- 14 Mar, 2018 18 commits
-
-
Christian König authored
Just set the GTT domain as mandatory, so that the BO is validated into it on first use. This allows us to setup the sg table later on. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Roger He <Hongbo.He@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Instead of moving this to the SYSTEM domain just drop the backing store and let the resulting allocation be freed. Signed-off-by:
-
Christian König authored
Better to set this with all other fields as well. Signed-off-by:
-
Christian König authored
Instead of calculating the size in bytes just to recalculate the number of pages from it pass the BO directly to the function. Signed-off-by:
-
Christian König authored
Allows us to gut a BO of it's backing store when the driver says that it isn't needed any more. Signed-off-by:
-
Monk Liu authored
this patch actually refactor mailbox implmentations, and all below changes are needed together to fix all those mailbox handshake issues exposured by heavey TDR test. 1)refactor all mailbox functions based on byte accessing for mb_control reason is to avoid touching non-related bits when writing trn/rcv part of mailbox_control, this way some incorrect INTR sent to hypervisor side could be avoided, and it fixes couple handshake bug. 2)trans_msg function re-impled: put a invalid logic before transmitting message to make sure the ACK bit is in a clear status, otherwise there is chance that ACK asserted already before transmitting message and lead to fake ACK polling. (hypervisor side have some tricks to workaround ACK bit being corrupted by VF FLR which hase an side effects that may make guest side ACK bit asserted wrongly), and clear TRANS_MSG words after message transferred. 3)for mailbox_flr_work, it is also re-worked: it takes the mutex lock first if invoked, to block gpu recover's participate too early while hypervisor side is doing VF FLR. (hypervisor sends FLR_NOTIFY to guest before doing VF FLR and sentds FLR_COMPLETE after VF FLR done, and the FLR_NOTIFY will trigger interrupt to guest which lead to mailbox_flr_work being invoked) This can avoid the issue that mailbox trans msg being cleared by its VF FLR. 4)for mailbox_rcv_irq IRQ routine, it should only peek msg and schedule mailbox_flr_work, instead of ACK to hypervisor itself, because FLR_NOTIFY msg sent from hypervisor side doesn't need VF's ACK (this is because VF's ACK would lead to hypervisor clear its trans_valid/msg, and this would cause handshake bug if trans_valid/msg is cleared not due to correct VF ACK but from a wrong VF ACK like this "FLR_NOTIFY" one) This fixed handshake bug that sometimes GUEST always couldn't receive "READY_TO_ACCESS_GPU" msg from hypervisor. 5)seperate polling time limite accordingly: POLL ACK cost no more than 500ms POLL MSG cost no more than 12000ms POLL FLR finish cost no more than 500ms 6) we still need to set adev into in_gpu_reset mode after we received FLR_NOTIFY from host side, this can prevent innocent app wrongly succesed to open amdgpu dri device. FLR_NOFITY is received due to an IDLE hang detected from hypervisor side which indicating GPU is already die in this VF. v2: use MACRO as the offset of mailbox_control register don't test if NOTIFY_CMPL event in rcv_msg since it won't recieve that message anymore Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
Pixel Ding <Pixel.Ding@amd.com> Signed-off-by:
-
Monk Liu authored
mailbox registers can be accessed with a byte boundry according to BIF team, so this patch prepares register byte access and will be used by following patches. Actually, for mailbox registers once the byte field is touched even not changed, the mailbox behaves, so we need the byte width accessing to those sort of regs. Signed-off-by:
-
Hawking Zhang authored
The vram type for dGPU is stored in umc_info while sys mem type for APU is stored in integratedsysteminfo Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
Tom St Denis authored
The commit d296278fd372003fc69588acfd0c0c5edbdf4874 added support for detecting DDR4 but omitted the label that is printed out in amdgpu_bo_init() resulting in a KASAN error. Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Emily Deng authored
