- 22 Sep, 2014 19 commits
-
-
Kalesh AP authored
This patch inserts a blank line after function/struct/union/enum definitions as per checkpatch warnings. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
This patch removes multiple blank lines in the driver as per checkpatch warnings. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
This patch fixes checkpatch warnings in be2net by adding a blank line between declaration and code blocks. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
This patch adds speed reporting via ethtool for 20G KR2 interface on the Skyhawk-R chip. Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
This patch adds speed reporting via ethtool for 40Gbps KR4 interface on the Skyhawk-R chip. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Suresh Reddy authored
This patch fixes a sprase warnings regarding endian declarations introduced by the following commit: fixes: e36edd9d ("be2net: add ethtool "-m" option support") Signed-off-by:
Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
This patch fixes a sparse warning about missing static declaration that was introduced by the following commit: fixes: 93676703 ("be2net: send a max of 8 EQs to be_cmd_modify_eqd() on Lancer") Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Commit ce93718f ("net: Don't keep around original SKB when we software segment GSO frames") frees the original skb after software GSO even for dodgy gso skbs. This breaks the stream throughput from untrusted sources, since only header checking was done during software GSO instead of a true segmentation. This patch fixes this by freeing the original gso skb only when it was really segmented by software. Fixes ce93718f ("net: Don't keep around original SKB when we software segment GSO frames.") Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nimrod Andy authored
There have extra identation before .skb_copy_to_linear_data_offset(), this patch just remove the identation. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== dsa: Broadcom SF2 suspend/resume and WoL This patch add supports for suspend/resume and configuring Wake-on-LAN for Broadcom Starfighter 2 switches. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In order for Wake-on-LAN to work properly, we query the parent network device Wake-on-LAN features and advertise those. Similarly, when configuring Wake-on-LAN on a per-port network interface, we make sure that we do not accept something the master network devices does not support. Finally, we need to maintain a bitmask of the ports enabled for Wake-on-LAN to prevent the suspend() callback from disabling a port that is used for waking up the system. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Allow switch drivers to implement per-port Wake-on-LAN getter and setters. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Implement the suspend/resume callbacks for the Broadcom Starfighter 2 switch driver. Suspending the switch requires masking interrupts and shutting down ports. Resuming the switch requires a software reset since we do not know which power-sate we might be coming from, and re-enabling the physical ports that are used. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Add an abstraction layer to suspend/resume switch devices, doing the following split: - suspend/resume the slave network devices and their corresponding PHY devices - suspend/resume the switch hardware using switch driver callbacks Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Harish Patil says: ==================== qlge: Fix compilation warning and update maintainers This patch series includes the following set of patches: - Fix the below warning message: qlge_main.c:1754: warning: 'lbq_desc' may be used uninitialized in this function I have made changes according to your earlier feedback: "Please fix this differently. The problem is that the compiler can't see that you've done the !length check at the top of the function, so when it later sees the while (length > 0) loop, it doesn't know that this loop will always execute at least once. Just change that loop to a do { } while() loop and the compiler will be able to see everything." - Update qlge driver maintainers list ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Harish Patil authored
Signed-off-by:
Harish Patil <harish.patil@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Harish Patil authored
Fix the below warning message: qlge_main.c:1754: warning: 'lbq_desc' may be used uninitialized in this function Signed-off-by:
Harish Patil <harish.patil@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeff Kirsher authored
Resolves compile warning about use of a deprecated function call: drivers/net/ethernet/amd/nmclan_cs.c: In function ‘nmclan_config’: drivers/net/ethernet/amd/nmclan_cs.c:624:3: warning: ‘pcmcia_request_exclusive_irq’ is deprecated (declared at include/pcmcia/ds.h:213) [-Wdeprecated-declarations] ret = pcmcia_request_exclusive_irq(link, mace_interrupt); Updates pcmcia_request_exclusive_irq() to pcmcia_request_irq(). CC: Roger Pao <rpao@paonet.org> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 20 Sep, 2014 1 commit
-
-
Andy Zhou authored
