0x260
? fixup_exception+0x4a/0x970
? exc_page_fault+0xcb/0xe0
? asm_exc_page_fault+0x22/0x30
? 0xffffffffc0051f64
? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
? do_raw_spin_unlock+0x54/0x220
ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
__napi_poll.constprop.0+0xa0/0x440
net_rx_action+0x7e7/0xc30
? __pfx_net_rx_action+0x10/0x10

Fixes: 8eeed837 ("ionic: Add XDP_TX support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata.  This worked in 5.0 kernel but not in newer kernels.  The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning.  This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.

Fixes: 232ba3a5 ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf
to sysctl_tcp_wmem[1], since this may overwrite the value set by
tcp_sndbuf_expand() in TCP connection establishment.

And the other setting sk_{snd|rcv}buf to sysctl value in
smc_adjust_sock_bufsizes() can also be omitted since the initialization
of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem
or ipv4_sysctl_tcp_{w|r}mem[1].

Fixes: 30c3c4a4 ("net/smc: Use correct buffer sizes when switching between TCP and SMC")
Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.comSigned-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too.
Signed-off-by: David S. Miller <davem@davemloft.net>

PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.

Fixes: 7df5b4b2 ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For TLS offload we mark packets with skb->decrypted to make sure
they don't escape the host without getting encrypted first.
The crypto state lives in the socket, so it may get detached
by a call to skb_orphan(). As a safety check - the egress path
drops all packets with skb->decrypted and no "crypto-safe" socket.

The skb marking was added to sendpage only (and not sendmsg),
because tls_device injected data into the TCP stack using sendpage.
This special case was missed when sendpage got folded into sendmsg.

Fixes: c5c37af6 ("tcp: Convert do_tcp_sendpages() to use MSG_SPLICE_PAGES")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240530232607.82686-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Kalle Valo says:

====================
wireless fixes for v6.10-rc3

The first fixes for v6.10. And we have a big one, I suspect the
biggest wireless pull request we ever had. There are fixes all over,
both in stack and drivers. Likely the most important here are mt76 not
working on mt7615 devices, ath11k not being able to connect to 6 GHz
networks and rtlwifi suffering from packet loss. But of course there's
much more.

* tag 'wireless-2024-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (37 commits)
  wifi: rtlwifi: Ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
  wifi: mt76: mt7615: add missing chanctx ops
  wifi: wilc1000: document SRCU usage instead of SRCU
  Revert "wifi: wilc1000: set atomic flag on kmemdup in srcu critical section"
  Revert "wifi: wilc1000: convert list management to RCU"
  wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan()
  wifi: mac80211: correctly parse Spatial Reuse Parameter Set element
  wifi: mac80211: fix Spatial Reuse element size check
  wifi: iwlwifi: mvm: don't read past the mfuart notifcation
  wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkill
  wifi: iwlwifi: mvm: check n_ssids before accessing the ssids
  wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe option
  wifi: iwlwifi: mvm: handle BA session teardown in RF-kill
  wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmd
  wifi: iwlwifi: mvm: remove stale STA link data during restart
  wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdef
  wifi: iwlwifi: mvm: set properly mac header
  wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64
  wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookup
  wifi: iwlwifi: mvm: fix a crash on 7265
  ...
====================

Link: https://lore.kernel.org/r/20240603115129.9494CC2BD10@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/test_rhashtable.o

Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240531-md-lib-test_rhashtable-v1-1-cd6d4138f1b6@quicinc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
dst_cache: fix possible races

This series is inspired by various undisclosed syzbot
reports hinting at corruptions in dst_cache structures.

It seems at least four users of dst_cache are racy against
BH reentrancy.

Last patch is adding a DEBUG_NET check to catch future misuses.
====================

Link: https://lore.kernel.org/r/20240531132636.2637995-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After fixing four different bugs involving dst_cache
users, it might be worth adding a check about BH being
blocked by dst_cache callers.

DEBUG_NET_WARN_ON_ONCE(!in_softirq());

It is not fatal, if we missed valid case where no
BH deadlock is to be feared, we might change this.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-6-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As explained in commit 13788174 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.

ila_output() is called from lwtunnel_output()
possibly from process context, and under rcu_read_lock().

We might be interrupted by a softirq, re-enter ila_output()
and corrupt dst_cache data structures.

