Skip to content

L
linux
Switch branch/tag
  1. 21 Oct, 2015 1 commit
  3. 15 Oct, 2015 4 commits
    • Keith Busch's avatar
      NVMe: Fix memory leak on retried commands · 0dfc70c3
      Keith Busch authored 
      Resources are reallocated for requeued commands, so unmap and release
the iod for the failed command.

It's a pretty bad memory leak and causes a kernel hang if you remove a
drive because of a busy dma pool. You'll get messages spewing like this:

  nvme 0000:xx:xx.x: dma_pool_destroy prp list 256, ffff880420dec000 busy

and lock up pci and the driver since removal never completes while
holding a lock.

Cc: stable@vger.kernel.org
Cc: <stable@vger.kernel.org> # 4.0.x-
Signed-off-by: default avatarKeith Busch <keith.busch@intel.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      0dfc70c3
    • Tejun Heo's avatar
      block: don't release bdi while request_queue has live references · b02176f3
      Tejun Heo authored 
      bdi's are initialized in two steps, bdi_init() and bdi_register(), but
destroyed in a single step by bdi_destroy() which, for a bdi embedded
in a request_queue, is called during blk_cleanup_queue() which makes
the queue invisible and starts the draining of remaining usages.

A request_queue's user can access the congestion state of the embedded
bdi as long as it holds a reference to the queue.  As such, it may
access the congested state of a queue which finished
blk_cleanup_queue() but hasn't reached blk_release_queue() yet.
Because the congested state was embedded in backing_dev_info which in
turn is embedded in request_queue, accessing the congested state after
bdi_destroy() was called was fine.  The bdi was destroyed but the
memory region for the congested state remained accessible till the
queue got released.

a13f35e8 ("writeback: don't embed root bdi_writeback_congested in
bdi_writeback") changed the situation.  Now, the root congested state
which is expected to be pinned while request_queue remains accessible
is separately reference counted and the base ref is put during
bdi_destroy().  This means that the root congested state may go away
prematurely while the queue is between bdi_dstroy() and
blk_cleanup_queue(), which was detected by Andrey's KASAN tests.

The root cause of this problem is that bdi doesn't distinguish the two
steps of destruction, unregistration and release, and now the root
congested state actually requires a separate release step.  To fix the
issue, this patch separates out bdi_unregister() and bdi_exit() from
bdi_destroy().  bdi_unregister() is called from blk_cleanup_queue()
and bdi_exit() from blk_release_queue().  bdi_destroy() is now just a
simple wrapper calling the two steps back-to-back.

While at it, the prototype of bdi_destroy() is moved right below
bdi_setup_and_register() so that the counterpart operations are
located together.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Fixes: a13f35e8 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback")
Cc: stable@vger.kernel.org # v4.2+
Reported-and-tested-by: default avatarAndrey Konovalov <andreyknvl@google.com>
Link: http://lkml.kernel.org/g/CAAeHK+zUJ74Zn17=rOyxacHU18SgCfC6bsYW=6kCY5GXJBwGfQ@mail.gmail.comReviewed-by: default avatarJan Kara <jack@suse.com>
Reviewed-by: default avatarJeff Moyer <jmoyer@redhat.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      b02176f3
    • Christoph Hellwig's avatar
      nvme: use an integer value to Linux errno values · 81c04b94
      Christoph Hellwig authored 
      Use a separate integer variable to hold the signed Linux errno
values we pass back to the block layer.  Note that for pass through
commands those might still be NVMe values, but those fit into the
int as well.

Fixes: f4829a9b: ("blk-mq: fix racy updates of rq->errors")
Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      81c04b94
    • Junichi Nomura's avatar
      blk-mq: fix use-after-free in blk_mq_free_tag_set() · f42d79ab
      Junichi Nomura authored 
      tags is freed in blk_mq_free_rq_map() and should not be used after that.
The problem doesn't manifest if CONFIG_CPUMASK_OFFSTACK is false because
free_cpumask_var() is nop.

tags->cpumask is allocated in blk_mq_init_tags() so it's natural to
free cpumask in its counter part, blk_mq_free_tags().