The amdgpu_ucode_fini_bo should be called after gfx_v8_0_hw_fini, or it will have KCQ disable failed issue. For Tonga, as it firstly finishes SMC block, and the SMC hw fini will call amdgpu_ucode_fini, which will lead the amdgpu_ucode_fini_bo called before gfx_v8_0_hw_fini, this is incorrect. Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Signed-off-by:
-
Emily Deng authored
The amdgpu_pm_sysfs_fini should call before amdgpu_device_ip_fini, or the adev->pm.dpm_enabled would be set to 0, then the device files related to pp won't be removed by amdgpu_pm_sysfs_fini when unload driver. Signed-off-by:
-
Christian König authored
We don't need the page array for prime shared BOs, stop allocating it. Signed-off-by:
-
Christian König authored
This allows drivers to only allocate dma addresses, but not a page array. Signed-off-by:
-
Christian König authored
Let's stop mangling everything in a single header and create one header per object instead. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - Query uAPI interface (used for GPU topology information currently) * Mesa: https://patchwork.freedesktop.org/series/38795/ Driver Changes: - Increase PSR2 size for CNL (DK) - Avoid retraining LSPCON link unnecessarily (Ville) - Decrease request signaling latency (Chris) - GuC error capture fix (Daniele) * tag 'drm-intel-next-2018-03-08' of git://anongit.freedesktop.org/drm/drm-intel: (127 commits) drm/i915: Update DRIVER_DATE to 20180308 drm/i915: add schedule out notification of preempted but completed request drm/i915: expose rcs topology through query uAPI drm/i915: add query uAPI drm/i915: add rcs topology to error state drm/i915/debugfs: add rcs topology entry drm/i915/debugfs: reuse max slice/subslices already stored in sseu drm/i915: store all subslice masks drm/i915/guc: work around gcc-4.4.4 union initializer issue drm/i915/cnl: Add Wa_2201832410 drm/i915/icl: Gen11 forcewake support drm/i915/icl: Add Indirect Context Offset for Gen11 drm/i915/icl: Enhanced execution list support drm/i915/icl: new context descriptor support drm/i915/icl: Correctly initialize the Gen11 engines drm/i915: Assert that the request is indeed complete when signaled from irq drm/i915: Handle changing enable_fbc parameter at runtime better. drm/i915: Track whether the DP link is trained or not drm/i915: Nuke intel_dp->channel_eq_status drm/i915: Move SST DP link retraining into the ->post_hotplug() hook ...
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
Major points for this pull request: - Add dGPU support for amdkfd initialization code and queue handling. It's not complete support since the GPUVM part is missing (the under debate stuff). - Enable PCIe atomics for dGPU if present - Various adjustments to the amdgpu<-->amdkfd interface for dGPUs - Refactor IOMMUv2 code to allow loading amdkfd without IOMMUv2 in the system - Add HSA process eviction code in case of system memory pressure - Various fixes and small changes * tag 'drm-amdkfd-next-2018-03-11' of git://people.freedesktop.org/~gabbayo/linux: (24 commits) uapi: Fix type used in ioctl parameter structures drm/amdkfd: Implement KFD process eviction/restore drm/amdkfd: Add GPUVM virtual address space to PDD drm/amdkfd: Remove unaligned memory access drm/amdkfd: Centralize IOMMUv2 code and make it conditional drm/amdgpu: Add submit IB function for KFD drm/amdgpu: Add GPUVM memory management functions for KFD drm/amdgpu: add amdgpu_sync_clone drm/amdgpu: Update kgd2kfd_shared_resources for dGPU support drm/amdgpu: Add KFD eviction fence drm/amdgpu: Remove unused kfd2kgd interface drm/amdgpu: Fix wrong mask in get_atc_vmid_pasid_mapping_pasid drm/amdgpu: Fix header file dependencies drm/amdgpu: Replace kgd_mem with amdgpu_bo for kernel pinned gtt mem drm/amdgpu: remove useless BUG_ONs drm/amdgpu: Enable KFD initialization on dGPUs drm/amdkfd: Add dGPU device IDs and device info drm/amdkfd: Add dGPU support to kernel_queue_init drm/amdkfd: Add dGPU support to the MQD manager drm/amdkfd: Add dGPU support to the device queue manager ...
