- 23 Jun, 2021 40 commits
-
-
Rob Clark authored
Wire up support to stall the SMMU on iova fault, and collect a devcore- dump snapshot for easier debugging of faults. Currently this is a6xx-only, but mostly only because so far it is the only one using adreno-smmu-priv. Signed-off-by:
Rob Clark <robdclark@chromium.org> Acked-by:
Jordan Crouse <jordan@cosmicpenguin.net> Link: https://lore.kernel.org/r/20210610214431.539029-6-robdclark@gmail.comSigned-off-by:
-
Rob Clark authored
Add, via the adreno-smmu-priv interface, a way for the GPU to request the SMMU to stall translation on faults, and then later resume the translation, either retrying or terminating the current translation. This will be used on the GPU side to "freeze" the GPU while we snapshot useful state for devcoredump. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210610214431.539029-5-robdclark@gmail.comSigned-off-by:
-
Jordan Crouse authored
Use the new adreno-smmu-priv fault info function to get more SMMU debug registers and print the current TTBR0 to debug per-instance pagetables and figure out which GPU block generated the request. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Jordan Crouse authored
Add a callback in adreno-smmu-priv to read interesting SMMU registers to provide an opportunity for a richer debug experience in the GPU driver. Signed-off-by:
-
Jordan Crouse authored
Call report_iommu_fault() to allow upper-level drivers to register their own fault handlers. Signed-off-by:
Will Deacon <will@kernel.org> Reviewed-by:
-
Samuel Iglesias Gonsalvez authored
While keeping the previous default value for hangcheck period, we allow now the possibility of configuring its value via debugfs. Signed-off-by:
Samuel Iglesias Gonsalvez <siglesias@igalia.com> Link: https://lore.kernel.org/r/20210607104441.184700-1-siglesias@igalia.comSigned-off-by:
-
Jonathan Marek authored
Add adreno_is_{a660,a650_family} helpers and convert update existing adreno_is_a650 usage based on downstream driver's logic (changing into adreno_is_a650_family or adding adreno_is_a660). And add the remaining changes required for A660, again based on the downstream driver: missing GMU allocations, additional register init, dummy hfi BW table, cp protect list, entry in gpulist table, hwcg table, updated a6xx_ucode_check_version check. Signed-off-by:Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20210608172808.11803-6-jonathan@marek.caSigned-off-by:
-
Jonathan Marek authored
See downstream's "disable_tseskip" flag. Signed-off-by:
-
Jonathan Marek authored
downstream msm-5.14 kernel added a write to this register, so match that. Signed-off-by:
-
Jonathan Marek authored
SM8250 AOP firmware already sets up PDC registers for us, and it only needs to be enabled. This path will be used for other newer GPUs. Signed-off-by:
-
Jonathan Marek authored
These aren't used by anything anymore. Signed-off-by:
Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210608172808.11803-2-jonathan@marek.caSigned-off-by:
-
Rob Clark authored
Based on mesa commit daa2ccff7a0201941db3901780d179e2634057d5 Small bit of .c churn in the phy code to adapt to split up of phy related registers. Signed-off-by: -
Dmitry Baryshkov authored
The code does not really use dpu_hw_blk fields, so drop them, making dpu_hw_blk empty structure. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210515190909.1809050-5-dmitry.baryshkov@linaro.orgReviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
-
Dmitry Baryshkov authored
Use struct dpu_hw_merge_3d pointer in struct dpu_hw_pingpong rather than using struct dpu_hw_blk. This is the only user of dpu_hw_blk.id, which will be cleaned in the next patch. Signed-off-by:
-
Dmitry Baryshkov authored
The dpu_hw_blk_destroy() function is empty, so we can drop it now. Signed-off-by:
-
Dmitry Baryshkov authored
Remove all unused dpu_hw_blk features and functions: - dpu_hw_blk_get()/_put() and respective refcounting, - global list of all dpu_hw_blk instances, - dpu_hw_blk_ops and empty implementation inside each hw_blk subdriver. This leaves dpu_hw_blk as a placeholder with just type and index. Signed-off-by:
-
Dmitry Baryshkov authored
In order to ease debugging of DSI host registration issues, print return code of dsi_mgr_setup_components(). Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/dp/dp_link.c:374: warning: expecting prototype for dp_parse_video_pattern_params(). Prototype was for dp_link_parse_video_pattern_params() instead drivers/gpu/drm/msm/dp/dp_link.c:573: warning: expecting prototype for dp_parse_phy_test_params(). Prototype was for dp_link_parse_phy_test_params() instead drivers/gpu/drm/msm/dp/dp_link.c:975: warning: expecting prototype for dp_link_process_downstream_port_status_change(). Prototype was for dp_link_process_ds_port_status_change() instead Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210602143300.2330146-15-lee.jones@linaro.orgReviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Function parameter or member 'dp_catalog' not described in 'dp_catalog_aux_reset' drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Excess function parameter 'aux' description in 'dp_catalog_aux_reset' Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/msm_gem.c:364: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/msm/msm_gem.c:763: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:373: warning: expecting prototype for _dpu_plane_set_panic_lut(). Prototype was for _dpu_plane_set_danger_lut() instead drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:498: warning: expecting prototype for _dpu_plane_set_vbif_qos(). Prototype was for _dpu_plane_set_qos_remap() instead Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by:
-
Stephen Boyd authored
These messages are useful for bringup/early development but in production they don't provide much value. We know what sort of GPU we have and interrupt information can be gathered other ways. This cuts down on lines in the drm debug logs that happen too often, making the debug logs practically useless. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: aravindh@codeaurora.org Cc: Sean Paul <sean@poorly.run> Signed-off-by:
-
Kuogee Hsieh authored
