- 26 Jul, 2024 13 commits
-
-
Paolo Bonzini authored
Use a guard to simplify early returns, and add two more easy shortcuts. If the requested attributes are invalid, the attributes xarray will never show them as set. And if testing a single page, kvm_get_memory_attributes() is more efficient. Reviewed-by:
Michael Roth <michael.roth@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Do not allow populating the same page twice with startup data. In the case of SEV-SNP, for example, the firmware does not allow it anyway, since the launch-update operation is only possible on pages that are still shared in the RMP. Even if it worked, kvm_gmem_populate()'s callback is meant to have side effects such as updating launch measurements, and updating the same page twice is unlikely to have the desired results. Races between calls to the ioctl are not possible because kvm_gmem_populate() holds slots_lock and the VM should not be running. But again, even if this worked on other confidential computing technology, it doesn't matter to guest_memfd.c whether this is something fishy such as missing synchronization in userspace, or rather something intentional. One of the racers wins, and the page is initialized by either kvm_gmem_prepare_folio() or kvm_gmem_populate(). Anyway, out of paranoia, adjust sev_gmem_post_populate() anyway to use the same errno that kvm_gmem_populate() is using. Reviewed-by:
-
Paolo Bonzini authored
It is enough to return 0 if a guest need not do any preparation. This is in fact how sev_gmem_prepare() works for non-SNP guests, and it extends naturally to Intel hosts: the x86 callback for gmem_prepare is optional and returns 0 if not defined. Reviewed-by:
-
Paolo Bonzini authored
This is now possible because preparation is done by kvm_gmem_get_pfn() instead of fallocate(). In practice this is not a limitation, because even though guest_memfd can be bound to multiple struct kvm, for hardware implementations of confidential computing only one guest (identified by an ASID on SEV-SNP, or an HKID on TDX) will be able to access it. In the case of intra-host migration (not implemented yet for SEV-SNP, but we can use SEV-ES as an idea of how it will work), the new struct kvm inherits the same ASID and preparation need not be repeated. Reviewed-by:
-
Paolo Bonzini authored
Initializing the contents of the folio on fallocate() is unnecessarily restrictive. It means that the page is registered with the firmware and then it cannot be touched anymore. In particular, this loses the possibility of using fallocate() to pre-allocate the page for SEV-SNP guests, because kvm_arch_gmem_prepare() then fails. It's only when the guest actually accesses the page (and therefore kvm_gmem_get_pfn() is called) that the page must be cleared from any stale host data and registered with the firmware. The up-to-date flag is clear if this has to be done (i.e. it is the first access and kvm_gmem_populate() has not been called). All in all, there are enough differences between kvm_gmem_get_pfn() and kvm_gmem_populate(), that it's better to separate the two flows completely. Extract the bulk of kvm_gmem_get_folio(), which take a folio and end up setting its up-to-date flag, to a new function kvm_gmem_prepare_folio(); these are now done only by the non-__-prefixed kvm_gmem_get_pfn(). As a bonus, __kvm_gmem_get_pfn() loses its ugly "bool prepare" argument. One difference is that fallocate(PUNCH_HOLE) can now race with a page fault. Potentially this causes a page to be prepared and into the filemap even after fallocate(PUNCH_HOLE). This is harmless, as it can be fixed by another hole punching operation, and can be avoided by clearing the private-page attribute prior to invoking fallocate(PUNCH_HOLE). This way, the page fault will cause an exit to user space. The previous semantics, where fallocate() could be used to prepare the pages in advance of running the guest, can be accessed with KVM_PRE_FAULT_MEMORY. For now, accessing a page in one VM will attempt to call kvm_arch_gmem_prepare() in all of those that have bound the guest_memfd. Cleaning this up is left to a separate patch. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Paolo Bonzini authored
Allow testing the up-to-date flag in the caller without taking the lock again. Reviewed-by:
-
Paolo Bonzini authored
Add "ARCH" to the symbols; shortly, the "prepare" phase will include both the arch-independent step to clear out contents left in the page by the host, and the arch-dependent step enabled by CONFIG_HAVE_KVM_GMEM_PREPARE. For consistency do the same for CONFIG_HAVE_KVM_GMEM_INVALIDATE as well. Reviewed-by:
-
Paolo Bonzini authored
We have a perfectly usable folio, use it to retrieve the pfn and order. All that's needed is a version of folio_file_page that returns a pfn. Reviewed-by:
-
Paolo Bonzini authored
The up-to-date flag as is now is not too useful; it tells guest_memfd not to overwrite the contents of a folio, but it doesn't say that the page is ready to be mapped into the guest. For encrypted guests, mapping a private page requires that the "preparation" phase has succeeded, and at the same time the same page cannot be prepared twice. So, ensure that folio_mark_uptodate() is only called on a prepared page. If kvm_gmem_prepare_folio() or the post_populate callback fail, the folio will not be marked up-to-date; it's not a problem to call clear_highpage() again on such a page prior to the next preparation attempt. Reviewed-by:
-
Paolo Bonzini authored
Right now this is simply more consistent and avoids use of pfn_to_page() and put_page(). It will be put to more use in upcoming patches, to ensure that the up-to-date flag is set at the very end of both the kvm_gmem_get_pfn() and kvm_gmem_populate() flows. Reviewed-by:
-
Paolo Bonzini authored
KVM_PRE_FAULT_MEMORY for an SNP guest can race with sev_gmem_post_populate() in bad ways. The following sequence for instance can potentially trigger an RMP fault: thread A, sev_gmem_post_populate: called thread B, sev_gmem_prepare: places below 'pfn' in a private state in RMP thread A, sev_gmem_post_populate: *vaddr = kmap_local_pfn(pfn + i); thread A, sev_gmem_post_populate: copy_from_user(vaddr, src + i * PAGE_SIZE, PAGE_SIZE); RMP #PF Fix this by only allowing KVM_PRE_FAULT_MEMORY to run after a guest's initial private memory contents have been finalized via KVM_SEV_SNP_LAUNCH_FINISH. Beyond fixing this issue, it just sort of makes sense to enforce this, since the KVM_PRE_FAULT_MEMORY documentation states: "KVM maps memory as if the vCPU generated a stage-2 read page fault" which sort of implies we should be acting on the same guest state that a vCPU would see post-launch after the initial guest memory is all set up. Co-developed-by:
-
Chang Yu authored
Fix "WARNING: Title underline too short" by extending title line to the proper length. Signed-off-by:
Chang Yu <marcus.yu.56@gmail.com> Message-ID: <ZqB3lofbzMQh5Q-5@gmail.com> Signed-off-by:
-
Jim Mattson authored
SAP's vSMP MemoryONE continuously requests a local APIC timer period less than 500 us, resulting in the following kernel log spam: kvm: vcpu 15: requested 70240 ns lapic timer period limited to 500000 ns kvm: vcpu 19: requested 52848 ns lapic timer period limited to 500000 ns kvm: vcpu 15: requested 70256 ns lapic timer period limited to 500000 ns kvm: vcpu 9: requested 70256 ns lapic timer period limited to 500000 ns kvm: vcpu 9: requested 70208 ns lapic timer period limited to 500000 ns kvm: vcpu 9: requested 387520 ns lapic timer period limited to 500000 ns kvm: vcpu 9: requested 70160 ns lapic timer period limited to 500000 ns kvm: vcpu 66: requested 205744 ns lapic timer period limited to 500000 ns kvm: vcpu 9: requested 70224 ns lapic timer period limited to 500000 ns kvm: vcpu 9: requested 70256 ns lapic timer period limited to 500000 ns limit_periodic_timer_frequency: 7569 callbacks suppressed ... To eliminate this spam, change the pr_info_ratelimited() in limit_periodic_timer_frequency() to pr_info_once(). Reported-by:
James Houghton <jthoughton@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Message-ID: <20240724190640.2449291-1-jmattson@google.com> Signed-off-by:
-
- 17 Jul, 2024 1 commit
-
-
Michael Roth authored
When requesting an attestation report a guest is able to specify whether it wants SNP firmware to sign the report using either a Versioned Chip Endorsement Key (VCEK), which is derived from chip-unique secrets, or a Versioned Loaded Endorsement Key (VLEK) which is obtained from an AMD Key Derivation Service (KDS) and derived from seeds allocated to enrolled cloud service providers (CSPs). For VLEK keys, an SNP_VLEK_LOAD SNP firmware command is used to load them into the system after obtaining them from the KDS. Add a corresponding userspace interface so to allow the loading of VLEK keys into the system. See SEV-SNP Firmware ABI 1.54, SNP_VLEK_LOAD for more details. Reviewed-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
- 16 Jul, 2024 20 commits
-
-
Wei Wang authored
Similar to kvm_x86_call(), kvm_pmu_call() is added to streamline the usage of static calls of kvm_pmu_ops, which improves code readability. Suggested-by:
Wei Wang <wei.w.wang@intel.com> Link: https://lore.kernel.org/r/20240507133103.15052-4-wei.w.wang@intel.comSigned-off-by:
-
Wei Wang authored
