Skip to content

L
linux
Switch branch/tag
  1. 26 Jul, 2024 4 commits
    • Kiran K's avatar
      Bluetooth: btintel: Fail setup on error · e22a3a9d
      Kiran K authored 
      Do not attempt to send any hci command to controller if *setup* function
fails.

Fixes: af395330 ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: default avatarKiran K <kiran.k@intel.com>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      e22a3a9d
    • Mark Mentovai's avatar
      net: phy: realtek: add support for RTL8366S Gigabit PHY · 225990c4
      Mark Mentovai authored 
      The PHY built in to the Realtek RTL8366S switch controller was
previously supported by genphy_driver. This PHY does not implement MMD
operations. Since commit 9b01c885 ("net: phy: c22: migrate to
genphy_c45_write_eee_adv()"), MMD register reads have been made during
phy_probe to determine EEE support. For genphy_driver, these reads are
transformed into 802.3 annex 22D clause 45-over-clause 22
mmd_phy_indirect operations that perform MII register writes to
MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers,
which on this PHY are reserved and have another function, rendering the
PHY unusable while so configured.

Proper support for this PHY is restored by providing a phy_driver that
declares MMD operations as unsupported by using the helper functions
provided for that purpose, while remaining otherwise identical to
genphy_driver.

Fixes: 9b01c885 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()")
Reported-by: default avatarRussell Senior <russell@personaltelco.net>
Closes: https://github.com/openwrt/openwrt/issues/15981
Link: https://github.com/openwrt/openwrt/issues/15739Signed-off-by: default avatarMark Mentovai <mark@mentovai.com>
Reviewed-by: default avatarMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      225990c4
    • Eric Dumazet's avatar
      sched: act_ct: take care of padding in struct zones_ht_key · 2191a54f
      Eric Dumazet authored 
      Blamed commit increased lookup key size from 2 bytes to 16 bytes,
because zones_ht_key got a struct net pointer.

Make sure rhashtable_lookup() is not using the padding bytes
which are not initialized.

 BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline]
 BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline]
 BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
 BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
 BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329
  rht_ptr_rcu include/linux/rhashtable.h:376 [inline]
  __rhashtable_lookup include/linux/rhashtable.h:607 [inline]
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
  tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329
  tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408
  tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425
  tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488
  tcf_action_add net/sched/act_api.c:2061 [inline]
  tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118
  rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647
  netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550
  rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665
  netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
  netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357
  netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  ____sys_sendmsg+0x877/0xb60 net/socket.c:2597
  ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651
  __sys_sendmsg net/socket.c:2680 [inline]
  __do_sys_sendmsg net/socket.c:2689 [inline]
  __se_sys_sendmsg net/socket.c:2687 [inline]
  __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687
  x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Local variable key created at:
  tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324
  tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408

Fixes: 88c67aeb ("sched: act_ct: add netns into the key of tcf_ct_flow_table")
Reported-by: syzbot+1b5e4e187cc586d05ea0@syzkaller.appspotmail.com
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Reviewed-by: default avatarXin Long <lucien.xin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2191a54f
    • Ma Ke's avatar
      net: usb: sr9700: fix uninitialized variable use in sr_mdio_read · 08f3a5c3
      Ma Ke authored 
      It could lead to error happen because the variable res is not updated if
the call to sr_share_read_word returns an error. In this particular case
error code was returned and res stayed uninitialized. Same issue also
applies to sr_read_reg.

This can be avoided by checking the return value of sr_share_read_word
and sr_read_reg, and propagating the error if the read operation failed.

Found by code review.

