- 24 Feb, 2020 40 commits
-
-
Jiri Pirko authored
Add a test to check functionality of ACL traps. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Currently the helpers assume pref 1 and handle 101. Make that explicit and pass the values from callers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Include test of forbidding to have drop rule on mixed-bound shared block. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Add the trap group used to report ACL drops. Setup the trap IDs for ingress/egress flow action drop. Register the two packet traps associated with ACL trap group with devlink during driver initialization. As these are "source traps", set the disabled trap group to be the dummy, discarding as many packets in HW as possible. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
For "source traps" it is not possible to change HPKT action to discard. But there is still need to disallow packets arriving to CPU as much as possible. Handle this by introduction of a "dummy group". It has a "thin" policer, which passes as less packets to CPU as possible. The rest is going to be discarded there. The "dummy group" is to be used later on by ACL trap (which is a "source trap"). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Extend the mlxsw_listener struct to contain trap group for disabled traps too. Rename the original "trap_group" item to "en_trap_group" as it represents enabled state. Let both groups be the same for MLXSW_RXL however extend MLXSW_RXL_DIS to register separate groups for enable and disable. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
For source traps, the "thin policer" is going to be used in order to reduce the amount of trapped packets to minimum. However, there will be still small number of packets coming in that need to be dropped in the driver. Allow to enable/disable rx_listener related to specific trap in order to prevent unwanted packets to go up the stack. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce a new set of traps: DISCARD_INGRESS_ACL and DISCARD_EGRESS_ACL Set the trap_action from NOP to TRAP which causes the packets dropped by the TRAP action to be trapped under new trap IDs, depending on the ingress/egress binding point. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The ACL flex action will have to know if it is in ingress or egress, so it can use correct trap ID. Pass the ingress indication down to it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Action drop is going to be tracked by two separate traps, one for ingress and one for egress. Prepare for it and disallow the possibility to have drop action in blocks which are bound to both ingress and egress. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Count the number of ingress and egress block bindings. Use the egress counter in "is_egress_bound" helper. Add couple of helpers to check ingress and mixed bound. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Add packet traps that can report packets that were dropped during ACL processing. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Rename function mlxsw_core_trap_action_set() to mlxsw_core_trap_state_set() and pass bool enabled instead of action. Figure out the action according to the enabled state there. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The listener fields en_action and dis_action now contain the actions to be used for TRAP and DROP devlink trap actions. Use them directly instead of the hard-coded values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce a new macro MLXSW_RXL_DIS that allows to register listeners as disabled. That allows that from now on, the "action" can be understood always as "enabled action" and "unreg_action" as "disabled action". Rename them and treat them accordingly. Use the new macro for defining drops in spectrum_trap.c. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Currently it does not really matter if it is set to DISCARD or SET_FW_DEFAULT because it is set only during unregister of the listener. The unreg_action is going to be used for disabling the listener too, so change to SET_FW_DEFAULT and ensure the HW is going to behave correctly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Leon Romanovsky says: ==================== Clean driver, module and FW versions Change log: v1: * Split all FW cleanups patches to separate patches * Fixed commit message * Deleted odd DRV_RELDATE * Added everyone from MAINTAINERS file v0: https://lore.kernel.org/netdev/20200220145855.255704-1-leon@kernel.org This is first patchset to netdev (already sent RDMA [1] and arch/um [2]) in attempt to unify the version management for in-tree kernel code. The patches follow already accepted ethtool change [3] to set as a default linux kernel version. It allows us to remove driver version and present to the users unified picture of driver version, which is similar to default MODULE_VERSION(). As part of this series, I deleted various creative attempts to mark absence of FW. There is no need to set "N/A" in ethtool ->fw_version field and it is enough to do not set it. 1. The code is compile tested and passes 0-day kbuild. 2. The proposed changes are based on commit: 2bb07f4e ("tc-testing: updated tdc tests for basic filter") 3. WIP branch is [4]. [1] https://lore.kernel.org/linux-rdma/20200220071239.231800-1-leon@kernel.org/ [2] http://lists.infradead.org/pipermail/linux-um/2020-February/002913.html [3] https://lore.kernel.org/linux-rdma/20200127072028.19123-1-leon@kernel.org/ [4] https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git/log/?h=ethtool ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
Use linux kernel version for ethtool and module versions. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Chris Snook <chris.snook@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
Drop constant driver version in favour of global linux kernel. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
There is no need to keep module and driver versions in in-tree kernel code. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
There is no need to set "N/A" if FW is not available. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
Delete module version in favor of global and unique linux kernel. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
Convert AMD drivers to respect universal linux kernel version. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
Upstream drivers are managed inside global repository and released all together, this ensure that driver version is the same as linux kernel, so update amazon drivers to properly reflect it. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
Convert to use default version provided by ethtool. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
The acenic driver assigns FW version in driver version field, as part of cleanup driver version, set FW version properly. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
There is no need in custom driver version for in-tree code. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
Use standard variant of the driver version. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
There is no need in driver version for in-tree kernel code. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
If FW version is not available, it is enough to leave that field as empty, there is no need to write N/A. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
If FW version is not available, it is enough to leave that field as empty, there is no need to write N/A. The driver version is replaced in favor of generally available in-tree variant. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
Delete useless driver version in favor of default ones. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
There is no need to mislead users by providing different versions for driver, ethtool and modules. Delete driver assignments and let use the default one. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
Delete constant driver and module versions in favor of standard global version which is unique to whole kernel. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
The in-kernel code has already unique version, which is based on Linus's tag, update the bond driver to be consistent with that version. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The pointer 'client' is being initialized with a value that is never read, it is being updated later on. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
There is a spelling mistake in a literal string. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
generic_xdp_tx and xdp_do_generic_redirect are only used by builtin code, so remove the EXPORT_SYMBOL_GPL for them. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
After commit 2690048c ("net: igmp: Allow user-space configuration of igmp unsolicited report interval"), they are not used now Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-