Fix the race by using local_bh_disable().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-5-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As explained in commit 13788174 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.

Disabling preemption in seg6_output_core() is not good enough,
because seg6_output_core() is called from process context,
lwtunnel_output() only uses rcu_read_lock().

We might be interrupted by a softirq, re-enter seg6_output_core()
and corrupt dst_cache data structures.

Fix the race by using local_bh_disable() instead of
preempt_disable().

Apply a similar change in seg6_input_core().

Fixes: fa79581e ("ipv6: sr: fix several BUGs when preemption is enabled")
Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Lebrun <dlebrun@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-4-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As explained in commit 13788174 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.

Disabling preemption in rpl_output() is not good enough,
because rpl_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().

We might be interrupted by a softirq, re-enter rpl_output()
and corrupt dst_cache data structures.

Fix the race by using local_bh_disable() instead of
preempt_disable().

Apply a similar change in rpl_input().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-3-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As explained in commit 13788174 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.

Disabling preemption in ioam6_output() is not good enough,
because ioam6_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().

We might be interrupted by a softirq, re-enter ioam6_output()
and corrupt dst_cache data structures.

Fix the race by using local_bh_disable() instead of
preempt_disable().

Fixes: 8cb3bf8b ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Justin Iurman <justin.iurman@uliege.be>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-2-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When vmxnet3_rq_create() fails to allocate memory for rq->data_ring.base,
the subsequent call to vmxnet3_rq_destroy_all_rxdataring does not reset
rq->data_ring.desc_size for the data ring that failed, which presumably
causes the hypervisor to reference it on packet reception.

To fix this bug, rq->data_ring.desc_size needs to be set to 0 to tell
the hypervisor to disable this feature.

