Merge tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest KUnit support gtom Shuah Khan:
 "This adds KUnit, a lightweight unit testing and mocking framework for
  the Linux kernel from Brendan Higgins.

  KUnit is not an end-to-end testing framework. It is currently
  supported on UML and sub-systems can write unit tests and run them in
  UML env. KUnit documentation is included in this update.

  In addition, this Kunit update adds 3 new kunit tests:

   - proc sysctl test from Iurii Zaikin

   - the 'list' doubly linked list test from David Gow

   - ext4 tests for decoding extended timestamps from Iurii Zaikin

  In the future KUnit will be linked to Kselftest framework to provide a
  way to trigger KUnit tests from user-space"

* tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
  lib/list-test: add a test for the 'list' doubly linked list
  ext4: add kunit test for decoding extended timestamps
  Documentation: kunit: Fix verification command
  kunit: Fix '--build_dir' option
  kunit: fix failure to build without printk
  MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section
  kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
  MAINTAINERS: add entry for KUnit the unit testing framework
  Documentation: kunit: add documentation for KUnit
  kunit: defconfig: add defconfigs for building KUnit tests
  kunit: tool: add Python wrappers for running KUnit tests
  kunit: test: add tests for KUnit managed resources
  kunit: test: add the concept of assertions
  kunit: test: add tests for kunit test abort
  kunit: test: add support for test abort
  objtool: add kunit_try_catch_throw to the noreturn list
  kunit: test: add initial tests
  lib: enable building KUnit in lib/
  kunit: test: add the concept of expectations
  kunit: test: add assertion printing library
  ...

Merge tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This consists of several fixes to tests and framework.

  Masami Hiramatsu fixed several tests to build and run correctly on arm
  and other 32bit architectures"

* tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: sync: Fix cast warnings on arm
  selftests: net: Fix printf format warnings on arm
  selftests: net: Use size_t and ssize_t for counting file size
  selftests: vm: Build/Run 64bit tests only on 64bit arch
  selftests: proc: Make va_max 1MB
  kselftest: Fix NULL INSTALL_PATH for TARGETS runlist
  selftests: Move kselftest_module.sh into kselftest/
  selftests: gen_kselftest_tar.sh: Do not clobber kselftest/
  selftests: breakpoints: Fix a typo of function name
  selftests: Fix O= and KBUILD_OUTPUT handling for relative paths

Pull fsverity updates from Eric Biggers:
 "Expose the fs-verity bit through statx()"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  docs: fs-verity: mention statx() support
  f2fs: support STATX_ATTR_VERITY
  ext4: support STATX_ATTR_VERITY
  statx: define STATX_ATTR_VERITY
  docs: fs-verity: document first supported kernel version

Pull fscrypt updates from Eric Biggers:

 - Add the IV_INO_LBLK_64 encryption policy flag which modifies the
   encryption to be optimized for UFS inline encryption hardware.

 - For AES-128-CBC, use the crypto API's implementation of ESSIV (which
   was added in 5.4) rather than doing ESSIV manually.

 - A few other cleanups.

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  f2fs: add support for IV_INO_LBLK_64 encryption policies
  ext4: add support for IV_INO_LBLK_64 encryption policies
  fscrypt: add support for IV_INO_LBLK_64 policies
  fscrypt: avoid data race on fscrypt_mode::logged_impl_name
  docs: ioctl-number: document fscrypt ioctl numbers
  fscrypt: zeroize fscrypt_info before freeing
  fscrypt: remove struct fscrypt_ctx
  fscrypt: invoke crypto API for ESSIV handling

Pull AFFS updates from David Sterba:
 "A minor bugfix and cleanup for AFFS"

* tag 'affs-for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: fix a memory leak in affs_remount
  affs: Replace binary semaphores with mutexes

Pull btrfs updates from David Sterba:
 "User visible changes:
   - new block group profiles: RAID1 with 3- and 4- copies
       - RAID1 in btrfs has always 2 copies, now add support for 3 and 4
       - this is an incompat feature (named RAID1C34)
       - recommended use of RAID1C3 is replacement of RAID6 profile on
         metadata, this brings a more reliable resiliency against 2
         device loss/damage

   - support for new checksums
       - per-filesystem, set at mkfs time
       - fast hash (crc32c successor): xxhash, 64bit digest
       - strong hashes (both 256bit): sha256 (slower, FIPS), blake2b
         (faster)
       - the blake2b module goes via the crypto tree, btrfs.ko has a
         soft dependency

   - speed up lseek, don't take inode locks unnecessarily, this can
     speed up parallel SEEK_CUR/SEEK_SET/SEEK_END by 80%

   - send:
       - allow clone operations within the same file
       - limit maximum number of sent clone references to avoid slow
         backref walking

   - error message improvements: device scan prints process name and PID

  Core changes:
   - cleanups
       - remove unique workqueue helpers, used to provide a way to avoid
         deadlocks in the workqueue code, now done in a simpler way
       - remove lots of indirect function calls in compression code
       - extent IO tree code moved out of extent_io.c
       - cleanup backup superblock handling at mount time
       - transaction life cycle documentation and cleanups
       - locking code cleanups, annotations and documentation
       - add more cold, const, pure function attributes
       - removal of unused or redundant struct members or variables

   - new tree-checker sanity tests
       - try to detect missing INODE_ITEM, cross-reference checks of
         DIR_ITEM, DIR_INDEX, INODE_REF, and XATTR_* items