Normal DP suspend operation contains two steps, display off followed by dp suspend, to complete system wide suspending cycle if display is up at that time. In this case, DP phy will be powered off at display off. However there is an exception case that depending on the timing of dongle plug in during system wide suspending, sometimes display off procedure may be skipped and dp suspend was called directly. In this case, dp phy is stay at powered on (phy->power_count = 1) so that at next resume dp driver crash at main link clock enable due to phy is not physically powered on. This patch will call dp_ctrl_off_link_stream() to tear down main link and power off phy at dp_pm_suspend() if main link had been brought up. Changes in V2: -- stashed changes into dp_ctrl.c -- add is_phy_on to monitor phy state Changes in V3: -- delete is_phy_on -- call dp_ctrl_off_link_stream() from dp_pm_suspend() Changes in V4: -- delete changes made at dp_power.c -- move main link status checking to dp_pm_suspend Changes in V5: -- correct commit id at Fixes tag Fixes: 8dbde399044b ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly) Signed-off-by:Kuogee Hsieh <khsieh@codeaurora.org> Tested-by:
-
Shaokun Zhang authored
Function 'dp_catalog_audio_enable' is declared twice, remove the repeated declaration. Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1621945327-10871-1-git-send-email-zhangshaokun@hisilicon.comReviewed-by:
-
Guenter Roeck authored
The result of container_of() operations is never NULL unless the embedded element is the first element of the structure. This is not the case here. The NULL checks on the result of container_of() are therefore unnecessary and misleading. Remove them. This change was made automatically with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210525112904.1747066-1-linux@roeck-us.netReviewed-by:
-
Guenter Roeck authored
The result of container_of() operations is never NULL unless the embedded element is the first element of the structure. This is not the case here. The NULL check on the result of container_of() is therefore unnecessary and misleading. Remove it. This change was made automatically with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> While at it, remove unused but assigned variable hpd in dp_display_usbpd_attention_cb(). Signed-off-by:
-
Arnd Bergmann authored
clang is a little overzealous with warning about a constant conversion in an untaken branch of a ternary expression: drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c:975:48: error: implicit conversion from 'unsigned long long' to 'unsigned long' changes value from 5000000000 to 705032704 [-Werror,-Wconstant-conversion] .max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000UL : ULONG_MAX, ^~~~~~~~~~~~ Rewrite this to use a preprocessor conditional instead to avoid the warning. Fixes: 076437c9 ("drm/msm/dsi: move min/max PLL rate to phy config") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210514213032.575161-1-arnd@kernel.orgReviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
-
Bernard Zhao authored
This patch fix coccicheck warning: drivers/gpu/drm/msm/dp/dp_link.c:848:5-8: Unneeded variable: "ret". Return "0" on line 880 Also remove unneeded function return value check. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Link: https://lore.kernel.org/r/20210407130654.3387-1-bernard@vivo.comReviewed-by:
-
Zhen Lei authored
Fixes the following W=1 kernel build warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function ‘dpu_encoder_phys_cmd_wait_for_commit_done’: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:688:31: warning: variable ‘cmd_enc’ set but not used [-Wunused-but-set-variable] Fixes: fe286893 ("drm/msm/dpu: Remove unused call in wait_for_commit_done") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210407083334.2762-1-thunder.leizhen@huawei.comReviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/dp/dp_display.c: In function ‘dp_display_usbpd_attention_cb’: drivers/gpu/drm/msm/dp/dp_display.c:496:19: warning: variable ‘hpd’ set but not used [-Wunused-but-set-variable] Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by:
-
zuoqilin authored
Remove unneeded variable: "rc". Signed-off-by:
zuoqilin <zuoqilin@yulong.com> Link: https://lore.kernel.org/r/20210318032422.1285-1-zuoqilin1@163.comSigned-off-by:
-
Yangtao Li authored
Use resource-managed OPP API to simplify code. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210314163408.22292-12-digetx@gmail.comReviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Bhaskar Chowdhury authored
s/modueles/modules/ ....two different places Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210318062650.19886-1-unixbhaskar@gmail.comAcked-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
Bhaskar Chowdhury authored
s/poiner/pointer/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/struture/structure/ Signed-off-by:
-
Zhen Lei authored
The error code returned by platform_get_irq() is stored in 'irq', it's forgotten to be copied to 'ret' before being returned. As a result, the value 0 of 'ret' is returned incorrectly. After the above fix is completed, initializing the local variable 'ret' to 0 is no longer needed, remove it. In addition, when dpu_mdss_init() is successfully returned, the value of 'ret' is always 0. Therefore, replace "return ret" with "return 0" to make the code clearer. Fixes: 070e64dc ("drm/msm/dpu: Convert to a chained irq chip") Reported-by:
-
Zhen Lei authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 7f9743ab ("drm/msm: validate display and event threads") Reported-by:
-
Rob Clark authored
Syncing up with -rc6 fixes to avoid conflicts with a660 patches. Signed-off-by: -
Krishna Manikandan authored
Crtc perf update from frame event work can result in wrong bandwidth and clock update from dpu if the work is scheduled after the swap state has happened. Avoid such issues by moving perf update to complete commit once the frame is accepted by the hardware. Fixes: a29c8c02 ("drm/msm/disp/dpu1: fix display underruns during modeset") Signed-off-by:
Krishna Manikandan <mkrishn@codeaurora.org> Tested-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1622092076-5100-1-git-send-email-mkrishn@codeaurora.orgSigned-off-by:
-
Stephen Boyd authored
These prints flood the logs with drm debugging set to enable kms and driver logging (DRM_UT_KMS and DRM_UT_DRIVER). Let's move these prints to the atomic bucket (DRM_UT_ATOMIC) as they're related to the atomic paths. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: aravindh@codeaurora.org Cc: Sean Paul <sean@poorly.run> Signed-off-by:
-
