- 03 May, 2011 15 commits
-
-
Mark Brown authored
Actually the current code is perfectly sensible given the hardware. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@ti.com>
-
Mark Brown authored
Gives finer grained power management. Signed-off-by:
-
Mark Brown authored
Merge branch 'topic/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.40
-
Stephen Warren authored
Control sharing is enabled when two widgets include pointers to the same kcontrol_new in their definition. Specifically: static const struct snd_kcontrol_new adcinput_mux = SOC_DAPM_ENUM("ADC Input", adcinput_enum); static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = { SND_SOC_DAPM_MUX("Left ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), SND_SOC_DAPM_MUX("Right ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), }; This is useful when a single register bit or field affects multiple muxes at once. The common case is to have separate control bits or fields for each mux (channel). An alternative way of looking at this is that the mux is a stereo (or even n-channel) mux, rather than independant mono muxes. Without this change, a separate kcontrol will be created for each DAPM_MUX. This has the following disadvantages: * Confuses the user/programmer with redundant controls that don't map to separate hardware. * When one of the controls is changed, ASoC fails to update the DAPM logic for paths solely affected by the other controls impacted by the same register bits. This causes some paths not to be correctly powered up or down. Prior to this change, to work around this, the user or programmer had to manually toggle all duplicate controls away from the intended setting, and then back to it. Control sharing implies that the control is named based on the kcontrol_new itself, not any of the widgets that are affected by it. Control sharing is implemented by: When creating kcontrols, if a kcontrol does not yet exist for a particular kcontrol_new, then a new kcontrol is created with a list of widgets containing just a single entry. This is the normal case. However, if a kcontrol does already exists for the given kcontrol_new, the current widget is simply added to that kcontrol's list of affected widgets. Signed-off-by:Stephen Warren <swarren@nvidia.com> Acked-by:
-
Stephen Warren authored
A future change will allow multiple widgets to be affected by the same control. For example, a single register bit that controls separate muxes in both the L and R audio paths. This change updates the code that handles relevant controls to be able to iterate over a list of affected widgets. Note that only the put functions need significant modification to implement the iteration; the get functions do not need to iterate, nor unify the results, since all affected widgets reference the same kcontrol. When creating the list of widgets, always create a 1-sized list, since the control sharing is not implemented in this change. Signed-off-by:
-
Stephen Warren authored
Future changes will need reference to the kcontrol created for a given kcontrol_new. Store the created kcontrol values now. Signed-off-by:
-
Stephen Warren authored
A future change will modify struct snd_soc_dapm_widget to store the actual kcontrol pointers for each kcontrol_new in a field named kcontrols. Rename the existing kcontrols field to enable this. Signed-off-by:
-
Mark Brown authored
-
Lars-Peter Clausen authored
The i2s shutdown callback has the check whether it should be disabled reversed. Currently it is disabled if another stream is still active, but kept enabled if the last stream is closed. This patch fixes it. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
-
Lars-Peter Clausen authored
Remove the DAPM debugfs entries before freeing the context's widgets, otherwise a use after free situation might occur. Signed-off-by:
-
Lars-Peter Clausen authored
Currently debugfs entries for a DAPM widgets are only added in snd_soc_dapm_debugfs_init. If a widget is added later (for example in the dai_link's probe callback) it will not show up in debugfs. This patch moves the creation of the widget debugfs entry to snd_soc_dapm_new_widgets where it will be added after the widget has been properly instantiated. As a side-effect this will also reduce the number of times the DAPM widget list is iterated during a card's instantiation. Since it is possible that snd_soc_dapm_new_widgets is invoked form the codecs or cards probe callbacks, the creation of the debugfs dapm directory has to be moved before these are called. Signed-off-by:
-
Lars-Peter Clausen authored
Move the creation of the DAPM debugfs directory to snd_soc_dapm_debugfs_init instead of having the same duplicated code in both codec and card DAPM setup. Signed-off-by:
-
Lars-Peter Clausen authored
Free the card's DAPM context when the card is removed. Signed-off-by:
-
Mike Rapoport authored
Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Acked-by:
-
Takashi Iwai authored
The enum texts are supposed to be const char * const []. Without the second const, it gets compile warnings like sound/soc/codecs/max98095.c:607:2: warning: initialization discards qualifiers from pointer target type Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
