- 16 Mar, 2018 20 commits
-
-
Liran Alon authored
Next commits are going introduce support for accessing VMware backdoor ports even though guest's TSS I/O permissions bitmap doesn't allow access. This mimic VMware hypervisor behavior. In order to support this, next commits will change VMX/SVM to intercept #GP which was raised by such access and handle it by calling the x86 emulator to emulate instruction. Since commit "KVM: x86: Always allow access to VMware backdoor I/O ports", the x86 emulator handles access to these I/O ports by not checking these ports against the TSS I/O permission bitmap. However, there could be cases that CPU rasies a #GP on instruction that fails to be disassembled by the x86 emulator (Because of incomplete implementation for example). In those cases, we would like the #GP intercept to just forward #GP as-is to guest as if there was no intercept to begin with. However, current emulator code always queues #UD exception in case emulator fails (including disassembly failures) which is not what is wanted in this flow. This commit addresses this issue by adding a new emulation_type flag that will allow the #GP intercept handler to specify that it wishes to be aware when instruction emulation fails and doesn't want #UD exception to be queued. Signed-off-by:
Liran Alon <liran.alon@oracle.com> Reviewed-by:
Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Liran Alon authored
VMware allows access to these ports even if denied by TSS I/O permission bitmap. Mimic behavior. Signed-off-by:
-
Liran Alon authored
Support access to VMware backdoor requires KVM to intercept #GP exceptions from guest which introduce slight performance hit. Therefore, control this support by module parameter. Note that module parameter is exported as it should be consumed by kvm_intel & kvm_amd to determine if they should intercept #GP or not. This commit doesn't change semantics. It is done as a preparation for future commits. Signed-off-by:
-
Sean Christopherson authored
Add kvm_fast_pio() to consolidate duplicate code in VMX and SVM. Unexport kvm_fast_pio_in() and kvm_fast_pio_out(). Suggested-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
Fast emulation of processor I/O for IN was disabled on x86 (both VMX and SVM) some years ago due to a buggy implementation. The addition of kvm_fast_pio_in(), used by SVM, re-introduced (functional!) fast emulation of IN. Piggyback SVM's work and use kvm_fast_pio_in() on VMX instead of performing full emulation of IN. Reviewed-by:
-
Sean Christopherson authored
Fail a nested VMEntry with EXIT_REASON_INVALID_STATE if L2 guest state is invalid, i.e. vmcs12 contained invalid guest state, and unrestricted guest is disabled in L0 (and by extension disabled in L1). WARN_ON_ONCE in handle_invalid_guest_state() if we're attempting to emulate L2, i.e. nested_run_pending is true, to aid debug in the (hopefully unlikely) scenario that we somehow skip the nested VMEntry consistency check, e.g. due to a L0 bug. Note: KVM relies on hardware to detect the scenario where unrestricted guest is enabled in L0 but disabled in L1 and vmcs12 contains invalid guest state, i.e. checking emulation_required in prepare_vmcs02 is required only to handle the case were unrestricted guest is disabled in L0 since L0 never actually attempts VMLAUNCH/VMRESUME with vmcs02. Signed-off-by:
-
Sean Christopherson authored
CR3 load/store exiting are always off when unrestricted guest is enabled. WARN on the associated CR3 VMEXIT to detect code that would re-introduce CR3 load/store exiting for unrestricted guest. Signed-off-by:
-
Sean Christopherson authored
Now CR3 is not forced to a host-controlled value when paging is disabled in an unrestricted guest, CR3 load/store exiting can be left disabled (for an unrestricted guest). And because CR0.WP and CR4.PAE/PSE are also not force to host-controlled values, all of ept_update_paging_mode_cr0() is no longer needed, i.e. skip ept_update_paging_mode_cr0() for an unrestricted guest. Because MOV CR3 no longer exits when paging is disabled for an unrestricted guest, vmx_decache_cr3() must always read GUEST_CR3 from the VMCS for an unrestricted guest. Signed-off-by:
-
Sean Christopherson authored
CR4.PAE - Unrestricted guest can only be enabled when EPT is enabled, and vmx_set_cr4() clears hardware CR0.PAE based on the guest's CR4.PAE, i.e. CR4.PAE always follows the guest's value when unrestricted guest is enabled. CR4.PSE - Unrestricted guest no longer uses the identity mapped IA32 page tables since CR0.PG can be cleared in hardware, thus there is no need to set CR4.PSE when paging is disabled in the guest (and EPT is enabled). Define KVM_VM_CR4_ALWAYS_ON_UNRESTRICTED_GUEST (to X86_CR4_VMXE) and use it in lieu of KVM_*MODE_VM_CR4_ALWAYS_ON when unrestricted guest is enabled, which removes the forcing of CR4.PAE. Skip the manipulation of CR4.PAE/PSE for EPT when unrestricted guest is enabled, as CR4.PAE isn't forced and so doesn't need to be manually cleared, and CR4.PSE does not need to be set when paging is disabled since the identity mapped IA32 page tables are not used. Signed-off-by:
-
Sean Christopherson authored
Unrestricted guest can only be enabled when EPT is enabled, and when EPT is enabled, ept_update_paging_mode_cr0() will clear hardware CR0.WP based on the guest's CR0.WP, i.e. CR0.WP always follows the guest's value when unrestricted guest is enabled. Signed-off-by:
-
Sean Christopherson authored
An unrestricted guest can run with hardware CR0.PG==0, i.e. IA32 paging disabled, in which case there is no need to load the guest's CR3 with identity mapped IA32 page tables since hardware will effectively ignore CR3. If unrestricted guest is enabled, don't configure the identity mapped IA32 page table and always load the guest's desired CR3. Signed-off-by:
-
Sean Christopherson authored
An unrestricted guest can run with CR0.PG==0 and/or CR0.PE==0, e.g. it can run in Real Mode without requiring host emulation. The RM TSS is only used for emulating RM, i.e. it will never be used when unrestricted guest is enabled and so doesn't need to be configured. Signed-off-by:
-
Vitaly Kuznetsov authored
Hyper-V 2016 on KVM with SynIC enabled doesn't boot with the following trace: kvm_entry: vcpu 0 kvm_exit: reason MSR_WRITE rip 0xfffff8000131c1e5 info 0 0 kvm_hv_synic_set_msr: vcpu_id 0 msr 0x40000090 data 0x10000 host 0 kvm_msr: msr_write 40000090 = 0x10000 (#GP) kvm_inj_exception: #GP (0x0) KVM acts according to the following statement from TLFS: " 11.8.4 SINTx Registers ... Valid values for vector are 16-255 inclusive. Specifying an invalid vector number results in #GP. " However, I checked and genuine Hyper-V doesn't #GP when we write 0x10000 to SINTx. I checked with Microsoft and they confirmed that if either the Masked bit (bit 16) or the Polling bit (bit 18) is set to 1, then they ignore the value of Vector. Make KVM act accordingly. Signed-off-by:Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
-
Vitaly Kuznetsov authored
When a new vector is written to SINx we update vec_bitmap/auto_eoi_bitmap but we forget to remove old vector from these masks (in case it is not present in some other SINTx). Signed-off-by:
-
Vitaly Kuznetsov authored
Nested Hyper-V/Windows guest running on top of KVM will use TSC page clocksource in two cases: - L0 exposes invariant TSC (CPUID.80000007H:EDX[8]). - L0 provides Hyper-V Reenlightenment support (CPUID.40000003H:EAX[13]). Exposing invariant TSC effectively blocks migration to hosts with different TSC frequencies, providing reenlightenment support will be needed when we start migrating nested workloads. Implement rudimentary support for reenlightenment MSRs. For now, these are just read/write MSRs with no effect. Signed-off-by:
-
KarimAllah Ahmed authored
... to avoid having a stale value when handling an EPT misconfig for MMIO regions. MMIO regions that are not passed-through to the guest are handled through EPT misconfigs. The first time a certain MMIO page is touched it causes an EPT violation, then KVM marks the EPT entry to cause an EPT misconfig instead. Any subsequent accesses to the entry will generate an EPT misconfig. Things gets slightly complicated with nested guest handling for MMIO regions that are not passed through from L0 (i.e. emulated by L0 user-space). An EPT violation for one of these MMIO regions from L2, exits to L0 hypervisor. L0 would then look at the EPT12 mapping for L1 hypervisor and realize it is not present (or not sufficient to serve the request). Then L0 injects an EPT violation to L1. L1 would then update its EPT mappings. The EXIT_QUALIFICATION value for L1 would come from exit_qualification variable in "struct vcpu". The problem is that this variable is only updated on EPT violation and not on EPT misconfig. So if an EPT violation because of a read happened first, then an EPT misconfig because of a write happened afterwards. The L0 hypervisor will still contain exit_qualification value from the previous read instead of the write and end up injecting an EPT violation to the L1 hypervisor with an out of date EXIT_QUALIFICATION. The EPT violation that is injected from L0 to L1 needs to have the correct EXIT_QUALIFICATION specially for the access bits because the individual access bits for MMIO EPTs are updated only on actual access of this specific type. So for the example above, the L1 hypervisor will keep updating only the read bit in the EPT then resume the L2 guest. The L2 guest would end up causing another exit where the L0 *again* will inject another EPT violation to L1 hypervisor