[   95.436876] kernel BUG at net/core/skbuff.c:207!
[   95.439074] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[   95.440411] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.9.3-dirty #1
[   95.441558] Hardware name: VMware, Inc. VMware Virtual
Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018
[   95.443481] RIP: 0010:skb_panic+0x4d/0x4f
[   95.444404] Code: 4f 70 50 8b 87 c0 00 00 00 50 8b 87 bc 00 00 00 50
ff b7 d0 00 00 00 4c 8b 8f c8 00 00 00 48 c7 c7 68 e8 be 9f e8 63 58 f9
ff <0f> 0b 48 8b 14 24 48 c7 c1 d0 73 65 9f e8 a1 ff ff ff 48 8b 14 24
[   95.447684] RSP: 0018:ffffa13340274dd0 EFLAGS: 00010246
[   95.448762] RAX: 0000000000000089 RBX: ffff8fbbc72b02d0 RCX: 000000000000083f
[   95.450148] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f
[   95.451520] RBP: 000000000000002d R08: 0000000000000000 R09: ffffa13340274c60
[   95.452886] R10: ffffffffa04ed468 R11: 0000000000000002 R12: 0000000000000000
[   95.454293] R13: ffff8fbbdab3c2d0 R14: ffff8fbbdbd829e0 R15: ffff8fbbdbd809e0
[   95.455682] FS:  0000000000000000(0000) GS:ffff8fbeefd80000(0000) knlGS:0000000000000000
[   95.457178] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   95.458340] CR2: 00007fd0d1f650c8 CR3: 0000000115f28000 CR4: 00000000000406f0
[   95.459791] Call Trace:
[   95.460515]  <IRQ>
[   95.461180]  ? __die_body.cold+0x19/0x27
[   95.462150]  ? die+0x2e/0x50
[   95.462976]  ? do_trap+0xca/0x110
[   95.463973]  ? do_error_trap+0x6a/0x90
[   95.464966]  ? skb_panic+0x4d/0x4f
[   95.465901]  ? exc_invalid_op+0x50/0x70
[   95.466849]  ? skb_panic+0x4d/0x4f
[   95.467718]  ? asm_exc_invalid_op+0x1a/0x20
[   95.468758]  ? skb_panic+0x4d/0x4f
[   95.469655]  skb_put.cold+0x10/0x10
[   95.470573]  vmxnet3_rq_rx_complete+0x862/0x11e0 [vmxnet3]
[   95.471853]  vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3]
[   95.473185]  __napi_poll+0x2b/0x160
[   95.474145]  net_rx_action+0x2c6/0x3b0
[   95.475115]  handle_softirqs+0xe7/0x2a0
[   95.476122]  __irq_exit_rcu+0x97/0xb0
[   95.477109]  common_interrupt+0x85/0xa0
[   95.478102]  </IRQ>
[   95.478846]  <TASK>
[   95.479603]  asm_common_interrupt+0x26/0x40
[   95.480657] RIP: 0010:pv_native_safe_halt+0xf/0x20
[   95.481801] Code: 22 d7 e9 54 87 01 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d 93 ba 3b 00 fb f4 <e9> 2c 87 01 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90
[   95.485563] RSP: 0018:ffffa133400ffe58 EFLAGS: 00000246
[   95.486882] RAX: 0000000000004000 RBX: ffff8fbbc1d14064 RCX: 0000000000000000
[   95.488477] RDX: ffff8fbeefd80000 RSI: ffff8fbbc1d14000 RDI: 0000000000000001
[   95.490067] RBP: ffff8fbbc1d14064 R08: ffffffffa0652260 R09: 00000000000010d3
[   95.491683] R10: 0000000000000018 R11: ffff8fbeefdb4764 R12: ffffffffa0652260
[   95.493389] R13: ffffffffa06522e0 R14: 0000000000000001 R15: 0000000000000000
[   95.495035]  acpi_safe_halt+0x14/0x20
[   95.496127]  acpi_idle_do_entry+0x2f/0x50
[   95.497221]  acpi_idle_enter+0x7f/0xd0
[   95.498272]  cpuidle_enter_state+0x81/0x420
[   95.499375]  cpuidle_enter+0x2d/0x40
[   95.500400]  do_idle+0x1e5/0x240
[   95.501385]  cpu_startup_entry+0x29/0x30
[   95.502422]  start_secondary+0x11c/0x140
[   95.503454]  common_startup_64+0x13e/0x141
[   95.504466]  </TASK>
[   95.505197] Modules linked in: nft_fib_inet nft_fib_ipv4
nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6
nf_defrag_ipv4 rfkill ip_set nf_tables vsock_loopback
vmw_vsock_virtio_transport_common qrtr vmw_vsock_vmci_transport vsock
sunrpc binfmt_misc pktcdvd vmw_balloon pcspkr vmw_vmci i2c_piix4 joydev
loop dm_multipath nfnetlink zram crct10dif_pclmul crc32_pclmul vmwgfx
crc32c_intel polyval_clmulni polyval_generic ghash_clmulni_intel
sha512_ssse3 sha256_ssse3 vmxnet3 sha1_ssse3 drm_ttm_helper vmw_pvscsi
ttm ata_generic pata_acpi serio_raw scsi_dh_rdac scsi_dh_emc
scsi_dh_alua ip6_tables ip_tables fuse
[   95.516536] ---[ end trace 0000000000000000 ]---

Fixes: 6f483338 ("net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()")
Signed-off-by: Matthias Stocker <mstocker@barracuda.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://lore.kernel.org/r/20240531103711.101961-1-mstocker@barracuda.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the PHY is powered up after powered down most of the registers are
reset, so the PHY setup code needs to be done again.  In addition the
interrupt register will need to be setup again so that link status
indication works again.

Fixes: 26dd2974 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP_CLOSE may or may not have current/rnext keys and should not be
considered "established". The fast-path for TCP_CLOSE is
SKB_DROP_REASON_TCP_CLOSE. This is what tcp_rcv_state_process() does
anyways. Add an early drop path to not spend any time verifying
segment signatures for sockets in TCP_CLOSE state.

Cc: stable@vger.kernel.org # v6.7
Fixes: 0a3a8090 ("net/tcp: Verify inbound TCP-AO signed segments")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240529-tcp_ao-sk_state-v1-1-d69b5d323c52@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently NCSI driver will send several NCSI commands back to back without
waiting the response of previous NCSI command or timeout in some state
when NIC have multi channel. This operation against the single thread
manner defined by NCSI SPEC(section 6.3.2.3 in DSP0222_1.1.1)

According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should probe
one channel at a time by sending NCSI commands (Clear initial state, Get
version ID, Get capabilities...), than repeat this steps until the max
number of channels which we got from NCSI command (Get capabilities) has
been probed.

