- 12 Mar, 2020 29 commits
-
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver was rejecting almost all unsupported parameters already, it was only missing a check for tx_max_coalesced_frames_irq. As a side effect of these changes the error code for unsupported params changes from ENOTSUPP to EOPNOTSUPP. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver was rejecting almost all unsupported parameters already, it was only missing a check for tx_max_coalesced_frames_irq. As a side effect of these changes the error code for unsupported params changes from ENOTSUPP to EOPNOTSUPP. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters (other than adaptive rx, which will now be rejected by core). Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Joe Perches authored
Converting fallthrough comments to fallthrough; creates warnings in this code when compiled with gcc. This code is overly complicated and reads rather better with a little refactoring and no fallthrough uses at all. Remove the fallthrough comments and simplify the written source code while reducing the object code size. Consolidate duplicated switch/case blocks for IPV4 and IPV6. defconfig x86-64 with sfc: $ size drivers/net/ethernet/sfc/ethtool.o* text data bss dec hex filename 10055 12 0 10067 2753 drivers/net/ethernet/sfc/ethtool.o.new 10135 12 0 10147 27a3 drivers/net/ethernet/sfc/ethtool.o.old Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Julian Wiedmann authored
This reverts commit 4cda7527 from net-next. Brown bag time. Michal noticed that this change doesn't work at all when netif_set_real_num_tx_queues() gets called prior to an initial dev_activate(), as for instance igb does. Doing so dies with: [ 40.579142] BUG: kernel NULL pointer dereference, address: 0000000000000400 [ 40.586922] #PF: supervisor read access in kernel mode [ 40.592668] #PF: error_code(0x0000) - not-present page [ 40.598405] PGD 0 P4D 0 [ 40.601234] Oops: 0000 [#1] PREEMPT SMP PTI [ 40.605909] CPU: 18 PID: 1681 Comm: wickedd Tainted: G E 5.6.0-rc3-ethnl.50-default #1 [ 40.616205] Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.R3.27.D685.1305151734 05/15/2013 [ 40.627377] RIP: 0010:qdisc_hash_add.part.22+0x2e/0x90 [ 40.633115] Code: 00 55 53 89 f5 48 89 fb e8 2f 9b fb ff 85 c0 74 44 48 8b 43 40 48 8b 08 69 43 38 47 86 c8 61 c1 e8 1c 48 83 e8 80 48 8d 14 c1 <48> 8b 04 c1 48 8d 4b 28 48 89 53 30 48 89 43 28 48 85 c0 48 89 0a [ 40.654080] RSP: 0018:ffffb879864934d8 EFLAGS: 00010203 [ 40.659914] RAX: 0000000000000080 RBX: ffffffffb8328d80 RCX: 0000000000000000 [ 40.667882] RDX: 0000000000000400 RSI: 0000000000000000 RDI: ffffffffb831faa0 [ 40.675849] RBP: 0000000000000000 R08: ffffa0752c8b9088 R09: ffffa0752c8b9208 [ 40.683816] R10: 0000000000000006 R11: 0000000000000000 R12: ffffa0752d734000 [ 40.691783] R13: 0000000000000008 R14: 0000000000000000 R15: ffffa07113c18000 [ 40.699750] FS: 00007f94548e5880(0000) GS:ffffa0752e980000(0000) knlGS:0000000000000000 [ 40.708782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.715189] CR2: 0000000000000400 CR3: 000000082b6ae006 CR4: 00000000001606e0 [ 40.723156] Call Trace: [ 40.725888] dev_qdisc_set_real_num_tx_queues+0x61/0x90 [ 40.731725] netif_set_real_num_tx_queues+0x94/0x1d0 [ 40.737286] __igb_open+0x19a/0x5d0 [igb] [ 40.741767] __dev_open+0xbb/0x150 [ 40.745567] __dev_change_flags+0x157/0x1a0 [ 40.750240] dev_change_flags+0x23/0x60 [...] Fixes: 4cda7527 ("net: sched: make newly activated qdiscs visible") Reported-by:
Michal Kubecek <mkubecek@suse.cz> CC: Michal Kubecek <mkubecek@suse.cz> CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Alex Elder authored
The definitions for the "qcom,smem-states" and "qcom,smem-state-names" properties need to list their "$ref" under an "allOf" keyword. In addition, fix two problems in the example at the end: - Use #include for header files that define needed symbolic values - Terminate the line that includes the "ipa-shared" register space name with a comma rather than a semicolon Finally, update some white space in the example for better alignment. Signed-off-by:Alex Elder <elder@linaro.org> Signed-off-by:
-
Davide Caratti authored
the following packetdrill script socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3 fcntl(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) > S 0:0(0) <mss 1460,sackOK,TS val 100 ecr 0,nop,wscale 8,mpcapable v1 flags[flag_h] nokey> < S. 0:0(0) ack 1 win 65535 <mss 1460,sackOK,TS val 700 ecr 100,nop,wscale 8,mpcapable v1 flags[flag_h] key[skey=2]> > . 