with *again* an out of date exit_qualification which indicates a read and not a write. Then this ping-pong just keeps happening without making any forward progress. The behavior of mapping MMIO regions changed in: commit a340b3e2 ("kvm: Map PFN-type memory regions as writable (if possible)") ... where an EPT violation for a read would also fixup the write bits to avoid another EPT violation which by acciddent would fix the bug mentioned above. This commit fixes this situation and ensures that the access bits for the exit_qualifcation is up to date. That ensures that even L1 hypervisor running with a KVM version before the commit mentioned above would still work. ( The description above assumes EPT to be available and used by L1 hypervisor + the L1 hypervisor is passing through the MMIO region to the L2 guest while this MMIO region is emulated by the L0 user-space ). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
-
Matthias Kaehlcke authored
The type 'enum kvm_reg_ex' is an extension of 'enum kvm_reg', however the extension is only semantical and the compiler doesn't know about the relationship between the two types. In kvm_pdptr_read() a value of the extended type is passed to kvm_x86_ops->cache_reg(), which expects a value of the base type. Clang raises the following warning about the type mismatch: arch/x86/kvm/kvm_cache_regs.h:44:32: warning: implicit conversion from enumeration type 'enum kvm_reg_ex' to different enumeration type 'enum kvm_reg' [-Wenum-conversion] kvm_x86_ops->cache_reg(vcpu, VCPU_EXREG_PDPTR); Cast VCPU_EXREG_PDPTR to 'enum kvm_reg' to make the compiler happy. Signed-off-by:Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Vitaly Kuznetsov authored
Devices which use level-triggered interrupts under Windows 2016 with Hyper-V role enabled don't work: Windows disables EOI broadcast in SPIV unconditionally. Our in-kernel IOAPIC implementation emulates an old IOAPIC version which has no EOI register so EOI never happens. The issue was discovered and discussed a while ago: https://www.spinics.net/lists/kvm/msg148098.html While this is a guest OS bug (it should check that IOAPIC has the required capabilities before disabling EOI broadcast) we can workaround it in KVM: advertising DIRECTED_EOI with in-kernel IOAPIC makes little sense anyway. Signed-off-by:
-
Janakarajan Natarajan authored
Add support for AMD Core Performance counters in the guest. The base event select and counter MSRs are changed. In addition, with the core extension, there are 2 extra counters available for performance measurements for a total of 6. With the new MSRs, the logic to map them to the gp_counters[] is changed. New functions are added to check the validity of the get/set MSRs. If the guest has the X86_FEATURE_PERFCTR_CORE cpuid flag set, the number of counters available to the vcpu is set to 6. It the flag is not set then it is 4. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> [Squashed "Expose AMD Core Perf Extension flag to guests" - Radim.] Signed-off-by:
-
Janakarajan Natarajan authored
Add the EventSelect and Counter MSRs for AMD Core Perf Extension. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 08 Mar, 2018 1 commit
-
-
Krish Sadhukhan authored
According to Intel SDM 26.2.1.1, the following rules should be enforced on vmentry: * If the "NMI exiting" VM-execution control is 0, "Virtual NMIs" VM-execution control must be 0. * If the “virtual NMIs” VM-execution control is 0, the “NMI-window exiting” VM-execution control must be 0. This patch enforces these rules when entering an L2 guest. Signed-off-by:Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
- 06 Mar, 2018 10 commits
-
-
Paolo Bonzini authored
Use the new MSR feature framework to tell userspace which VMX capabilities are available for nested hypervisors. Before, these were only accessible with the KVM_GET_MSR VCPU ioctl, after VCPUs had been created. Signed-off-by:
-
Paolo Bonzini authored
Move the MSRs to a separate struct, so that we can introduce a global instance and return it from the /dev/kvm KVM_GET_MSRS ioctl. Signed-off-by:
-
Wanpeng Li authored
vCPUs are very unlikely to get preempted when they are the only task running on a CPU. PV TLB flush is slower that the native flush in that case, so disable it. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
-
Wanpeng Li authored
Waiman Long mentioned that: > Generally speaking, unfair lock performs well for VMs with a small > number of vCPUs. Native qspinlock may perform better than pvqspinlock > if there is vCPU pinning and there is no vCPU over-commitment. This patch uses the KVM_HINTS_DEDICATED performance hint, which is provided by the hypervisor admin, to choose the qspinlock algorithm when a dedicated physical CPU is available. PV_DEDICATED = 1, PV_UNHALT = anything: default is qspinlock PV_DEDICATED = 0, PV_UNHALT = 1: default is Hybrid PV queued/unfair lock PV_DEDICATED = 0, PV_UNHALT = 0: default is tas Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by:
-
Wanpeng Li authored
This patch introduces kvm_para_has_hint() to query for hints about the configuration of the guests. The first hint KVM_HINTS_DEDICATED, is set if the guest has dedicated physical CPUs for each vCPU (i.e. pinning and no over-commitment). This allows optimizing spinlocks and tells the guest to avoid PV TLB flush. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by:
-
Gal Hammer authored
The loading time of a VM is quite significant with a CPU usage reaching 100% when loading a VM that its virtio devices use a large amount of virt-queues (e.g. a virtio-serial device with max_ports=511). Most of the time is spend in re-sorting the kvm_io_bus kvm_io_range array when a new eventfd is registered. The patch replaces the existing method with an insert sort. Reviewed-by:
Marcel Apfelbaum <marcel@redhat.com> Reviewed-by:
Uri Lublin <ulublin@redhat.com> Signed-off-by:
Gal Hammer <ghammer@redhat.com> Signed-off-by:
-
Ken Hofsass authored
This commit implements an enhanced x86 version of S390 KVM_CAP_SYNC_REGS functionality. KVM_CAP_SYNC_REGS "allow[s] userspace to access certain guest registers without having to call SET/GET_*REGS”. This reduces ioctl overhead which is particularly important when userspace is making synchronous guest state modifications (e.g. when emulating and/or intercepting instructions). Originally implemented upstream for the S390, the x86 differences follow: - userspace can select the register sets to be synchronized with kvm_run using bit-flags in the kvm_valid_registers and kvm_dirty_registers fields. - vcpu_events is available in addition to the regs and sregs register sets. Signed-off-by:
Ken Hofsass <hofsass@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> [Removed wrapper around check for reserved kvm_valid_regs. - Radim] Signed-off-by:
-
Ken Hofsass authored
Replace hardcoded padding size value for struct kvm_sync_regs with #define SYNC_REGS_SIZE_BYTES. Also update the value specified in api.txt from outdated hardcoded value to SYNC_REGS_SIZE_BYTES. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Roman Kagan authored
In Hyper-V, the fast guest->host notification mechanism is the SIGNAL_EVENT hypercall, with a single parameter of the connection ID to signal. Currently this hypercall incurs a user exit and requires the userspace to decode the parameters and trigger the notification of the potentially different I/O context. To avoid the costly user exit, process this hypercall and signal the corresponding eventfd in KVM, similar to ioeventfd. The association between the connection id and the eventfd is established via the newly introduced KVM_HYPERV_EVENTFD ioctl, and maintained in an (srcu-protected) IDR. Signed-off-by:
-
Roman Kagan authored
Move kvm.arch.hyperv initialization and cleanup to separate functions. For now only a mutex is inited in the former, and the latter is empty; more stuff will go in there in a followup patch. Signed-off-by:
-
- 04 Mar, 2018 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Add missing instruction suffixes to assembly code so it can be compiled by newer GAS versions without warnings. - Switch refcount WARN exceptions to UD2 as we did in general - Make the reboot on Intel Edison platforms work - A small documentation update so text and sample command match" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation, x86, resctrl: Make text and sample command match x86/platform/intel-mid: Handle Intel Edison reboot correctly x86/asm: Add instruction suffixes to bitops x86/entry/64: Add instruction suffix x86/refcounts: Switch to UD2 for exceptions -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/pti fixes from Thomas Gleixner: "Three fixes related to melted spectrum: - Sync the cpu_entry_area page table to initial_page_table on 32 bit. Otherwise suspend/resume fails because resume uses initial_page_table and triggers a triple fault when accessing the cpu entry area. - Zero the SPEC_CTL MRS on XEN before suspend to address a shortcoming in the hypervisor. - Fix another switch table detection issue in objtool" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table objtool: Fix another switch table detection issue x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A small set of fixes from the timer departement: - Add a missing timer wheel clock forward when migrating timers off a unplugged CPU to prevent operating on a stale clock base and missing timer deadlines. - Use the proper shift count to extract data from a register value to prevent evaluating unrelated bits - Make the error return check in the