- 29 Mar, 2020 2 commits
-
-
Toke Høiland-Jørgensen authored
For internal maps (most notably the maps backing global variables), libbpf uses an internal mmaped area to store the data after opening the object. This data is subsequently copied into the kernel map when the object is loaded. This adds a function to set a new value for that data, which can be used to before it is loaded into the kernel. This is especially relevant for RODATA maps, since those are frozen on load. Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200329132253.232541-1-toke@redhat.com
-
Daniel Borkmann authored
Fix a redefinition of 'net_gen_cookie' error that was overlooked when net ns is not configured. Fixes: f318903c ("bpf: Add netns cookie and enable it for bpf cgroup hooks") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
- 28 Mar, 2020 15 commits
-
-
Alexei Starovoitov authored
Toke Høiland-Jørgensen says: ==================== This series adds support for atomically replacing the XDP program loaded on an interface. This is achieved by means of a new netlink attribute that can specify the expected previous program to replace on the interface. If set, the kernel will compare this "expected fd" attribute with the program currently loaded on the interface, and reject the operation if it does not match. With this primitive, userspace applications can avoid stepping on each other's toes when simultaneously updating the loaded XDP program. Changelog: v4: - Switch back to passing FD instead of ID (Andrii) - Rename flag to XDP_FLAGS_REPLACE (for consistency with other similar uses) v3: - Pass existing ID instead of FD (Jakub) - Use opts struct for new libbpf function (Andrii) v2: - Fix checkpatch nits and add .strict_start_type to netlink policy (Jakub) ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Toke Høiland-Jørgensen authored
This adds tests for the various replacement operations using IFLA_XDP_EXPECTED_FD. Signed-off-by:
-
Toke Høiland-Jørgensen authored
This adds a new function to set the XDP fd while specifying the FD of the program to replace, using the newly added IFLA_XDP_EXPECTED_FD netlink parameter. The new function uses the opts struct mechanism to be extendable in the future. Signed-off-by:
-
Toke Høiland-Jørgensen authored
This adds the IFLA_XDP_EXPECTED_FD netlink attribute definition and the XDP_FLAGS_REPLACE flag to if_link.h in tools/include. Signed-off-by:
-
Toke Høiland-Jørgensen authored
While it is currently possible for userspace to specify that an existing XDP program should not be replaced when attaching to an interface, there is no mechanism to safely replace a specific XDP program with another. This patch adds a new netlink attribute, IFLA_XDP_EXPECTED_FD, which can be set along with IFLA_XDP_FD. If set, the kernel will check that the program currently loaded on the interface matches the expected one, and fail the operation if it does not. This corresponds to a 'cmpxchg' memory operation. Setting the new attribute with a negative value means that no program is expected to be attached, which corresponds to setting the UPDATE_IF_NOEXIST flag. A new companion flag, XDP_FLAGS_REPLACE, is also added to explicitly request checking of the EXPECTED_FD attribute. This is needed for userspace to discover whether the kernel supports the new attribute. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/158515700640.92963.3551295145441017022.stgit@toke.dk
-
Jean-Philippe Menil authored
Fix build warnings when building net/bpf/test_run.o with W=1 due to missing prototype for bpf_fentry_test{1..6}. Instead of declaring prototypes, turn off warnings with __diag_{push,ignore,pop} as pointed out by Alexei. Signed-off-by:Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by:
-
Fletcher Dunn authored
Fix a sharp edge in xsk_umem__create and xsk_socket__create. Almost all of the members of the ring buffer structs are initialized, but the "cached_xxx" variables are not all initialized. The caller is required to zero them. This is needlessly dangerous. The results if you don't do it can be very bad. For example, they can cause xsk_prod_nb_free and xsk_cons_nb_avail to return values greater than the size of the queue. xsk_ring_cons__peek can return an index that does not refer to an item that has been queued. I have confirmed that without this change, my program misbehaves unless I memset the ring buffers to zero before calling the function. Afterwards, my program works without (or with) the memset. Signed-off-by:
Fletcher Dunn <fletcherd@valvesoftware.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/85f12913cde94b19bfcb598344701c38@valvesoftware.com
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== This adds various straight-forward helper improvements and additions to BPF cgroup based connect(), sendmsg(), recvmsg() and bind-related hooks which would allow to implement more fine-grained policies and improve current load balancer limitations we're seeing. For details please see individual patches. I've tested them on Kubernetes & Cilium and also added selftests for the small verifier extension. Thanks! ==================== Signed-off-by: -
Daniel Borkmann authored
Add various tests to make sure the verifier keeps catching them: # ./test_verifier [...] #230/p pass ctx or null check, 1: ctx OK #231/p pass ctx or null check, 2: null OK #232/p pass ctx or null check, 3: 1 OK #233/p pass ctx or null check, 4: ctx - const OK #234/p pass ctx or null check, 5: null (connect) OK #235/p pass ctx or null check, 6: null (bind) OK #236/p pass ctx or null check, 7: ctx (bind) OK #237/p pass ctx or null check, 8: null (bind) OK [...] Summary: 1595 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by:
-
Daniel Borkmann authored
We already have the bpf_get_current_uid_gid() helper enabled, and given we now have perf event RB output available for connect(), sendmsg(), recvmsg() and bind-related hooks, add a trivial change to enable bpf_get_current_pid_tgid() and bpf_get_current_comm() as well. Signed-off-by:
-
Daniel Borkmann authored
Enable the bpf_get_current_cgroup_id() helper for connect(), sendmsg(), recvmsg() and bind-related hooks in order to retrieve the cgroup v2 context which can then be used as part of the key for BPF map lookups, for example. Given these hooks operate in process context 'current' is always valid and pointing to the app that is performing mentioned syscalls if it's subject to a v2 cgroup. Also with same motivation of commit 77236281 ("bpf: Introduce bpf_skb_ancestor_cgroup_id helper") enable retrieval of ancestor from current so the cgroup id can be used for policy lookups which can then forbid connect() / bind(), for example. Signed-off-by:
-
Daniel Borkmann authored
Today, Kubernetes is still operating on cgroups v1, however, it is possible to retrieve the task's classid based on 'current' out of connect(), sendmsg(), recvmsg() and bind-related hooks for orchestrators which attach to the root cgroup v2 hook in a mixed env like in case of Cilium, for example, in order to then correlate certain pod traffic and use it as part of the key for BPF map lookups. Signed-off-by:
-
Daniel Borkmann authored
In Cilium we're mainly using BPF cgroup hooks today in order to implement kube-proxy free Kubernetes service translation for ClusterIP, NodePort (*), ExternalIP, and LoadBalancer as well as HostPort mapping [0] for all traffic between Cilium managed nodes. While this works in its current shape and avoids packet-level NAT for inter Cilium managed node traffic, there is one major limitation we're facing today, that is, lack of netns awareness. In Kubernetes, the concept of Pods (which hold one or multiple containers) has been built around network namespaces, so while we can use the global scope of attaching to root BPF cgroup hooks also to our advantage (e.g. for exposing NodePort ports on loopback addresses), we also have the need to differentiate between initial network namespaces and non-initial one. For example, ExternalIP services mandate that non-local service IPs are not to be translated from the host (initial) network namespace as one example. Right now, we have an ugly work-around in place where non-local service IPs for ExternalIP services are not xlated from connect() and friends BPF hooks but instead via less efficient packet-level