Introduces kvm_x86_call(), to streamline the usage of static calls of kvm_x86_ops. The current implementation of these calls is verbose and could lead to alignment challenges. This makes the code susceptible to exceeding the "80 columns per single line of code" limit as defined in the coding-style document. Another issue with the existing implementation is that the addition of kvm_x86_ prefix to hooks at the static_call sites hinders code readability and navigation. kvm_x86_call() is added to improve code readability and maintainability, while adhering to the coding style guidelines. Signed-off-by:
-
Wei Wang authored
The use of static_call_cond() is essentially the same as static_call() on x86 (e.g. static_call() now handles a NULL pointer as a NOP), so replace it with static_call() to simplify the code. Link: https://lore.kernel.org/all/3916caa1dcd114301a49beafa5030eca396745c1.1679456900.git.jpoimboe@kernel.org/Suggested-by:
-
Paolo Bonzini authored
The GHCB 2.0 specification defines 2 GHCB request types to allow SNP guests to send encrypted messages/requests to firmware: SNP Guest Requests and SNP Extended Guest Requests. These encrypted messages are used for things like servicing attestation requests issued by the guest. Implementing support for these is required to be fully GHCB-compliant. For the most part, KVM only needs to handle forwarding these requests to firmware (to be issued via the SNP_GUEST_REQUEST firmware command defined in the SEV-SNP Firmware ABI), and then forwarding the encrypted response to the guest. However, in the case of SNP Extended Guest Requests, the host is also able to provide the certificate data corresponding to the endorsement key used by firmware to sign attestation report requests. This certificate data is provided by userspace because: 1) It allows for different keys/key types to be used for each particular guest with requiring any sort of KVM API to configure the certificate table in advance on a per-guest basis. 2) It provides additional flexibility with how attestation requests might be handled during live migration where the certificate data for source/dest might be different. 3) It allows all synchronization between certificates and firmware/signing key updates to be handled purely by userspace rather than requiring some in-kernel mechanism to facilitate it. [1] To support fetching certificate data from userspace, a new KVM exit type will be needed to handle fetching the certificate from userspace. An attempt to define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle this was introduced in v1 of this patchset, but is still being discussed by community, so for now this patchset only implements a stub version of SNP Extended Guest Requests that does not provide certificate data, but is still enough to provide compliance with the GHCB 2.0 spec. -
Michael Roth authored
Version 2 of GHCB specification added support for the SNP Extended Guest Request Message NAE event. This event serves a nearly identical purpose to the previously-added SNP_GUEST_REQUEST event, but for certain message types it allows the guest to supply a buffer to be used for additional information in some cases. Currently the GHCB spec only defines extended handling of this sort in the case of attestation requests, where the additional buffer is used to supply a table of certificate data corresponding to the attestion report's signing key. Support for this extended handling will require additional KVM APIs to handle coordinating with userspace. Whether or not the hypervisor opts to provide this certificate data is optional. However, support for processing SNP_EXTENDED_GUEST_REQUEST GHCB requests is required by the GHCB 2.0 specification for SNP guests, so for now implement a stub implementation that provides an empty certificate table to the guest if it supplies an additional buffer, but otherwise behaves identically to SNP_GUEST_REQUEST. Reviewed-by:
Carlos Bilbao <carlos.bilbao.osdev@gmail.com> Reviewed-by:
Liam Merwick <liam.merwick@oracle.com> Signed-off-by:
-
Michael Roth authored
sev_guest.h currently contains various definitions relating to the format of SNP_GUEST_REQUEST commands to SNP firmware. Currently only the sev-guest driver makes use of them, but when the KVM side of this is implemented there's a need to parse the SNP_GUEST_REQUEST header to determine whether additional information needs to be provided to the guest. Prepare for this by moving those definitions to a common header that's shared by host/guest code so that KVM can also make use of them. Reviewed-by:
-
Brijesh Singh authored
