Merge ipmi fixes from Corey Minyard:
 "Some minor fixes I had queued up.  The last one came in recently
  (patch 4) and it and patch 2 are candidates for stable-kernel."

* emailed patches from Corey Minyard <cminyard@mvista.com>:
  ipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex
  ipmi: Improve error messages on failed irq enable
  drivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflow
  drivers: char: ipmi: Replaced kmalloc and strcpy with kstrdup

When a 32 bit version of ipmitool is used on a 64 bit kernel, the
ipmi_devintf code fails to correctly acquire ipmi_mutex.  This results in
incomplete data being retrieved in some cases, or other possible failures.
Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the interrupt enable message returns an error, the messages are
not entirely accurate nor helpful.  So improve them.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When calling memcpy, read_data and write_data need additional 2 bytes.

  write_data:
    for checking:  "if (size > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)"

  read_data:
    for checking:  "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)"
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replaced calls to kmalloc followed by strcpy with a sincle call to
kstrdup.  Patch found using coccinelle.
Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull workqueue fixes from Tejun Heo:
 "Three more workqueue regression fixes.

   - Fix unbalanced unlock in trylock failure path of manage_workers().
     This shouldn't happen often in the wild but is possible.

   - While making schedule_work() and friends inline, they become
     unavailable to !GPL modules.  Allow !GPL modules to access basic
     stuff - system_wq and queue_*work_on() - so that schedule_work()
     and friends can be used.

   - During boot, the unbound NUMA support code allocates a cpumask for
     each possible node using alloc_cpumask_var_node(), which ends up
     trying to allocate node-specific memory even for offline nodes
     triggering BUG in the memory alloc code.  Use NUMA_NO_NODE for
     offline nodes."

* 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: don't perform NUMA-aware allocations on offline nodes in wq_numa_init()
  workqueue: Make schedule_work() available again to non GPL modules
  workqueue: correct handling of the pool spin_lock

Pull RCU fixes from Paul McKenney:
 "A couple of fixes for RCU regressions:

   - A boneheaded boolean-logic bug that resulted in excessive delays on
     boot, hibernation and suspend that was reported by Borislav Petkov,
     Bjørn Mork, and Joerg Roedel.  The fix inserts a single "!".

   - A fix for a boot-time splat due to allocating from bootmem too late
     in boot, fix courtesy of Sasha Levin with additional help from
     Yinghai Lu."

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Don't allocate bootmem from rcu_init()
  rcu: Fix comparison sense in rcu_needs_cpu()

argv_split(empty_or_all_spaces) happily succeeds, it simply returns
argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to
check sub_info->path != NULL to avoid the crash.

This is the minimal fix, todo:

 - perhaps we should change argv_split() to return NULL or change the
   callers.

 - kill or justify ->path[0] check

 - narrow the scope of helper_lock()
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull target fixes from Nicholas Bellinger:
 "A handful of fixes + minor changes this time around, along with one
  important >= v3.9 regression fix for IBLOCK backends.  The highlights
  include:

   - Use FD_MAX_SECTORS in FILEIO for block_device as
     well as files (agrover)

   - Fix processing of out-of-order CmdSNs with
     iSBD driver (shlomo)

   - Close long-standing target_put_sess_cmd() vs.
     core_tmr_abort_task() race with the addition of
     kref_put_spinlock_irqsave() (joern + greg-kh)

   - Fix IBLOCK WCE=1 + DPOFUA=1 backend WRITE
     regression in >= v3.9 (nab + bootc)

  Note these four patches are CC'ed to stable.

  Also, there is still some work left to be done on the active I/O
  shutdown path in target_wait_for_sess_cmds() used by tcm_qla2xxx +
  ib_isert fabrics that is still being discussed on the list, and will
  hopefully be resolved soon."