Functions supplied in ip6_udp_tunnel.c are only needed when IPV6 is selected. When IPV6 is not selected, those functions are stubbed out in udp_tunnel.h. ================================================================== net/ipv6/ip6_udp_tunnel.c:15:5: error: redefinition of 'udp_sock_create6' int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg, In file included from net/ipv6/ip6_udp_tunnel.c:9:0: include/net/udp_tunnel.h:36:19: note: previous definition of 'udp_sock_create6' was here static inline int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg, ================================================================== Fixes: fd384412 udp_tunnel: Seperate ipv6 functions into its own file Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Andy Zhou <azhou@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 19 Sep, 2014 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-09-18 This series contains updates to ixgbe and ixgbevf. Ethan Zhao cleans up ixgbe and ixgbevf by removing bd_number from the adapter struct because it is not longer useful. Mark fixes ixgbe where if a hardware transmit timestamp is requested, an uninitialized workqueue entry may be scheduled. Added a check for a PTP clock to avoid that. Jacob provides a number of cleanups for ixgbe. Since we may call ixgbe_acquire_msix_vectors() prior to registering our netdevice, we should not use the netdevice specific printk and use e_dev_warn() instead. Similar to how ixgbevf handles acquiring MSI-X vectors, we can return an error code instead of relying on the flag being set. This makes it more clear that we have failed to setup MSI-X mode and will make it easier to consolidate MSI-X related code into a single function. In the case of disabling DCB, it is not an error since we still can function, we just have to let the user know. So use e_dev_warn() instead of e_err(). Added warnings for other features that are disabled when we are without MSI-X support. Cleanup flags that are no longer used or needed. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Or Gerlitz says: ==================== mlx4: CQE/EQE stride support This series from Ido Shamay is intended for archs having cache line larger then 64 bytes. Since our CQE/EQEs are generally 64B in those systems, HW will write twice to the same cache line consecutively, causing pipe locks due to he hazard prevention mechanism. For elements in a cyclic buffer, writes are consecutive, so entries smaller than a cache line should be avoided, especially if they are written at a high rate. Reduce consecutive writes to same cache line in CQs/EQs, by allowing the driver to increase the distance between entries so that each will reside in a different cache line. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Shamay authored
This function derives the base address of the CQE from the CQE size, and calculates the real CQE context segment in it from the factor (this is like before). Before this change the code used the factor to calculate the base address of the CQE as well. The factor indicates in which segment of the cqe stride the cqe information is located. For 32-byte strides, the segment is 0, and for 64 byte strides, the segment is 1 (bytes 32..63). Using the factor was ok as long as we had only 32 and 64 byte strides. However, with larger strides, the factor is zero, and so cannot be used to calculate the base of the CQE. The helper uses the same method of CQE buffer pulling made by all other components that reads the CQE buffer (mlx4_ib driver and libmlx4). Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Shamay authored
Enable mlx4 interrupt handler to work with EQE stride feature, The feature may be enabled when cache line is bigger than 64B. The EQE size will then be the cache line size, and the context segment resides in [0-31] offset. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Shamay authored
This feature is intended for archs having cache line larger then 64B. Since our CQE/EQEs are generally 64B in those systems, HW will write twice to the same cache line consecutively, causing pipe locks due to he hazard prevention mechanism. For elements in a cyclic buffer, writes are consecutive, so entries smaller than a cache line should be avoided, especially if they are written at a high rate. Reduce consecutive writes to same cache line in CQs/EQs, by allowing the driver to increase the distance between entries so that each will reside in a different cache line. Until the introduction of this feature, there were two types of CQE/EQE: 1. 32B stride and context in the [0-31] segment 2. 64B stride and context in the [32-63] segment This feature introduces two additional types: 3. 128B stride and context in the [0-31] segment (128B cache line) 4. 256B stride and context in the [0-31] segment (256B cache line) Modify the mlx4_core driver to query the device for the CQE/EQE cache line stride capability and to enable that capability when the host cache line size is larger than 64 bytes (supported cache lines are 128B and 256B). The mlx4 IB driver and libmlx4 need not be aware of this change. The PF context behaviour is changed to require this change in VF drivers running on such archs. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