   - remove own bio scheduling code (used to avoid checksum submissions
     being stuck behind other IO), replaced by cgroup controller-based
     code to allow better control and avoid priority inversions in cases
     where the custom and cgroup scheduling disagreed

  Fixes:
   - avoid getting stuck during cyclic writebacks

   - fix trimming of ranges crossing block group boundaries

   - fix rename exchange on subvolumes, all involved subvolumes need to
     be recorded in the transaction"

* tag 'for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (137 commits)
  btrfs: drop bdev argument from submit_extent_page
  btrfs: remove extent_map::bdev
  btrfs: drop bio_set_dev where not needed
  btrfs: get bdev directly from fs_devices in submit_extent_page
  btrfs: record all roots for rename exchange on a subvol
  Btrfs: fix block group remaining RO forever after error during device replace
  btrfs: scrub: Don't check free space before marking a block group RO
  btrfs: change btrfs_fs_devices::rotating to bool
  btrfs: change btrfs_fs_devices::seeding to bool
  btrfs: rename btrfs_block_group_cache
  btrfs: block-group: Reuse the item key from caller of read_one_block_group()
  btrfs: block-group: Refactor btrfs_read_block_groups()
  btrfs: document extent buffer locking
  btrfs: access eb::blocking_writers according to ACCESS_ONCE policies
  btrfs: set blocking_writers directly, no increment or decrement
  btrfs: merge blocking_writers branches in btrfs_tree_read_lock
  btrfs: drop incompat bit for raid1c34 after last block group is gone
  btrfs: add incompat for raid1 with 3, 4 copies
  btrfs: add support for 4-copy replication (raid1c4)
  btrfs: add support for 3-copy replication (raid1c3)
  ...

Pull MTD updates from Miquel Raynal:
 "MTD core:
   - drop inactive maintainers, update the repositories and add IRC
     channel
   - debugfs functions improvements
   - initialize more structure parameters
   - misc fixes reported by robots

  MTD devices:
   - spear_smi: Fixed Write Burst mode
   - new Intel IXP4xx flash probing hook

  Raw NAND core:
   - useless extra checks dropped
   - update the detection of the bad block markers position

  Raw NAND controller drivers:
   - Cadence: new driver
   - Brcmnand: support for flash-dma v0 + fixes
   - Denali: drop support for the legacy controller/chip DT representation
   - superfluous dev_err() calls removed

  SPI NOR core changes:
   - introduce 'struct spi_nor_controller_ops'
   - clean the Register Operations methods
   - use dev_dbg insted of dev_err for low level info
   - fix retlen handling in sst_write()
   - fix silent truncations in spi_nor_read and spi_nor_read_raw()
   - fix the clearing of QE bit on lock()/unlock()
   - rework the disabling of the block write protection
   - rework the Quad Enable methods
   - make sure nor->spimem and nor->controller_ops are mutually exclusive
   - set default Quad Enable method for ISSI flashes
   - add support for few flashes

  SPI NOR controller drivers changes:
   - intel-spi:
      - support chips without software sequencer
      - add support for Intel Cannon Lake and Intel Comet Lake-H flashes

  CFI core changes:
   - code cleanups related useless initializers and coding style issues
   - fix for a possible double free problem in cfi_cmdset_0002
   - improved HyperFlash error reporting and handling in cfi_cmdset_0002 core"

* tag 'mtd/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (73 commits)
  mtd: devices: fix mchp23k256 read and write
  mtd: no need to check return value of debugfs_create functions
  mtd: spi-nor: Set default Quad Enable method for ISSI flashes
  mtd: spi-nor: Add support for is25wp256
  mtd: spi-nor: Add support for w25q256jw
  mtd: spi-nor: Move condition to avoid a NULL check
  mtd: spi-nor: Make sure nor->spimem and nor->controller_ops are mutually exclusive
  mtd: spi-nor: Rename Quad Enable methods
  mtd: spi-nor: Merge spansion Quad Enable methods
  mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1
  mtd: spi-nor: Extend the SR Read Back test
  mtd: spi-nor: Rework the disabling of block write protection
  mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()
  mtd: cfi_cmdset_0002: fix delayed error detection on HyperFlash
  mtd: cfi_cmdset_0002: only check errors when ready in cfi_check_err_status()
  mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup()
  mtd: cfi_cmdset_*: kill useless 'ret' variable initializers
  mtd: cfi_util: use DIV_ROUND_UP() in cfi_udelay()
  mtd: spi-nor: Print debug message when the read back test fails
  mtd: spi-nor: Check all the bits written, not just the BP ones
  ...

Merge tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Fix DM core to disallow stacking request-based DM on partitions.

 - Fix DM raid target to properly resync raidset even if bitmap needed
   additional pages.

 - Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
   IO and crypt workqueues.

 - Fix DM integrity metadata layout that was aligned on 128K boundary
   rather than the intended 4K boundary (removes 124K of wasted space
   for each metadata block).

 - Improve the DM thin, cache and clone targets to use spin_lock_irq
   rather than spin_lock_irqsave where possible.

 - Fix DM thin single thread performance that was lost due to needless
   workqueue wakeups.

 - Fix DM zoned target performance that was lost due to excessive
   backing device checks.

 - Add ability to trigger write failure with the DM dust test target.

 - Fix whitespace indentation in drivers/md/Kconfig.