Fixes: f26cdc85 ("blk-mq: Shared tag enhancements")
Signed-off-by: default avatarJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Keith Busch <keith.busch@intel.com>
Reviewed-by: default avatarJeff Moyer <jmoyer@redhat.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      f42d79ab
  5. 12 Oct, 2015 6 commits
    • Arnd Bergmann's avatar
      nvme: fix 32-bit build warning · 835da3f9
      Arnd Bergmann authored 
      Compiling the nvme driver on 32-bit warns about a cast from a __u64
variable to a pointer:

drivers/block/nvme-core.c: In function 'nvme_submit_io':
drivers/block/nvme-core.c:1847:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
    (void __user *)io.addr, length, NULL, 0);

The cast here is intentional and safe, so we can shut up the
gcc warning by adding an intermediate cast to 'uintptr_t'.

I had previously submitted a patch to fix this problem in the
nvme driver, but it was accepted on the same day that two new
warnings got added.

For clarification, I also change the third instance of this cast
to use uintptr_t instead of unsigned long now.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Fixes: d29ec824 ("nvme: submit internal commands through the block layer")
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      835da3f9
    • Tejun Heo's avatar
      writeback: fix incorrect calculation of available memory for memcg domains · c5edf9cd
      Tejun Heo authored 
      For memcg domains, the amount of available memory was calculated as

 min(the amount currently in use + headroom according to memcg,
     total clean memory)

This isn't quite correct as what should be capped by the amount of
clean memory is the headroom, not the sum of memory in use and
headroom.  For example, if a memcg domain has a significant amount of
dirty memory, the above can lead to a value which is lower than the
current amount in use which doesn't make much sense.  In most
circumstances, the above leads to a number which is somewhat but not
drastically lower.

As the amount of memory which can be readily allocated to the memcg
domain is capped by the amount of system-wide clean memory which is
not already assigned to the memcg itself, the number we want is

 the amount currently in use +
 min(headroom according to memcg, clean memory elsewhere in the system)

This patch updates mem_cgroup_wb_stats() to return the number of
filepages and headroom instead of the calculated available pages.
mdtc_cap_avail() is renamed to mdtc_calc_avail() and performs the
above calculation from file, headroom, dirty and globally clean pages.

v2: Dummy mem_cgroup_wb_stats() implementation wasn't updated leading
    to build failure when !CGROUP_WRITEBACK.  Fixed.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Fixes: c2aa723a ("writeback: implement memcg writeback domain based throttling")
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      c5edf9cd
    • Tejun Heo's avatar
      writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions · d60d1bdd
      Tejun Heo authored 
      MDTC_INIT() is used to initialize dirty_throttle_control for memcg
domains.  It used DTC_INIT_COMMON() to initialized mdtc->wb and
->wb_completions which is incorrect as DTC_INIT_COMMON() sets the
latter to wb->completions instead of wb->memcg_completions.  This can
lead to wildly incorrect results when calculating the proportion of
dirty memory the memcg domain should get.

Remove DTC_INIT_COMMON() and update MDTC_INIT() to initialize
mdtc->wb_completions to wb->memcg_completions.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Fixes: c2aa723a ("writeback: implement memcg writeback domain based throttling")
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      d60d1bdd
    • Tejun Heo's avatar
      writeback: bdi_writeback iteration must not skip dying ones · b817525a
      Tejun Heo authored 
      bdi_for_each_wb() is used in several places to wake up or issue
writeback work items to all wb's (bdi_writeback's) on a given bdi.
The iteration is performed by walking bdi->cgwb_tree; however, the
tree only indexes wb's which are currently active.

For example, when a memcg gets associated with a different blkcg, the
old wb is removed from the tree so that the new one can be indexed.
The old wb starts dying from then on but will linger till all its
inodes are drained.  As these dying wb's may still host dirty inodes,
writeback operations which affect all wb's must include them.
bdi_for_each_wb() skipping dying wb's led to sync(2) missing and
failing to sync the inodes belonging to those wb's.