Cc: stable@vger.kernel.org
Fixes: c9b37458 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: default avatarMa Ke <make24@iscas.ac.cn>
Reviewed-by: default avatarShigeru Yoshida <syoshida@redhat.com>
Reviewed-by: default avatarHariprasad Kelam <hkelam@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      08f3a5c3
  3. 25 Jul, 2024 29 commits
  5. 24 Jul, 2024 7 commits
    • Linus Torvalds's avatar
      Merge tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy · c33ffdb7
      Linus Torvalds authored 
      Pull phy updates from Vinod Koul:
 "New Support
   - Samsung Exynos gs101 drd combo phy
   - Qualcomm SC8180x USB uniphy, IPQ9574 QMP PCIe phy
   - Airoha EN7581 PCIe phy
   - Freescale i.MX8Q HSIO SerDes phy
   - Starfive jh7110 dphy tx

  Updates:
   - Resume support for j721e-wiz driver
   - Updates to Exynos usbdrd driver
   - Support for optional power domains in g12a usb2-phy driver
   - Debugfs support and updates to zynqmp driver"

* tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (56 commits)
  phy: airoha: Add dtime and Rx AEQ IO registers
  dt-bindings: phy: airoha: Add dtime and Rx AEQ IO registers
  dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema
  dt-bindings: phy: qcom,qmp-usb: fix spelling error
  phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)
  phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk
  phy: exynos5-usbdrd: convert (phy) register access clock to clk_bulk
  phy: exynos5-usbdrd: convert core clocks to clk_bulk
  phy: exynos5-usbdrd: support isolating HS and SS ports independently
  dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible
  phy: core: Fix documentation of of_phy_get
  phy: starfive: Correct the dphy configure process
  phy: zynqmp: Add debugfs support
  phy: zynqmp: Take the phy mutex in xlate
  phy: zynqmp: Only wait for PLL lock "primary" instances
  phy: zynqmp: Store instance instead of type
  phy: zynqmp: Enable reference clock correctly
  phy: cadence-torrent: Check return value on register read
  phy: Fix the cacography in phy-exynos5250-usb2.c
  phy: phy-rockchip-samsung-hdptx: Select CONFIG_MFD_SYSCON
  ...
      c33ffdb7
    • Linus Torvalds's avatar
      Merge tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire · ad7b0b7b
      Linus Torvalds authored 
      Pull soundwire updates from Vinod Koul:

 - Simplification across subsystem using cleanup.h

 - Support for debugfs to read/write commands

 - Few Intel and Qualcomm driver updates

* tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: debugfs: simplify with cleanup.h
  soundwire: cadence: simplify with cleanup.h
  soundwire: intel_ace2x: simplify with cleanup.h
  soundwire: intel_ace2x: simplify return path in hw_params
  soundwire: intel: simplify with cleanup.h
  soundwire: intel: simplify return path in hw_params
  soundwire: amd_init: simplify with cleanup.h
  soundwire: amd: simplify with cleanup.h
  soundwire: amd: simplify return path in hw_params
  soundwire: intel_auxdevice: start the bus at default frequency
  soundwire: intel_auxdevice: add cs42l43 codec to wake_capable_list
  drivers:soundwire: qcom: cleanup port maask calculations
  soundwire: bus: simplify by using local slave->prop
  soundwire: generic_bandwidth_allocation: change port_bo parameter to pointer
  soundwire: Intel: clarify Copyright information
  soundwire: intel_ace2.x: add AC timing extensions for PantherLake
  soundwire: bus: add stream refcount
  soundwire: debugfs: add interface to read/write commands
      ad7b0b7b
    • Linus Torvalds's avatar
      Merge tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine · 7a46b17d
      Linus Torvalds authored 
      Pull dmaengine updates from Vinod Koul:
 "New support:

   - New dmaengine_prep_peripheral_dma_vec() to support transfers using
     dma vectors and documentation and user in AXI dma

   - STMicro STM32 DMA3 support and new capabilities of cyclic dma

  Updates:

   - Yaml conversion for Freescale imx dma and qdma bindings,
     sprd sc9860 dma binding

   - Altera msgdma updates for descriptor management"

* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
  dt-bindings: fsl-qdma: fix interrupts 'if' check logic
  dt-bindings: dma: sprd,sc9860-dma: convert to YAML
  dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
  dmaengine: ti: add missing MODULE_DESCRIPTION() macros
  dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
  dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
  dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
  dmaengine: sh: rz-dmac: Fix lockdep assert warning
  dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
  dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
  dmaengine: qcom: gpi: remove unused struct 'reg_info'
  dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
  dt-bindings: fsl-qdma: Convert to yaml format
  dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
  dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
  dmaengine: stm32-dma3: defer channel registration to specify channel name
  dmaengine: add channel device name to channel registration
  dmaengine: stm32-dma3: improve residue granularity
  dmaengine: stm32-dma3: add device_pause and device_resume ops
  dmaengine: stm32-dma3: add DMA_MEMCPY capability
  ...
      7a46b17d
    • Joel Granados's avatar
      sysctl: treewide: constify the ctl_table argument of proc_handlers · 78eb4ea2
      Joel Granados authored 
      const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.

This patch has been generated by the following coccinelle script:

```
  virtual patch

  @r1@
  identifier ctl, write, buffer, lenp, ppos;
  identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
  @@

  int func(
  - struct ctl_table *ctl
  + const struct ctl_table *ctl
    ,int write, void *buffer, size_t *lenp, loff_t *ppos);

  @r2@
  identifier func, ctl, write, buffer, lenp, ppos;
  @@

  int func(
  - struct ctl_table *ctl
  + const struct ctl_table *ctl
    ,int write, void *buffer, size_t *lenp, loff_t *ppos)
  { ... }

  @r3@
  identifier func;
  @@

  int func(
  - struct ctl_table *
  + const struct ctl_table *
    ,int , void *, size_t *, loff_t *);

  @r4@
  identifier func, ctl;
  @@

  int func(
  - struct ctl_table *ctl
  + const struct ctl_table *ctl
    ,int , void *, size_t *, loff_t *);

  @r5@
  identifier func, write, buffer, lenp, ppos;
  @@

  int func(
  - struct ctl_table *
  + const struct ctl_table *
    ,int write, void *buffer, size_t *lenp, loff_t *ppos);

```

* Code formatting was adjusted in xfs_sysctl.c to comply with code
  conventions. The xfs_stats_clear_proc_handler,
  xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
  adjusted.

* The ctl_table argument in proc_watchdog_common was const qualified.
  This is called from a proc_handler itself and is calling back into
  another proc_handler, making it necessary to change it as part of the
  proc_handler migration.
Co-developed-by: default avatarThomas Weißschuh <linux@weissschuh.net>
Signed-off-by: default avatarThomas Weißschuh <linux@weissschuh.net>
Co-developed-by: default avatarJoel Granados <j.granados@samsung.com>
Signed-off-by: default avatarJoel Granados <j.granados@samsung.com>
      78eb4ea2
    • Linus Torvalds's avatar
      Merge tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random · 7a3fad30
      Linus Torvalds authored 
      Pull random number generator updates from Jason Donenfeld:
 "This adds getrandom() support to the vDSO.

  First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
  lets the kernel zero out pages anytime under memory pressure, which
  enables allocating memory that never gets swapped to disk but also
  doesn't count as being mlocked.

  Then, the vDSO implementation of getrandom() is introduced in a
  generic manner and hooked into random.c.

  Next, this is implemented on x86. (Also, though it's not ready for
  this pull, somebody has begun an arm64 implementation already)

  Finally, two vDSO selftests are added.

  There are also two housekeeping cleanup commits"

* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  MAINTAINERS: add random.h headers to RNG subsection
  random: note that RNDGETPOOL was removed in 2.6.9-rc2
  selftests/vDSO: add tests for vgetrandom
  x86: vdso: Wire up getrandom() vDSO implementation
  random: introduce generic vDSO getrandom() implementation
  mm: add MAP_DROPPABLE for designating always lazily freeable mappings
      7a3fad30
    • Linus Torvalds's avatar
      Merge tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs · d1e9a63d
      Linus Torvalds authored 
      Pull vfs fixes from Christian Brauner:
 "VFS:

   - The new 64bit mount ids start after the old mount id, i.e., at the
     first non-32 bit value. However, we started counting one id too
     late and thus lost 4294967296 as the first valid id. Fix that.

