- 23 May, 2019 40 commits
-
-
Dave Ertman authored
When disabling and enabling VSIs, there are a couple of flows that recursively acquire the RTNL lock which causes a deadlock. Fix that. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anirudh Venkataramanan authored
ice_parse_caps is used to parse both device and function capabilities. Currently, capabilities are printed with a cryptic "HW caps" prefix, which makes it difficult to distinguish whether the capabilities being printed are device or function capabilities. This patch makes a change to add a "func cap" prefix when printing function capabilities, and a "dev cap" prefix when printing device capabilities. This patch also changes some of the capability print strings for consistency. Signed-off-by:
-
Anirudh Venkataramanan authored
Fix checkpatch warning "WARNING:BRACES: braces {} are not necessary for single statement blocks" Signed-off-by: -
Bruce Allan authored
Commit 3463688e6ced ("ice: Add more validation in ice_vc_cfg_irq_map_msg") added an assignment of vsi making the assignment during declaration unnecessary. Also, cleanup the declaration and assignment of irqmap_info to not use two lines in the variable declaration section. Signed-off-by:Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
-
Anirudh Venkataramanan authored
Implement LLDP persistence across reboots, start and stop of LLDP agent. Add additional parameter to ice_aq_start_lldp and ice_aq_stop_lldp. Also change the ethtool private flag from "disable-fw-lldp" to "enable-fw-lldp". This change will flip the boolean logic of the functionality of the flag (on = enable, off = disable). The change in name and functionality is to differentiate between the pre-persistence and post-persistence states. Signed-off-by:
-
Anirudh Venkataramanan authored
Fix double spacing in ice_napi_disable_all Signed-off-by:
-
Ioana Radulescu authored
This reverts commit f8b99585. The reverted change instructed the QMan hardware block to fetch RX frame annotation and beginning of frame data to cache before the core would read them. It turns out that in rare cases, it's possible that a QMan stashing transaction is delayed long enough such that, by the time it gets executed, the frame in question had already been dequeued by the core and software processing began on it. If the core manages to unmap the frame buffer _before_ the stashing transaction is executed, an SMMU exception will be raised. Unfortunately there is no easy way to work around this while keeping the performance advantages brought by QMan stashing, so disable it altogether. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Raju Rangoju authored
Adds support for validating hardware filter spec configured in firmware before offloading exact match flows. Use the new fw api FW_PARAM_DEV_FILTER_MODE_MASK to read the filter mode and mask from firmware. If the api isn't supported, then fall-back to older way of reading just the mode from indirect register. Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
-
David S. Miller authored
Esben Haabendal says: ==================== net: ll_temac: Fix and enable multicast support This patch series makes the necessary fixes to ll_temac driver to make multicast work, and enables support for it.so that multicast support can The main change is the change from mutex to spinlock of the lock used to synchronize access to the shared indirect register access. ==================== Signed-off-by: -
Esben Haabendal authored
Multicast support have been tested and is working now. Signed-off-by:
Esben Haabendal <esben@geanix.com> Signed-off-by:
-
Esben Haabendal authored
Avoid leaving old address table entries when using multicast. If more than one multicast address were removed, only the first removed address would actually be cleared. Signed-off-by:
-
Esben Haabendal authored
With .ndo_set_rx_mode/temac_set_multicast_list() being called in atomic context (holding addr_list_lock), and temac_set_multicast_list() needing to access temac indirect registers, the mutex used to synchronize indirect register is a no-no. Replace it with a spinlock, and avoid sleeping in temac_indirect_busywait(). To avoid excessive holding of the lock, which is now a spinlock, the temac_device_reset() function is changed to only hold the lock for short periods. With timeouts, it could be holding the spinlock for more than 2 seconds. Signed-off-by:
-
Esben Haabendal authored
When user has requested IFF_ALLMULTI or have set more than 4 multicast addresses, we should just use promiscuous mode, but not set it in flags, as it causes the interface to stay in promiscuous mode even when the non-IFF_PROMISC condition that caused promiscuous mode to be enabled has gone away. Signed-off-by:
-
Christophe Leroy authored
All LXT PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions added by commit 0f0ca340 ("phy: power management support"). LXT970 is left aside because all registers get cleared upon "power down" exit. Reviewed-by:Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jiri Pirko authored
Prevent misbehavior of drivers who would not set port type for longer period of time. Drivers should always set port type. Do WARN if that happens. Note that it is perfectly fine to temporarily not have the type set, during initialization and port type change. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Sunil Muthuswamy authored