 - Various smalls fixes and cleanups (e.g. use struct_size, fix
   uninitialized variable, variable renames, etc).

* tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
  Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
  dm: Fix Kconfig indentation
  dm thin: wakeup worker only when deferred bios exist
  dm integrity: fix excessive alignment of metadata runs
  dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout
  dm zoned: reduce overhead of backing device checks
  dm dust: add limited write failure mode
  dm dust: change ret to r in dust_map_read and dust_map
  dm dust: change result vars to r
  dm cache: replace spin_lock_irqsave with spin_lock_irq
  dm bio prison: replace spin_lock_irqsave with spin_lock_irq
  dm thin: replace spin_lock_irqsave with spin_lock_irq
  dm clone: add bucket_lock_irq/bucket_unlock_irq helpers
  dm clone: replace spin_lock_irqsave with spin_lock_irq
  dm writecache: handle REQ_FUA
  dm writecache: fix uninitialized variable warning
  dm stripe: use struct_size() in kmalloc()
  dm raid: streamline rs_get_progress() and its raid_status() caller side
  dm raid: simplify rs_setup_recovery call chain
  dm raid: to ensure resynchronization, perform raid set grow in preresume
  ...

Pull disk revalidation updates from Jens Axboe:
 "This continues the work that Jan Kara started to thoroughly cleanup
  and consolidate how we handle rescans and revalidations"

* tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block:
  block: move clearing bd_invalidated into check_disk_size_change
  block: remove (__)blkdev_reread_part as an exported API
  block: fix bdev_disk_changed for non-partitioned devices
  block: move rescan_partitions to fs/block_dev.c
  block: merge invalidate_partitions into rescan_partitions
  block: refactor rescan_partitions

Pull zoned block device update from Jens Axboe:
 "Enhancements and improvements to the zoned device support"

* tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block:
  scsi: sd_zbc: Remove set but not used variable 'buflen'
  block: rework zone reporting
  scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  null_blk: Add zone_nr_conv to features
  null_blk: clean up report zones
  null_blk: clean up the block device operations
  block: Remove partition support for zoned block devices
  block: Simplify report zones execution
  block: cleanup the !zoned case in blk_revalidate_disk_zones
  block: Enhance blk_revalidate_disk_zones()

Pull additional block driver updates from Jens Axboe:
 "Here's another block driver update, done to avoid conflicts with the
  zoned changes coming next.

  This contains:

   - Prepare SCSI sd for zone open/close/finish support

   - Small NVMe pull request
        - hwmon support (Akinobu)
        - add new co-maintainer (Christoph)
        - work-around for a discard issue on non-conformant drives
          (Eduard)

   - Small nbd leak fix"

* tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block:
  nbd: prevent memory leak
  nvme: hwmon: add quirk to avoid changing temperature threshold
  nvme: hwmon: provide temperature min and max values for each sensor
  nvmet: add another maintainer
  nvme: Discard workaround for non-conformant devices
  nvme: Add hardware monitoring support
  scsi: sd_zbc: add zone open, close, and finish support

Pull block driver updates from Jens Axboe:
 "Here are the main block driver updates for 5.5. Nothing major in here,
  mostly just fixes. This contains:

   - a set of bcache changes via Coly

   - MD changes from Song

   - loop unmap write-zeroes fix (Darrick)

   - spelling fixes (Geert)

   - zoned additions cleanups to null_blk/dm (Ajay)

   - allow null_blk online submit queue changes (Bart)

   - NVMe changes via Keith, nothing major here either"

* tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits)
  Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
  drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
  drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
  bcache: don't export symbols
  bcache: remove the extra cflags for request.o
  bcache: at least try to shrink 1 node in bch_mca_scan()
  bcache: add idle_max_writeback_rate sysfs interface
  bcache: add code comments in bch_btree_leaf_dirty()
  bcache: fix deadlock in bcache_allocator
  bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front()
  bcache: deleted code comments for dead code in bch_data_insert_keys()
  bcache: add more accurate error messages in read_super()
  bcache: fix static checker warning in bcache_device_free()
  bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
  bcache: fix fifo index swapping condition in journal_pin_cmp()
  md/raid10: prevent access of uninitialized resync_pages offset
  md: avoid invalid memory access for array sb->dev_roles
  md/raid1: avoid soft lockup under high load
  null_blk: add zone open, close, and finish support
  dm: add zone open, close and finish support
  ...

Pull core block updates from Jens Axboe:
 "Due to more granular branches, this one is small and will be followed
  with other core branches that add specific features. I meant to just
  have a core and drivers branch, but external dependencies we ended up
  adding a few more that are also core.