Fixes: e6f44ed6 ("net/ncsi: Package and channel management")
Signed-off-by: DelphineCCChiu <delphine_cc_chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20240529065856.825241-1-delphine_cc_chiu@wiwynn.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

John Sperbeck reported that if we turn off CONFIG_RFS_ACCEL, the 'head'
is not defined, which will trigger compile error. So I move the 'head'
out of the CONFIG_RFS_ACCEL scope.

Fixes: 84b6823c ("net: rps: protect last_qtail with rps_input_queue_tail_save() helper")
Reported-by: John Sperbeck <jsperbeck@google.com>
Closes: https://lore.kernel.org/all/20240529203421.2432481-1-jsperbeck@google.com/Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240530032717.57787-1-kerneljasonxing@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The object "ax25_dev" is managed by reference counting. Thus it should
not be directly released by kfree(), replace with ax25_dev_put().

Fixes: d01ffb9e ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240530051733.11416-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When releasing a socket in ax25_release(), we call netdev_put() to
decrease the refcount on the associated ax.25 device. However, the
execution path for accepting an incoming connection never calls
netdev_hold(). This imbalance leads to refcount errors, and ultimately
to kernel crashes.

A typical call trace for the above situation will start with one of the
following errors:

    refcount_t: decrement hit 0; leaking memory.
    refcount_t: underflow; use-after-free.

And will then have a trace like:

    Call Trace:
    <TASK>
    ? show_regs+0x64/0x70
    ? __warn+0x83/0x120
    ? refcount_warn_saturate+0xb2/0x100
    ? report_bug+0x158/0x190
    ? prb_read_valid+0x20/0x30
    ? handle_bug+0x3e/0x70
    ? exc_invalid_op+0x1c/0x70
    ? asm_exc_invalid_op+0x1f/0x30
    ? refcount_warn_saturate+0xb2/0x100
    ? refcount_warn_saturate+0xb2/0x100
    ax25_release+0x2ad/0x360
    __sock_release+0x35/0xa0
    sock_close+0x19/0x20
    [...]

On reboot (or any attempt to remove the interface), the kernel gets
stuck in an infinite loop:

    unregister_netdevice: waiting for ax0 to become free. Usage count = 0

This patch corrects these issues by ensuring that we call netdev_hold()
and ax25_dev_hold() for new connections in ax25_accept(). This makes the
logic leading to ax25_accept() match the logic for ax25_bind(): in both
cases we increment the refcount, which is ultimately decremented in
ax25_release().

Fixes: 9fd75b66 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
Signed-off-by: Lars Kellogg-Stedman <lars@oddbit.com>
Tested-by: Duoming Zhou <duoming@zju.edu.cn>
Tested-by: Dan Cross <crossd@gmail.com>
Tested-by: Chris Maness <christopher.maness@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240529210242.3346844-2-lars@oddbit.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Heng Qi says:

====================
virtio_net: fix lock warning and unrecoverable state

Patch 1 describes and fixes an issue where dim cannot return to
normal state in certain scenarios.

Patch 2 attempts to resolve lockdep's complaints that holding many
nested locks.
====================

Link: https://lore.kernel.org/r/20240528134116.117426-1-hengqi@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the following snippet is run, lockdep will report a deadlock[1].

  /* Acquire all queues dim_locks */
  for (i = 0; i < vi->max_queue_pairs; i++)
          mutex_lock(&vi->rq[i].dim_lock);

There's no deadlock here because the vq locks are always taken
in the same order, but lockdep can not figure it out. So refactoring
the code to alleviate the problem.

[1]
========================================================
WARNING: possible recursive locking detected
6.9.0-rc7+ #319 Not tainted
--------------------------------------------
ethtool/962 is trying to acquire lock:

but task is already holding lock:

other info that might help us debug this:
Possible unsafe locking scenario:

      CPU0
      ----
 lock(&vi->rq[i].dim_lock);
 lock(&vi->rq[i].dim_lock);

*** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by ethtool/962:
 #0: ffffffff82dbaab0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x40
 #1: ffffffff82dad0a8 (rtnl_mutex){+.+.}-{3:3}, at:
				ethnl_default_set_doit+0xbe/0x1e0

stack backtrace:
CPU: 6 PID: 962 Comm: ethtool Not tainted 6.9.0-rc7+ #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
	   rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x79/0xb0
 check_deadlock+0x130/0x220
 __lock_acquire+0x861/0x990
 lock_acquire.part.0+0x72/0x1d0
 ? lock_acquire+0xf8/0x130
 __mutex_lock+0x71/0xd50
 virtnet_set_coalesce+0x151/0x190
 __ethnl_set_coalesce.isra.0+0x3f8/0x4d0
 ethnl_set_coalesce+0x34/0x90
 ethnl_default_set_doit+0xdd/0x1e0
 genl_family_rcv_msg_doit+0xdc/0x130
 genl_family_rcv_msg+0x154/0x230
 ? __pfx_ethnl_default_set_doit+0x10/0x10
 genl_rcv_msg+0x4b/0xa0
 ? __pfx_genl_rcv_msg+0x10/0x10
 netlink_rcv_skb+0x5a/0x110
 genl_rcv+0x28/0x40
 netlink_unicast+0x1af/0x280
 netlink_sendmsg+0x20e/0x460
 __sys_sendto+0x1fe/0x210
 ? find_held_lock+0x2b/0x80
 ? do_user_addr_fault+0x3a2/0x8a0
 ? __lock_release+0x5e/0x160
 ? do_user_addr_fault+0x3a2/0x8a0
 ? lock_release+0x72/0x140
 ? do_user_addr_fault+0x3a7/0x8a0
 __x64_sys_sendto+0x29/0x30
 do_syscall_64+0x78/0x180
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Fixes: 4d4ac2ec ("virtio_net: Add a lock for per queue RX coalesce")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240528134116.117426-3-hengqi@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the dim worker is scheduled, if it no longer needs to issue
commands, dim may not be able to return to the working state later.

For example, the following single queue scenario:
  1. The dim worker of rxq0 is scheduled, and the dim status is
     changed to DIM_APPLY_NEW_PROFILE;
  2. dim is disabled or parameters have not been modified;
  3. virtnet_rx_dim_work exits directly;

Then, even if net_dim is invoked again, it cannot work because the
state is not restored to DIM_START_MEASURE.

Fixes: 62087995 ("virtio-net: support rx netdim")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240528134116.117426-2-hengqi@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Statistic values should be set to ETHTOOL_STAT_NOT_SET even if the
device doesn't support statistics. Otherwise zeros will be returned as
if they are proper values:

host# ethtool -I -T lo
Time stamping parameters for lo:
Capabilities:
	software-transmit
	software-receive
	software-system-clock
PTP Hardware Clock: none
Hardware Transmit Timestamp Modes: none
Hardware Receive Filter Modes: none
Statistics:
  tx_pkts: 0
  tx_lost: 0
  tx_err: 0

Fixes: 0e9c1277 ("ethtool: add interface to read Tx hardware timestamping statistics")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20240530040814.1014446-1-vadfed@meta.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Motorcomm PHY driver is now maintained by the OEM. The driver has
expanded far beyond my original purpose, and I do not have the hardware
to test against the new portions of it. Therefore I am removing myself as
a maintainer of the driver.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20240529185635.538072-1-pgwipeout@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Refactored the handling of control_buf to be within the cvq_lock
critical section, mitigating race conditions between reading device
responses and new command submissions.

Fixes: 6f45ab3e ("virtio_net: Add a lock for the command VQ.")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240530034143.19579-1-hengqi@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 0a44dfc0 ("wifi: mac80211: simplify non-chanctx
drivers") ieee80211_hw_config() is no longer called with changed = ~0.
rtlwifi relied on ~0 in order to ignore the default retry limits of
4/7, preferring 48/48 in station mode and 7/7 in AP/IBSS.

RTL8192DU has a lot of packet loss with the default limits from
mac80211. Fix it by ignoring IEEE80211_CONF_CHANGE_RETRY_LIMITS
completely, because it's the simplest solution.

Link: https://lore.kernel.org/linux-wireless/cedd13d7691f4692b2a2fa5a24d44a22@realtek.com/
Cc: stable@vger.kernel.org # 6.9.x
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/1fabb8e4-adf3-47ae-8462-8aea963bc2a5@gmail.com

Here's another one I missed during the initial conversion,
fix that.

Cc: stable@vger.kernel.org
Reported-by: Rene Petersen <renepetersen@posteo.de>
Fixes: 0a44dfc0 ("wifi: mac80211: simplify non-chanctx drivers")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218895Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528142308.3f7db1821e68.I531135d7ad76331a50244d6d5288e14aa9668390@changeid

Commit f236464f ("wifi: wilc1000: convert list management to RCU")
attempted to convert SRCU to RCU usage, assuming it was not really needed.
The runtime issues that arose after merging it showed that there are code
paths involving sleeping functions, and removing those would need some
heavier driver rework.