Version 2 of GHCB specification added support for the SNP Guest Request Message NAE event. The event allows for an SEV-SNP guest to make requests to the SEV-SNP firmware through the hypervisor using the SNP_GUEST_REQUEST API defined in the SEV-SNP firmware specification. This is used by guests primarily to request attestation reports from firmware. There are other request types are available as well, but the specifics of what guest requests are being made generally does not affect how they are handled by the hypervisor, which only serves as a proxy for the guest requests and firmware responses. Implement handling for these events. When an SNP Guest Request is issued, the guest will provide its own request/response pages, which could in theory be passed along directly to firmware. However, these pages would need special care: - Both pages are from shared guest memory, so they need to be protected from migration/etc. occurring while firmware reads/writes to them. At a minimum, this requires elevating the ref counts and potentially needing an explicit pinning of the memory. This places additional restrictions on what type of memory backends userspace can use for shared guest memory since there would be some reliance on using refcounted pages. - The response page needs to be switched to Firmware-owned state before the firmware can write to it, which can lead to potential host RMP #PFs if the guest is misbehaved and hands the host a guest page that KVM is writing to for other reasons (e.g. virtio buffers). Both of these issues can be avoided completely by using separately-allocated bounce pages for both the request/response pages and passing those to firmware instead. So that's the approach taken here. Signed-off-by:Brijesh Singh <brijesh.singh@amd.com> Co-developed-by:
Alexey Kardashevskiy <aik@amd.com> Signed-off-by:
Ashish Kalra <ashish.kalra@amd.com> Signed-off-by:
-
Sean Christopherson authored
Explicitly suppress userspace emulated MMIO exits that are triggered when emulating a task switch as KVM doesn't support userspace MMIO during complex (multi-step) emulation. Silently ignoring the exit request can result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace for some other reason prior to purging mmio_needed. See commit 0dc90226 ("KVM: x86: Suppress pending MMIO write exits if emulator detects exception") for more details on KVM's limitations with respect to emulated MMIO during complex emulator flows. Reported-by: syzbot+2fb9f8ed752c01bc9a3f@syzkaller.appspotmail.com Signed-off-by:
-
Sean Christopherson authored
Tweak the definition of make_huge_page_split_spte() to eliminate an unnecessarily long line, and opportunistically initialize child_spte to make it more obvious that the child is directly derived from the huge parent. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Bug the VM instead of simply warning if KVM tries to split a SPTE that is non-present or not-huge. KVM is guaranteed to end up in a broken state as the callers fully expect a valid SPTE, e.g. the shadow MMU will add an rmap entry, and all MMUs will account the expected small page. Returning '0' is also technically wrong now that SHADOW_NONPRESENT_VALUE exists, i.e. would cause KVM to create a potential #VE SPTE. While it would be possible to have the callers gracefully handle failure, doing so would provide no practical value as the scenario really should be impossible, while the error handling would add a non-trivial amount of noise. Fixes: a3fe5dbd ("KVM: x86/mmu: Split huge pages mapped by the TDP MMU when dirty logging is enabled") Cc: David Matlack <dmatlack@google.com> Signed-off-by:
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM VMX changes for 6.11 - Remove an unnecessary EPT TLB flush when enabling hardware. - Fix a series of bugs that cause KVM to fail to detect nested pending posted interrupts as valid wake eents for a vCPU executing HLT in L2 (with HLT-exiting disable by L1). - Misc cleanups
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM SVM changes for 6.11 - Make per-CPU save_area allocations NUMA-aware. - Force sev_es_host_save_area() to be inlined to avoid calling into an instrumentable function from noinstr code.
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM selftests for 6.11 - Remove dead code in the memslot modification stress test. - Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs. - Print the guest pseudo-RNG seed only when it changes, to avoid spamming the log for tests that create lots of VMs. - Make the PMU counters test less flaky when counting LLC cache misses by doing CLFLUSH{OPT} in every loop iteration. -
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM x86/pmu changes for 6.11 - Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads '0' and writes from userspace are ignored. - Update to the newfangled Intel CPU FMS infrastructure. - Use macros instead of open-coded literals to clean up KVM's manipulation of FIXED_CTR_CTRL MSRs.
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM x86 MTRR virtualization removal Remove support for virtualizing MTRRs on Intel CPUs, along with a nasty CR0.CD hack, and instead always honor guest PAT on CPUs that support self-snoop.