ptr used to be a non __percpu pointer (result of a this_cpu_ptr assignment, 7d720c3e ("percpu: add __percpu sparse annotations to net")). Since d25398df ("net: avoid reloads in SNMP_UPD_PO_STATS"), that's no longer the case, SNMP_UPD_PO_STATS uses this_cpu_add and ptr is now __percpu. Silence sparse warnings by preserving the original type and annotation, and remove the out-of-date comment. warning: incorrect type in initializer (different address spaces) expected unsigned long long *ptr got unsigned long long [noderef] <asn:3>*<noident> warning: incorrect type in initializer (different address spaces) expected void const [noderef] <asn:3>*__vpp_verify got unsigned long long *<noident> warning: incorrect type in initializer (different address spaces) expected void const [noderef] <asn:3>*__vpp_verify got unsigned long long *<noident> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Herbert says: ==================== net: foo-over-udp (fou) This patch series implements foo-over-udp. The idea is that we can encapsulate different IP protocols in UDP packets. The rationale for this is that networking devices such as NICs and switches are usually implemented with UDP (and TCP) specific mechanims for processing. For instance, many switches and routers will implement a 5-tuple hash for UDP packets to perform Equal Cost Multipath Routing (ECMP) or RSS (on NICs). Many NICs also only provide rudimentary checksum offload (basic TCP and UDP packet), with foo-over-udp we may be able to leverage these NICs to offload checksums of tunneled packets (using checksum unnecessary conversion and eventually remote checksum offload) An example encapsulation of IPIP over FOU is diagrammed below. As illustrated, the packet overhead for FOU is the 8 byte UDP header. +------------------+ | IPv4 hdr | +------------------+ | UDP hdr | +------------------+ | IPv4 hdr | +------------------+ | TCP hdr | +------------------+ | TCP payload | +------------------+ Conceptually, FOU should be able to encapsulate any IP protocol. The FOU header (UDP hdr.) is essentially an inserted header between the IP header and transport, so in the case of TCP or UDP encapsulation the pseudo header would be based on the outer IP header and its length field must not include the UDP header. * Receive In this patch set the RX path for FOU is implemented in a new fou module. To enable FOU for a particular protocol, a UDP-FOU socket is opened to the port to receive FOU packets. The socket is mapped to the IP protocol for the packets. The XFRM mechanism used to receive encapsulated packets (udp_encap_rcv) for the port. Upon reception, the UDP is removed and packet is reinjected in the stack for the corresponding protocol associated with the socket (return -protocol from udp_encap_rcv function). GRO is provided with the appropriate fou_gro_receive and fou_gro_complete. These routines need to know the encapsulation protocol so we save that in udp_offloads structure with the port and pass it in the napi_gro_cb structure. * TX This patch series implements FOU transmit encapsulation for IPIP, GRE, and SIT. This done by some common infrastructure in ip_tunnel including an ip_tunnel_encap to perform FOU encapsulation and common configuration to enable FOU on IP tunnels. FOU is configured on existing tunnels and does not create any new interfaces. The transmit and receive paths are independent, so use of FOU may be assymetric between tunnel endpoints. * Configuration The fou module using netlink to configure FOU receive ports. The ip command can be augmented with a fou subcommand to support this. e.g. to configure FOU for IPIP on port 5555: ip fou add port 5555 ipproto 4 GRE, IPIP, and SIT have been modified with netlink commands to configure use of FOU on transmit. The "ip link" command will be augmented with an encap subcommand (for supporting various forms of secondary encapsulation). For instance, to configure an ipip tunnel with FOU on port 5555: ip link add name tun1 type ipip \ remote 192.168.1.1 local 192.168.1.2 ttl 225 \ encap fou encap-sport auto encap-dport 5555 * Notes - This patch set does not implement GSO for FOU. The UDP encapsulation code assumes TEB, so that will need to be reimplemented. - When a packet is received through FOU, the UDP header is not actually removed for the skbuf, pointers to transport header and length in the IP header are updated (like in ESP/UDP RX). A side effect is the IP header will now appear to have an incorrect checksum by an external observer (e.g. tcpdump), it will be off by sizeof UDP header. If necessary we could adjust the checksum to compensate. - Performance results are below. My expectation is that FOU should entail little overhead (clearly there is some work to do :-) ). Optimizing UDP socket lookup for encapsulation ports should help significantly. - I really don't expect/want devices to have special support for any of this. Generic checksum offload mechanisms (NETIF_HW_CSUM and use of CHECKSUM_COMPLETE) should be sufficient. RSS and flow steering is provided by commonly implemented UDP hashing. GRO/GSO seem fairly comparable with LRO/TSO already. * Performance Ran netperf TCP_RR and TCP_STREAM tests across various configurations. This was performed on bnx2x and I disabled TSO/GSO on sender to get fair comparison for FOU versus non-FOU. CPU utilization is reported for receive in TCP_STREAM. GRE IPv4, FOU, UDP checksum enabled TCP_STREAM 24.85% CPU utilization 9310.6 Mbps TCP_RR 94.2% CPU utilization 155/249/460 90/95/99% latencies 1.17018e+06 tps IPv4, FOU, UDP checksum disabled TCP_STREAM 31.04% CPU utilization 9302.22 Mbps TCP_RR 94.13% CPU utilization 154/239/419 90/95/99% latencies 1.17555e+06 tps IPv4, no FOU TCP_STREAM 23.13% CPU utilization 9354.58 Mbps TCP_RR 90.24% CPU utilization 156/228/360 90/95/99% latencies 1.18169e+06 tps IPIP FOU, UDP checksum enabled TCP_STREAM 24.13% CPU utilization 