- 03 Aug, 2017 40 commits
-
-
Ido Schimmel authored
Dump all the FIB tables in each net namespace upon registration to the FIB notification chain so that the callee will have a complete view of the tables. The integrity of the dump is ensured by a per-table sequence counter that is incremented (under write lock) whenever a route is added or deleted from the table. All the sequence counters are read (under each table's read lock) and summed, prior and after the dump. In case the counters differ, then the dump is either restarted or the registration fails. While it's possible for a table to be modified after its counter has been read, this isn't really a problem. In case it happened before it was read the second time, then the comparison at the end will fail. If it happened afterwards, then we're guaranteed to be notified about the change, as the notification block is registered prior to the second read. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Allow users of the FIB notification chain to receive a complete view of the IPv6 FIB rules upon registration to the chain. The integrity of the dump is ensured by a per-family sequence counter that is incremented (under RTNL) whenever a rule is added or deleted. All the sequence counters are read (under RTNL) and summed, prior and after the dump. In case the counters differ, then the dump is either restarted or the registration fails. Signed-off-by:
-
Ido Schimmel authored
As with IPv4, allow listeners of the FIB notification chain to receive notifications whenever a route is added, replaced or deleted. This is done by placing calls to the FIB notification chain in the two lowest level functions that end up performing these operations - namely, fib6_add_rt2node() and fib6_del_route(). Unlike IPv4, APPEND notifications aren't sent as the kernel doesn't distinguish between "append" (NLM_F_CREATE|NLM_F_APPEND) and "prepend" (NLM_F_CREATE). If NLM_F_EXCL isn't set, duplicate routes are always added after the existing duplicate routes. Signed-off-by:
-
Ido Schimmel authored
We're about to add IPv6 FIB offload support, so implement the necessary callbacks in IPv6 code, which will later allow us to add routes and rules notifications. Signed-off-by:
-
Ido Schimmel authored
As explained in commit 3c71006d ("ipv4: fib_rules: Check if rule is a default rule"), drivers supporting IPv6 FIB offload need to be able to sanitize the rules they don't support and potentially flush their tables. Add an IPv6 helper to check if a FIB rule is a default rule. Signed-off-by:
-
Ido Schimmel authored
Unlike the routing tables, the FIB rules share a common core, so instead of replicating the same logic for each address family we can simply dump the rules and send notifications from the core itself. To protect the integrity of the dump, a rules-specific sequence counter is added for each address family and incremented whenever a rule is added or deleted (under RTNL). Signed-off-by:
-
Ido Schimmel authored
As in previous patch, ignore IPv6 notifications since the driver doesn't support these. Signed-off-by:
-
Ido Schimmel authored
We're about to add IPv6 notifications in the FIB notification chain, but the driver currently doesn't support these, so ignore them. Signed-off-by:
-
Ido Schimmel authored
The FIB notification chain is currently soley used by IPv4 code. However, we're going to introduce IPv6 FIB offload support, which requires these notification as well. As explained in commit c3852ef7 ("ipv4: fib: Replay events when registering FIB notifier"), upon registration to the chain, the callee receives a full dump of the FIB tables and rules by traversing all the net namespaces. The integrity of the dump is ensured by a per-namespace sequence counter that is incremented whenever a change to the tables or rules occurs. In order to allow more address families to use the chain, each family is expected to register its fib_notifier_ops in its pernet init. These operations allow the common code to read the family's sequence counter as well as dump its tables and rules in the given net namespace. Additionally, a 'family' parameter is added to sent notifications, so that listeners could distinguish between the different families. Implement the common code that allows listeners to register to the chain and for address families to register their fib_notifier_ops. Subsequent patches will implement these operations in IPv6. In the future, ipmr and ip6mr will be extended to provide these notifications as well. Signed-off-by:
-
David S. Miller authored
Thomas Petazzoni says: ==================== net: mvpp2: add TX interrupts support So far, the mvpp2 driver was using an hrtimer to handle TX completion. This patch series adds support for using TX interrupts (for each CPU) on PPv2.2, the variant of the IP used on Marvell Armada 7K/8K. Dave: this version can be applied right away, it no longer depends on Antoine's patch series. Antoine series had some comments, so he will have to respin later on. Therefore, let's merge this smaller patch series first. Changes since v1: - Rebased on top of net-next, instead of on top of Antoine's series. - Removed the Device Tree patch, as it shouldn't go through the net tree. ==================== Signed-off-by: -
Thomas Petazzoni authored
The PPv2.2 unit has several interrupts used for TX completion notification. This commit updates the Device Tree binding describing this HW block to mention such interrupts. While at it, we update the example to use a recent Device Tree example, that uses interrupts going through the ICU, and not to the GIC directly. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Thomas Petazzoni authored