* 'queue' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: close target_put_sess_cmd() vs. core_tmr_abort_task() race
  target: removed unused transport_state flag
  target/iblock: Fix WCE=1 + DPOFUA=1 backend WRITE regression
  MAINTAINERS: Update target git tree URL
  iscsi-target: Fix typos in RDMAEXTENSIONS macro usage
  target/rd: Add ramdisk bit for NULLIO operation
  iscsi-target: Fix processing of OOO commands
  iscsi-target: Make buf param of iscsit_do_crypto_hash_buf() const void *
  iscsi-target: Fix NULL pointer dereference in iscsit_send_reject
  target: Have dev/enable show if TCM device is configured
  target: Use FD_MAX_SECTORS/FD_BLOCKSIZE for blockdevs using fileio
  target: Remove unused struct members in se_dev_entry

wq_numa_init() builds per-node cpumasks which are later used to make
unbound workqueues NUMA-aware.  The cpumasks are allocated using
alloc_cpumask_var_node() for all possible nodes.  Unfortunately, on
machines with off-line nodes, this leads to NUMA-aware allocations on
existing bug offline nodes, which in turn triggers BUG in the memory
allocation code.

Fix it by using NUMA_NO_NODE for cpumask allocations for offline
nodes.

  kernel BUG at include/linux/gfp.h:323!
  invalid opcode: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0+ #1
  Hardware name: ProLiant BL465c G7, BIOS A19 12/10/2011
  task: ffff880234608000 ti: ffff880234602000 task.ti: ffff880234602000
  RIP: 0010:[<ffffffff8117495d>]  [<ffffffff8117495d>] new_slab+0x2ad/0x340
  RSP: 0000:ffff880234603bf8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff880237404b40 RCX: 00000000000000d0
  RDX: 0000000000000001 RSI: 0000000000000003 RDI: 00000000002052d0
  RBP: ffff880234603c28 R08: 0000000000000000 R09: 0000000000000001
  R10: 0000000000000001 R11: ffffffff812e3aa8 R12: 0000000000000001
  R13: ffff8802378161c0 R14: 0000000000030027 R15: 00000000000040d0
  FS:  0000000000000000(0000) GS:ffff880237800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: ffff88043fdff000 CR3: 00000000018d5000 CR4: 00000000000007f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Stack:
   ffff880234603c28 0000000000000001 00000000000000d0 ffff8802378161c0
   ffff880237404b40 ffff880237404b40 ffff880234603d28 ffffffff815edba1
   ffff880237816140 0000000000000000 ffff88023740e1c0
  Call Trace:
   [<ffffffff815edba1>] __slab_alloc+0x330/0x4f2
   [<ffffffff81174b25>] kmem_cache_alloc_node_trace+0xa5/0x200
   [<ffffffff812e3aa8>] alloc_cpumask_var_node+0x28/0x90
   [<ffffffff81a0bdb3>] wq_numa_init+0x10d/0x1be
   [<ffffffff81a0bec8>] init_workqueues+0x64/0x341
   [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
   [<ffffffff819f1f31>] kernel_init_freeable+0xb7/0x1ec
   [<ffffffff815d50de>] kernel_init+0xe/0xf0
   [<ffffffff815ff89c>] ret_from_fork+0x7c/0xb0
  Code: 45  84 ac 00 00 00 f0 41 80 4d 00 40 e9 f6 fe ff ff 66 0f 1f 84 00 00 00 00 00 e8 eb 4b ff ff 49 89 c5 e9 05 fe ff ff <0f> 0b 4c 8b 73 38 44 89 ff 81 cf 00 00 20 00 4c 89 f6 48 c1 ee
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-Tested-by: Lingzhu Xiang <lxiang@redhat.com>

Merge tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This includes a fix to a memory leak when adding filters to traces.

  Also, Masami Hiramatsu fixed up some minor bugs that were discovered
  by sparse."

* tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Make print_*probe_event static
  tracing/kprobes: Fix a sparse warning for incorrect type in assignment
  tracing/kprobes: Use rcu_dereference_raw for tp->files
  tracing: Fix leaks of filter preds

Pull x86 fixes from Thomas Gleixner:

 - Fix for a CPU hot-add deadlock in microcode update code

 - Fix for idle consolidation fallout

 - Documentation update for initial kernel direct mapping

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Add missing comments for initial kernel direct mapping
  x86/microcode: Add local mutex to fix physical CPU hot-add deadlock
  x86: Fix idle consolidation fallout

Pull perf fixes from Thomas Gleixner:

 - Fix for a task exit cleanup race caused by a missing a preempt
   disable

 - Cleanup of the event notification functions with a massive reduction
   of duplicated code

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Factor out auxiliary events notification
  perf: Fix EXIT event notification

Pull timer fixes from Thomas Gleixner:

 - Cure for not using zalloc in the first place, which leads to random
   crashes with CPUMASK_OFF_STACK.

 - Revert a user space visible change which broke udev

 - Add a missing cpu_online early return introduced by the new full
   dyntick conversions

 - Plug a long standing race in the timer wheel cpu hotplug code.
   Sigh...

 - Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu
   up.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons
  timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
  tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline
  tick: Cleanup NOHZ per cpu data on cpu down
  tick: Use zalloc_cpumask_var for allocating offstack cpumasks

Pull core fixes from Thomas Gleixner:

 - Two fixlets for the fallout of the generic idle task conversion

 - Documentation update

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit
  idle: Fix hlt/nohlt command-line handling in new generic idle
  kthread: Document ways of reducing OS jitter due to per-CPU kthreads

Pull ARM fixes from Russell King:
 "A small number of fixes for stuff from the last merge window, and in
  one case (IRQ time accounting) the previous merge window."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value
  ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge
  ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked
  ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile
  ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4
  ARM: finally enable IRQ time accounting config

Pull Ceph fixes from Sage Weil:
 "Yes, this is a much larger pull than I would like after -rc1.  There
  are a few things included:

   - a few fixes for leaks and incorrect assertions
   - a few patches fixing behavior when mapped images are resized
   - handling for cloned/layered images that are flattened out from
     underneath the client

  The last bit was non-trivial, and there is some code movement and
  associated cleanup mixed in.  This was ready and was meant to go in
  last week but I missed the boat on Friday.  My only excuse is that I
  was waiting for an all clear from the testing and there were many
  other shiny things to distract me.

  Strictly speaking, handling the flatten case isn't a regression and
  could wait, so if you like we can try to pull the series apart, but
  Alex and I would much prefer to have it all in as it is a case real
  users will hit with 3.10."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (33 commits)
  rbd: re-submit flattened write request (part 2)
  rbd: re-submit write request for flattened clone
  rbd: re-submit read request for flattened clone
  rbd: detect when clone image is flattened
  rbd: reference count parent requests
  rbd: define parent image request routines
  rbd: define rbd_dev_unparent()
  rbd: don't release write request until necessary
  rbd: get parent info on refresh
  rbd: ignore zero-overlap parent
  rbd: support reading parent page data for writes
  rbd: fix parent request size assumption
  libceph: init sent and completed when starting
  rbd: kill rbd_img_request_get()
  rbd: only set up watch for mapped images
  rbd: set mapping read-only flag in rbd_add()
  rbd: support reading parent page data
  rbd: fix an incorrect assertion condition
  rbd: define rbd_dev_v2_header_info()
  rbd: get rid of trivial v1 header wrappers
  ...

According to sparse warning, print_*probe_event static because
those functions are not directly called from outside.

Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Fix a sparse warning about the rcu operated pointer is
defined without __rcu address space.

Link: http://lkml.kernel.org/r/20130513115837.6545.23322.stgit@mhiramat-M0-7522

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Use rcu_dereference_raw() for accessing tp->files. Because the
write-side uses rcu_assign_pointer() for memory barrier,
the read-side also has to use rcu_dereference_raw() with
read memory barrier.

