- 15 Jun, 2023 31 commits
-
-
Tim Huang authored
PMFW use the left-shifted 16 bits argument to set the VCLK DPM frequency for SMU v13.0.5. Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
Aric Cyr authored
This version brings along following fixes: - Improvement on eDP - PSR bug fixes - SubVP bug fixes - Improvements on pipe handling to address potential issues - Freesync bug fix - DPIA bug fix - Fix multi-display issues Acked-by:
Stylon Wang <stylon.wang@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Dmytro Laktyushkin authored
The k1/k2 pixel rate dividers in dccg should only be updated on stream enable and do not actually depend on whether odm combine is active. This removes an on flip update of these and fixes the calculate function to ignore odm status for dp steams. Acked-by:
Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Reviewed-by:
Ariel Bernstein <Eric.Bernstein@amd.com> Tested-by:
-
Samson Tam authored
Revert commit 5f3401ee ("drm/amd/display: reallocate DET for dual displays with high pixel rate ratio") [Why] Previously had modified DET allocation algorithm to allocate less DET segments for lower pixel rate display and more DET segments for higher pixel rate display. But noticed it is causing underflow when higher pixel rate display is not displaying at higher mode [How] Roll back change Acked-by:
Samson Tam <samson.tam@amd.com> Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
-
Peichen Huang authored
[Why] DPIA doesn't support UHBR, driver should not enable UHBR for dp tunneling [How] limit DPIA link rate to HBR3 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by:
Peichen Huang <peichen.huang@amd.com> Reviewed-by:
Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Tested-by:
-
Alvin Lee authored
[Description] - Missed color / CSC updates in fast update path which caused Custom Color to break. - Add color / CSC updates to new fast update path to fix custom color Acked-by:
Jun Lei <jun.lei@amd.com> Tested-by:
-
Austin Zheng authored
Why: Some EDIDs report a minimum refresh rate lower than what HW can support How: Add a check to calculate minimum supported refresh rate with current timing and use that as the minimum if a lower one is passed in Acked-by:
Austin Zheng <austin.zheng@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Artem Grishin authored
[Why] When iterating over all pipes in the loop, the CRB allocation algorithm may potentially skip some of the pipes. Previously, the current pipe index didn't get updated in this case, causing incorrect outcome. [How] Increment the pipe index when skipping over a pipe in the loop. Acked-by:
Artem Grishin <artem.grishin@amd.com> Reviewed-by:
-
Alvin Lee authored
[Description] PSR implementation in FW has inline polling which can poll for up to 1ms. This will interfere with SubVP because SubVP is timing sensitive and can't tolerate up to 1ms worth of delay before handling vertical or VLINE interrupts. Therefore block SubVP + DRR cases if DRR is PSR capable Acked-by:
Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by:
-
Saaem Rizvi authored
[Why and How] We should not disable phantom pipes in this sequence, as this should be controlled by FW. Furthermore, the previous programming sequence would have enabled the phantom pipe in driver as well, causing corruption. This change should avoid this from occuring. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by:
-
Alvin Lee authored
Re-enable SubVP high refresh now that it is fixed for displays with high refresh rates. Acked-by:
-
Daniel Miess authored
[Why & How] Bugs preventing DPP/HUBP power gating have been addressed so this should be reenabled on dcn314 for sufficient hardware rev versions Acked-by:
Daniel Miess <daniel.miess@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Alvin Lee authored
[Description] - SubVP high refresh should only be enabled if all displays are >= 120hz. We do not want to accidentally enables configs such as 60hz[SubVP] + 120hz[SubVP] - Ensure that the SubVP config generation code does not produce configs such as 60hz[SubVP] + 120hz[SubVP] - Also add admissibility checks to ensure these configs do not pass as valid configs Acked-by:
Dillon Varone <Dillon.Varone@amd.com> Tested-by:
-
Tom Chung authored
[Why] dmub_psr_get_state() return an invalid PSR state while disable the PSR because convert_psr_state() doesn't recognize the state that return from DMCUB. [How] Add a PSR state to make the dmub_psr_get_state() return a correct PSR state. Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Reviewed-by:
Wayne Lin <Wayne.Lin@amd.com> Tested-by:
-
Tom Chung authored
[Why] When the PSR enabled. If you try to adjust the timing parameters, it may cause system hang. Because the timing mismatch with the DMCUB settings. [How] Disable the PSR before adjusting timing parameters. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by:
-
Aric Cyr authored
Acked-by:
-
Fangzhi Zuo authored
Any invalid mode from hw perspective should be given corresponding error code, otherwise it leads to confusing warning message "[drm] Mode Validation Warning: Validation OK failed validation." Acked-by:
Fangzhi Zuo <jerry.zuo@amd.com> Reviewed-by:
-
Austin Zheng authored
Why: Log DP2 data to be used for debugging purposes How: Check the reported link rate of the DP connection and translate it to the DP version. Acked-by:
Martin Leung <Martin.Leung@amd.com> Tested-by:
-
Hersen Wu authored
[Why] within dc_link_detect, edp edid is read only for the first time and saved. edid will not be read after the first time read. to run edp edid read test, need read edp edid for each dc_link_detect. dc->config flag allow_edp_hotplug_detection could be used for edp edid test. [How] add debugfs for dc->config.allow_edp_hotplug_detection Acked-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Hersen Wu authored
[Why] most edp support only timings from edid. applying non-edid timings, especially those timings out of edp bandwidth, may damage edp. [How] do not add non-edid timings for edp. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by:
Roman Li <roman.li@amd.com> Tested-by:
-
Arunpravin Paneer Selvam authored
This reverts commit c1055186. This patch disables the TOPDOWN flag for APU and few dGPU cards which has the VRAM size equal to the BAR size. When we enable the TOPDOWN flag, we get the free blocks at the highest available memory region and we don't split the lower order blocks. This change is required to keep off the fragmentation related issues particularly in ASIC which has VRAM space <= 500MiB Hence, we are reverting this patch. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2270Signed-off-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Shiwu Zhang authored
Add these two dev attrs for xgmi info details which is helpful for developers checking the xgmi topology by catting the sys file directly. Take 4 cards with xgmi connection as an example, get the num_hops for each device or node through xmig_hive_info dir like, cat /sys/bus/pci/devices/0000:41:00.0/xgmi_hive_info/node1/num_hops will return "00 41 41 41" where "00" stands for the hops to node1 itself and "41" is the hops in hex format to every other node in the same hive. There are node1/node2/node3/node4 representing 4 cards in the hive. The same for num_links dev attr. Signed-off-by:
Shiwu Zhang <shiwu.zhang@amd.com> Acked-by:
Le Ma <le.ma@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Sonny Jiang authored
Only vcn0 can process AV1 codecx. In order to use both vcn0 and vcn1 in h264/265 transcode to AV1 cases, set vcn0 sched score to 1 at initialization time. Signed-off-by:
Sonny Jiang <sonjiang@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Thomas Zimmermann authored