This commit adds the support for two related features: - Support for TX interrupts, with one interrupt for each CPU - Support for different RX queue distribution modes MVPP2_QDIST_SINGLE_MODE where a single interrupt, shared by all CPUs, receives the RX events, and MVPP2_QDIST_MULTI_MODE, where the per-CPU interrupts used for TX events are also used for RX events. Since additional interrupts are needed, an update to the Device Tree binding is needed. However, backward compatibility is preserved with the old Device Tree binding, by gracefully degrading to the original behavior, with only one RX interrupt, and TX completion being handled by an hrtimer. Signed-off-by:
-
Thomas Petazzoni authored
In preparation to the introduction of TX interrupts and improved RX queue distribution, this commit introduces the concept of "queue vector". A queue vector represents a number of RX and/or TX queues, and an associated NAPI instance and interrupt. This commit currently only creates a single queue_vector, so there are no changes in behavior, but it paves the way for additional queue_vector in the next commits. Signed-off-by:
-
Thomas Petazzoni authored
The PPv2.2 IP has a concept of "software thread", with all registers of the PPv2.2 mapped 8 times, for concurrent accesses by 8 "software threads". In addition, interrupts on RX queues are associated to such "software thread". For most cases, we map a "software thread" to the more conventional concept of CPU, but we will soon have one exception: we will have a model where we have one TX interrupt per CPU (each using one software thread), and all RX events mapped to another software thread (associated to another interrupt). In preparation for this change, it makes sense to change the naming from MVPP2_MAX_CPUS to MVPP2_MAX_THREADS, and plan for 8 software threads instead of 4 currently. Signed-off-by:
-
Thomas Petazzoni authored
Currently, the global variables rxq_number and txq_number hold the number of per-port TXQs and RXQs. Until now, such numbers were constant regardless of the driver configuration. As we are going to introduce different modes for TX and RX queues, these numbers will depend on the configuration (PPv2.1 vs. PPv2.2, exact queue distribution logic). Therefore, as a preparation, we move the number of RXQs and TXQs in the 'struct mvpp2_port' structure, next to the RXQs and TXQs descriptor arrays. For now, they remain initialized to the same default values as rxq_number/txq_number used to be initialized, but this will change in future commits. The only non-mechanical change in this patch is that the check to verify hardware constraints on the number of RXQs and TXQs is moved from mvpp2_probe() to mvpp2_port_probe(), since it's now in mvpp2_port_probe() that we initialize the per-port count of RXQ and TXQ. Signed-off-by:
-
Thomas Petazzoni authored
The RX queue group allocation is anyway re-done later in mvpp2_port_init(), so resetting it in mvpp2_init() is not very useful, and will be annoying as we are going to rework the RX queue group allocation logic. Signed-off-by:
-
Thomas Petazzoni authored
The MVPP21_ISR_RXQ_GROUP_REG register is not indexed by rxq, but by port, so we fix the parameter name accordingly. There are no functional changes. Signed-off-by:
-
Romain Perier authored
This operation is required for handling ioctl commands like SIOCGMIIREG, when debugging MDIO registers from userspace. This commit adds support for this operation. Signed-off-by:
Romain Perier <romain.perier@collabora.com> Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== Hisilicon Network Subsystem 3 Ethernet Driver This patch-set contains the support of the HNS3 (Hisilicon Network Subsystem 3) Ethernet driver for hip08 family of SoCs and future upcoming SoCs. Hisilicon's new hip08 SoCs have integrated ethernet based on PCI Express and hence there was a need of new driver over the previous HNS driver which is already part of the Linux mainline. This new driver is NOT backward compatible with HNS. This current driver is meant to control the Physical Function and there would soon be a support of a separate driver for Virtual Function once this base PF driver has been accepted. Also, this driver is the ongoing development work and HNS3 Ethernet driver would be incrementally enhanced with more new features. High Level Architecture: [ Ethtool ] ^ | | | [Ethernet Client] [ODP/UIO Client] . . . [ RoCE Client ] | | [ HNAE Device ] | | | --------------------------------------------- | | | [ HNAE3 Framework (Register/unregister) ] | | | --------------------------------------------- | | | [ HCLGE Layer] | ________________|_________________ | | | | | [ MDIO ] [ Scheduler/Shaper ] [ Debugfs* ] | | | | | |________________|_________________| | | | [ IMP command Interface ] | --------------------------------------------- | HIP08 H A R D W A R E * Current patch-set broadly adds the support of the following PF functionality: 1. Basic Rx and Tx functionality 2. TSO support 3. Ethtool support 4. * Debugfs support -> this patch for now has been taken off. 5. HNAE framework and hardware compatability layer 6. Scheduler and Shaper support in transmit function 7. MDIO support Change Log: V5->V6: Addressed below comments: * Andrew Lunn: Comments on MDIO and ethtool link mode * Leon Romanvosky: Some comments on HNAE layer tidy-up * Internal comments on redundant code removal, fixing error types etc. V4->V5: Addressed below concerns: * Florian Fanelli: Miscellaneous comments on ethtool & enet layer * Stephen Hemminger: comment of Netdev stats in ethool layer * Leon Romanvosky: Comments on Driver Version String, naming & Kconfig * Rochard Cochran: Redundant function prototype V3->V4: Addressed below comments: * Andrew Lunn: Various comments on MDIO, ethtool, ENET driver etc, * Stephen Hemminger: change access and updation to 64 but statistics * Bo You: some spelling mistakes and checkpatch.pl errors. V2->V3: Addressed comments * Yuval Mintz: Removal of redundant userprio-to-tc code * Stephen Hemminger: Ethtool & interuupt enable * Andrew Lunn: On C45/C22 PHy support, HNAE, ethtool * Florian Fainelli: C45/C22 and phy_connect/attach * Intel kbuild errors V1->V2: Addressed some comments by kbuild, Yuval MIntz, Andrew Lunn & Florian Fainelli in the following patches: * Add support of HNS3 Ethernet Driver for hip08 SoC * Add MDIO support to HNS3 Ethernet driver for hip08 SoC * Add support of debugfs interface to HNS3 driver ==================== Signed-off-by: -