Link: http://lkml.kernel.org/r/20130513115834.6545.17022.stgit@mhiramat-M0-7522

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Special preds are created when folding a series of preds that
can be done in serial. These are allocated in an ops field of
the pred structure. But they were never freed, causing memory
leaks.

This was discovered using the kmemleak checker:

unreferenced object 0xffff8800797fd5e0 (size 32):
  comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s)
  hex dump (first 32 bytes):
    00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814b52af>] kmemleak_alloc+0x73/0x98
    [<ffffffff8111ff84>] kmemleak_alloc_recursive.constprop.42+0x16/0x18
    [<ffffffff81120e68>] __kmalloc+0xd7/0x125
    [<ffffffff810d47eb>] kcalloc.constprop.24+0x2d/0x2f
    [<ffffffff810d4896>] fold_pred_tree_cb+0xa9/0xf4
    [<ffffffff810d3781>] walk_pred_tree+0x47/0xcc
    [<ffffffff810d5030>] replace_preds.isra.20+0x6f8/0x72f
    [<ffffffff810d50b5>] create_filter+0x4e/0x8b
    [<ffffffff81b1c30d>] ftrace_test_event_filter+0x5a/0x155
    [<ffffffff8100028d>] do_one_initcall+0xa0/0x137
    [<ffffffff81afbedf>] kernel_init_freeable+0x14d/0x1dc
    [<ffffffff814b24b7>] kernel_init+0xe/0xdb
    [<ffffffff814d539c>] ret_from_fork+0x7c/0xb0
    [<ffffffffffffffff>] 0xffffffffffffffff

Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: stable@vger.kernel.org # 2.6.39+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When rcu_init() is called we already have slab working, allocating
bootmem at that point results in warnings and an allocation from
slab.  This commit therefore changes alloc_bootmem_cpumask_var() to
alloc_cpumask_var() in rcu_bootup_announce_oddness(), which is called
from rcu_init().
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Robin Holt <holt@sgi.com>

[paulmck: convert to zalloc_cpumask_var(), as suggested by Yinghai Lu.]

It is possible for one thread to to take se_sess->sess_cmd_lock in
core_tmr_abort_task() before taking a reference count on
se_cmd->cmd_kref, while another thread in target_put_sess_cmd() drops
se_cmd->cmd_kref before taking se_sess->sess_cmd_lock.

This introduces kref_put_spinlock_irqsave() and uses it in
target_put_sess_cmd() to close the race window.
Signed-off-by: Joern Engel <joern@logfs.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a regression bug introduced in v3.9-rc1 where if the
underlying struct block_device for a IBLOCK backend is configured with
WCE=1 + DPOFUA=1 settings, the rw = WRITE assignment no longer occurs
in iblock_execute_rw(), and rw = 0 is passed to iblock_submit_bios()
in effect causing a READ bio operation to occur.

The offending commit is:

commit d0c8b259
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Tue Jan 29 22:10:06 2013 -0800

    target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status

Note the WCE=1 + DPOFUA=0, WCE=0 + DPOFUA=1, and WCE=0 + DPOFUA=0 cases
are not affected by this regression bug.
Reported-by: Chris Boot <bootc@bootc.net>
Tested-by: Chris Boot <bootc@bootc.net>
Reported-by: Hannes Reinecke <hare@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config,
which enables some minor compile time optimization to avoid
uncessary code in mostly the suspend/resume path could cause
problems for userland.

In particular, the dependency for RTC_HCTOSYS on
!ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time
twice and simplifies suspend/resume, has the side effect
of causing the /sys/class/rtc/rtcN/hctosys flag to always be
zero, and this flag is commonly used by udev to setup the
/dev/rtc symlink to /dev/rtcN, which can cause pain for
older applications.

