Skip to content

L
linux
Switch branch/tag
  1. 19 Apr, 2017 7 commits
  3. 05 Apr, 2017 6 commits
  5. 04 Apr, 2017 6 commits
  7. 03 Apr, 2017 5 commits
  9. 31 Mar, 2017 9 commits
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-4.11/devicetree-fixes' of http://github.com/Broadcom/stblinux into fixes · 3f5099f0
      Arnd Bergmann authored 
      There was a little conflict between the v4.11 bugfixes and the new changes for 4.12,
this merges the fixes into the 4.12 branch to avoid having to resolve it again.

* Broadcom fixes in mainline
  ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
  ARM: dts: BCM5301X: Fix memory start address
  ARM: dts: BCM5301X: Fix UARTs on bcm953012k
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      3f5099f0
    • Arnd Bergmann's avatar
      Merge tag 'omap-for-v4.12/dt-v2-signed' of... · 944d01c5
      Arnd Bergmann authored 
      Merge tag 'omap-for-v4.12/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Devicetree changes for omaps for v4.12 merge window" from Tony Lindgren:

- Add hecc node for am35x

- Add onenand support for omap3-igep

- Add bluetooth binding for n900/n9/n950

- Configure clocks and SATA for dm81xx

- Update operating points tables for am33xx, am43xx and dra7

- Update SPI flash documentation for w25q64

- Configure SPI NOR for am335x-icev2

- Mux uart0 for am437x-gp-evm

- Add thermal zones for omap3, omap4, omap5, dra7

- Configure LEDs for am335x-baltos

- A series of droid 4 changes to configure various devices
  such as keypad, regulators, gpio-keys, rtc, power button,
  compass, accelerometer, touchscreen, backlight, poweroff,
  tmp105, HDMI, LCD panel and LEDs, EHCI, and micro-SD

* tag 'omap-for-v4.12/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits)
  ARM: dts: am335x-baltos: add LED support
  ARM: dts: omap4-droid4: Fix MMC1 card for detect GPIO and regulator
  ARM: dts: OMAP4460: Thermal: Add slope and offset values
  ARM: dts: OMAP443x: Thermal: Add slope and offset values
  ARM: dts: OMAP5: Thermal: Add slope and offset values
  ARM: dts: DRA7: Thermal: Add slope and offset values
  ARM: dts: omap3: Add cpu_thermal zone
  ARM: dts: am437x-gp-evm: Add pinmux for uart0
  ARM: dts: am335x-icev2: Add SPI based NOR
  Documentation: devicetree: mtd: add w25q64 to list of supported SPI flashes
  ARM: dts: dra7: Add updated operating-points-v2 table for cpu
  ARM: dts: am4372: Update operating-points-v2 table for cpu
  ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu
  ARM: dts: am33xx: Add updated operating-points-v2 table for cpu
  ARM: dts: dm8168-evm: add SATA node
  ARM: dts: dm8168-evm: add the external reference clock for SATA
  ARM: dts: N9/N950: add bluetooth
  ARM: dts: N900: Add bluetooth
  ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
  ARM: dts: motorola-cpcap-mapphone: add LEDs
  ...
      944d01c5
    • Arnd Bergmann's avatar
      Merge tag 'v4.12-rockchip-dts32-1' of... · 5ea67992
      Arnd Bergmann authored 
      Merge tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 updates for 4.12 part1" from Heiko Stübner:

Contains one new board, the Tinkerboard from Asus based on the rk3288,
definitions for the mmc resets in the socs reset controller, sound
support for the Rock2, dma support for mmc controllers on the rk3188
and a led-fix for the MiQi board and and irq-fix for older Cortex-A9 socs.

* tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: setup DMA-channels for mmc0 and emmc for rk3188
  ARM: dts: rockchip: fix PPI misconfiguration on Cortex-A9 socs
  ARM: dts: rockchip: add rk322x dw-mmc resets
  ARM: dts: rockchip: add rk3066/rk3188 dw-mmc resets
  ARM: dts: rockchip: add rk3036 dw-mmc resets
  ARM: dts: rockchip: add rk3288 dw-mmc resets
  ARM: dts: rockchip: add dts for RK3288-Tinker board
  dt-bindings: add rk3288-based Asus Tinker board
  ARM: dts: rockchip: fix the MiQi board's LED definition
  ARM: dts: rockchip: Add support for ES8388 to the Radxa Rock 2
      5ea67992
    • Arnd Bergmann's avatar
      Merge tag 'gemini-dts-2' of... · f63c00bc
      Arnd Bergmann authored 
      Merge tag 'gemini-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Pull "DTS updates for the Gemini on top of the multiplatform base" from Linus Walleij:

- Add the power controller to the DTS.
- Augment the GPIO nodes to also include the Faraday
  compatible.
- Add the PCI bus host and config to the Gemini device trees.

* tag 'gemini-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: add PCI to the Gemini device trees
  ARM: dts: augment Gemini GPIO nodes
  ARM: dts: add power controller to the Gemini DTS
      f63c00bc
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux into next/dt · 1b188329
      Arnd Bergmann authored 
      Pull "Broadcom devicetree changes for 4.12" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs Device Tree updates for
4.12, please pull the following:

- Rafal:

	* adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys
	  EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with
	  a bunch of BCM43602 radios.

	* updates the BCM5301X DTS and DTS include file and moves the serial
	  console parameters to the DTS include file since all BCM5301X that we have so
	  far are consistent in using the same UART. He also does the same for the
	  BCM53573 DTS.