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM x86 MMU changes for 6.11 - Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't hold leafs SPTEs. - Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager page splitting to avoid stalling vCPUs when splitting huge pages. - Misc cleanups
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM x86 misc changes for 6.11 - Add a global struct to consolidate tracking of host values, e.g. EFER, and move "shadow_phys_bits" into the structure as "maxphyaddr". - Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX. - Print the name of the APICv/AVIC inhibits in the relevant tracepoint. - Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor. - Misc cleanups
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM generic changes for 6.11 - Enable halt poll shrinking by default, as Intel found it to be a clear win. - Setup empty IRQ routing when creating a VM to avoid having to synchronize SRCU when creating a split IRQCHIP on x86. - Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag that arch code can use for hooking both sched_in() and sched_out(). - Take the vCPU @id as an "unsigned long" instead of "u32" to avoid truncating a bogus value from userspace, e.g. to help userspace detect bugs. - Mark a vCPU as preempted if and only if it's scheduled out while in the KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest memory when retrieving guest state during live migration blackout. - A few minor cleanups
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM Xen: Fix a bug where KVM fails to check the validity of an incoming userspace virtual address and tries to activate a gfn_to_pfn_cache with a kernel address.
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmPaolo Bonzini authored
KVM/arm64 changes for 6.11 - Initial infrastructure for shadow stage-2 MMUs, as part of nested virtualization enablement - Support for userspace changes to the guest CTR_EL0 value, enabling (in part) migration of VMs between heterogenous hardware - Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of the protocol - FPSIMD/SVE support for nested, including merged trap configuration and exception routing - New command-line parameter to control the WFx trap behavior under KVM - Introduce kCFI hardening in the EL2 hypervisor - Fixes + cleanups for handling presence/absence of FEAT_TCRX - Miscellaneous fixes + documentation updates
-
- 14 Jul, 2024 6 commits
-
-
Oliver Upton authored
* kvm-arm64/docs: : KVM Documentation fixes, courtesy of Changyuan Lyu : : Small set of typo fixes / corrections to the KVM API documentation : relating to MSIs and arm64 VGIC UAPI. MAINTAINERS: Include documentation in KVM/arm64 entry KVM: Documentation: Correct the VGIC V2 CPU interface addr space size KVM: Documentation: Enumerate allowed value macros of `irq_type` KVM: Documentation: Fix typo `BFD` Signed-off-by:Oliver Upton <oliver.upton@linux.dev>
-
Oliver Upton authored
* kvm-arm64/nv-tcr2: : Fixes to the handling of TCR_EL1, courtesy of Marc Zyngier : : Series addresses a couple gaps that are present in KVM (from cover : letter): : : - VM configuration: HCRX_EL2.TCR2En is forced to 1, and we blindly : save/restore stuff. : : - trap bit description and routing: none, obviously, since we make a : point in not trapping. KVM: arm64: Honor trap routing for TCR2_EL1 KVM: arm64: Make PIR{,E0}_EL1 save/restore conditional on FEAT_TCRX KVM: arm64: Make TCR2_EL1 save/restore dependent on the VM features KVM: arm64: Get rid of HCRX_GUEST_FLAGS KVM: arm64: Correctly honor the presence of FEAT_TCRX Signed-off-by: -
Oliver Upton authored
* kvm-arm64/nv-sve: : CPTR_EL2, FPSIMD/SVE support for nested : : This series brings support for honoring the guest hypervisor's CPTR_EL2 : trap configuration when running a nested guest, along with support for : FPSIMD/SVE usage at L1 and L2. KVM: arm64: Allow the use of SVE+NV KVM: arm64: nv: Add additional trap setup for CPTR_EL2 KVM: arm64: nv: Add trap description for CPTR_EL2 KVM: arm64: nv: Add TCPAC/TTA to CPTR->CPACR conversion helper KVM: arm64: nv: Honor guest hypervisor's FP/SVE traps in CPTR_EL2 KVM: arm64: nv: Load guest FP state for ZCR_EL2 trap KVM: arm64: nv: Handle CPACR_EL1 traps KVM: arm64: Spin off helper for programming CPTR traps KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state KVM: arm64: nv: Use guest hypervisor's max VL when running nested guest KVM: arm64: nv: Save guest's ZCR_EL2 when in hyp context KVM: arm64: nv: Load guest hyp's ZCR into EL1 state KVM: arm64: nv: Handle ZCR_EL2 traps KVM: arm64: nv: Forward SVE traps to guest hypervisor KVM: arm64: nv: Forward FP/ASIMD traps to guest hypervisor Signed-off-by: -