While the udev rules could use some work to be less fragile,
breaking userland should strongly be avoided. Additionally
the compile time optimizations are fairly minor, and the code
being optimized is likely to be reworked in the future, so
lets revert this change.
Reported-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: stable <stable@vger.kernel.org> #3.9
Cc: Feng Tang <feng.tang@intel.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Commit 8425e3d5 ("workqueue: inline trivial wrappers") changed
schedule_work() and schedule_delayed_work() to inline wrappers,
but these rely on some symbols that are EXPORT_SYMBOL_GPL, while
the original functions were EXPORT_SYMBOL.  This has the effect of
changing the licensing requirement for these functions and making
them unavailable to non GPL modules.

Make them available again by removing the restriction on the
required symbols.
Signed-off-by: Marc Dionne <marc.dionne@your-file-system.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

When we fail to mutex_trylock(), we release the pool spin_lock and do
mutex_lock(). After that, we should regrab the pool spin_lock, but,
regrabbing is missed in current code. So correct it.

Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Commit c0f4dfd4 (rcu: Make RCU_FAST_NO_HZ take advantage of numbered
callbacks) introduced a bug that can result in excessively long grace
periods.  This bug reverse the senes of the "if" statement checking
for lazy callbacks, so that RCU takes a lazy approach when there are
in fact non-lazy callbacks.  This can result in excessive boot, suspend,
and resume times.

This commit therefore fixes the sense of this "if" statement.
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Bjørn Mork <bjorn@mork.no>
Tested-by: Joerg Roedel <joro@8bytes.org>

Pull ext4 update from Ted Ts'o:
 "Fixed regressions (two stability regressions and a performance
  regression) introduced during the 3.10-rc1 merge window.

  Also included is a bug fix relating to allocating blocks after
  resizing an ext3 file system when using the ext4 file system driver"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
  ext4: revert "ext4: use io_end for multiple bios"
  ext4: limit group search loop for non-extent files
  ext4: fix fio regression

Pull workqueue fix from Tejun Heo:
 "A fix for a workqueue_congested() regression that broke fscache"

* 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: workqueue_congested() shouldn't translate WORK_CPU_UNBOUND into node number

An inactive timer's base can refer to a offline cpu's base.

In the current code, cpu_base's lock is blindly reinitialized each
time a CPU is brought up. If a CPU is brought online during the period
that another thread is trying to modify an inactive timer on that CPU
with holding its timer base lock, then the lock will be reinitialized
under its feet. This leads to following SPIN_BUG().

<0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466
<0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1
<4> [<c0013dc4>] (unwind_backtrace+0x0/0x11c) from [<c026e794>] (do_raw_spin_unlock+0x40/0xcc)
<4> [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) from [<c076c160>] (_raw_spin_unlock+0x8/0x30)
<4> [<c076c160>] (_raw_spin_unlock+0x8/0x30) from [<c009b858>] (mod_timer+0x294/0x310)
<4> [<c009b858>] (mod_timer+0x294/0x310) from [<c00a5e04>] (queue_delayed_work_on+0x104/0x120)
<4> [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) from [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c)
<4> [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) from [<c04d8780>] (sdhci_disable+0x40/0x48)
<4> [<c04d8780>] (sdhci_disable+0x40/0x48) from [<c04bf300>] (mmc_release_host+0x4c/0xb0)
<4> [<c04bf300>] (mmc_release_host+0x4c/0xb0) from [<c04c7aac>] (mmc_sd_detect+0x90/0xfc)
<4> [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) from [<c04c2504>] (mmc_rescan+0x7c/0x2c4)
<4> [<c04c2504>] (mmc_rescan+0x7c/0x2c4) from [<c00a6a7c>] (process_one_work+0x27c/0x484)
<4> [<c00a6a7c>] (process_one_work+0x27c/0x484) from [<c00a6e94>] (worker_thread+0x210/0x3b0)
<4> [<c00a6e94>] (worker_thread+0x210/0x3b0) from [<c00aad9c>] (kthread+0x80/0x8c)
<4> [<c00aad9c>] (kthread+0x80/0x8c) from [<c000ea80>] (kernel_thread_exit+0x0/0x8)