1:1(0) ack 1 win 256 <nop, nop, TS val 100 ecr 700,mpcapable v1 flags[flag_h] key[ckey,skey]> getsockopt(3, SOL_SOCKET, SO_ERROR, [0], [4]) = 0 fcntl(3, F_SETFL, O_RDWR) = 0 write(3, ..., 1000) = 1000 doesn't transmit 1KB data packet after a successful three-way-handshake, using mp_capable with data as required by protocol v1, and write() hangs forever: PID: 973 TASK: ffff97dd399cae80 CPU: 1 COMMAND: "packetdrill" #0 [ffffa9b94062fb78] __schedule at ffffffff9c90a000 #1 [ffffa9b94062fc08] schedule at ffffffff9c90a4a0 #2 [ffffa9b94062fc18] schedule_timeout at ffffffff9c90e00d #3 [ffffa9b94062fc90] wait_woken at ffffffff9c120184 #4 [ffffa9b94062fcb0] sk_stream_wait_connect at ffffffff9c75b064 #5 [ffffa9b94062fd20] mptcp_sendmsg at ffffffff9c8e801c #6 [ffffa9b94062fdc0] sock_sendmsg at ffffffff9c747324 #7 [ffffa9b94062fdd8] sock_write_iter at ffffffff9c7473c7 #8 [ffffa9b94062fe48] new_sync_write at ffffffff9c302976 #9 [ffffa9b94062fed0] vfs_write at ffffffff9c305685 #10 [ffffa9b94062ff00] ksys_write at ffffffff9c305985 #11 [ffffa9b94062ff38] do_syscall_64 at ffffffff9c004475 #12 [ffffa9b94062ff50] entry_SYSCALL_64_after_hwframe at ffffffff9ca0008c RIP: 00007f959407eaf7 RSP: 00007ffe9e95a910 RFLAGS: 00000293 RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f959407eaf7 RDX: 00000000000003e8 RSI: 0000000001785fe0 RDI: 0000000000000008 RBP: 0000000001785fe0 R8: 0000000000000000 R9: 0000000000000003 R10: 0000000000000007 R11: 0000000000000293 R12: 00000000000003e8 R13: 00007ffe9e95ae30 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b Fix it ensuring that socket state is TCP_ESTABLISHED on reception of the third ack. Fixes: 1954b860 ("mptcp: Check connection state before attempting send") Suggested-by:Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Chen Zhou authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/ibm/emac/core.c: In function __emac_mdio_write: drivers/net/ethernet/ibm/emac/core.c:875:9: warning: variable err set but not used [-Wunused-but-set-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports a warning at netlink_seq_start() warning: context imbalance in netlink_seq_start() - wrong count at exit The root cause is the missing annotation at netlink_seq_start() Add the missing __acquires(RCU) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports warning at tcp_child_process() warning: context imbalance in tcp_child_process() - unexpected unlock The root cause is the missing annotation at tcp_child_process() Add the missing __releases(&((child)->sk_lock.slock)) annotation Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports warnings at raw_seq_start() and raw_seq_stop() warning: context imbalance in raw_seq_start() - wrong count at exit warning: context imbalance in raw_seq_stop() - unexpected unlock The root cause is the missing annotations at raw_seq_start() and raw_seq_stop() Add the missing __acquires(&h->lock) annotation Add the missing __releases(&h->lock) annotation Signed-off-by:
-
Julian Wiedmann authored
In their .attach callback, mq[prio] only add the qdiscs of the currently active TX queues to the device's qdisc hash list. If a user later increases the number of active TX queues, their qdiscs are not visible via eg. 'tc qdisc show'. Add a hook to netif_set_real_num_tx_queues() that walks all active TX queues and adds those which are missing to the hash list. CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Pavel Machek authored
No need to play with gotos to jump over single statement. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Jose Abreu authored
Since commit 319a1d19, stmmac only support basic HW stats type for action. Set this field in the L3/L4 Filtering test so that it correctly setups the filter instead of returning EOPNOTSUPP. Fixes: 319a1d19 ("flow_offload: check for basic action hw stats type") Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Alexander Bersenev authored
The NCM specification defines two formats of transfer blocks: with 16-bit fields (NTB-16) and with 32-bit fields (NTB-32). Currently only NTB-16 is implemented. This patch adds the support of NTB-32. The motivation behind this is that some devices such as E5785 or E5885 from the current generation of Huawei LTE routers do not support NTB-16. The previous generations of Huawei devices are also use NTB-32 by default. Also this patch enables NTB-32 by default for Huawei devices. During the 2019 ValdikSS made five attempts to contact Huawei to add the NTB-16 support to their router firmware, but they were unsuccessful. Signed-off-by:
Alexander Bersenev <bay@hackerdom.ru> Signed-off-by:
-
Martin Varghese authored
Reverted commit "2baecda3 bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()" An explicit call to udp_encap_enable is needed as the setup_udp_tunnel_sock does not call udp_encap_enable if the if the socket is of type v6. Bareudp device uses v6 socket to receive v4 & v6 traffic CC: Taehee Yoo <ap420073@gmail.com> Fixes: 2baecda3 ("bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()") Signed-off-by:
Martin Varghese <martin.varghese@nokia.com> Signed-off-by:
-
- 11 Mar, 2020 1 commit
-
-
tangbin authored
In this function, ftgmac100_probe() can be triggered only if the platform_device and platform_driver matches, so the judgement at the beginning is redundant. Signed-off-by:
tangbin <tangbin@cmss.chinamobile.com> Signed-off-by:
-
- 10 Mar, 2020 10 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: consolidate irq coalescing - part 3 Convert more drivers following the groundwork laid in a recent patch set [1] and continued in [2]. The aim of the effort is to consolidate irq coalescing parameter validation in the core. This set converts 15 drivers in drivers/net/ethernet. 3 more conversion sets to come. None of the drivers here checked all unsupported parameters. [1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/ [2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/ ==================== Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