Add some documentation about SRCU need to make sure that any future
developer do not miss some use cases if tempted to convert back again to
RCU.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-3-bce096e0798c@bootlin.com

This reverts commit 35aee01f

Commit 35aee01f ("wifi: wilc1000: set atomic flag on kmemdup in srcu
critical section") was preparatory to the SRCU to RCU conversion done by
commit f236464f ("wifi: wilc1000: convert list management to RCU").
This conversion brought issues and so has been reverted, so the atomic flag
is not needed anymore.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-2-bce096e0798c@bootlin.com

This reverts commit f236464f

Commit f236464f ("wifi: wilc1000: convert list management to RCU")
replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No
documentation or commit history hinted about why SRCU has been preferred
in original design, so it has been assumed to be safe to do this
conversion.
Unfortunately, some static analyzers raised warnings, confirmed by runtime
checker, not long after the merge. At least three different issues arose
when switching to RCU:
- wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical
  section yet calls wait_for_completion_timeout
- wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while
  manipulating a vif retrieved from vif list
- set_channel sends command to chip (and so, also waits for a completion)
  while holding a vif retrieved from vif list (so, in RCU read critical
  section)

Some of those issues are not trivial to fix and would need bigger driver
rework. Fix those issues by reverting the SRCU to RCU conversion commit
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/3b46ec7c-baee-49fd-b760-3bc12fb12eaf@moroto.mountain/
Fixes: f236464f ("wifi: wilc1000: convert list management to RCU")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-1-bce096e0798c@bootlin.com

Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git

ath.git fixes for 6.10. Two fixes for user reported regressions in
ath11k. One dependency fix and one error path fix.

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - gro: initialize network_offset in network layer

   - tcp: reduce accepted window in NEW_SYN_RECV state

  Current release - new code bugs:

   - eth: mlx5e: do not use ptp structure for tx ts stats when not
     initialized

   - eth: ice: check for unregistering correct number of devlink params

  Previous releases - regressions:

   - bpf: Allow delete from sockmap/sockhash only if update is allowed

   - sched: taprio: extend minimum interval restriction to entire cycle
     too

   - netfilter: ipset: add list flush to cancel_gc

   - ipv4: fix address dump when IPv4 is disabled on an interface

   - sock_map: avoid race between sock_map_close and sk_psock_put

   - eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete
     status rules

  Previous releases - always broken:

   - core: fix __dst_negative_advice() race

   - bpf:
       - fix multi-uprobe PID filtering logic
       - fix pkt_type override upon netkit pass verdict

   - netfilter: tproxy: bail out if IP has been disabled on the device

   - af_unix: annotate data-race around unix_sk(sk)->addr

   - eth: mlx5e: fix UDP GSO for encapsulated packets

   - eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
     buffers

   - eth: i40e: fully suspend and resume IO operations in EEH case

   - eth: octeontx2-pf: free send queue buffers incase of leaf to inner

   - eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"

* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  netdev: add qstat for csum complete
  ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
  net: ena: Fix redundant device NUMA node override
  ice: check for unregistering correct number of devlink params
  ice: fix 200G PHY types to link speed mapping
  i40e: Fully suspend and resume IO operations in EEH case
  i40e: factoring out i40e_suspend/i40e_resume
  e1000e: move force SMBUS near the end of enable_ulp function
  net: dsa: microchip: fix RGMII error in KSZ DSA driver
  ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
  net: fix __dst_negative_advice() race
  nfc/nci: Add the inconsistency check between the input data length and count
  MAINTAINERS: dwmac: starfive: update Maintainer
  net/sched: taprio: extend minimum interval restriction to entire cycle too
  net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
  netfilter: nft_fib: allow from forward/input without iif selector
  netfilter: tproxy: bail out if IP has been disabled on the device
  netfilter: nft_payload: skbuff vlan metadata mangle support
  net: ti: icssg-prueth: Fix start counter for ft1 filter
  sock_map: avoid race between sock_map_close and sk_psock_put
  ...

Recent commit 0cfe71f4 ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f4 ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>