This patch adds a RCU protected @bdi->wb_list which lists all wb's
beloinging to that bdi.  wb's are added on creation and removed on
release rather than on the start of destruction.  bdi_for_each_wb()
usages are replaced with list_for_each[_continue]_rcu() iterations
over @bdi->wb_list and bdi_for_each_wb() and its helpers are removed.

v2: Updated as per Jan.  last_wb ref leak in bdi_split_work_to_wbs()
    fixed and unnecessary list head severing in cgwb_bdi_destroy()
    removed.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Reported-and-tested-by: default avatarArtem Bityutskiy <dedekind1@gmail.com>
Fixes: ebe41ab0 ("writeback: implement bdi_for_each_wb()")
Link: http://lkml.kernel.org/g/1443012552.19983.209.camel@gmail.com
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      b817525a
    • Tejun Heo's avatar
      writeback: fix bdi_writeback iteration in wakeup_dirtytime_writeback() · 6fdf860f
      Tejun Heo authored 
      wakeup_dirtytime_writeback() walks and wakes up all wb's of all bdi's;
unfortunately, it was always waking up bdi->wb instead of the wb being
walked.  Fix it.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Fixes: 001fe6f6 ("writeback: make wakeup_dirtytime_writeback() handle multiple bdi_writeback's")
Reviewed-by: default avatarJan Kara <jack@suse.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      6fdf860f
    • Tejun Heo's avatar
      writeback: laptop_mode_timer_fn() needs rcu_read_lock() around bdi_writeback iteration · 9ad18ab9
      Tejun Heo authored 
      laptop_mode_timer_fn() was using bdi_for_each_wb() without the
required RCU locking leading to the following warning.

 WARNING: CPU: 0 PID: 0 at include/linux/backing-dev.h:415 laptop_mode_timer_fn+0x106/0x170()
 ...
 Call Trace:
  <IRQ>  [<ffffffff81480cdc>] dump_stack+0x4e/0x82
  [<ffffffff81051912>] warn_slowpath_common+0x82/0xc0
  [<ffffffff81051a0a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8115f0e6>] laptop_mode_timer_fn+0x106/0x170
  [<ffffffff810ca8e3>] call_timer_fn+0xb3/0x2f0
  [<ffffffff810cad25>] run_timer_softirq+0x205/0x370
  [<ffffffff81056854>] __do_softirq+0xd4/0x460
  [<ffffffff81056d69>] irq_exit+0x89/0xa0
  [<ffffffff8185a892>] smp_apic_timer_interrupt+0x42/0x50
  [<ffffffff81858a44>] apic_timer_interrupt+0x84/0x90
 ...

Fix it by adding rcu_read_lock() around the iteration.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Fixes: a06fd6b1 ("writeback: make laptop_mode_timer_fn() handle multiple bdi_writeback's")
Reviewed-by: default avatarJan Kara <jack@suse.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      9ad18ab9
  7. 08 Oct, 2015 1 commit
  9. 07 Oct, 2015 10 commits
  11. 06 Oct, 2015 10 commits
  13. 04 Oct, 2015 6 commits
    • Linus Torvalds's avatar
      Linux 4.3-rc4 · 049e6dde
      Linus Torvalds authored
      049e6dde
    • Linus Torvalds's avatar
      Merge branch 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile · 30c44659
      Linus Torvalds authored 
      Pull strscpy string copy function implementation from Chris Metcalf.

Chris sent this during the merge window, but I waffled back and forth on
the pull request, which is why it's going in only now.

The new "strscpy()" function is definitely easier to use and more secure
than either strncpy() or strlcpy(), both of which are horrible nasty
interfaces that have serious and irredeemable problems.

strncpy() has a useless return value, and doesn't NUL-terminate an
overlong result.  To make matters worse, it pads a short result with
zeroes, which is a performance disaster if you have big buffers.

strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking
the insane NUL padding, but having a differently broken return value
which returns the original length of the source string.  Which means
that it will read characters past the count from the source buffer, and
you have to trust the source to be properly terminated.  It also makes
error handling fragile, since the test for overflow is unnecessarily
subtle.

strscpy() avoids both these problems, guaranteeing the NUL termination
(but not excessive padding) if the destination size wasn't zero, and
making the overflow condition very obvious by returning -E2BIG.  It also
doesn't read past the size of the source, and can thus be used for
untrusted source data too.