As an example, this particular crash occurred when CPU #3 is executing
mod_timer() on an inactive timer whose base is refered to offlined CPU
#2.  The code locked the timer_base corresponding to CPU #2. Before it
could proceed, CPU #2 came online and reinitialized the spinlock
corresponding to its base. Thus now CPU #3 held a lock which was
reinitialized. When CPU #3 finally ended up unlocking the old cpu_base
corresponding to CPU #2, we hit the above SPIN_BUG().

CPU #0		CPU #3				       CPU #2
------		-------				       -------
.....		 ......				      <Offline>
		mod_timer()
		 lock_timer_base
		   spin_lock_irqsave(&base->lock)

cpu_up(2)	 .....				        ......
							init_timers_cpu()
....		 .....				    	spin_lock_init(&base->lock)
.....		   spin_unlock_irqrestore(&base->lock)  ......
		   <spin_bug>

Allocation of per_cpu timer vector bases is done only once under
"tvec_base_done[]" check. In the current code, spinlock_initialization
of base->lock isn't under this check. When a CPU is up each time the
base lock is reinitialized. Move base spinlock initialization under
the check.
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1368520142-4136-1-git-send-email-tirupath@codeaurora.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Bjørn Mork reported the following warning when running powertop.

[   49.289034] ------------[ cut here ]------------
[   49.289055] WARNING: at kernel/rcutree.c:502 rcu_eqs_exit_common.isra.48+0x3d/0x125()
[   49.289244] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-bisect-rcu-warn+ #107
[   49.289251]  ffffffff8157d8c8 ffffffff81801e28 ffffffff8137e4e3 ffffffff81801e68
[   49.289260]  ffffffff8103094f ffffffff81801e68 0000000000000000 ffff88023afcd9b0
[   49.289268]  0000000000000000 0140000000000000 ffff88023bee7700 ffffffff81801e78
[   49.289276] Call Trace:
[   49.289285]  [<ffffffff8137e4e3>] dump_stack+0x19/0x1b
[   49.289293]  [<ffffffff8103094f>] warn_slowpath_common+0x62/0x7b
[   49.289300]  [<ffffffff8103097d>] warn_slowpath_null+0x15/0x17
[   49.289306]  [<ffffffff810a9006>] rcu_eqs_exit_common.isra.48+0x3d/0x125
[   49.289314]  [<ffffffff81079b49>] ? trace_hardirqs_off_caller+0x37/0xa6
[   49.289320]  [<ffffffff810a9692>] rcu_idle_exit+0x85/0xa8
[   49.289327]  [<ffffffff8107076e>] trace_cpu_idle_rcuidle+0xae/0xff
[   49.289334]  [<ffffffff810708b1>] cpu_startup_entry+0x72/0x115
[   49.289341]  [<ffffffff813689e5>] rest_init+0x149/0x150
[   49.289347]  [<ffffffff8136889c>] ? csum_partial_copy_generic+0x16c/0x16c
[   49.289355]  [<ffffffff81a82d34>] start_kernel+0x3f0/0x3fd
[   49.289362]  [<ffffffff81a8274c>] ? repair_env_string+0x5a/0x5a
[   49.289368]  [<ffffffff81a82481>] x86_64_start_reservations+0x2a/0x2c
[   49.289375]  [<ffffffff81a82550>] x86_64_start_kernel+0xcd/0xd1
[   49.289379] ---[ end trace 07a1cc95e29e9036 ]---

The warning is that 'rdtp->dynticks' has an unexpected value, which roughly
translates to - the calls to rcu_idle_enter() and rcu_idle_exit() were not
made in the correct order, or otherwise messed up.

