The tuner type table misses descriptions for each type. While
most of stuff are obvious, the two SDR definitions aren't.

So, add descriptions to all of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Adjust simple cases where the columns on some vidioc files
are overriding their neighbours.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The tables don't fit at the page on this file. As noticed
before, Sphinx (or LaTeX?) does a crap job on tables with
cell span, and some work has to be done to make it fit.

Move the see also reference to a footnote, break one paragraph
into two and adjust the table columns to make it visible.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This table is too big for LaTeX output, and lacks columns
specs for LaTeX format.

Also, it has a hidden column, as there are some cell spans
with the wrong values.

Fix it, so it can be displayed properly on LaTeX/PDF.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Some tables are not properly displayed on LaTeX. Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are two tables with mangled columns. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Better adjust the columns for LaTeX output
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This table has several troubles:
	- a duplicated "struct" on its name;
	- a reference to a V4L version 1 struct that will never
	  point to something (as we got rid of V4L1 API a long
	  time ago);
	- misses hints for LaTeX output (column size and longtable
	  style).

Fix them.

It should be noticed that the first column of this table is
not aligned with the rest. I suspect that this is a bug at
the flat-table extension.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix mosto fo the tables there in order to make them fit at the
page size.

There are, however, two exceptions: RGB and YUV big tables,
where adding the raw latex adjustbox caused the tables to not
be properly formatted. I suspect that the problem is because
those are long tables, but not really sure.

The thing is that Sphinx lacks an "adjustbox" tag that would
avoid the raw latex hacks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The table there is too big and doesn't have format hints for
LaTeX output.

Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

One of the tables has wrong column dimentions. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Better format the tables in a way that will fit inside the
page.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Just like on dvb-raw-vbi.rst, the LaTeX output doesn't work
well with cell spans. Also, this is actually a note, so, move
it to a footnote.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Originally, each image were one page big, causing them to be
displayed on separate pages at the PDF output. Re-generate
them from the gif files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add the needed tags to fix LaTeX output of the tables there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There's a bug with LaTeX output on flat-tables with Sphinx 1.4.5
that prevents references at a cell span to be broken. As the
text is indeed too long, it makes sense to place the reference
to the pictures showing the VBI limits as a footnote.

That makes the text easier to read and also solves the issue
with LaTeX output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There's one note there that it is indented for no good reason.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The table columns are not properly displayed. Also, some
tables are too big to fit into just one page. So, fix them,
in order to better display the tables.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Those hints are wrong, and doesn't really improve the look
of those tables. So, keep them only when they're useful.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Adjust the table to fit at the LaTeX and PDF outputs, just like
what was done with pixfmt-packed-rgb.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Adjust the tables to fit at the LaTeX and PDF outputs.

I wrote a previous patch RFC to show the big table in landscape,
but it makes harder to read on displays.

So, instead, let's use the adjustbox to shrink the size of those
long tables, as the table size can still be visible on screen,
and it is a way better to read in horizontal position and
visible if printed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There is an extra column just before eack pack of bits, to
improve table reading, but the header file didn't take this
into account.

Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add column hints for LaTeX to format columns on the tables inside
pixfmt-002.rst and pixfmt-006.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Lots of tables at extended-controls.rst need explicit hints for
LaTeX to adjust their widths. Provide that.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Manually adjust the table width for it to look nice on PDF output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

LaTeX doesn't handle too well auto-width on tables, and ReST
markup requires an special tag to give it the needed hints.

As we're using A4 paper, we have 17cm of useful spaces. As
most media tables have widths, let's use it to generate the
needed via the following perl script:

my ($line_size, $table_header, $has_cols) = (17.5, 0, 0);
my $out;
my $header = "";
my @widths = ();
sub round { $_[0] > 0 ? int($_[0] + .5) : -int(-$_[0] + .5) }
while (<>) {
	if (!$table_header) {
		$has_cols = 1 if (m/..\s+tabularcolumns::/);
		if (m/..\s+flat-table::/) {
			$table_header = 1;
			$header = $_;
			next;
		}
		$out .= $_;
		next;
	}
	$header .= $_;
	@widths = split(/ /, $1) if (m/:widths:\s+(.*)/);
	if (m/^\n$/) {
		if (!$has_cols && @widths) {
			my ($tot, $t, $i) = (0, 0, 0);
			foreach my $v(@widths) { $tot += $v; };
			$out .= ".. tabularcolumns:: |";
			for ($i = 0; $i < scalar @widths - 1; $i++) {
				my $v = $widths[$i];
				my $w = round(10 * ($v * $line_size) / $tot) / 10;
				$out .= sprintf "p{%.1fcm}|", $w;
				$t += $w;
			}
			my $w = $line_size - $t;
			$out .= sprintf "p{%.1fcm}|\n\n", $w;
		}
		$out .= $header;
		$table_header = 0;
		$has_cols = 0;
		$header = "";
		@widths = ();
	}
}
print $out;
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are some texts there on the wrong place. Re-generate it
from the svg file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Both tables on this rst file were not shown right, as they miss
the proper tag (tabularcolumns) to specify the column widths
required for PDF and LaTeX output.

