- 10 Feb, 2022 24 commits
-
-
Sean Christopherson authored
Rename a variety of kvm_x86_op function pointers so that preferred name for vendor implementations follows the pattern <vendor>_<function>, e.g. rename .run() to .vcpu_run() to match {svm,vmx}_vcpu_run(). This will allow vendor implementations to be wired up via the KVM_X86_OP macro. In many cases, VMX and SVM "disagree" on the preferred name, though in reality it's VMX and x86 that disagree as SVM blindly prepended _svm to the kvm_x86_ops name. Justification for using the VMX nomenclature: - set_{irq,nmi} => inject_{irq,nmi} because the helper is injecting an event that has already been "set" in e.g. the vIRR. SVM's relevant VMCB field is even named event_inj, and KVM's stat is irq_injections. - prepare_guest_switch => prepare_switch_to_guest because the former is ambiguous, e.g. it could mean switching between multiple guests, switching from the guest to host, etc... - update_pi_irte => pi_update_irte to allow for matching match the rest of VMX's posted interrupt naming scheme, which is vmx_pi_<blah>(). - start_assignment => pi_start_assignment to again follow VMX's posted interrupt naming scheme, and to provide context for what bit of code might care about an otherwise undescribed "assignment". The "tlb_flush" => "flush_tlb" creates an inconsistency with respect to Hyper-V's "tlb_remote_flush" hooks, but Hyper-V really is the one that's wrong. x86, VMX, and SVM all use flush_tlb, and even common KVM is on a variant of the bandwagon with "kvm_flush_remote_tlbs", e.g. a more appropriate name for the Hyper-V hooks would be flush_remote_tlbs. Leave that change for another time as the Hyper-V hooks always start as NULL, i.e. the name doesn't matter for using kvm-x86-ops.h, and changing all names requires an astounding amount of churn. VMX and SVM function names are intentionally left as is to minimize the diff. Both VMX and SVM will need to rename even more functions in order to fully utilize KVM_X86_OPS, i.e. an additional patch for each is inevitable. No functional change intended. Signed-off-by:Sean Christopherson <seanjc@google.com> Message-Id: <20220128005208.4008533-5-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Remove the export of kvm_x86_tlb_flush_current() as there are no longer any users outside of common x86 code. Signed-off-by:
-
Paolo Bonzini authored
Hypervisor leaves are always synthesized by __do_cpuid_func; just return zeroes and do not ask the host. Even on nested virtualization, a value from another hypervisor would be bogus, because all hypercalls and MSRs are processed by KVM. Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Jinrong Liang authored
The "unsigned long flags" parameter of kvm_pv_kick_cpu_op() is not used, so remove it. No functional change intended. Signed-off-by:
Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220125095909.38122-20-cloudliang@tencent.com> Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of kvm_make_vcpu_request() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm_vcpu *vcpu" parameter of kvm_scale_tsc() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "u16 tss_selector" parameter of task_switch_{16, 32}() is not used, so remove it. No functional change intended. Signed-off-by: -
Jinrong Liang authored
The "struct x86_emulate_ctxt *ctxt" parameter of setup_syscalls_segments() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "unsigned long addr" and "unsigned long length" parameter of ioapic_read_indirect() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "u32 addr" parameter of elcr_ioport_write() and elcr_ioport_read() is not used, so remove it. No functional change intended. Signed-off-by:
-
Paolo Bonzini authored
KVM performs the VMSAVE to the host save area for both regular and SEV-ES guests, so hoist it up to svm_prepare_guest_switch. And because sev_es_prepare_guest_switch does not really need to know the details of struct svm_cpu_data *, just pass it the pointer to the host save area inside the HSAVE page. Signed-off-by: -
Jinrong Liang authored
The "struct kvm_vcpu *vcpu" parameter of svm_check_exit_valid() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "int level" parameter of audit_spte_after_sync() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of kvm_tdp_mmu_get_root() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm_vcpu *vcpu" parameter of reset_ept_shadow_zero_bits_mask() and reset_tdp_shadow_zero_bits_mask() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of __rmap_write_protect() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of kvm_mmu_unlink_parents() is not used, so remove it. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Bail from the APICv update paths _before_ taking apicv_update_lock if APICv is disabled at the module level. kvm_request_apicv_update() in particular is invoked from multiple paths that can be reached without APICv being enabled, e.g. svm_enable_irq_window(), and taking the rw_sem for write when APICv is disabled may introduce unnecessary contention and stalls. Signed-off-by:
-
Sean Christopherson authored
Drop the useless NULL check on kvm_x86_ops.check_apicv_inhibit_reasons when handling an APICv update, both VMX and SVM unconditionally implement the helper and leave it non-NULL even if APICv is disabled at the module level. The latter is a moot point now that __kvm_request_apicv_update() is called if and only if enable_apicv is true. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Unexport __kvm_request_apicv_update(), it's not used by vendor code and should never be used by vendor code. The only reason it's exposed at all is because Hyper-V's SynIC needs to track how many auto-EOIs are in use, and it's convenient to use apicv_update_lock to guard that tracking. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Zap both valid and invalid roots when zapping/unmapping a gfn range, as KVM must ensure it holds no references to the freed page after returning from the unmap operation. Most notably, the TDP MMU doesn't zap invalid roots in mmu_notifier callbacks. This leads to use-after-free and other issues if the mmu_notifier runs to completion while an invalid root zapper yields as KVM fails to honor the requirement that there must be _no_ references to the page after the mmu_notifier returns. The bug is most easily reproduced by hacking KVM to cause a collision between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug exists between kvm_mmu_notifier_invalidate_range_start() and memslot updates as well. Invalidating a root ensures pages aren't accessible by the guest, and KVM won't read or write page data itself, but KVM will trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing a zap of an invalid root _after_ the mmu_notifier returns is fatal. WARNING: CPU: 24 PID: 1496 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:173 [kvm] RIP: 0010:kvm_is_zone_device_pfn+0x96/0xa0 [kvm] Call Trace: <TASK> kvm_set_pfn_dirty+0xa8/0xe0 [kvm] __handle_changed_spte+0x2ab/0x5e0 [kvm] __handle_changed_spte+0x2ab/0x5e0 [kvm] __handle_changed_spte+0x2ab/0x5e0 [kvm] zap_gfn_range+0x1f3/0x310 [kvm] kvm_tdp_mmu_zap_invalidated_roots+0x50/0x90 [kvm] kvm_mmu_zap_all_fast+0x177/0x1a0 [kvm] set_nx_huge_pages+0xb4/0x190 [kvm] param_attr_store+0x70/0x100 module_attr_store+0x19/0x30 kernfs_fop_write_iter+0x119/0x1b0 new_sync_write+0x11c/0x1b0 vfs_write+0x1cc/0x270 ksys_write+0x5f/0xe0 do_syscall_64+0x38/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Fixes: b7cccd39 ("KVM: x86/mmu: Fast invalidation for TDP MMU") Cc: stable@vger.kernel.org Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
Move the check for an invalid root out of kvm_tdp_mmu_get_root() and into the one place it actually matters, tdp_mmu_next_root(), as the other user already has an implicit validity check. A future bug fix will need to get references to invalid roots to honor mmu_notifier requests; there's no point in forcing what will be a common path to open code getting a reference to a root. No functional change intended. Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
Use the common TDP MMU zap helper when handling an MMU notifier unmap event, the two flows are semantically identical. Consolidate the code in preparation for a future bug fix, as both kvm_tdp_mmu_unmap_gfn_range() and __kvm_tdp_mmu_zap_gfn_range() are guilty of not zapping SPTEs in invalid roots. No functional change intended. Cc: stable@vger.kernel.org Signed-off-by:
-
David Woodhouse authored
There are circumstances whem kvm_xen_update_runstate_guest() should not sleep because it ends up being called from __schedule() when the vCPU is preempted: [ 222.830825] kvm_xen_update_runstate_guest+0x24/0x100 [ 222.830878] kvm_arch_vcpu_put+0x14c/0x200 [ 222.830920] kvm_sched_out+0x30/0x40 [ 222.830960] __schedule+0x55c/0x9f0 To handle this, make it use the same trick as __kvm_xen_has_interrupt(), of using the hva from the gfn_to_hva_cache directly. Then it can use pagefault_disable() around the accesses and just bail out if the page is absent (which is unlikely). I almost switched to using a gfn_to_pfn_cache here and bailing out if kvm_map_gfn() fails, like kvm_steal_time_set_preempted() does — but on closer inspection it looks like kvm_map_gfn() will *always* fail in atomic context for a page in IOMEM, which means it will silently fail to make the update every single time for such guests, AFAICT. So I didn't do it that way after all. And will probably fix that one too. Cc: stable@vger.kernel.org Fixes: 30b5c851 ("KVM: x86/xen: Add support for vCPU runstate information") Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <b17a93e5ff4561e57b1238e3e7ccd0b613eb827e.camel@infradead.org> Signed-off-by:
-
- 08 Feb, 2022 9 commits
-
-
Maxim Levitsky authored
asm/svm.h is the correct place for all values that are defined in the SVM spec, and that includes AVIC. Also add some values from the spec that were not defined before and will be soon useful. Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220207155447.840194-10-mlevitsk@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
kvm_apic_update_apicv is called when AVIC is still active, thus IRR bits can be set by the CPU after it is called, and don't cause the irr_pending to be set to true. Also logic in avic_kick_target_vcpu doesn't expect a race with this function so to make it simple, just keep irr_pending set to true and let the next interrupt injection to the guest clear it. Signed-off-by:
-
Maxim Levitsky authored
Fix a corner case in which the L1 hypervisor intercepts interrupts (INTERCEPT_INTR) and either doesn't set virtual interrupt masking (V_INTR_MASKING) or enters a nested guest with EFLAGS.IF disabled prior to the entry. In this case, despite the fact that L1 intercepts the interrupts, KVM still needs to set up an interrupt window to wait before injecting the INTR vmexit. Currently the KVM instead enters an endless loop of 'req_immediate_exit'. Exactly the same issue also happens for SMIs and NMI. Fix this as well. Note that on VMX, this case is impossible as there is only 'vmexit on external interrupts' execution control which either set, in which case both host and guest's EFLAGS.IF are ignored, or not set, in which case no VMexits are delivered. Signed-off-by:
-
Maxim Levitsky authored
KVM already honours few clean bits thus it makes sense to let the nested guest know about it. Note that KVM also doesn't check if the hardware supports clean bits, and therefore nested KVM was already setting clean bits and L0 KVM was already honouring them. Signed-off-by:
-
Maxim Levitsky authored
While RSM induced VM entries are not full VM entries, they still need to be followed by actual VM entry to complete it, unlike setting the nested state. This patch fixes boot of hyperv and SMM enabled windows VM running nested on KVM, which fail due to this issue combined with lack of dirty bit setting. Signed-off-by:
-
Maxim Levitsky authored
While usually, restoring the smm state makes the KVM enter the nested guest thus a different vmcb (vmcb02 vs vmcb01), KVM should still mark it as dirty, since hardware can in theory cache multiple vmcbs. Failure to do so, combined with lack of setting the nested_run_pending (which is fixed in the next patch), might make KVM re-enter vmcb01, which was just exited from, with completely different set of guest state registers (SMM vs non SMM) and without proper dirty bits set, which results in the CPU reusing stale IDTR pointer which leads to a guest shutdown on any interrupt. On the real hardware this usually doesn't happen, but when running nested, L0's KVM does check and honour few dirty bits, causing this issue to happen. This patch fixes boot of hyperv and SMM enabled windows VM running nested on KVM. Signed-off-by:
-
Maxim Levitsky authored
Turns out that due to review feedback and/or rebases I accidentally moved the call to nested_svm_load_cr3 to be too early, before the NPT is enabled, which is very wrong to do. KVM can't even access guest memory at that point as nested NPT is needed for that, and of course it won't initialize the walk_mmu, which is main issue the patch was addressing. Fix this for real. Fixes: 232f75d3 ("KVM: nSVM: call nested_svm_load_cr3 on nested state load") Cc: stable@vger.kernel.org Signed-off-by:
-
Maxim Levitsky authored
When the guest doesn't enable paging, and NPT/EPT is disabled, we use guest't paging CR3's as KVM's shadow paging pointer and we are technically in direct mode as if we were to use NPT/EPT. In direct mode we create SPTEs with user mode permissions because usually in the direct mode the NPT/EPT doesn't need to restrict access based on guest CPL (there are MBE/GMET extenstions for that but KVM doesn't use them). In this special "use guest paging as direct" mode however, and if CR4.SMAP/CR4.SMEP are enabled, that will make the CPU fault on each access and KVM will enter endless loop of page faults. Since page protection doesn't have any meaning in !PG case, just don't passthrough these bits. The fix is the same as was done for VMX in commit: commit 656ec4a4 ("KVM: VMX: fix SMEP and SMAP without EPT") This fixes the boot of windows 10 without NPT for good. (Without this patch, BSP boots, but APs were stuck in endless loop of page faults, causing the VM boot with 1 CPU) Signed-off-by:
-
Sean Christopherson authored
Remove a WARN on an "AVIC IPI invalid target" exit, the WARN is trivial to trigger from guest as it will fail on any destination APIC ID that doesn't exist from the guest's perspective. Don't bother recording anything in the kernel log, the common tracepoint for kvm_avic_incomplete_ipi() is sufficient for debugging. This reverts commit 37ef0c44. Cc: stable@vger.kernel.org Signed-off-by:
-
- 06 Feb, 2022 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Various bug fixes for ext4 fast commit and inline data handling. Also fix regression introduced as part of moving to the new mount API" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: fs/ext4: fix comments mentioning i_mutex ext4: fix incorrect type issue during replay_del_range jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}() ext4: fix potential NULL pointer dereference in ext4_fill_super() jbd2: refactor wait logic for transaction updates into a common function jbd2: cleanup unused functions declarations from jbd2.h ext4: fix error handling in ext4_fc_record_modified_inode() ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin() ext4: fix error handling in ext4_restore_inline_data() ext4: fast commit may miss file actions ext4: fast commit may not fallback for ineligible commit ext4: modify the logic of ext4_mb_new_blocks_simple ext4: prevent used blocks from being allocated during fast commit replay
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix display of grouped aliased events in 'perf stat'. - Add missing branch_sample_type to perf_event_attr__fprintf(). - Apply correct label to user/kernel symbols in branch mode. - Fix 'perf ftrace' system_wide tracing, it has to be set before creating the maps. - Return error if procfs isn't mounted for PID namespaces when synthesizing records for pre-existing processes. - Set error stream of objdump process for 'perf annotate' TUI, to avoid garbling the screen. - Add missing arm64 support to perf_mmap__read_self(), the kernel part got into 5.17. - Check for NULL pointer before dereference writing debug info about a sample. - Update UAPI copies for asound, perf_event, prctl and kvm headers. - Fix a typo in bpf_counter_cgroup.c. * tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf ftrace: system_wide collection is not effective by default libperf: Add arm64 support to perf_mmap__read_self() tools include UAPI: Sync sound/asound.h copy with the kernel sources perf stat: Fix display of grouped aliased events perf tools: Apply correct label to user/kernel symbols in branch mode perf bpf: Fix a typo in bpf_counter_cgroup.c perf synthetic-events: Return error if procfs isn't mounted for PID namespaces perf session: Check for NULL pointer before dereference perf annotate: Set error stream of objdump process for TUI perf tools: Add missing branch_sample_type to perf_event_attr__fprintf() tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync linux/prctl.h with the kernel sources perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync linux/perf_event.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Intel/PT: filters could crash the kernel - Intel: default disable the PMU for SMM, some new-ish EFI firmware has started using CPL3 and the PMU CPL filters don't discriminate against SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM cycles. - Fixup for perf_event_attr::sig_data * tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/pt: Fix crash with stop filters in single-range mode perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures selftests/perf_events: Test modification of perf_event_attr::sig_data perf: Copy perf_event_attr::sig_data on modification x86/perf: Default set FREEZE_ON_SMI for all
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Borislav Petkov: "Fix a potential truncated string warning triggered by gcc12" * tag 'objtool_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix truncated string warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Borislav Petkov: "Remove a bogus warning introduced by the recent PCI MSI irq affinity overhaul" * tag 'irq_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Remove bogus warning in pci_irq_get_affinity()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: "Fix altera and xgene EDAC drivers to propagate the correct error code from platform_get_irq() so that deferred probing still works" * tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/xgene: Fix deferred probing EDAC/altera: Fix deferred probing
-