NAT on the veth tc ingress hook for Pod traffic. On top of determining whether we're in initial or non-initial network namespace we also have a need for a socket-cookie like mechanism for network namespaces scope. Socket cookies have the nice property that they can be combined as part of the key structure e.g. for BPF LRU maps without having to worry that the cookie could be recycled. We are planning to use this for our sessionAffinity implementation for services. Therefore, add a new bpf_get_netns_cookie() helper which would resolve both use cases at once: bpf_get_netns_cookie(NULL) would provide the cookie for the initial network namespace while passing the context instead of NULL would provide the cookie from the application's network namespace. We're using a hole, so no size increase; the assignment happens only once. Therefore this allows for a comparison on initial namespace as well as regular cookie usage as we have today with socket cookies. We could later on enable this helper for other program types as well as we would see need. (*) Both externalTrafficPolicy={Local|Cluster} types [0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.cSigned-off-by: -
Daniel Borkmann authored
Currently, connect(), sendmsg(), recvmsg() and bind-related hooks are all lacking perf event rb output in order to push notifications or monitoring events up to user space. Back in commit a5a3a828 ("bpf: add perf event notificaton support for sock_ops"), I've worked with Sowmini to enable them for sock_ops where the context part is not used (as opposed to skbs for example where the packet data can be appended). Make the bpf_sockopt_event_output() helper generic and enable it for mentioned hooks. Signed-off-by:
-
Daniel Borkmann authored
We currently make heavy use of the socket cookie in BPF's connect(), sendmsg() and recvmsg() hooks for load-balancing decisions. However, it is currently not enabled/implemented in BPF {post-}bind hooks where it can later be used in combination for correlation in the tc egress path, for example. Signed-off-by:
-
- 26 Mar, 2020 6 commits
-
-
YueHaibing authored
kernel/bpf/syscall.c:2263:34: warning: 'bpf_xdp_link_lops' defined but not used [-Wunused-const-variable=] static const struct bpf_link_ops bpf_xdp_link_lops; ^~~~~~~~~~~~~~~~~ commit 70ed506c ("bpf: Introduce pinnable bpf_link abstraction") involded this unused variable, remove it. Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Andrii Nakryiko authored
Factor out logic mapping expected program attach type to program type and subsequent handling of program attach/detach. Also list out all supported cgroup BPF program types explicitly to prevent accidental bugs once more program types are added to a mapping. Do the same for prog_query API. Signed-off-by:
-
Andrii Nakryiko authored
Refactor cgroup attach/detach code to abstract away common operations performed on all types of cgroup storages. This makes high-level logic more apparent, plus allows to reuse more code across multiple functions. Signed-off-by:
-
John Fastabend authored
After changes to add update_reg_bounds after ALU ops and adding ALU32 bounds tracking the error message is changed in the 32-bit right shift tests. Test "#70/u bounds check after 32-bit right shift with 64-bit input FAIL" now fails with, Unexpected error message! EXP: R0 invalid mem access RES: func#0 @0 7: (b7) r1 = 2 8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP2 R10=fp0 fp-8_w=mmmmmmmm 8: (67) r1 <<= 31 9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967296 R10=fp0 fp-8_w=mmmmmmmm 9: (74) w1 >>= 31 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm 10: (14) w1 -= 2 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967294 R10=fp0 fp-8_w=mmmmmmmm 11: (0f) r0 += r1 math between map_value pointer and 4294967294 is not allowed And test "#70/p bounds check after 32-bit right shift with 64-bit input FAIL" now fails with, Unexpected error message! EXP: R0 invalid mem access RES: func#0 @0 7: (b7) r1 = 2 8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv2 R10=fp0 fp-8_w=mmmmmmmm 8: (67) r1 <<= 31 9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967296 