Also, the second table is too big to fit into one page. So,
it should use the longtable class to allow it to be split into
two pages.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are two tables with a C code-block inside it. Unfortunately,
that causes LaTeX output to break. Yet, there's nothing special
there, so let's remove the code-block from them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Change multi-line note tags to be more symetric, e. g. not starting
the text together witht the tag.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The items at the sound carrier had a bullet. Those are not needed.

So, get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Somehow, the conversion broke a reference here. Re-add it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

pdflatex doesn't like gif images:
	None:None: WARNING: no matching candidate for image URI u'media/uapi/v4l/pixfmt-nv12mt_files/nv12mt.*'
	None:None: WARNING: no matching candidate for image URI u'media/uapi/v4l/pixfmt-nv12mt_files/nv12mt_example.*'

But it works fine with png. So, convert them. As a plus, PNG images
are smaller.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Linux 4.8-rc1

* tag 'v4.8-rc1': (6093 commits)
  Linux 4.8-rc1
  block: rename bio bi_rw to bi_opf
  target: iblock_execute_sync_cache() should use bio_set_op_attrs()
  mm: make __swap_writepage() use bio_set_op_attrs()
  block/mm: make bdev_ops->rw_page() take a bool for read/write
  fs: return EPERM on immutable inode
  ramoops: use persistent_ram_free() instead of kfree() for freeing prz
  ramoops: use DT reserved-memory bindings
  NTB: ntb_hw_intel: use local variable pdev
  NTB: ntb_hw_intel: show BAR size in debugfs info
  ntb_test: Add a selftest script for the NTB subsystem
  ntb_perf: clear link_is_up flag when the link goes down.
  ntb_pingpong: Add a debugfs file to get the ping count
  ntb_tool: Add link status and files to debugfs
  ntb_tool: Postpone memory window initialization for the user
  ntb_perf: Wait for link before running test
  ntb_perf: Return results by reading the run file
  ntb_perf: Improve thread handling to increase robustness
  ntb_perf: Schedule based on time not on performance
  ntb_transport: Check the number of spads the hardware supports
  ...

Pull more block fixes from Jens Axboe:
 "As mentioned in the pull the other day, a few more fixes for this
  round, all related to the bio op changes in this series.

  Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf.  I
  wanted to do that change right after or right before -rc1, so that
  risk of conflict was reduced.  I just rebased the series on top of
  current master, and no new ->bi_rw usage has snuck in"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: rename bio bi_rw to bi_opf
  target: iblock_execute_sync_cache() should use bio_set_op_attrs()
  mm: make __swap_writepage() use bio_set_op_attrs()
  block/mm: make bdev_ops->rw_page() take a bool for read/write

Pull drm zpos property support from Dave Airlie:
 "This tree was waiting on some media stuff I hadn't had time to get a
  stable branchpoint off, so I just waited until it was all in your tree
  first.

  It's been around a bit on the list and shouldn't affect anything
  outside adding the generic API and moving some ARM drivers to using
  it"

* tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux:
  drm: rcar: use generic code for managing zpos plane property
  drm/exynos: use generic code for managing zpos plane property
  drm: sti: use generic zpos for plane
  drm: add generic zpos property

Since commit 63a4cc24, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.
Signed-off-by: Jens Axboe <axboe@fb.com>

The original commit missed this function, it needs to mark it a
write flush.

Cc: Mike Christie <mchristi@redhat.com>
Fixes: e742fc32 ("target: use bio op accessors")
Signed-off-by: Jens Axboe <axboe@fb.com>

Cleaner than manipulating bio->bi_rw flags directly.
Signed-off-by: Jens Axboe <axboe@fb.com>