Disable the modesetting pipeline before release the radeon's fbdev client. Fixes the following error: [ 17.217408] WARNING: CPU: 5 PID: 1464 at drivers/gpu/drm/ttm/ttm_bo.c:326 ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217418] Modules linked in: edac_mce_amd radeon(+) drm_ttm_helper ttm video drm_suballoc_helper drm_display_helper kvm irqbypass drm_kms_helper syscopyarea crc32_pclmul sysfillrect sha512_ssse3 sysimgblt sha512_generic cfbfillrect cfbimgblt wmi_bmof aesni_intel cfbcopyarea crypto_simd cryptd k10temp acpi_cpufreq wmi dm_mod [ 17.217432] CPU: 5 PID: 1464 Comm: systemd-udevd Not tainted 6.4.0-rc4+ #1 [ 17.217436] Hardware name: Micro-Star International Co., Ltd. MS-7A38/B450M PRO-VDH MAX (MS-7A38), BIOS B.G0 07/26/2022 [ 17.217438] RIP: 0010:ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217444] Code: 48 89 43 38 48 89 43 40 48 8b 5c 24 30 48 8b b5 40 08 00 00 48 8b 6c 24 38 48 83 c4 58 e9 7a 49 f7 e0 48 89 ef e9 6c fe ff ff <0f> 0b 48 83 7b 20 00 0f 84 b7 fd ff ff 0f 0b 0f 1f 00 e9 ad fd ff [ 17.217448] RSP: 0018:ffffc9000095fbb0 EFLAGS: 00010202 [ 17.217451] RAX: 0000000000000001 RBX: ffff8881052c8de0 RCX: 0000000000000000 [ 17.217453] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881052c8de0 [ 17.217455] RBP: ffff888104a66e00 R08: ffff8881052c8de0 R09: ffff888104a7cf08 [ 17.217457] R10: ffffc9000095fbe0 R11: ffffc9000095fbe8 R12: ffff8881052c8c78 [ 17.217458] R13: ffff8881052c8c78 R14: dead000000000100 R15: ffff88810528b108 [ 17.217460] FS: 00007f319fcbb8c0(0000) GS:ffff88881a540000(0000) knlGS:0000000000000000 [ 17.217463] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.217464] CR2: 000055dc8b0224a0 CR3: 000000010373d000 CR4: 0000000000750ee0 [ 17.217466] PKRU: 55555554 [ 17.217468] Call Trace: [ 17.217470] <TASK> [ 17.217472] ? __warn+0x97/0x160 [ 17.217476] ? ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217481] ? report_bug+0x1ec/0x200 [ 17.217487] ? handle_bug+0x3c/0x70 [ 17.217490] ? exc_invalid_op+0x1f/0x90 [ 17.217493] ? preempt_count_sub+0xb5/0x100 [ 17.217496] ? asm_exc_invalid_op+0x16/0x20 [ 17.217500] ? ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217505] ? ttm_resource_move_to_lru_tail+0x1ab/0x1d0 [ttm] [ 17.217511] radeon_bo_unref+0x1a/0x30 [radeon] [ 17.217547] radeon_gem_object_free+0x20/0x30 [radeon] [ 17.217579] radeon_fbdev_fb_destroy+0x57/0x90 [radeon] [ 17.217616] unregister_framebuffer+0x72/0x110 [ 17.217620] drm_client_dev_unregister+0x6d/0xe0 [ 17.217623] drm_dev_unregister+0x2e/0x90 [ 17.217626] drm_put_dev+0x26/0x90 [ 17.217628] pci_device_remove+0x44/0xc0 [ 17.217631] really_probe+0x257/0x340 [ 17.217635] __driver_probe_device+0x73/0x120 [ 17.217638] driver_probe_device+0x2c/0xb0 [ 17.217641] __driver_attach+0xa0/0x150 [ 17.217643] ? __pfx___driver_attach+0x10/0x10 [ 17.217646] bus_for_each_dev+0x67/0xa0 [ 17.217649] bus_add_driver+0x10e/0x210 [ 17.217651] driver_register+0x5c/0x120 [ 17.217653] ? __pfx_radeon_module_init+0x10/0x10 [radeon] [ 17.217681] do_one_initcall+0x44/0x220 [ 17.217684] ? kmalloc_trace+0x37/0xc0 [ 17.217688] do_init_module+0x64/0x240 [ 17.217691] __do_sys_finit_module+0xb2/0x100 [ 17.217694] do_syscall_64+0x3b/0x90 [ 17.217697] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 17.217700] RIP: 0033:0x7f319feaa5a9 [ 17.217702] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 08 0d 00 f7 d8 64 89 01 48 [ 17.217706] RSP: 002b:00007ffc6bf3e7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 17.217709] RAX: ffffffffffffffda RBX: 00005607204f3170 RCX: 00007f319feaa5a9 [ 17.217710] RDX: 0000000000000000 RSI: 00007f31a002eefd RDI: 0000000000000018 [ 17.217712] RBP: 00007f31a002eefd R08: 0000000000000000 R09: 00005607204f1860 [ 17.217714] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000020000 [ 17.217716] R13: 0000000000000000 R14: 0000560720522450 R15: 0000560720255899 [ 17.217718] </TASK> [ 17.217719] ---[ end trace 0000000000000000 ]--- The buffer object backing the fbdev emulation got pinned twice: by the fb_probe helper radeon_fbdev_create_pinned_object() and the modesetting code when the framebuffer got displayed. It only got unpinned once by the fbdev helper radeon_fbdev_destroy_pinned_object(). Hence TTM's BO- release function complains about the pin counter. Forcing the outputs off also undoes the modesettings pin increment. Tested-by:
Borislav Petkov (AMD) <bp@alien8.de> Reported-by:
Thomas Zimmermann <tzimmermann@suse.de> Fixes: e317a69f ("drm/radeon: Implement client-based fbdev emulation") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: amd-gfx@lists.freedesktop.org Signed-off-by:
-
Hamza Mahfooz authored
We have a clean build with W=1 as of commit c168feed ("drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move SYNAPTICS_DEVICE_ID into CONFIG_DRM_AMD_DC_DCN ifdef"). So, let's enable these checks unconditionally for the entire module to catch these errors during development. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nathan Chancellor <nathan@kernel.org> Tested-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c:76: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * EEPROM Table structure v1 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c:98: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * EEPROM Table structrue v2.1 Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by:
-
Daniel Miess authored
[Why and How] Add back debug bits enabling RCO for dcn314 as underflow associated with this change has been resolved Acked-by:
-
Mukul Joshi authored
Rename mman.entity to mman.high_pr to make the distinction clearer that this is a high priority scheduler. Similarly, rename the recently added mman.delayed to mman.low_pr to make it clear it is a low priority scheduler. No functional change in this patch. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
Lee Jones authored
drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move SYNAPTICS_DEVICE_ID into CONFIG_DRM_AMD_DC_DCN ifdef Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:48:22: warning: ‘SYNAPTICS_DEVICE_ID’ defined but not used [-Wunused-const-variable=] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Lee Jones <lee@kernel.org> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Hardware implements root clock gating by utilizing the DPP DTO registers with a special case of DTO enabled, phase = 0, modulo = 1. This conflicts with our policy to always update the DPPDTO for cases where it's expected to be disabled. The pipes unexpectedly enter a higher power state than expected because of this programming flow. [How] Guard the upper layers of HWSS against this hardware quirk with programming the register with an internal state flag in DCCG. While technically acting as global state for the DCCG, HWSS shouldn't be expected to understand the hardware quirk for having DTO disabled causing more power than DTO enabled with this specific setting. This also prevents sequencing errors from occuring in the future if we have to program DPP DTO in multiple locations. Acked-by:
-
https://gitlab.freedesktop.org/agd5f/linuxDave Airlie authored
amd-drm-next-6.5-2023-06-02: amdgpu: - SR-IOV fixes - Warning fixes - Misc code cleanups and spelling fixes - DCN 3.2 updates - Improved DC FAMS support for better power management - Improved DC SubVP support for better power management - DCN 3.1.x fixes - Max IB size query - DC GPU reset fixes - RAS updates - DCN 3.0.x fixes - S/G display fixes - CP shadow buffer support - Implement connector force callback - Z8 power improvements - PSP 13.0.10 vbflash support - Mode2 reset fixes - Store MQDs in VRAM to improve queue switch latency - VCN 3.x fixes - JPEG 3.x fixes - Enable DC_FP on LoongArch - GFXOFF fixes - GC 9.4.3 partition support - SDMA 4.4.2 partition support - VCN/JPEG 4.0.3 partition support - VCN 4.0.3 updates - NBIO 7.9 updates - GC 9.4.3 updates - Take NUMA into account when allocating memory - Handle NUMA for partitions - SMU 13.0.6 updates - GC 9.4.3 RAS updates - Stop including unused swiotlb.h - SMU 13.0.7 fixes - Fix clock output ordering on some APUs - Clean up DC FPGA code - GFX9 preemption fixes - Misc irq fixes - S0ix fixes - Add new DRM_AMDGPU_WERROR config parameter to help with CI - PCIe fix for RDNA2 - kdoc fixes - Documentation