R10=fp0 fp-8_w=mmmmmmmm 9: (74) w1 >>= 31 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv0 R10=fp0 fp-8_w=mmmmmmmm 10: (14) w1 -= 2 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967294 R10=fp0 fp-8_w=mmmmmmmm 11: (0f) r0 += r1 last_idx 11 first_idx 0 regs=2 stack=0 before 10: (14) w1 -= 2 regs=2 stack=0 before 9: (74) w1 >>= 31 regs=2 stack=0 before 8: (67) r1 <<= 31 regs=2 stack=0 before 7: (b7) r1 = 2 math between map_value pointer and 4294967294 is not allowed Before this series we did not trip the "math between map_value pointer..." error because check_reg_sane_offset is never called in adjust_ptr_min_max_vals(). Instead we have a register state that looks like this at line 11*, 11: R0_w=map_value(id=0,off=0,ks=8,vs=8, smin_value=0,smax_value=0, umin_value=0,umax_value=0, var_off=(0x0; 0x0)) R1_w=invP(id=0, smin_value=0,smax_value=4294967295, umin_value=0,umax_value=4294967295, var_off=(0xfffffffe; 0x0)) R10=fp(id=0,off=0, smin_value=0,smax_value=0, umin_value=0,umax_value=0, var_off=(0x0; 0x0)) fp-8_w=mmmmmmmm 11: (0f) r0 += r1 In R1 'smin_val != smax_val' yet we have a tnum_const as seen by 'var_off(0xfffffffe; 0x0))' with a 0x0 mask. So we hit this check in adjust_ptr_min_max_vals() if ((known && (smin_val != smax_val || umin_val != umax_val)) || smin_val > smax_val || umin_val > umax_val) { /* Taint dst register if offset had invalid bounds derived from * e.g. dead branches. */ __mark_reg_unknown(env, dst_reg); return 0; } So we don't throw an error here and instead only throw an error later in the verification when the memory access is made. The root cause in verifier without alu32 bounds tracking is having 'umin_value = 0' and 'umax_value = U64_MAX' from BPF_SUB which we set when 'umin_value < umax_val' here, if (dst_reg->umin_value < umax_val) { /* Overflow possible, we know nothing */ dst_reg->umin_value = 0; dst_reg->umax_value = U64_MAX; } else { ...} Later in adjust_calar_min_max_vals we previously did a coerce_reg_to_size() which will clamp the U64_MAX to U32_MAX by truncating to 32bits. But either way without a call to update_reg_bounds the less precise bounds tracking will fall out of the alu op verification. After latest changes we now exit adjust_scalar_min_max_vals with the more precise umin value, due to zero extension propogating bounds from alu32 bounds into alu64 bounds and then calling update_reg_bounds. This then causes the verifier to trigger an earlier error and we get the error in the output above. This patch updates tests to reflect new error message. * I have a local patch to print entire verifier state regardless if we believe it is a constant so we can get a full picture of the state. Usually if tnum_is_const() then bounds are also smin=smax, etc. but this is not always true and is a bit subtle. Being able to see these states helps understand dataflow imo. Let me know if we want something similar upstream. Signed-off-by:John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
John Fastabend authored
Currently, for all op verification we call __red_deduce_bounds() and __red_bound_offset() but we only call __update_reg_bounds() in bitwise ops. However, we could benefit from calling __update_reg_bounds() in BPF_ADD, BPF_SUB, and BPF_MUL cases as well. For example, a register with state 'R1_w=invP0' when we subtract from it, w1 -= 2 Before coerce we will now have an smin_value=S64_MIN, smax_value=U64_MAX and unsigned bounds umin_value=0, umax_value=U64_MAX. These will then be clamped to S32_MIN, U32_MAX values by coerce in the case of alu32 op as done in above example. However tnum will be a constant because the ALU op is done on a constant. Without update_reg_bounds() we have a scenario where tnum is a const but our unsigned bounds do not reflect this. By calling update_reg_bounds after coerce to 32bit we further refine the umin_value to U64_MAX in the alu64 case or U32_MAX in the alu32 case above. Signed-off-by:
-
John Fastabend authored
Pull per op ALU logic into individual functions. We are about to add u32 versions of each of these by pull them out the code gets a bit more readable here and nicer in the next patch. Signed-off-by:
-
- 25 Mar, 2020 3 commits
-
-
Stanislav Fomichev authored
For each prog/btf load we allocate and free 16 megs of verifier buffer. On production systems it doesn't really make sense because the programs/btf have gone through extensive testing and (mostly) guaranteed to successfully load. Let's assume successful case by default and skip buffer allocation on the first try. If there is an error, start with BPF_LOG_BUF_SIZE and double it on each ENOSPC iteration. v3: * Return -ENOMEM when can't allocate log buffer (Andrii Nakryiko) v2: * Don't allocate the buffer at all on the first try (Andrii Nakryiko) Signed-off-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
Tobias Klauser authored
Has been unused since commit ef99b02b ("libbpf: capture value in BTF type info for BTF-defined map defs"). Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Acked-by:
-
Andrey Ignatov authored
It's a follow-up for discussion in [1]. drgn tool bpf_inspect.py was merged to drgn repo in [2]. Document it in kernel tree to make BPF developers aware that the tool exists and can help with getting BPF state unavailable via UAPI. For now it's just one tool but the doc is written in a way that allows to cover more tools in the future if needed. Please refer to the doc itself for more details. The patch was tested by `make htmldocs` and sanity-checking that resulting html looks good. v2 -> v3: - two sections: "Description" and "Getting started" (Daniel); - add examples in "Getting started" section (Daniel); - add "Customization" section to show how tool can be customized. v1 -> v2: - better "BPF drgn tools" section (Alexei) [1] https://lore.kernel.org/bpf/20200228201514.GB51456@rdna-mbp/T/#mefed65e8a98116bd5d07d09a570a3eac46724951 [2] https://github.com/osandov/drgn/pull/49Signed-off-by:
Andrey Ignatov <rdna@fb.com> Signed-off-by:
-
- 23 Mar, 2020 4 commits
-
-
Daniel T. Lee authored
The bpf_program__attach of libbpf(using bpf_link) is much more intuitive than the previous method using ioctl. bpf_program__attach_perf_event manages the enable of perf_event and attach of BPF programs to it, so there's no neeed to do this directly with ioctl. In addition, bpf_link provides consistency in the use of API because it allows disable (detach, destroy) for multiple events to be treated as one bpf_link__destroy. Also, bpf_link__destroy manages the close() of perf_event fd. This commit refactors samples that attach the bpf program to perf_event by using libbbpf instead of ioctl. Also the bpf_load in the samples were removed and migrated to use libbbpf API. Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by:
-
Daniel T. Lee authored
To reduce the reliance of trace samples (trace*_user) on bpf_load, move read_trace_pipe to trace_helpers. By moving this bpf_loader helper elsewhere, trace functions can be easily migrated to libbbpf. Signed-off-by:
-
Martin KaFai Lau authored
This patch adds test to exercise the bpf_sk_storage_get() and bpf_sk_storage_delete() helper from the bpf_dctcp.c. The setup and check on the sk_storage is done immediately before and after the connect(). This patch also takes this chance to move the pthread_create() after the connect() has been done. That will remove the need of the "wait_thread" label. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200320152107.2169904-1-kafai@fb.com
-
Martin KaFai Lau authored
This patch adds bpf_sk_storage_get() and bpf_sk_storage_delete() helper to the bpf_tcp_ca's struct_ops. That would allow bpf-tcp-cc to: 1) share sk private data with other bpf progs. 2) use bpf_sk_storage as a private storage for a bpf-tcp-cc if the existing icsk_ca_priv is not big enough. Signed-off-by:
-
- 20 Mar, 2020 7 commits
-
-
Bill Wendling authored
Clang's -Wmisleading-indentation warns about misleading indentations if there's a mixture of spaces and tabs. Remove extraneous spaces. Signed-off-by:
Bill Wendling <morbo@google.com> Signed-off-by:
-
YueHaibing authored
After commit f747632b ("bpf: sockmap: Move generic sockmap hooks from BPF TCP"), tcp_bpf_recvmsg() is not used out of tcp_bpf.c, so make it static and remove it from tcp.h. Also move it to BPF_STREAM_PARSER #ifdef to fix unused function warnings. Fixes: f747632b ("bpf: sockmap: Move generic sockmap hooks from BPF TCP") Signed-off-by:
-
YueHaibing authored
If BPF_STREAM_PARSER is not set, gcc warns: net/ipv4/tcp_bpf.c:483:12: warning: 'tcp_bpf_sendpage' defined but not used [-Wunused-function] net/ipv4/tcp_bpf.c:395:12: warning: 'tcp_bpf_sendmsg' defined but not used [-Wunused-function] net/ipv4/tcp_bpf.c:13:13: warning: 'tcp_bpf_stream_read' defined but not used [-Wunused-function] Moves the unused functions into the #ifdef CONFIG_BPF_STREAM_PARSER. Fixes: f747632b ("bpf: sockmap: Move generic sockmap hooks from BPF TCP") Reported-by:
Lorenz Bauer <lmb@cloudflare.com> Reviewed-by:
Jakub Sitnicki <jakub@cloudflare.com> Acked-by:
-
Martin KaFai Lau authored
This patch adds struct_ops support to the bpftool. To recap a bit on the recent bpf_struct_ops feature on the kernel side: It currently supports "struct tcp_congestion_ops" to be implemented in bpf. At a high level, bpf_struct_ops is struct_ops map populated with a number of bpf progs. bpf_struct_ops currently supports the "struct tcp_congestion_ops". However, the bpf_struct_ops design is generic enough that other kernel struct ops can be supported in the future. Although struct_ops is map+progs at a high lever, there are differences in details. For example, 1) After registering a struct_ops, the struct_ops is held by the kernel subsystem (e.g. tcp-cc). Thus, there is no need to pin a struct_ops map or its progs in order to keep them around. 2) To iterate all struct_ops in a system, it iterates all maps in type BPF_MAP_TYPE_STRUCT_OPS. BPF_MAP_TYPE_STRUCT_OPS is the current usual filter. In the future, it may need to filter by other struct_ops specific properties. e.g. filter by tcp_congestion_ops or other kernel subsystem ops in the future. 3) struct_ops requires the running kernel having BTF info. That allows more flexibility in handling other kernel structs. e.g. it can always dump the latest bpf_map_info. 4) Also, "struct_ops" command is not intended to repeat all features already provided by "map" or "prog". For example, if there really is a need to pin the struct_ops map, the user can use the "map" cmd to do that. While the first attempt was to reuse parts from map/prog.c, it ended up not a lot to share. The only obvious item is the map_parse_fds() but that still requires modifications to accommodate struct_ops map specific filtering (for the immediate and the future needs). Together with the earlier mentioned differences, it is better to part away from map/prog.c. The initial set of subcmds are, register, unregister, show, and dump. For register, it registers all struct_ops maps that can be found in an obj file. Option can be added in the future to specify a particular struct_ops map. Also, the common bpf_tcp_cc is stateless (e.g. bpf_cubic.c and bpf_dctcp.c). The "reuse map" feature is not implemented in this patch and it can be considered later also. For other subcmds, please see the man doc for details. A sample output of dump: [root@arch-fb-vm1 bpf]# bpftool struct_ops dump name cubic [{ "bpf_map_info": { "type": 26, "id": 64, "key_size": 4, "value_size": 256, "max_entries": 1, "map_flags": 0, "name": "cubic", "ifindex": 0, "btf_vmlinux_value_type_id": 18452, "netns_dev": 0, "netns_ino": 0, "btf_id": 52, "btf_key_type_id": 0, "btf_value_type_id": 0 } },{ "bpf_struct_ops_tcp_congestion_ops": { "refcnt": { "refs": { "counter": 1 } }, "state": "BPF_STRUCT_OPS_STATE_INUSE", "data": { "list": { "next": 0, "prev": 0 }, "key": 0, "flags": 0, "init": "void (struct sock *) bictcp_init/prog_id:138", "release": "void (struct sock *) 0", "ssthresh": "u32 (struct sock *) bictcp_recalc_ssthresh/prog_id:141", "cong_avoid": "void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140", "set_state": "void (struct sock *, u8) bictcp_state/prog_id:142", "cwnd_event": "void (struct sock *, enum tcp_ca_event) bictcp_cwnd_event/prog_id:139", "in_ack_event": "void (struct sock *, u32) 0", "undo_cwnd": "u32 (struct sock *) tcp_reno_undo_cwnd/prog_id:144", "pkts_acked": "void (struct sock *, const struct ack_sample *) bictcp_acked/prog_id:143", "min_tso_segs": "u32 (struct sock *) 0", "sndbuf_expand": "u32 (struct sock *) 0", "cong_control": "void (struct sock *, const struct rate_sample *) 0", "get_info": "size_t (struct sock *, u32, int *, union tcp_cc_info *) 0", "name": "bpf_cubic", "owner": 0 } } } ] Signed-off-by: -