FSL timer driver work correctly. Checking an unsigned variable for less than zero does not really work well. - Clarify the confusing comments in the ARC timer code" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Forward timer base before migrating timers clocksource/drivers/arc_timer: Update some comments clocksource/drivers/mips-gic-timer: Use correct shift count to extract data clocksource/drivers/fsl_ftm_timer: Fix error return checking -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixlet from Thomas Gleixner: "Just a documentation update for the missing device tree property of the R-Car M3N interrupt controller" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - when NR_CPUS is large, a SRCU structure can significantly inflate size of the main filesystem structure that would not be possible to allocate by kmalloc, so the kvalloc fallback is used - improved error handling - fix endiannes when printing some filesystem attributes via sysfs, this is could happen when a filesystem is moved between different endianity hosts - send fixes: the NO_HOLE mode should not send a write operation for a file hole - fix log replay for for special files followed by file hardlinks - fix log replay failure after unlink and link combination - fix max chunk size calculation for DUP allocation * tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix log replay failure after unlink and link combination Btrfs: fix log replay failure after linking special file and fsync Btrfs: send, fix issuing write op when processing hole in no data mode btrfs: use proper endianness accessors for super_copy btrfs: alloc_chunk: fix DUP stripe size handling btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster btrfs: handle failure of add_pending_csums btrfs: use kvzalloc to allocate btrfs_fs_info
-
- 03 Mar, 2018 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A driver fix and a documentation fix (which makes dependency handling for the next cycle easier)" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: octeon: Prevent error message on bus error dt-bindings: at24: sort manufacturers alphabetically
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A 4.16 regression fix, three fixes for -stable, and a cleanup fix: - During the merge window support for the new ACPI NVDIMM Platform Capabilities structure disabled support for "deep flush", a force-unit- access like mechanism for persistent memory. Restore that mechanism. - VFIO like RDMA is yet one more memory registration / pinning interface that is incompatible with Filesystem-DAX. Disable long term pins of Filesystem-DAX mappings via VFIO. - The Filesystem-DAX detection to prevent long terms pins mistakenly also disabled Device-DAX pins which are not subject to the same block- map collision concerns. - Similar to the setup path, softlockup warnings can trigger in the shutdown path for large persistent memory namespaces. Teach for_each_device_pfn() to perform cond_resched() in all cases. - Boaz noticed that the might_sleep() in dax_direct_access() is stale as of the v4.15 kernel. These have received a build success notification from the 0day robot, and the longterm pin fixes have appeared in -next. However, I recently rebased the tree to remove some other fixes that need to be reworked after review feedback. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: memremap: fix softlockup reports at teardown libnvdimm: re-enable deep flush for pmem devices via fsync() vfio: disable filesystem-dax page pinning dax: fix vma_is_fsdax() helper dax: ->direct_access does not sleep anymore -
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - suppress sparse warnings about unknown attributes - fix typos and stale comments - fix build error of arch/sh - fix wrong use of ld-option vs cc-ldoption - remove redundant GCC_PLUGINS_CFLAGS assignment - fix another memory leak of Kconfig - fix line number in error messages of Kconfig - do not write confusing CONFIG_DEFCONFIG_LIST out to .config - add xstrdup() to Kconfig to handle memory shortage errors - show also a Debian package name if ncurses is missing * tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: MAINTAINERS: take over Kconfig maintainership kconfig: fix line number in recursive inclusion error message Coccinelle: memdup: Fix typo in warning messages kconfig: Update ncurses package names for menuconfig kbuild/kallsyms: trivial typo fix kbuild: test --build-id linker flag by ld-option instead of cc-ldoption kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment kconfig: Don't leak choice names during parsing sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list kconfig: add xstrdup() helper kbuild: disable sparse warnings about unknown attributes Makefile: Fix lying comment re. silentoldconfig
-
