We're starting to be more strict about transaction locked state, and
multiple transactions in a task.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We're about to add new asserts for btree_trans locking consistency, and
part of that requires that aren't using the btree_trans while it's
unlocked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In the key cache fill path, we use path_upgrade() on a path that isn't
uptodate yet but should be locked.

This change makes bch2_btree_path_upgrade() slightly looser so we can
use it in key cache upgrade, instead of the __ version.

Also, make the related assert - that path->uptodate implies nodes_locked
- slightly clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Commit ec9cc18f ("bcachefs: Add checks for invalid snapshot IDs")
intends to check the sanity of a snapshot and panic when
BCACHEFS_DEBUG is set, but that conditional has a typo.

Fix the typo to refer to the actual existing Kconfig symbol.

This was found with ./scripts/checkkconfigsymbols.py.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Since commit 43a7206b ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the bch_chardev_class structure to be declared at build
time placing it into read-only memory, instead of having to be dynamically
allocated at boot time. Also, correctly clean up after failing paths in
bch2_chardev_init().

Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Some renaming for better consistency

bch2_member_exists	-> bch2_member_alive
bch2_dev_exists		-> bch2_member_exists
bch2_dev_exsits2	-> bch2_dev_exists
bch_dev_locked		-> bch2_dev_locked
bch_dev_bkey_exists	-> bch2_dev_bkey_exists

new helper - bch2_dev_safe
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

cut out a branch from doing it the obvious way
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Factor out slowpath into a separate helper
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a new helper that calls dir_emit() and updates ctx->pos on success;
this lets us convert bch2_readdir() to drop_locks_do().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Combine iter/update/trigger/str_hash flags into a single enum, and
x-macroize them for a to_text() function later.

These flags are all for a specific iter/key/update context, so it makes
sense to group them together - iter/update/trigger flags were already
given distinct bits, this cleans up and unifies that handling.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Consolidate mark_superblock() and trans_mark_superblock(), like we did
with the other trigger paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

with errors_silent, reconstruct_alloc no longer requires fsck and
fix_errors to work
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Dead code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This optimization reduces the average number of comparisons required
from 2*n*log2(n) - 3*n + o(n) to n*log2(n) + 0.37*n + o(n). When n is
sufficiently large, it results in approximately 50% fewer comparisons.

Currently, eytzinger0_sort employs the textbook version of heapsort,
where during the heapify process, each level requires two comparisons
to determine the maximum among three elements. In contrast, the
bottom-up heapsort, during heapify, only compares two children at each
level until reaching a leaf node. Then, it backtracks from the leaf
node to find the correct position. Since heapify typically continues
until very close to the leaf node, the standard heapify requires about
2*log2(n) comparisons, while the bottom-up variant only needs log2(n)
comparisons.

The experimental data presented below is based on an array generated
by get_random_u32().

|   N   | comparisons(old) | comparisons(new) | time(old) | time(new) |
|-------|------------------|------------------|-----------|-----------|
| 10000 |     235381       |     136615       |  25545 us |  20366 us |
| 20000 |     510694       |     293425       |  31336 us |  18312 us |
| 30000 |     800384       |     457412       |  35042 us |  27386 us |
| 40000 |    1101617       |     626831       |  48779 us |  38253 us |
| 50000 |    1409762       |     799637       |  62238 us |  46950 us |
| 60000 |    1721191       |     974521       |  75588 us |  58367 us |
| 70000 |    2038536       |    1152171       |  90823 us |  68778 us |
| 80000 |    2362958       |    1333472       | 104165 us |  78625 us |
| 90000 |    2690900       |    1516065       | 116111 us |  89573 us |
| 100000|    3019413       |    1699879       | 133638 us | 100998 us |

Refs:
  BOTTOM-UP-HEAPSORT, a new variant of HEAPSORT beating, on an average,
  QUICKSORT (if n is not very small)
  Ingo Wegener
  Theoretical Computer Science, 118(1); Pages 81-98, 13 September 1993
  https://doi.org/10.1016/0304-3975(93)90364-YSigned-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

reading the journal can take a decent amount of time compared to the
rest of fsck, let's only read it when required.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Be more explicit to the user about what we're doing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Long form version of bch2_btree_path_to_text() - useful in error
messages and tracepoints.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

small cleanup
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

debug helper
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

better btree node read path error messages
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

- fix assorted (harmless) off-by-one errors
- we were inconsistent on whether out->pos stays <= out->size on
  overflow; now it does, and printbuf.overflow exists to indicate if a
  printbuf has overflowed
- factor out printbuf_advance_pos()
- printbuf_nul_terminate_reserved(); use this to reduce the number of
  printbuf_make_room() calls
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We need to be able to test these paths in dry run mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>