  The changes are:

   - Fixes and improvements for the zoned device support (Ajay, Damien)

   - sed-opal table writing and datastore UID (Revanth)

   - blk-cgroup (and bfq) blk-cgroup stat fixes (Tejun)

   - Improvements to the block stats tracking (Pavel)

   - Fix for overruning sysfs buffer for large number of CPUs (Ming)

   - Optimization for small IO (Ming, Christoph)

   - Fix typo in RWH lifetime hint (Eugene)

   - Dead code removal and documentation (Bart)

   - Reduction in memory usage for queue and tag set (Bart)

   - Kerneldoc header documentation (André)

   - Device/partition revalidation fixes (Jan)

   - Stats tracking for flush requests (Konstantin)

   - Various other little fixes here and there (et al)"

* tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block: (48 commits)
  Revert "block: split bio if the only bvec's length is > SZ_4K"
  block: add iostat counters for flush requests
  block,bfq: Skip tracing hooks if possible
  block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64'
  blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1
  block: Don't disable interrupts in trigger_softirq()
  sbitmap: Delete sbitmap_any_bit_clear()
  blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()
  block: split bio if the only bvec's length is > SZ_4K
  block: still try to split bio if the bvec crosses pages
  blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT
  blk-cgroup: reimplement basic IO stats using cgroup rstat
  blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive()
  blk-throtl: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: relocate bfqg_*rwstat*() helpers
  block: add zone open, close and finish ioctl support
  block: add zone open, close and finish operations
  block: Simplify REQ_OP_ZONE_RESET_ALL handling
  block: Remove REQ_OP_ZONE_RESET plugging
  ...

Pull libata updates from Jens Axboe:
 "Just a few fixes all over the place, support for the Annapurna SATA
  controller, and a patchset that cleans up the error defines and
  ultimately fixes anissue with sata_mv"

* tag 'for-5.5/libata-20191121' of git://git.kernel.dk/linux-block:
  ata: pata_artop: make arrays static const, makes object smaller
  ata_piix: remove open-coded dmi_match(DMI_OEM_STRING)
  ata: sata_mv, avoid trigerrable BUG_ON
  ata: make qc_prep return ata_completion_errors
  ata: define AC_ERR_OK
  ata: Documentation, fix function names
  libata: Ensure ata_port probe has completed before detach
  ahci: tegra: use regulator_bulk_set_supply_names()
  ahci: Add support for Amazon's Annapurna Labs SATA controller

Pull io_uring updates from Jens Axboe:
 "A lot of stuff has been going on this cycle, with improving the
  support for networked IO (and hence unbounded request completion
  times) being one of the major themes. There's been a set of fixes done
  this week, I'll send those out as well once we're certain we're fully
  happy with them.

  This contains:

   - Unification of the "normal" submit path and the SQPOLL path (Pavel)

   - Support for sparse (and bigger) file sets, and updating of those
     file sets without needing to unregister/register again.

   - Independently sized CQ ring, instead of just making it always 2x
     the SQ ring size. This makes it more flexible for networked
     applications.

   - Support for overflowed CQ ring, never dropping events but providing
     backpressure on submits.

   - Add support for absolute timeouts, not just relative ones.

   - Support for generic cancellations. This divorces io_uring from
     workqueues as well, which additionally gets us one step closer to
     generic async system call support.

   - With cancellations, we can support grabbing the process file table
     as well, just like we do mm context. This allows support for system
     calls that create file descriptors, like accept4() support that's
     built on top of that.

   - Support for io_uring tracing (Dmitrii)

   - Support for linked timeouts. These abort an operation if it isn't
     completed by the time noted in the linke timeout.

   - Speedup tracking of poll requests

   - Various cleanups making the coder easier to follow (Jackie, Pavel,
     Bob, YueHaibing, me)

   - Update MAINTAINERS with new io_uring list"

* tag 'for-5.5/io_uring-20191121' of git://git.kernel.dk/linux-block: (64 commits)
  io_uring: make POLL_ADD/POLL_REMOVE scale better
  io-wq: remove now redundant struct io_wq_nulls_list
  io_uring: Fix getting file for non-fd opcodes
  io_uring: introduce req_need_defer()
  io_uring: clean up io_uring_cancel_files()
  io-wq: ensure free/busy list browsing see all items
  io-wq: ensure we have a stable view of ->cur_work for cancellations
  io_wq: add get/put_work handlers to io_wq_create()
  io_uring: check for validity of ->rings in teardown
  io_uring: fix potential deadlock in io_poll_wake()
  io_uring: use correct "is IO worker" helper
  io_uring: fix -ENOENT issue with linked timer with short timeout
  io_uring: don't do flush cancel under inflight_lock
  io_uring: flag SQPOLL busy condition to userspace
  io_uring: make ASYNC_CANCEL work with poll and timeout
  io_uring: provide fallback request for OOM situations
  io_uring: convert accept4() -ERESTARTSYS into -EINTR
  io_uring: fix error clear of ->file_table in io_sqe_files_register()
  io_uring: separate the io_free_req and io_free_req_find_next interface
  io_uring: keep io_put_req only responsible for release and put req
  ...

Pull tpmd updates from Jarkko Sakkinen:

 - support for Cr50 fTPM

 - support for fTPM on AMD Zen+ CPUs

 - TPM 2.0 trusted keys code relocated from drivers/char/tpm to
   security/keys

* tag 'tpmdd-next-20191112' of git://git.infradead.org/users/jjs/linux-tpmdd:
  KEYS: trusted: Remove set but not used variable 'keyhndl'
  tpm: Switch to platform_get_irq_optional()
  tpm_crb: fix fTPM on AMD Zen+ CPUs
  KEYS: trusted: Move TPM2 trusted keys code
  KEYS: trusted: Create trusted keys subsystem
  KEYS: Use common tpm_buf for trusted and asymmetric keys
  tpm: Move tpm_buf code to include/linux/
  tpm: use GFP_KERNEL instead of GFP_HIGHMEM for tpm_buf
  tpm: add check after commands attribs tab allocation
  tpm: tpm_tis_spi: Drop THIS_MODULE usage from driver struct
  tpm: tpm_tis_spi: Cleanup includes
  tpm: tpm_tis_spi: Support cr50 devices
  tpm: tpm_tis_spi: Introduce a flow control callback
  tpm: Add a flag to indicate TPM power is managed by firmware
  dt-bindings: tpm: document properties for cr50
  tpm_tis: override durations for STM tpm with firmware 1.2.8.28
  tpm: provide a way to override the chip returned durations
  tpm: Remove duplicate code from caps_show() in tpm-sysfs.c

fdget_pos() is used by file operations that will read and update f_pos:
things like "read()", "write()" and "lseek()" (but not, for example,
"pread()/pwrite" that get their file positions elsewhere).