Salil authored
This patch updates the MAINTAINERS file with HNS3 Ethernet driver maintainers names and other details. This also introduces the new Makefiles required to build the HNS3 Ethernet driver and updates the existing Kconfig file in the hisilicon folder. Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Salil authored
This patch adds the support of the Ethtool interface to the HNS3 Ethernet driver. Various commands to read the statistics, configure the offloading, loopback selftest etc. are supported. Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
-
Salil authored
This patch adds the support of MDIO bus interface for HNS3 driver. Code provides various interfaces to start and stop the PHY layer and to read and write the MDIO bus or PHY. Signed-off-by:
-
Salil authored
THis patch adds the support of the Scheduling and Shaping functionalities during the transmit leg. This also adds the support of Pause at MAC level. (Pause at per-priority level shall be added later along with the DCB feature). Hardware as such consists of two types of cofiguration of 6 level schedulers. Algorithms varies according to the level and type of scheduler being used. Current patch is used to initialize the mapping, algorithms(like SP, DWRR etc) and shaper(CIR, PIR etc) being used. Signed-off-by:
Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by:
-
Salil authored
This patch adds the support of Hisilicon Network Subsystem Accceleration Engine and common operations to access it. This layer provides access to the hardware configuration, hardware statistics. This layer is also responsible for triggering the initialization of the PHY layer through the below MDIO layer. Signed-off-by:
-
Salil authored
This patch adds the support of IMP (Integrated Management Processor) command interface to the HNS3 driver. Each PF/VF has support of CQP(Command Queue Pair) ring interface. Each CQP consis of send queue CSQ and receive queue CRQ. There are various commands a PF/VF may support, like for Flow Table manipulation, Device management, Packet buffer allocation, Forwarding, VLANs config, Tunneling/Overlays etc. This patch contains code to initialize the command queue, manage the command queue descriptors and Rx/Tx protocol with the command processor in the form of various commands/results and acknowledgements. Signed-off-by:
-
Salil authored
This patch adds the support of the HNAE3 (Hisilicon Network Acceleration Engine 3) framework support to the HNS3 driver. Framework facilitates clients like ENET(HNS3 Ethernet Driver), RoCE and user-space Ethernet drivers (like ODP etc.) to register with HNAE3 devices and their associated operations. Signed-off-by:
-
Salil authored
This patch adds the support of Hisilicon Network Subsystem 3 Ethernet driver to hip08 family of SoCs. This driver includes basic Rx/Tx functionality. It also includes the client registration code with the HNAE3(Hisilicon Network Acceleration Engine 3) framework. This work provides the initial support to the hip08 SoC and would incrementally add features or enhancements. Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: remove typedefs from structures part 4 As we know, typedef is suggested not to use in kernel, even checkpatch.pl also gives warnings about it. Now sctp is using it for many structures. All this kind of typedef's using should be removed. This patchset is the part 4 to remove it for another 14 basic structures from linux/sctp.h. After this patchset, all typedefs are cleaned in linux/sctp.h. Just as the part 1-3, No any code's logic would be changed in these patches, only cleaning up. ==================== Signed-off-by: -
Xin Long authored
This patch is to remove the typedef sctp_auth_chunk_t, and replace with struct sctp_auth_chunk in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_authhdr_t, and replace with struct sctp_authhdr in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_addip_chunk_t, and replace with struct sctp_addip_chunk in the places where it's using this typedef. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_addiphdr_t, and replace with struct sctp_addiphdr in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_addip_param_t, and replace with struct sctp_addip_param in the places where it's using this typedef. It is to use sizeof(variable) instead of sizeof(type), and also fix some indent problems. Signed-off-by:
-
Xin Long authored
Remove this typedef including the struct, there is even no places using it. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_cwrhdr_t, and replace with struct sctp_cwrhdr in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_ecne_chunk_t, and replace with struct sctp_ecne_chunk in the places where it's using this typedef. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_ecnehdr_t, and replace with struct sctp_ecnehdr in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_error_t, and replace with enum sctp_error in the places where it's using this typedef. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_operr_chunk_t, and replace with struct sctp_operr_chunk in the places where it's using this typedef. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_errhdr_t, and replace with struct sctp_errhdr in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by:
-