Currently, the hv_sock send() iterates once over the buffer, puts data into the VMBUS channel and returns. It doesn't maximize on the case when there is a simultaneous reader draining data from the channel. In such a case, the send() can maximize the bandwidth (and consequently minimize the cpu cycles) by iterating until the channel is found to be full. Perf data: Total Data Transfer: 10GB/iteration Single threaded reader/writer, Linux hvsocket writer with Windows hvsocket reader Packet size: 64KB CPU sys time was captured using the 'time' command for the writer to send 10GB of data. 'Send Buffer Loop' is with the patch applied. The values below are over 10 iterations. |--------------------------------------------------------| | | Current | Send Buffer Loop | |--------------------------------------------------------| | | Throughput | CPU sys | Throughput | CPU sys | | | (MB/s) | time (s) | (MB/s) | time (s) | |--------------------------------------------------------| | Min | 407 | 7.048 | 401 | 5.958 | |--------------------------------------------------------| | Max | 455 | 7.563 | 542 | 6.993 | |--------------------------------------------------------| | Avg | 440 | 7.411 | 451 | 6.639 | |--------------------------------------------------------| | Median | 446 | 7.417 | 447 | 6.761 | |--------------------------------------------------------| Observation: 1. The avg throughput doesn't really change much with this change for this scenario. This is most probably because the bottleneck on throughput is somewhere else. 2. The average system (or kernel) cpu time goes down by 10%+ with this change, for the same amount of data transfer. Signed-off-by:
Sunil Muthuswamy <sunilmut@microsoft.com> Reviewed-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Sunil Muthuswamy authored
Currently, the hv_sock buffer size is static and can't scale to the bandwidth requirements of the application. This change allows the applications to influence the socket buffer sizes using the SO_SNDBUF and the SO_RCVBUF socket options. Few interesting points to note: 1. Since the VMBUS does not allow a resize operation of the ring size, the socket buffer size option should be set prior to establishing the connection for it to take effect. 2. Setting the socket option comes with the cost of that much memory being reserved/allocated by the kernel, for the lifetime of the connection. Perf data: Total Data Transfer: 1GB Single threaded reader/writer Results below are summarized over 10 iterations. Linux hvsocket writer + Windows hvsocket reader: |---------------------------------------------------------------------------------------------| |Packet size -> | 128B | 1KB | 4KB | 64KB | |---------------------------------------------------------------------------------------------| |SO_SNDBUF size | | Throughput in MB/s (min/max/avg/median): | | v | | |---------------------------------------------------------------------------------------------| | Default | 109/118/114/116 | 636/774/701/700 | 435/507/480/476 | 410/491/462/470 | | 16KB | 110/116/112/111 | 575/705/662/671 | 749/900/854/869 | 592/824/692/676 | | 32KB | 108/120/115/115 | 703/823/767/772 | 718/878/850/866 | 1593/2124/2000/2085 | | 64KB | 108/119/114/114 | 592/732/683/688 | 805/934/903/911 | 1784/1943/1862/1843 | |---------------------------------------------------------------------------------------------| Windows hvsocket writer + Linux hvsocket reader: |---------------------------------------------------------------------------------------------| |Packet size -> | 128B | 1KB | 4KB | 64KB | |---------------------------------------------------------------------------------------------| |SO_RCVBUF size | | Throughput in MB/s (min/max/avg/median): | | v | | |---------------------------------------------------------------------------------------------| | Default | 69/82/75/73 | 313/343/333/336 | 418/477/446/445 | 659/701/676/678 | | 16KB | 69/83/76/77 | 350/401/375/382 | 506/548/517/516 | 602/624/615/615 | | 32KB | 62/83/73/73 | 471/529/496/494 | 830/1046/935/939 | 944/1180/1070/1100 | | 64KB | 64/70/68/69 | 467/533/501/497 | 1260/1590/1430/1431 | 1605/1819/1670/1660 | |---------------------------------------------------------------------------------------------| Signed-off-by:
-
Eric Dumazet authored
Removing two 4 bytes holes allows to use kmalloc-32 kmem cache instead of kmalloc-64 on 64bit kernels. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David Ahern authored
Add tracepoint to __neigh_create to enable debugging of new entries. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
The point of the pause-on-fail argument is to leave the setup as is after a test fails to allow a user to debug why it failed. Move the cleanup after posting the result to the user to make it so. Random names for the namespaces are not user friendly when trying to debug a failure. Make them simpler and more direct for the tests. Run cleanup at the beginning to ensure they are cleaned up if they already exist. Remove cleanup_done. There is no harm in doing cleanup twice; just ignore any errors related to not existing - which is already done. Signed-off-by:
-
David Ahern authored
Add VERBOSE argument to fib-onlink-tests.sh and make output quiet by default. Add getopt parsing of inputs and support for -v (verbose) and -p (pause on fail). Signed-off-by:
-
David Ahern authored
New userspace on an older kernel can send unknown and unsupported attributes resulting in an incompelete config which is almost always wrong for routing (few exceptions are passthrough settings like the protocol that installed the route). Set strict_start_type in the policies for IPv4 and IPv6 routes and rules to detect new, unsupported attributes and fail the route add. Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: Export functions for nexthop code This set exports ipv4 and ipv6 fib functions for use by the nexthop code. It also adds new ones to send route notifications if a nexthop configuration changes. v2 - repost of patches dropped at the end of the last dev window added patch 8 which exports nh_update_mtu since it is inline with the other patches ==================== Signed-off-by: -
David Ahern authored
Rename nh_update_mtu to fib_nhc_update_mtu and export for use by the nexthop code. Signed-off-by:
-
David Ahern authored
Add scope as input argument versus relying on fib_info reference in fib_nh, and export fib_info_update_nh_saddr. Signed-off-by:
-
David Ahern authored
As nexthops are deleted, fib entries referencing it are marked dead. Export fib_flush so those entries can be removed in a timely manner. Signed-off-by:
-
David Ahern authored
Change fib_check_nh to take net, table and scope as input arguments over struct fib_config and export for use by nexthop code. Signed-off-by:
-
David Ahern authored
Add fib_info_notify_update to walk the fib and send RTM_NEWROUTE notifications with NLM_F_REPLACE set for entries linked to a fib_info that have nh_updated flag set. This helper will be used by the nexthop code to notify userspace of routes that are impacted when a nexthop config is updated via replace. The new function and its helper are similar to how fib_flush and fib_table_flush work for address delete and link down events. This notification is needed for legacy apps that do not understand the new nexthop object. Apps that are nexthop aware can use the RTA_NH_ID attribute in the route notification to just ignore it. In the future this should be wrapped in a sysctl to allow OS'es that are fully updated to avoid the notificaton storm. Signed-off-by:
-
David Ahern authored
Add fib6_rt_update to send RTM_NEWROUTE with NLM_F_REPLACE set. This helper will be used by the nexthop code to notify userspace of routes that are impacted when a nexthop config is updated via replace. This notification is needed for legacy apps that do not understand the new nexthop object. Apps that are nexthop aware can use the RTA_NH_ID attribute in the route notification to just ignore it. In the future this should be wrapped in a sysctl to allow OS'es that are fully updated to avoid the notificaton storm. Signed-off-by:
-
David Ahern authored
Add hook to ipv6 stub to bump the sernum up to the root node for a route. This is needed by the nexthop code when a nexthop config changes. Signed-off-by:
-
David Ahern authored
Add ip6_del_rt to the IPv6 stub. The hook is needed by the nexthop code to remove entries linked to a nexthop that is getting deleted. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== net: phy: T1 support T1 PHYs make use of a single twisted pair, rather than the traditional 2 pair for 100BaseT or 4 pair for 1000BaseT. This patchset adds link modes for 100BaseT1 and 1000BaseT1, and them makes use of 100BaseT1 in the list of PHY features used by current T1 drivers. ==================== Signed-off-by: -
Andrew Lunn authored
Now that there is a link mode for 100BaseT1, use it in phy_basic_t1_features so T1 PHY drivers will indicate this mode via the Ethtool API. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
Add link modes for 100Mbps and 1Gbps over a single pair. Signed-off-by:
-
Trent Piepho authored
This was being done in config the first time the phy was configured. Should be in the probe method. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Trent Piepho <tpiepho@impinj.com> Reviewed-by:
-
Trent Piepho authored
Insure property is in valid range and fail when reading DT if it is not. Also add error message for existing failure if required property is not present. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Trent Piepho authored
The driver would only set the IO impedance value when RGMII internal delays were enabled. There is no reason for this. Move the IO impedance block out of the RGMII delay block. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Trent Piepho authored
The variables used to store u32 DT properties were signed ints. This doesn't work properly if the value of the property were to overflow. Use unsigned variables so this doesn't happen. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Trent Piepho authored
The code was assuming the reset default of the delay control register was to have delay disabled. This is what the datasheet shows as the register's initial value. However, that's not actually true: the default is controlled by the PHY's pin strapping. If the interface mode is selected as RX or TX delay only, insure the other direction's delay is disabled. If the interface mode is just "rgmii", with neither TX or RX internal delay, one might expect that the driver should disable both delays. But this is not what the driver does. It leaves the setting at the PHY's strapping's default. And that default, for no pins with strapping resistors, is to have delay enabled and 2.00 ns. Rather than change this behavior, I've kept it the same and documented it. No delay will most likely not work and will break ethernet on any board using "rgmii" mode. If the board is strapped to have a delay and is configured to use "rgmii" mode a warning is generated that "rgmii-id" should have been used. Also validate the delay values and fail if they are not in range. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Trent Piepho authored
Generally, the output clock pin is only used for testing and only serves as a source of RF noise after this. It could be used to daisy-chain PHYs, but this is uncommon. Since the PHY can disable the output, make doing so an option. I do this by adding another enumeration to the allowed values of ti,clk-output-sel. The code was not using the value DP83867_CLK_O_SEL_REF_CLK as one might expect: to select the REF_CLK as the output. Rather it meant "keep clock output setting as is", which, depending on PHY strapping, might not be outputting REF_CLK. Change this so DP83867_CLK_O_SEL_REF_CLK means enable REF_CLK output. Omitting the property will leave the setting as is (which was the previous behavior in this case). Out of range values were silently converted into DP83867_CLK_O_SEL_REF_CLK. Change this so they generate an error. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