However, it had two separate escape clauses for this, because not
everybody wants or needs serialization of the file position.

The first and most obvious case is the "file descriptor doesn't have a
position at all", ie a stream-like file.  Except we didn't actually use
FMODE_STREAM, but instead used FMODE_ATOMIC_POS.  The reason for that
was that FMODE_STREAM didn't exist back in the days, but also that we
didn't want to mark all the special cases, so we only marked the ones
that _required_ position atomicity according to POSIX - regular files
and directories.

The case one was intentionally lazy, but now that we _do_ have
FMODE_STREAM we could and should just use it.  With the change to use
FMODE_STREAM, there are no remaining uses for FMODE_ATOMIC_POS, and all
the code to set it is deleted.

Any cases where we don't want the serialization because the driver (or
subsystem) doesn't use the file position should just be updated to do
"stream_open()".  We've done that for all the obvious and common
situations, we may need a few more.  Quoting Kirill Smelkov in the
original FMODE_STREAM thread (see link below for full email):

 "And I appreciate if people could help at least somehow with "getting
  rid of mixed case entirely" (i.e. always lock f_pos_lock on
  !FMODE_STREAM), because this transition starts to diverge from my
  particular use-case too far. To me it makes sense to do that
  transition as follows:

   - convert nonseekable_open -> stream_open via stream_open.cocci;
   - audit other nonseekable_open calls and convert left users that
     truly don't depend on position to stream_open;
   - extend stream_open.cocci to analyze alloc_file_pseudo as well (this
     will cover pipes and sockets), or maybe convert pipes and sockets
     to FMODE_STREAM manually;
   - extend stream_open.cocci to analyze file_operations that use
     no_llseek or noop_llseek, but do not use nonseekable_open or
     alloc_file_pseudo. This might find files that have stream semantic
     but are opened differently;
   - extend stream_open.cocci to analyze file_operations whose
     .read/.write do not use ppos at all (independently of how file was
     opened);
   - ...
   - after that remove FMODE_ATOMIC_POS and always take f_pos_lock if
     !FMODE_STREAM;
   - gather bug reports for deadlocked read/write and convert missed
     cases to FMODE_STREAM, probably extending stream_open.cocci along
     the road to catch similar cases

  i.e. always take f_pos_lock unless a file is explicitly marked as
  being stream, and try to find and cover all files that are streams"

We have not done the "extend stream_open.cocci to analyze
alloc_file_pseudo" as well, but the previous commit did manually handle
the case of pipes and sockets.

The other case where we can avoid locking f_pos is the "this file
descriptor only has a single user and it is us, and thus there is no
need to lock it".

The second test was correct, although a bit subtle and worth just
re-iterating here.  There are two kinds of other sources of references
to the same file descriptor: file descriptors that have been explicitly
shared across fork() or with dup(), and file tables having elevated
reference counts due to threading (or explicit file sharing with
clone()).

The first case would have incremented the file count explicitly, and in
the second case the previous __fdget() would have incremented it for us
and set the FDPUT_FPUT flag.

But in both cases the file count would be greater than one, so the
"file_count(file) > 1" test catches both situations.  Also note that if
file_count is 1, that also means that no other thread can have access to
the file table, so there also cannot be races with concurrent calls to
dup()/fork()/clone() that would increment the file count any other way.

Link: https://lore.kernel.org/linux-fsdevel/20190413184404.GA13490@deco.navytux.spb.ru
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Eic Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Marco Elver <elver@google.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit 3975b097 ("convert stream-like files -> stream_open, even
if they use noop_llseek") Kirill used a coccinelle script to change
"nonseekable_open()" to "stream_open()", which changed the trivial cases
of stream-like file descriptors to the new model with FMODE_STREAM.

However, the two big cases - sockets and pipes - don't actually have
that trivial pattern at all, and were thus never converted to
FMODE_STREAM even though it makes lots of sense to do so.

That's particularly true when looking forward to the next change:
getting rid of FMODE_ATOMIC_POS entirely, and just using FMODE_STREAM to
decide whether f_pos updates are needed or not.  And if they are, we'll
always do them atomically.

This came up because KCSAN (correctly) noted that the non-locked f_pos
updates are data races: they are clearly benign for the case where we
don't care, but it would be good to just not have that issue exist at
all.

Note that the reason we used FMODE_ATOMIC_POS originally is that only
doing it for the minimal required case is "safer" in that it's possible
that the f_pos locking can cause unnecessary serialization across the
whole write() call.  And in the worst case, that kind of serialization
can cause deadlock issues: think writers that need readers to empty the
state using the same file descriptor.