   - Update a few comments on some vfs_*() creation helpers.

   - Move copying of the xattr name out from the locks required to start
     a filesystem write.

   - Extend the filelock lock UAF fix to the compat code as well.

   - Now that we added the ability to look up an inode under RCU it's
     possible that lockless hash lookup can find and lock an inode after
     it gets I_FREEING set. It then waits until inode teardown in
     evict() is finished.

     The flag however is still set after evict() has woken up all
     waiters. If the inode lock is taken late enough on the waiting side
     after hash removal and wakeup happened the waiting thread will
     never be woken.

     Before RCU based lookup this was synchronized via the
     inode_hash_lock. But since unhashing requires the inode lock as
     well we can check whether the inode is unhashed while holding inode
     lock even without holding inode_hash_lock.

  pidfd:

   - The nsproxy structure contains nearly all of the namespaces
     associated with a task. When a namespace type isn't supported
     nsproxy might contain a NULL pointer or always point to the initial
     namespace type. The logic isn't consistent. So when deriving
     namespace fds we need to ensure that the namespace type is
     supported.

     First, so that we don't risk dereferncing NULL pointers. The
     correct bigger fix would be to change all namespaces to always set
     a valid namespace pointer in struct nsproxy independent of whether
     or not it is compiled in. But that requires quite a few changes.

     Second, so that we don't allow deriving namespace fds when the
     namespace type doesn't exist and thus when they couldn't also be
     derived via /proc/self/ns/.

   - Add missing selftests for the new pidfd ioctls to derive namespace
     fds. This simply extends the already existing testsuite.

  netfs:

   - Fix debug logging and fix kconfig variable name so it actually
     works.

   - Fix writeback that goes both to the server and cache. The streams
     are only activated once a subreq is added. When a server write
     happens the subreq doesn't need to have finished by the time the
     cache write is started. If the server write has already finished by
     the time the cache write is about to start the cache write will
     operate on a folio that might already have been reused. Fix this by
     preactivating the cache write.

   - Limit cachefiles subreq size for cache writes to MAX_RW_COUNT"

* tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  inode: clarify what's locked
  vfs: Fix potential circular locking through setxattr() and removexattr()
  filelock: Fix fcntl/close race recovery compat path
  fs: use all available ids
  cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT
  netfs: Fix writeback that needs to go to both server and cache
  pidfs: add selftests for new namespace ioctls
  pidfs: handle kernels without namespaces cleanly
  pidfs: when time ns disabled add check for ioctl
  vfs: correct the comments of vfs_*() helpers
  vfs: handle __wait_on_freeing_inode() and evict() race
  netfs: Rename CONFIG_FSCACHE_DEBUG to CONFIG_NETFS_DEBUG
  netfs: Revert "netfs: Switch debug logging to pr_debug()"
      d1e9a63d
    • Linus Torvalds's avatar
      hostfs: fix folio conversion · e44be002
      Linus Torvalds authored 
      Commit e3ec0fe9 ("hostfs: Convert hostfs_read_folio() to use a
folio") simplified hostfs_read_folio(), but in the process of converting
to using folios natively also mis-used the folio_zero_tail() function
due to the very confusing API of that function.

Very arguably it's folio_zero_tail() API itself that is buggy, since it
would make more sense (and the documentation kind of implies) that the
third argument would be the pointer to the beginning of the folio
buffer.

But no, the third argument to folio_zero_tail() is where we should start
zeroing the tail (even if we already also pass in the offset separately
as the second argument).

So fix the hostfs caller, and we can leave any folio_zero_tail() sanity
cleanup for later.
Reported-and-tested-by: default avatarMaciej Żenczykowski <maze@google.com>
Fixes: e3ec0fe9 ("hostfs: Convert hostfs_read_folio() to use a folio")
Link: https://lore.kernel.org/all/CANP3RGceNzwdb7w=vPf5=7BCid5HVQDmz1K5kC9JG42+HVAh_g@mail.gmail.com/
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e44be002
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7