So why did I waffle about this for so long?

Every time we introduce a new-and-improved interface, people start doing
these interminable series of trivial conversion patches.

And every time that happens, somebody does some silly mistake, and the
conversion patch to the improved interface actually makes things worse.
Because the patch is mindnumbing and trivial, nobody has the attention
span to look at it carefully, and it's usually done over large swatches
of source code which means that not every conversion gets tested.

So I'm pulling the strscpy() support because it *is* a better interface.
But I will refuse to pull mindless conversion patches.  Use this in
places where it makes sense, but don't do trivial patches to fix things
that aren't actually known to be broken.

* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: use global strscpy() rather than private copy
  string: provide strscpy()
  Make asm/word-at-a-time.h available on all architectures
      30c44659
    • Linus Torvalds's avatar
      Merge tag 'md/4.3-fixes' of git://neil.brown.name/md · 15ecf9a9
      Linus Torvalds authored 
      Pull md fixes from Neil Brown:
 "Assorted fixes for md in 4.3-rc.

  Two tagged for -stable, and one is really a cleanup to match and
  improve kmemcache interface.

* tag 'md/4.3-fixes' of git://neil.brown.name/md:
  md/bitmap: don't pass -1 to bitmap_storage_alloc.
  md/raid1: Avoid raid1 resync getting stuck
  md: drop null test before destroy functions
  md: clear CHANGE_PENDING in readonly array
  md/raid0: apply base queue limits *before* disk_stack_limits
  md/raid5: don't index beyond end of array in need_this_block().
  raid5: update analysis state for failed stripe
  md: wait for pending superblock updates before switching to read-only
      15ecf9a9
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 0d877081
      Linus Torvalds authored 
      Pull MIPS updates from Ralf Baechle:
 "This week's round of MIPS fixes:
   - Fix JZ4740 build
   - Fix fallback to GFP_DMA
   - FP seccomp in case of ENOSYS
   - Fix bootmem panic
   - A number of FP and CPS fixes
   - Wire up new syscalls
   - Make sure BPF assembler objects can properly be disassembled
   - Fix BPF assembler code for MIPS I"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: scall: Always run the seccomp syscall filters
  MIPS: Octeon: Fix kernel panic on startup from memory corruption
  MIPS: Fix R2300 FP context switch handling
  MIPS: Fix octeon FP context switch handling
  MIPS: BPF: Fix load delay slots.
  MIPS: BPF: Do all exports of symbols with FEXPORT().
  MIPS: Fix the build on jz4740 after removing the custom gpio.h
  MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT
  MIPS: CPS: Don't include MT code in non-MT kernels.
  MIPS: CPS: Stop dangling delay slot from has_mt.
  MIPS: dma-default: Fix 32-bit fall back to GFP_DMA
  MIPS: Wire up userfaultfd and membarrier syscalls.
      0d877081
    • Linus Torvalds's avatar
      Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 3e519dde
      Linus Torvalds authored 
      Pull irq fixes from Thomas Gleixner:
 "This update contains:

   - Fix for a long standing race affecting /proc/irq/NNN

   - One line fix for ARM GICV3-ITS counting the wrong data

   - Warning silencing in ARM GICV3-ITS.  Another GCC trying to be
     overly clever issue"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Count additional LPIs for the aliased devices
  irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlined
  genirq: Fix race in register_irq_proc()
      3e519dde
    • Markos Chandras's avatar
      MIPS: scall: Always run the seccomp syscall filters · d218af78
      Markos Chandras authored 
      The MIPS syscall handler code used to return -ENOSYS on invalid
syscalls. Whilst this is expected, it caused problems for seccomp
filters because the said filters never had the change to run since
the code returned -ENOSYS before triggering them. This caused
problems on the chromium testsuite for filters looking for invalid
syscalls. This has now changed and the seccomp filters are always
run even if the syscall is invalid. We return -ENOSYS once we
return from the seccomp filters. Moreover, similar codepaths have
been merged in the process which simplifies somewhat the overall
syscall code.
Signed-off-by: default avatarMarkos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11236/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      d218af78
  15. 03 Oct, 2015 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7