[ Note that the locking is per-file descriptor - because it protects
  "f_pos", which is obviously per-file descriptor - so it only affects
  cases where you literally use the same file descriptor to both read
  and write.

  So a regular pipe that has separate reading and writing file
  descriptors doesn't really have this situation even though it's the
  obvious case of "reader empties what a bit writer concurrently fills"

  But we want to make pipes as being stream-line anyway, because we
  don't want the unnecessary overhead of locking, and because a named
  pipe can be (ab-)used by reading and writing to the same file
  descriptor. ]

There are likely a lot of other cases that might want FMODE_STREAM, and
looking for ".llseek = no_llseek" users and other cases that don't have
an lseek file operation at all and making them use "stream_open()" might
be a good idea.  But pipes and sockets are likely to be the two main
cases.

Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Eic Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Marco Elver <elver@google.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull cramfs fix from Al Viro:
 "Regression fix, fallen through the cracks"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cramfs: fix usage on non-MTD device

When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if
we fail to mount on MTD, we don't try on block device.

Note: this relies upon cramfs_mtd_fill_super() leaving no side
effects on fc state in case of failure; in general, failing
get_tree_...() does *not* mean "fine to try again"; e.g. parsed
options might've been consumed by fill_super callback and freed
on failure.

Fixes: 74f78fc5 ("vfs: Convert cramfs to use the new mount API")
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull last minute virtio bugfixes from Michael Tsirkin:
 "Minor bugfixes all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: fix shrinker count
  virtio_balloon: fix shrinker scan number of pages
  virtio_console: allocate inbufs in add_port() only if it is needed
  virtio_ring: fix return code on DMA mapping fails

Pull input fix from Dmitry Torokhov:
 "Just a single revert as RMI mode should not have been enabled for this
  model [yet?]"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"

This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d.

Ugh, I really dropped the ball on this one :\. So as it turns out RMI4
works perfectly fine on the X1 Extreme Gen 2 except for one thing I
didn't notice because I usually use the trackpoint: clicking with the
touchpad. Somehow this is broken, in fact we don't even seem to indicate
BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even
see any RMI4 events coming from the touchpad when I press down on it.
This only seems to work for PS/2 mode.

Since that means we have a regression, and PS/2 mode seems to work fine
for the time being - revert this for now. We'll have to do a more
thorough investigation on this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull networking fixes from David Miller:

 1) Validate tunnel options length in act_tunnel_key, from Xin Long.

 2) Fix DMA sync bug in gve driver, from Adi Suresh.

 3) TSO kills performance on some r8169 chips due to HW issues, disable
    by default in that case, from Corinna Vinschen.

 4) Fix clock disable mismatch in fec driver, from Chubong Yuan.

 5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan.

 6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann.

 7) Don't napi_disable() twice in r8152 driver, from Hayes Wang.

 8) Fix SKB extension memory leak, from Florian Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  r8152: avoid to call napi_disable twice
  MAINTAINERS: Add myself as maintainer of virtio-vsock
  udp: drop skb extensions before marking skb stateless
  net: rtnetlink: prevent underflows in do_setvfinfo()
  can: m_can_platform: remove unnecessary m_can_class_resume() call
  can: m_can_platform: set net_device structure as driver data
  hv_netvsc: Fix send_table offset in case of a host bug
  hv_netvsc: Fix offset usage in netvsc_send_table()
  net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN
  sfc: Only cancel the PPS workqueue if it exists
  nfc: port100: handle command failure cleanly
  net-sysfs: fix netdev_queue_add_kobject() breakage
  r8152: Re-order napi_disable in rtl8152_close
  net: qca_spi: Move reset_count to struct qcaspi
  net: qca_spi: fix receive buffer size check
  net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode
  Revert "net/ibmvnic: Fix EOI when running in XIVE mode"
  net/mlxfw: Verify FSM error code translation doesn't exceed array size
  net/mlx5: Update the list of the PCI supported devices
  net/mlx5: Fix auto group size calculation
  ...

By default s_maxbytes is set to MAX_NON_LFS, which limits the usable
file size to 2GB, enforced by the vfs.

Commit b9b1f8d5 ("AFS: write support fixes") added support for the
64-bit fetch and store server operations, but did not change this value.
As a result, attempts to write past the 2G mark result in EFBIG errors:

 $ dd if=/dev/zero of=foo bs=1M count=1 seek=2048
 dd: error writing 'foo': File too large

Set s_maxbytes to MAX_LFS_FILESIZE.

Fixes: b9b1f8d5 ("AFS: write support fixes")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Servers sending callback breaks to the YFS_CM_SERVICE service may
send up to YFSCBMAX (1024) fids in a single RPC.  Anything over
AFSCBMAX (50) will cause the assert in afs_break_callbacks to trigger.

Remove the assert, as the count has already been checked against
the appropriate max values in afs_deliver_cb_callback and
afs_deliver_yfs_cb_callback.

Fixes: 35dbfba3 ("afs: Implement the YFS cache manager service")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Call napi_disable() twice would cause dead lock. There are three situations
may result in the issue.

1. rtl8152_pre_reset() and set_carrier() are run at the same time.
2. Call rtl8152_set_tunable() after rtl8152_close().
3. Call rtl8152_set_ringparam() after rtl8152_close().