Oliver Upton authored
* kvm-arm64/el2-kcfi: : kCFI support in the EL2 hypervisor, courtesy of Pierre-Clément Tosi : : Enable the usage fo CONFIG_CFI_CLANG (kCFI) for hardening indirect : branches in the EL2 hypervisor. Unlike kernel support for the feature, : CFI failures at EL2 are always fatal. KVM: arm64: nVHE: Support CONFIG_CFI_CLANG at EL2 KVM: arm64: Introduce print_nvhe_hyp_panic helper arm64: Introduce esr_brk_comment, esr_is_cfi_brk KVM: arm64: VHE: Mark __hyp_call_panic __noreturn KVM: arm64: nVHE: gen-hyprel: Skip R_AARCH64_ABS32 KVM: arm64: nVHE: Simplify invalid_host_el2_vect KVM: arm64: Fix __pkvm_init_switch_pgd call ABI KVM: arm64: Fix clobbered ELR in sync abort/SError Signed-off-by: -
Oliver Upton authored
* kvm-arm64/ctr-el0: : Support for user changes to CTR_EL0, courtesy of Sebastian Ott : : Allow userspace to change the guest-visible value of CTR_EL0 for a VM, : so long as the requested value represents a subset of features supported : by hardware. In other words, prevent the VMM from over-promising the : capabilities of hardware. : : Make this happen by fitting CTR_EL0 into the existing infrastructure for : feature ID registers. KVM: selftests: Assert that MPIDR_EL1 is unchanged across vCPU reset KVM: arm64: nv: Unfudge ID_AA64PFR0_EL1 masking KVM: selftests: arm64: Test writes to CTR_EL0 KVM: arm64: rename functions for invariant sys regs KVM: arm64: show writable masks for feature registers KVM: arm64: Treat CTR_EL0 as a VM feature ID register KVM: arm64: unify code to prepare traps KVM: arm64: nv: Use accessors for modifying ID registers KVM: arm64: Add helper for writing ID regs KVM: arm64: Use read-only helper for reading VM ID registers KVM: arm64: Make idregs debugfs iterator search sysreg table directly KVM: arm64: Get sys_reg encoding from descriptor in idregs_debug_show() Signed-off-by: -
Oliver Upton authored
* kvm-arm64/shadow-mmu: : Shadow stage-2 MMU support for NV, courtesy of Marc Zyngier : : Initial implementation of shadow stage-2 page tables to support a guest : hypervisor. In the author's words: : : So here's the 10000m (approximately 30000ft for those of you stuck : with the wrong units) view of what this is doing: : : - for each {VMID,VTTBR,VTCR} tuple the guest uses, we use a : separate shadow s2_mmu context. This context has its own "real" : VMID and a set of page tables that are the combination of the : guest's S2 and the host S2, built dynamically one fault at a time. : : - these shadow S2 contexts are ephemeral, and behave exactly as : TLBs. For all intent and purposes, they *are* TLBs, and we discard : them pretty often. : : - TLB invalidation takes three possible paths: : : * either this is an EL2 S1 invalidation, and we directly emulate : it as early as possible : : * or this is an EL1 S1 invalidation, and we need to apply it to : the shadow S2s (plural!) that match the VMID set by the L1 guest : : * or finally, this is affecting S2, and we need to teardown the : corresponding part of the shadow S2s, which invalidates the TLBs KVM: arm64: nv: Truely enable nXS TLBI operations KVM: arm64: nv: Add handling of NXS-flavoured TLBI operations KVM: arm64: nv: Add handling of range-based TLBI operations KVM: arm64: nv: Add handling of outer-shareable TLBI operations KVM: arm64: nv: Invalidate TLBs based on shadow S2 TTL-like information KVM: arm64: nv: Tag shadow S2 entries with guest's leaf S2 level KVM: arm64: nv: Handle FEAT_TTL hinted TLB operations KVM: arm64: nv: Handle TLBI IPAS2E1{,IS} operations KVM: arm64: nv: Handle TLBI ALLE1{,IS} operations KVM: arm64: nv: Handle TLBI VMALLS12E1{,IS} operations KVM: arm64: nv: Handle TLB invalidation targeting L2 stage-1 KVM: arm64: nv: Handle EL2 Stage-1 TLB invalidation KVM: arm64: nv: Add Stage-1 EL2 invalidation primitives KVM: arm64: nv: Unmap/flush shadow stage 2 page tables KVM: arm64: nv: Handle shadow stage 2 page faults KVM: arm64: nv: Implement nested Stage-2 page table walk logic KVM: arm64: nv: Support multiple nested Stage-2 mmu structures Signed-off-by:
-