	* makes some updates to the Tenda AC9 platform by describing its
	  PCIe controllers and endpoints in order to be able to represent GPIOs attached
	  to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected
	  to one of these GPIOs.

	* re-licenses the DTS files he created to the ISC license

	* removes the use of the non-existend "default-off" LED trigger in the
	  BCM53573 and BCM5301X DTS files

- Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness

- Jon:
	* adds NAND controller Device Tree nodes to the BCM953012K reference board

  	* converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller
  	  Device Tree nodes.

	* fixes the GIC PPI interrupt flags that the kernel now
  	  reports about.

	* adds ARM TWD watchdog entries to the BCM5301X DTS include file
  	* adds I2C entries to the BCM5301X DTS include files.

	* disables i2c by default in the Northstar Plus DTS include file, and
	 ,enables it at the board level instead.

	* adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS
	  include files.

- Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the
  Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet
  aliases to the BCM53012HR board since some bootloaders require that for MAC address
  patching.

- Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files
  but leaves them disabled by default (overlays should take care of enabling it)

- Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs

- Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs

- Rob fixes the iProc msi-controller name and unit address now that DTC can produce
  additional errors

* tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux: (27 commits)
  ARM: dts: bcm: fix msi-controller name and unit address
  ARM: dts: BCM53573: Specify serial console parameters
  ARM: dts: BCM5301X: Specify serial console params in dtsi files
  ARM: dts: NSP: Add crypto (SPU) to dtsi
  ARM: dts: NSP: Add mailbox (PDC) to NSP
  ARM: dts: BCM953012HR: Add ethernet aliases
  ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
  ARM: dts: NSP: disable i2c DT entry by default
  ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree
  ARM: dts: BCM5301X: Add I2C support to the DT
  ARM: dts: BCM5301X: Add TWD WD Support to DT
  ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
  ARM: dts: bcm2835: add sdhost controller to devicetree
  ARM: dts: bcm283x: Add HDMI audio related properties
  ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger
  ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger
  ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
  ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
  ARM: dts: bcm2835: Add the DSI module nodes and clocks.
  ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
  ...
      1b188329
    • Arnd Bergmann's avatar
      Merge tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu into next/dt · b916a609
      Arnd Bergmann authored 
      Pull "mvebu dt for 4.12 (part 1)" from Gregory CLEMENT:

- Add node lable for Armada 38x
- Add support for Synology DS116 NAS and Linksys WRT1900ACS
- Update mbus controller description on Armada 38x allowing entering in standby
- Add default trigger for sata led on various linksys boards
- Update newly added armada-xp-98dx3236
- Enable hardware buffer manager support for the devices in the
  Linksys WRT AC Serie

* tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: mvebu: linksys: enable buffer manager support
  ARM: dts: mvebu: remove unnecessary PCI range from 98dx3236
  ARM: dts: mvebu: Move mv98dx3236 clock bindings
  ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236
  ARM: dts: armada-xp-98dx3236: combine dfx server nodes
  ARM: dts: armada: Add default trigger for sata led
  ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x
  ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby)
  ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS
  ARM: dts: armada-38x add node labels
      b916a609
    • Arnd Bergmann's avatar
      Merge tag 'davinci-for-v4.12/dt' of... · 2c5ad976
      Arnd Bergmann authored 
      Merge tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

Pull "DaVinci DT updates for v4.12" from Sekhar Nori:

DaVinci device tree updates to enable
Video display on DA850 along with some
whitespace clean-up.

Also, enables sound and ADC support on
Lego EV3.

* tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-evm: add the output port to the vpif node
  ARM: dts: da850-evm: add IO expander node on UI card
  ARM: dts: da850: add vpif video display pins
  ARM: dts: da850-evm: fix whitespace errors
  ARM: da850-lego-ev3: Add device tree node for sound
  ARM: da850-lego-ev3: Add device tree node for A/DC
      2c5ad976
    • Linus Walleij's avatar
      ARM: dts: augment Moxa ART GPIO node · 0409d756
      Linus Walleij authored 
      The Moxa ART GPIO is a Faraday FTGPIO010. Augment the DTS node
to indicate both compatible values for the SoC and the IP part.
Also increase the register range to 0x100, it has at least 0x48
bytes of registers, and a few extra will not hurt.
Tested-by: default avatarJonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      0409d756
    • Arnd Bergmann's avatar
      Merge tag 'uniphier-dt-v4.12' of... · c83e93e6
      Arnd Bergmann authored 
      Merge tag 'uniphier-dt-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

Pull "UniPhier ARM SoC DT updates for v4.12" from Masahiro Yamada:

- Remove skeleton.dtsi inclusion
- Fix W=* build warnings
- Fix eMMC pin-mux node
- Add pagesize properties to EEPROM nodes

* tag 'uniphier-dt-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: add pagesize property to EEPROM of proto boards
  ARM: dts: uniphier: add pagesize property to EEPROM of Support Card
  ARM: dts: uniphier: fix pin groups of eMMC pin-mux node
  ARM: dts: uniphier: move memory node below aliases node
  ARM: dts: uniphier: fix no unit name warnings
  ARM: dts: uniphier: remove skeleton.dtsi inclusion
      c83e93e6
  11. 30 Mar, 2017 1 commit
  13. 29 Mar, 2017 3 commits
  15. 28 Mar, 2017 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7