For #1, use the same solution as commit 84811412 ("r8152: Re-order
napi_disable in rtl8152_close"). For #2 and #3, add checking the flag
of IFF_UP and using napi_disable/napi_enable during mutex.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge misc fixes from Andrew Morton:
 "Three fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/ksm.c: don't WARN if page is still mapped in remove_stable_node()
  mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span()
  Revert "fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()"

Merge tag 'linux-can-fixes-for-5.4-20191122' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2019-11-22

this is a pull request of 2 patches for net/master, if possible for the
current release cycle. Otherwise these patches should hit v5.4 via the
stable tree.

Both patches of this pull request target the m_can driver. Pankaj Sharma
fixes the fallout in the m_can_platform part, which appeared with the
introduction of the m_can platform framework.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since I'm actively working on vsock and virtio/vhost transports,
Stefan suggested to help him to maintain it.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Once udp stack has set the UDP_SKB_IS_STATELESS flag, later skb free
assumes all skb head state has been dropped already.

This will leak the extension memory in case the skb has extensions other
than the ipsec secpath, e.g. bridge nf data.

To fix this, set the UDP_SKB_IS_STATELESS flag only if we don't have
extensions or if the extension space can be free'd.

Fixes: 895b5c9f ("netfilter: drop bridge nf reset from nf_reset")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Byron Stanoszek <gandalf@winds.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The "ivm->vf" variable is a u32, but the problem is that a number of
drivers cast it to an int and then forget to check for negatives.  An
example of this is in the cxgb4 driver.

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
  2890  static int cxgb4_mgmt_get_vf_config(struct net_device *dev,
  2891                                      int vf, struct ifla_vf_info *ivi)
                                            ^^^^^^
  2892  {
  2893          struct port_info *pi = netdev_priv(dev);
  2894          struct adapter *adap = pi->adapter;
  2895          struct vf_info *vfinfo;
  2896
  2897          if (vf >= adap->num_vfs)
                    ^^^^^^^^^^^^^^^^^^^
  2898                  return -EINVAL;
  2899          vfinfo = &adap->vfinfo[vf];
                ^^^^^^^^^^^^^^^^^^^^^^^^^^

There are 48 functions affected.

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646'
drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254'
drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646'
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646'
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power management regression fix from Rafael Wysocki:
 "Fix problems with switching cpufreq drivers on some x86 systems with
  ACPI (and with changing the operation modes of the intel_pstate driver
  on those systems) introduced by recent changes related to the
  management of frequency limits in cpufreq"

* tag 'pm-5.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: QoS: Invalidate frequency QoS requests after removal

Pull drm fixes from Dave Airlie:
 "Two sets of fixes in here, one for amdgpu, and one for i915.

  The amdgpu ones are pretty small, i915's CI system seems to have a few
  problems in the last week or so, there is one major regression fix for
  fb_mmap, but there are a bunch of other issues fixed in there as well,
  oops, screen flashes and rcu related.

  amdgpu:
   - Remove experimental flag for navi14
   - Fix confusing power message failures on older VI parts
   - Hang fix for gfxoff when using the read register interface
   - Two stability regression fixes for Raven

  i915:
   - Fix kernel oops on dumb_create ioctl on no crtc situation
   - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update
   - Fix unity of the frequencies reported on PMU
   - Fix kernel oops on set_page_dirty using better locks around it
   - Protect the request pointer with RCU to prevent it being freed
     while we might need still
   - Make pool objects read-only
   - Restore physical addresses for fb_map to avoid corrupted page
     table"

* tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/fbdev: Restore physical addresses for fb_mmap()
  Revert "drm/amd/display: enable S/G for RAVEN chip"
  drm/amdgpu: disable gfxoff on original raven
  drm/amdgpu: disable gfxoff when using register read interface
  drm/amd/powerplay: correct fine grained dpm force level setting
  drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICs
  drm/amdgpu: remove experimental flag for Navi14
  drm/i915: make pool objects read-only
  drm/i915: Protect request peeking with RCU
  drm/i915/userptr: Try to acquire the page lock around set_page_dirty()
  drm/i915/pmu: "Frequency" is reported as accumulated cycles
  drm/i915: Preload LUTs if the hw isn't currently using them
  drm/i915: Don't oops in dumb_create ioctl if we have no crtcs

It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in
remove_stable_node() when it races with __mmput() and squeezes in
between ksm_exit() and exit_mmap().

  WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150

  Call Trace:
   remove_all_stable_nodes+0x12b/0x330
   run_store+0x4ef/0x7b0
   kernfs_fop_write+0x200/0x420
   vfs_write+0x154/0x450
   ksys_write+0xf9/0x1d0
   do_syscall_64+0x99/0x510
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Remove the warning as there is nothing scary going on.

Link: http://lkml.kernel.org/r/20191119131850.5675-1-aryabinin@virtuozzo.com
Fixes: cbf86cfe ("ksm: remove old stable nodes more thoroughly")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Let's limit shrinking to !ZONE_DEVICE so we can fix the current code.
We should never try to touch the memmap of offline sections where we
could have uninitialized memmaps and could trigger BUGs when calling
page_to_nid() on poisoned pages.

There is no reliable way to distinguish an uninitialized memmap from an
initialized memmap that belongs to ZONE_DEVICE, as we don't have
anything like SECTION_IS_ONLINE we can use similar to
pfn_to_online_section() for !ZONE_DEVICE memory.

