- 31 Jan, 2008 40 commits
-
-
Matthew Ranostay authored
Fixed issue that the incorrect GPIO line was being pulled high for some STAC9205 based laptops. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Fixed the bug that multiple capture streams conflict on Realtek codec routines. Also, this adds a framework to enable the alternative playback stream, e.g. for VoIP. It's not fully implemented yet, though. Signed-off-by:
-
Matthew Ranostay authored
Allows for dynamically creating mono out mixer controls and well as mono mux controls. Signed-off-by:
-
Matthew Ranostay authored
Added a mono_out_pin field to autocfg struct, and code to parse for the mono_out_line. Signed-off-by:
-
Clemens Ladisch authored
None of the reference design models have MIDI, only the X-Meridian allows to connect a MIDI adapter. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Clemens Ladisch authored
Fix up SPDIF input sample rates again: 32 kHz and 64 kHz are not supported. Signed-off-by:
-
Randy Dunlap authored
snd_opti93x_mixer() is only called by __devinit snd_opti93x_probe(), so the former can also be __devinit. snd_miro_mixer() is only called by __devinit snd_miro_probe(), so the former can also be __devinit. sound/isa/opti9xx/opti92x-ad1848.c: WARNING: vmlinux.o(.text+0xf91cd7): Section mismatch: reference to .init.data:snd_opti93x_controls (between 'snd_opti93x_mixer' and 'snd_card_opti9xx_free') WARNING: vmlinux.o(.text+0xf91d66): Section mismatch: reference to .init.data:snd_miro_controls (between 'snd_opti93x_mixer' and 'snd_card_opti9xx_free') opti9xx/miro.c: WARNING: vmlinux.o(.text+0xf926c2): Section mismatch: reference to .init.data:snd_miro_controls (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf926e5): Section mismatch: reference to .init.data:snd_miro_eq_controls (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf926f9): Section mismatch: reference to .init.data:snd_miro_line_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf92716): Section mismatch: reference to .init.data:snd_miro_amp_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf9273e): Section mismatch: reference to .init.data:snd_miro_preamp_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf92764): Section mismatch: reference to .init.data:snd_miro_capture_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf92783): Section mismatch: reference to .init.data:snd_miro_radio_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf9279a): Section mismatch: reference to .init.data:snd_miro_eq_controls (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') WARNING: vmlinux.o(.text+0xf927b9): Section mismatch: reference to .init.data:snd_miro_radio_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport') Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
snd_cs5535audio_mixer() is only called by __devinit snd_cs5535audio_probe(), so the mixer function can also be __devinit. WARNING: vmlinux.o(.text+0xfdbba0): Section mismatch: reference to .init.data:ac97_quirks (between 'snd_cs5535audio_mixer' and 'process_bm0_irq') Signed-off-by:
-
Mark Brown authored
Update the ASoC documentation. Along with minor formatting and grammar cleanups it moves the ASoC overview into the present tense to reflect the fact that it has now been merged. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Takashi Iwai authored
Don't query a widget parameter for an invalid NID in get_wcaps() but rather returns zero (i.e. no attribute). The read to an non-existing widget may result in a fatal codec communication error. Signed-off-by:
-
Takashi Iwai authored
Don't read the widget list again as we already have it at the beginning. Signed-off-by:
-
Marc Boucher authored
Added afg and mfg preset masks for more finer codec-preset selection. Signed-off-by:
Marc Boucher <marc@linuxant.com> Signed-off-by:
-
Marc Boucher authored
Signed-off-by:
-
Marc Boucher authored
Added a delay after the power state change as a partial workaround for 'hda_intel: azx_get_response timeout' problem on Cxt codecs. Signed-off-by:
-
Marc Boucher authored
The input volume/switch elements are missing in Cxt5047 test model. Also the patch includes some code clean ups. Signed-off-by:
-
Marc Boucher authored
Change laptop models to three different models, laptop-hpsense, laptop-micsense and laptop-hpmicsense. The first two correspond to the old 'laptop' and 'fujitsu' models. Reassigned the quirk table for the new models. Signed-off-by:
-
Matthew Ranostay authored
Add support for the mono mux on several 92HD7xxx codecs. Creates a dynamic mixer for the mux selection. Signed-off-by:
-
Clemens Ladisch authored
Add a mixer control for the SPDIF loopback function. Signed-off-by:
-
Mark Brown authored
Don't take the codec mutex during machine probe until we have registered with ALSA, fixing a lockdep warning reported by Dmitry Baryshkov. Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by:
-
Clemens Ladisch authored
The TempoTec HiFier has a somwhat different architecture; remove it from the list of cards that are known to be supported. Signed-off-by:
-
Takashi Iwai authored
The available sample rates on CS5535 depend on AC97 codec chip. Set the additional hw params limit. Signed-off-by:
-
Clemens Ladisch authored
Add one more indirection to the lookup of the snd_pcm_hardware structures so that we can save the space of the duplicate ones. Signed-off-by:
-
Clemens Ladisch authored
Change the oxygen_spdif_input_bits_changed() function so that clock changes on the SPDIF input are correctly detected. This means that sample rates greater than 96 kHz are now supported. Signed-off-by:
-
Clemens Ladisch authored
Fix some wrong values for the definitions of the source masks for DACS 1 and 3. Signed-off-by:
-
Clemens Ladisch authored
Actually use the template that was maybe changed by the control filter instead of the original one. Signed-off-by:
-
Clemens Ladisch authored
Instead of having model-specific fields in the common struct oxygen, put them into a private structure that is allocated together with the card structure. Signed-off-by:
-
Clemens Ladisch authored
According to the datasheets, the SPI clock cycle must be at least 200 ns for the AK4396 and the WM8785, so we cannot use the default 160 ns. Signed-off-by:
-
Clemens Ladisch authored
Allow to record with 32 kHz, 64 kHz, 88.2 kHz and 176.4 kHz with cards that have a WM8785 ADC. Signed-off-by:
-
Clemens Ladisch authored
Add symbol definitions for the various codecs and GPIO pins. Signed-off-by:
-
Clemens Ladisch authored
The MIDI bit in the MISC register is set by default and cannot be used to detect the presence of a MIDI port. Instead, add a parameter to the oxygen_pci_probe() function so that model drivers can specify this. Signed-off-by:
-
Clemens Ladisch authored
Use the DMA_PAUSE register for pausing instead of stopping DMA. Signed-off-by:
-
Clemens Ladisch authored
Replace some magic numbers with register symbols. Signed-off-by:
-
Clemens Ladisch authored
Add documentation entries for snd-oxygen and snd-virtuoso. Signed-off-by:
-
Takashi Iwai authored
Reported by Al Viro: In copy_tlv(), the size of kmalloc is wrongly calculated. Signed-off-by:
-
Takashi Iwai authored
In azx_[rirb_]get_response(), the timeout is checked at the end of the loop. It's better to be checked just after the check of the RIRB index to avoid a bogus error with a too long msleep(). Signed-off-by:
-
Takashi Iwai authored
Clean up ice1712/ice1724 codes. The board-specific data is allocated locally in each code instead of having an ungly union in struct ice1712. Also, fix coding issues in prodigy_hifi.c. Signed-off-by:
-
Andrew Paprocki authored
This patch adds additional output to the /proc codec#X info. The following pieces of information are added to the output: - Balanced, L/R swap, trigger, impedance sense pin capabilities - Vref pin capabilities - Current Vref pin widget control setting - Default configuration association, sequence, and misc bit test - EAPD/BTL bits conveying balanced mode, EAPD, and L/R swap - Power state modified to show state name as well as setting vs actual value - GPIO parameter output on Audio Function Group, including enumeration of IO pins which are indicated present (Any I and O pins are not output at this time) - Stripe and L/R swap widget capabilities - All digital converter bits: enable, validity, validity config, preemphasis, copyright, non-audio, professional, generation level, and content category - Converter stream and channel values for in/out widgets - SDI select value for in widgets - Unsolicited response widget capability tag and enabled bit - Delay widget capability value - Processing widget capability benign bit and number of coefficients - Realtek Define Registers: processing coefficient, coefficient index [Also, fixed space/tab issues and make codes a bit more readable -- Takashi] Signed-off-by:
Andrew Paprocki <andrew@ishiboo.com> Signed-off-by:
-
Clemens Ladisch authored
The default playback routing must be 0xe4, not 0xe1; the front and surround DACs were exchanged. Signed-off-by:
-
Clemens Ladisch authored
Add more symbols for registers and register fields. Signed-off-by:
-
Timur Tabi authored
Enable mmap support in the MPC8610 ASoC driver. The driver can use ALSA's default mmap functionality, it was just not enabled previously. Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