And Bjørn's painstaking debugging indicated that this happens when the idle
loop enters the poll mode. Looking at the poll function cpu_idle_poll(), and
the implementation of trace_cpu_idle_rcuidle(), the problem becomes very clear:
cpu_idle_poll() lacks calls to rcu_idle_enter/exit(), and trace_cpu_idle_rcuidle()
calls them in the reverse order - first rcu_idle_exit(), and then rcu_idle_enter().
Hence the even/odd alternative sequencing of rdtp->dynticks goes for a toss.

And powertop readily triggers this because powertop uses the idle-tracing
infrastructure extensively.

So, to fix this, wrap the code in cpu_idle_poll() within rcu_idle_enter/exit(),
so that it blends properly with the calls inside trace_cpu_idle_rcuidle() and
thus get the function ordering right.
Reported-and-tested-by: Bjørn Mork <bjorn@mork.no>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/519169BF.4080208@linux.vnet.ibm.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

commit 5b39939a (nohz: Move ts->idle_calls incrementation into strict
idle logic) moved code out of tick_nohz_stop_sched_tick() and missed
to bail out when the cpu is offline. That's causing subsequent
failures as an offline CPU is supposed to die and not to fiddle with
nohz magic.

Return false in can_stop_idle_tick() if the cpu is offline.
Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz>
Reported-and-tested-by: Prarit Bhargava <prarit@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305132138160.2863@ionosSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull powerpc fixes from Benjamin Herrenschmidt:
 "This is mostly bug fixes (some of them regressions, some of them I
  deemed worth merging now) along with some patches from Li Zhong
  hooking up the new context tracking stuff (for the new full NO_HZ)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
  powerpc: Set show_unhandled_signals to 1 by default
  powerpc/perf: Fix setting of "to" addresses for BHRB
  powerpc/pmu: Fix order of interpreting BHRB target entries
  powerpc/perf: Move BHRB code into CONFIG_PPC64 region
  powerpc: select HAVE_CONTEXT_TRACKING for pSeries
  powerpc: Use the new schedule_user API on userspace preemption
  powerpc: Exit user context on notify resume
  powerpc: Exception hooks for context tracking subsystem
  powerpc: Syscall hooks for context tracking subsystem
  powerpc/booke64: Fix kernel hangs at kernel_dbg_exc
  powerpc: Fix irq_set_affinity() return values
  powerpc: Provide __bswapdi2
  powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3
  powerpc/powernv: Detect OPAL v3 API version
  powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again
  powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS
  powerpc: Bring all threads online prior to migration/hibernation
  powerpc/rtas_flash: Fix validate_flash buffer overflow issue
  powerpc/kexec: Fix kexec when using VMX optimised memcpy
  powerpc: Fix build errors STRICT_MM_TYPECHECKS
  ...

Just like other architectures
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Currently we only set the "to" address in the branch stack when the CPU
explicitly gives us a value.  Unfortunately it only does this for XL form
branches (eg blr, bctr, bctar) and not I and B form branches (eg b, bc).

Fortunately if we read the instruction from memory we can extract the offset of
a branch and calculate the target address.

This adds a function power_pmu_bhrb_to() to calculate the target/to address of
the corresponding I and B form branches.  It handles branches in both user and
kernel spaces.  It also plumbs this into the perf brhb reading code.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The current Branch History Rolling Buffer (BHRB) code misinterprets the order
of entries in the hardware buffer.  It assumes that a branch target address
will be read _after_ its corresponding branch.  In reality the branch target
comes before (lower mfbhrb entry) it's corresponding branch.

This is a rewrite of the code to take this into account.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The new Branch History Rolling buffer (BHRB) code is only useful on 64bit
processors, so move it into the #ifdef CONFIG_PPC64 region.

This avoids code bloat on 32bit systems.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Start context tracking support from pSeries.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>