E.g., set_zone_contiguous() similarly relies on pfn_to_online_section()
and will therefore never set a ZONE_DEVICE zone consecutive.  Stopping
to shrink the ZONE_DEVICE therefore results in no observable changes,
besides /proc/zoneinfo indicating different boundaries - something we
can totally live with.

Before commit d0dc12e8 ("mm/memory_hotplug: optimize memory
hotplug"), the memmap was initialized with 0 and the node with the right
value.  So the zone might be wrong but not garbage.  After that commit,
both the zone and the node will be garbage when touching uninitialized
memmaps.

Toshiki reported a BUG (race between delayed initialization of
ZONE_DEVICE memmaps without holding the memory hotplug lock and
concurrent zone shrinking).

  https://lkml.org/lkml/2019/11/14/1040

"Iteration of create and destroy namespace causes the panic as below:

      kernel BUG at mm/page_alloc.c:535!
      CPU: 7 PID: 2766 Comm: ndctl Not tainted 5.4.0-rc4 #6
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
      RIP: 0010:set_pfnblock_flags_mask+0x95/0xf0
      Call Trace:
       memmap_init_zone_device+0x165/0x17c
       memremap_pages+0x4c1/0x540
       devm_memremap_pages+0x1d/0x60
       pmem_attach_disk+0x16b/0x600 [nd_pmem]
       nvdimm_bus_probe+0x69/0x1c0
       really_probe+0x1c2/0x3e0
       driver_probe_device+0xb4/0x100
       device_driver_attach+0x4f/0x60
       bind_store+0xc9/0x110
       kernfs_fop_write+0x116/0x190
       vfs_write+0xa5/0x1a0
       ksys_write+0x59/0xd0
       do_syscall_64+0x5b/0x180
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

  While creating a namespace and initializing memmap, if you destroy the
  namespace and shrink the zone, it will initialize the memmap outside
  the zone and trigger VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page),
  pfn), page) in set_pfnblock_flags_mask()."

This BUG is also mitigated by this commit, where we for now stop to
shrink the ZONE_DEVICE zone until we can do it in a safe and clean way.

Link: http://lkml.kernel.org/r/20191006085646.5768-5-david@redhat.com
Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online")	[visible after d0dc12e8]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>	[4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 56e94ea1.

Commit 56e94ea1 ("fs: ocfs2: fix possible null-pointer dereferences
in ocfs2_xa_prepare_entry()") introduces a regression that fail to
create directory with mount option user_xattr and acl.  Actually the
reported NULL pointer dereference case can be correctly handled by
loc->xl_ops->xlo_add_entry(), so revert it.

Link: http://lkml.kernel.org/r/1573624916-83825-1-git-send-email-joseph.qi@linux.alibaba.com
Fixes: 56e94ea1 ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Acked-by: Changwei Ge <gechangwei@live.cn>
Cc: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The function m_can_runtime_resume() is getting recursively called from
m_can_class_resume(). This results in a lock up.

We need not call m_can_class_resume() during m_can_runtime_resume().

Fixes: f524f829 ("can: m_can: Create a m_can platform framework")
Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com>
Signed-off-by: Sriram Dash <sriram.dash@samsung.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The current code is failing during clock prepare enable because of not
getting proper clock from platform device.

[    0.852089] Call trace:
[    0.854516]  0xffff0000fa22a668
[    0.857638]  clk_prepare+0x20/0x34
[    0.861019]  m_can_runtime_resume+0x2c/0xe4
[    0.865180]  pm_generic_runtime_resume+0x28/0x38
[    0.869770]  __rpm_callback+0x16c/0x1bc
[    0.873583]  rpm_callback+0x24/0x78
[    0.877050]  rpm_resume+0x428/0x560
[    0.880517]  __pm_runtime_resume+0x7c/0xa8
[    0.884593]  m_can_clk_start.isra.9.part.10+0x1c/0xa8
[    0.889618]  m_can_class_register+0x138/0x370
[    0.893950]  m_can_plat_probe+0x120/0x170
[    0.897939]  platform_drv_probe+0x4c/0xa0
[    0.901924]  really_probe+0xd8/0x31c
[    0.905477]  driver_probe_device+0x58/0xe8
[    0.909551]  device_driver_attach+0x68/0x70
[    0.913711]  __driver_attach+0x9c/0xf8
[    0.917437]  bus_for_each_dev+0x50/0xa0
[    0.921251]  driver_attach+0x20/0x28
[    0.924804]  bus_add_driver+0x148/0x1fc
[    0.928617]  driver_register+0x6c/0x124
[    0.932431]  __platform_driver_register+0x48/0x50
[    0.937113]  m_can_plat_driver_init+0x18/0x20
[    0.941446]  do_one_initcall+0x4c/0x19c
[    0.945259]  kernel_init_freeable+0x1d0/0x280
[    0.949591]  kernel_init+0x10/0x100
[    0.953057]  ret_from_fork+0x10/0x18
[    0.956614] Code: 00000000 00000000 00000000 00000000 (fa22a668)
[    0.962681] ---[ end trace 881f71bd609de763 ]---
[    0.967301] Kernel panic - not syncing: Attempted to kill init!

A device driver for CAN controller hardware registers itself with the
Linux network layer as a network device. So, the driver data for m_can
should ideally be of type net_device.

Fixes: f524f829 ("can: m_can: Create a m_can platform framework")
Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com>
Signed-off-by: Sriram Dash <sriram.dash@samsung.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>