- 28 Apr, 2011 6 commits
-
-
Mark Brown authored
Signed-off-by:
Jassi Brar <jassisinghbrar@gmail.com> Acked-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
-
Mark Brown authored
Immediately after sending the last fix I realised that the CODEC DAI names also don't correspond to the WM8994 driver. Update the DAI names to match. Signed-off-by:
-
Mark Brown authored
This was typoed at some point in the multi-component merge, though the driver was added along with that. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
- 27 Apr, 2011 5 commits
-
-
Mark Brown authored
Signed-off-by:
-
Lars-Peter Clausen authored
This patch adds a helper function for searching DAPM widgets by name. This allows to streamline functions which operate on widgets by name. It also allows to get rid of copy'n'pasted code which was added to fallback to widgets from other contexts if the widget was not found in the current context. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Since we can now support multiple platforms allow machines to not specify a platform in a DAI link. Since the rest of the code requires that we have a struct device for all objects we do this by substituting in a dummy device that we register automatically. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
- 26 Apr, 2011 14 commits
-
-
Mark Brown authored
When bringing up audio low power modes boards may configure SYSCLK before they actually start the FLL as we do much of the clocking setup prior to the power up sequence. Signed-off-by:
-
Mark Brown authored
DMIC support is automatically disabled when none of the GPIOs are set up to bring out the DMICCLK and DMICDAT pins at startup. Note that there's no support for controlling DMIC routing except the power control so the board DAPM configuration will need to manage DMIC enable and disable if analogue mics (eg, a headset) also exist. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
There's only one DAI anyway. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
We can safely divide these down to within the supported SYSCLK range. Signed-off-by:
-
Mark Brown authored
-
Ben Gardiner authored
The current davinci_mcasp_set_dai_fmt() sets bits ACLKX and ACLKR in the PDIR register for the codec clock-master/frame-slave mode; however, this results in the ACLKX and ACLKR pins being outputs according to SPRUFM1 [1] which conflicts with "codec is clock master." Similarly to the previous patch in this series, "fix _CBM_CFS hw_params" -- For codec clock-master/frame-slave mode (_CMB_CFS), clear bits ACLKX and ACLKR in the PDIR register to set the pins as inputs and hence allow externally sourced bit-clocks. [1] http://www.ti.com/litv/pdf/sprufm1Signed-off-by:
Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by:
James Nuss <jamesnuss@nanometrics.ca> Acked-by:
-
Ben Gardiner authored
The current davinci_mcasp_set_dai_fmt() sets bits ACLKXE and ACLKRE (CLKXM and CLKRM as they are reffered to in SPRUFM1 [1]) for codec clock-slave/ frame-slave mode (_CBS_CFS) which selects internally generated bit-clock and frame-sync signals; however, it does the same thing again for codec clock-master/frame-slave mode (_CBM_CFS) in the very next case statement which is incorrectly selecting internally generated bit-clocks in this mode. For codec clock-master/frame-slave mode (_CBM_CFS), clear bits ACLKXE and ACLKRE to select externally-generated bit-clocks. [1] http://www.ti.com/litv/pdf/sprufm1Signed-off-by:
-
Ben Gardiner authored
The current driver creates value for set/clr of PDIR using (x<<26) instead of the #defines that are convieniently made available. Update the driver to use the bitfield definitions of PDIR. There is no functional change introduced by this patch. Signed-off-by:
-
Ben Gardiner authored
The current check for the number of tdm-slots specified by platform data is always true (x >= 2 || x <= 32); therefore the else branch that warns of an incorrect number of slots can never be taken. Check that the number of tdm slots specified by platform data is between 2 and 32, inclusive. Signed-off-by:
-
Kuninori Morimoto authored
The FIFO of each port were always working though it was not used in current FSI driver. This patch add module/port clock control function for fixing it. This patch is also caring suspend/resume. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Simon Horman <simon@horms.net> Acked-by:
-
Kuninori Morimoto authored
Current FSI driver sets important settings when probing. And it are not set again as long as driver is not bind again. This mean FSI driver will lost it from register if suspend/resume are happen. This patch save important settings for suspend/resume. Signed-off-by:
-
Kuninori Morimoto authored
If FSI port is clock master, it use set_rate function which is callback from platform, and it is not necessary to call it if FSI port is clock slave. Current FSI driver called this callback if platform provide it. This patch modify it. Signed-off-by:
-