Martin KaFai Lau authored
The kernel struct_ops obj has kernel's func ptrs implemented by bpf_progs. The bpf prog_id is stored as the value of the func ptr for introspection purpose. In the latter patch, a struct_ops dump subcmd will be added to introspect these func ptrs. It is desired to print the actual bpf prog_name instead of only printing the prog_id. Since struct_ops is the only usecase storing prog_id in the func ptr, this patch adds a prog_id_as_func_ptr bool (default is false) to "struct btf_dumper" in order not to mis-interpret the ptr value for the other existing use-cases. While printing a func_ptr as a bpf prog_name, this patch also prefix the bpf prog_name with the ptr's func_proto. [ Note that it is the ptr's func_proto instead of the bpf prog's func_proto ] It reuses the current btf_dump_func() to obtain the ptr's func_proto string. Here is an example from the bpf_cubic.c: "void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140" Signed-off-by:
-
Martin KaFai Lau authored
A char[] is currently printed as an integer array. This patch will print it as a string when 1) The array element type is an one byte int 2) The array element type has a BTF_INT_CHAR encoding or the array element type's name is "char" 3) All characters is between (0x1f, 0x7f) and it is terminated by a null character. Signed-off-by:
-
Martin KaFai Lau authored
This patch prints the enum's name if there is one found in the array of btf_enum. The commit 9eea9849 ("bpf: fix BTF verification of enums") has details about an enum could have any power-of-2 size (up to 8 bytes). This patch also takes this chance to accommodate these non 4 byte enums. Signed-off-by:
-
- 19 Mar, 2020 1 commit
-
-
Fangrui Song authored
Simplify gen_btf logic to make it work with llvm-objcopy. The existing 'file format' and 'architecture' parsing logic is brittle and does not work with llvm-objcopy/llvm-objdump. 'file format' output of llvm-objdump>=11 will match GNU objdump, but 'architecture' (bfdarch) may not. .BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag because it is part of vmlinux image used for introspection. C code can reference the section via linker script defined __start_BTF and __stop_BTF. This fixes a small problem that previous .BTF had the SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data). Additionally, `objcopy -I binary` synthesized symbols _binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not used elsewhere) are replaced with more commonplace __start_BTF and __stop_BTF. Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns "empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?" We use a dd command to change the e_type field in the ELF header from ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting ET_EXEC as an input file is an extremely rare GNU ld feature that lld does not intend to support, because this is error-prone. The output section description .BTF in include/asm-generic/vmlinux.lds.h avoids potential subtle orphan section placement issues and suppresses --orphan-handling=warn warnings. Fixes: df786c9b ("bpf: Force .BTF section start to zero when dumping from vmlinux") Fixes: cb0cc635 ("powerpc: Include .BTF section") Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Fangrui Song <maskray@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
- 17 Mar, 2020 2 commits
-
-
Wenbo Zhang authored
Use PT_REGS_RC instead of PT_REGS_RET to get ret correctly. Fixes: df8ff353 ("libbpf: Merge selftests' bpf_trace_helpers.h into libbpf's bpf_tracing.h") Signed-off-by:
Wenbo Zhang <ethercflow@gmail.com> Signed-off-by:
-
Andrii Nakryiko authored
Some tests and sub-tests are setting "custom" thread/process affinity and don't reset it back. Instead of requiring each test to undo all this, ensure that thread affinity is restored by test_progs test runner itself. Signed-off-by:
-