updates amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions radeon: - Fix possible double free - Stop including unused swiotlb.h - Fix possible division by zero ttm: - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() UAPI: - Add new ctx query flag to better handle GPU resets Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 - Add new interface to query and set shadow buffer for RDNA3 Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986 - Add new INFO query for max IB size Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3 amd-drm-next-6.5-2023-06-09: amdgpu: - S0ix fixes - Initial SMU13 Overdrive support - kdoc fixes - Misc clode cleanups - Flexible array fixes - Display OTG fixes - SMU 13.0.6 updates - Revert some broken clock counter updates - Misc display fixes - GFX9 preemption fixes - Add support for newer EEPROM bad page table format - Add missing radeon secondary id - Add support for new colorspace KMS API - CSA fix - Stable pstate fixes for APUs - make vbl interface admin only - Handle PCI accelerator class amdkfd: - Add debugger support for gdb radeon: - Fix possible UAF drm: - Add Colorspace functionality UAPI: - Add debugger interface for enabling gdb Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi - Add KMS colorspace API Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
-
- 09 Jun, 2023 9 commits
-
-
Austin Zheng authored
Why: Limit maximum clock speeds to DC mode limits for DC mode systems How: Store DC mode limits when individual clocks are initialized and cap the values when building the clock table Acked-by:
-
Sridevi authored
[Why] Programming register delta for DSC sub-block [How] Change DSC, resource files for programming register delta. Acked-by:
Sridevi <sarvinde@amd.com> Reviewed-by:
Chris Park <Chris.Park@amd.com> Tested-by:
-
Leo Ma authored
Revert commit 257e9891 ("drm/amd/display: cache trace buffer size") to fix regression found in tests. Acked-by:
Leo Ma <hanghong.ma@amd.com> Reviewed-by:
Josip Pavic <Josip.Pavic@amd.com> Tested-by:
-
Kenneth Feng authored
On smu 13.0.0, the compute workload type cannot be set on all the skus due to some other problems. This workaround is to make sure compute workload type can also run on some specific skus. v2: keep the variable consistent Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Acked-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Charlene Liu authored
[why] check dmub_Srv exist or not before accessing dmub. Acked-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Zhan Liu <Zhan.Liu@amd.com> Tested-by:
-
shikaguo authored
This patch enables following UMD stable Pstates profile levels for power_dpm_force_performance_level interface. - profile_peak - profile_min_mclk - profile_min_sclk - profile_standard Signed-off-by:
shikaguo <shikai.guo@amd.com> Reviewed-by:
-
Chong Li authored
enforce process isolation between graphics and compute via using the same reserved vmid. v2: remove params "struct amdgpu_vm *vm" from amdgpu_vmid_alloc_reserved and amdgpu_vmid_free_reserved. Signed-off-by:Chong Li <chongli2@amd.com> Reviewed-by:
-
Nathan Chancellor authored
-Wunused-but-set-variable was only supported in clang starting with 13.0.0, so earlier versions will emit a warning, which is turned into a hard error for the kernel to mirror GCC: error: unknown warning option '-Wunused-but-set-variable'; did you mean '-Wunused-const-variable'? [-Werror,-Wunknown-warning-option] The minimum supported version of clang for building the kernel is 11.0.0, so match the rest of the kernel and wrap -Wunused-but-set-variable in a cc-option call, so that it is only used when supported by the compiler. Closes: https://github.com/ClangBuiltLinux/linux/issues/1869 Fixes: 1b320ad3 ("drm/amd/amdgpu: introduce DRM_AMDGPU_WERROR") Signed-off-by:
-
Shiwu Zhang authored
Add the accelerator PCIe class and match the class in amdgpu for 0x1002 devices of that class. From PCI spec: "PCI Code and ID Assignment, r1.9, sec 1, 1.19" Signed-off-by:
-