9328 Mbps TCP_RR 94.23 149/237/429 90/95/99% latencies 1.19553e+06 tps FOU, UDP checksum disabled TCP_STREAM 29.13% CPU utilization 9370.25 Mbps TCP_RR 94.13% CPU utilization 149/232/398 90/95/99% latencies 1.19225e+06 tps No FOU TCP_STREAM 10.43% CPU utilization 5302.03 Mbps TCP_RR 51.53% CPU utilization 215/324/475 90/95/99% latencies 864998 tps SIT FOU, UDP checksum enabled TCP_STREAM 30.38% CPU utilization 9176.76 Mbps TCP_RR 96.9% CPU utilization 170/281/581 90/95/99% latencies 1.03372e+06 tps FOU, UDP checksum disabled TCP_STREAM 39.6% CPU utilization 9176.57 Mbps TCP_RR 97.14% CPU utilization 167/272/548 90/95/99% latencies 1.03203e+06 tps No FOU TCP_STREAM 11.2% CPU utilization 4636.05 Mbps TCP_RR 59.51% CPU utilization 232/346/489 90/95/99% latencies 813199 tps v2: - Removed encap IP tunnel ioctls, configuration is done by netlink only. - Don't export fou_create and fou_destroy, they are currently intended to be called within fou module only. - Filled on tunnel netlink structures and functions for new values. v3: - Fixed change logs for some of the patches. - Remove inline from fou_gro_receive and fou_gro_complete, let compiler decide on these. v4: - Don't need to cast void in fou_from_sock - Removed incorrest htons for port in fou_destroy - Some minor cleanup for readability ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Added netlink attrs to configure FOU encapsulation for GRE, netlink handling of these flags, and properly adjust MTU for encapsulation. ip_tunnel_encap is called from ip_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Add netlink handling for IP tunnel encapsulation parameters and and adjustment of MTU for encapsulation. ip_tunnel_encap is called from ip_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
This patch changes IP tunnel to support (secondary) encapsulation, Foo-over-UDP. Changes include: 1) Adding tun_hlen as the tunnel header length, encap_hlen as the encapsulation header length, and hlen becomes the grand total of these. 2) Added common netlink define to support FOU encapsulation. 3) Routines to perform FOU encapsulation. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Implement fou_gro_receive and fou_gro_complete, and populate these in the correponsing udp_offloads for the socket. Added ipproto to udp_offloads and pass this from UDP to the fou GRO routine in proto field of napi_gro_cb structure. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
This patch provides a receive path for foo-over-udp. This allows direct encapsulation of IP protocols over UDP. The bound destination port is used to map to an IP protocol, and the XFRM framework (udp_encap_rcv) is used to receive encapsulated packets. Upon reception, the encapsulation header is logically removed (pointer to transport header is advanced) and the packet is reinjected into the receive path with the IP protocol indicated by the mapping. Netlink is used to configure FOU ports. The configuration information includes the port number to bind to and the IP protocol corresponding to that port. This should support GRE/UDP (http://tools.ietf.org/html/draft-yong-tsvwg-gre-in-udp-encap-02), as will as the other IP tunneling protocols (IPIP, SIT). Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Want to be able to use these in foo-over-udp offloads, etc. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Fastabend authored
tc_u32_sel 'sel' in tc_u_knode expects to be the last element in the structure and pads the structure with tc_u32_key fields for each key. kzalloc(sizeof(*n) + s->nkeys*sizeof(struct tc_u32_key), GFP_KERNEL) CC: Eric Dumazet <edumazet@google.com> Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
pfifo_fast and htb use skb lists, without needing their spinlocks. (They instead use the standard qdisc lock) We can use __skb_queue_head_init() instead of skb_queue_head_init() to be consistent. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x: Support new Multi-function modes This patch series adds support for 2 new Multi-function modes - Unified Fabric Port [UFP] as well as nic partitioning 1.5 [NPAR1.5]. With the addition of the new multi-function modes, the series also revises some of the storage-related multi-function macros. [Do notice this series has several small issues with checkpatch] ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
When using new Multi-function modes it's possible that due to incompatible configuration management FW will fallback into an existing mode. Notice that at the moment this fallback is exactly the same as the already existing switch-independent multi-function mode, but we still use existing infrastructure to hold this information [in case some small differences will arise in the future]. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Add support for a new multi-function mode based on the Unified Fabric Port system specifications. Support includes configuration of: 1. Outer vlan tags. 2. Bandwidth settings. 3. Virtual link enable/disable. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Kravkov authored
Rearrange macros to query for storage-only modes in different MF environment. Improves the readibility and maintainability of the code. E.g.: - if (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp)) + if (IS_MF_STORAGE_ONLY(bp)) In addition, this removes the need for bnx2x_is_valid_ether_addr(). Signed-off-by:
Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-