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.17: UAPI Changes: plane: Add color encoding/range properties (Jyri) nouveau: Replace iturbt_709 property with color_encoding property (Ville) Core Changes: atomic: Move plane clipping into plane check helper (Ville) property: Multiple new property checks/verification (Ville) Driver Changes: rockchip: Fixes & improvements for rk3399/chromebook plus (various) sun4i: Add H3/H5 HDMI support (Jernej) i915: Add support for limited/full-range ycbcr toggling (Ville) pl111: Add bandwidth checking/limiting (Linus) Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Jyri Sarha <jsarha@ti.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> * tag 'drm-misc-next-2018-03-09-3' of git://anongit.freedesktop.org/drm/drm-misc: (85 commits) drm/rockchip: Don't use atomic constructs for psr drm/rockchip: analogix_dp: set psr activate/deactivate when enable/disable bridge drm/rockchip: dw_hdmi: Move HDMI vpll clock enable to bind() drm/rockchip: inno_hdmi: reorder clk_disable_unprepare call in unbind drm/rockchip: inno_hdmi: Fix error handling path. drm/rockchip: dw-mipi-dsi: Fix connector and encoder cleanup. drm/nouveau: Replace the iturbt_709 prop with the standard COLOR_ENCODING prop drm/pl111: Use max memory bandwidth for resolution drm/bridge: sii902x: Retry status read after DDI I2C drm/pl111: Handle the RealView variant separately drm/pl111: Make the default BPP a per-variant variable drm: simple_kms_helper: Fix .mode_valid() documentation bridge: Elaborate a bit on dumb VGA bridges in Kconfig drm/atomic: Add new reverse iterator over all plane state (V2) drm: Reject bad property flag combinations drm: Make property flags u32 drm/uapi: Deprecate DRM_MODE_PROP_PENDING drm: WARN when trying to add enum value > 63 to a bitmask property drm: WARN when trying add enum values to non-enum/bitmask properties drm: Reject replacing property enum values ...
-
Dave Airlie authored
This was stopping me building on ARM after last pull. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
- 09 Mar, 2018 2 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More stuff for 4.17. Highlights: - More fixes for "wattman" like functionality (fine grained clk/voltage control) - Add more power profile infrastucture (context based dpm) - SR-IOV fixes - Add iomem debugging interface for use with umr - Powerplay and cgs cleanups - DC fixes and cleanups - ttm improvements - Misc cleanups all over * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (143 commits) drm/amdgpu:Always save uvd vcpu_bo in VM Mode drm/amdgpu:Correct max uvd handles drm/amdgpu: replace iova debugfs file with iomem (v3) drm/amd/display: validate plane format on primary plane drm/amdgpu: Clean sdma wptr register when only enable wptr polling drm/amd/amdgpu: re-add missing GC 9.1 and SDMA0 4.1 sh_mask header files drm/amdgpu: give warning before sleep in kiq_r/wreg drm/amdgpu: further mitigate workaround for i915 drm/amdgpu: drop gtt->adev drm/amdgpu: add amdgpu_evict_gtt debugfs entry drm/amd/pp: Add #ifdef checks for CONFIG_ACPI drm/amd/pp: fix "Delete the wrapper layer of smu_allocate/free_memory" drm/amd/pp: Drop wrapper functions for upper/lower_32_bits drm/amdgpu: Delete cgs wrapper functions for gpu memory manager drm/amd/pp: Delete the wrapper layer of smu_allocate/free_memory drm/amd/pp: Remove cgs wrapper function for temperature update Revert "drm/amd/pp: Add a pp feature mask bit for AutoWattman feature" drm/amd/pp: Add auto power profilng switch based on workloads (v2) drm/amd/pp: Revert gfx/compute profile switch sysfs drm/amd/pp: Fix sclk in highest two levels when compute on smu7 ...
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- Convert LVDS support to a drm_bridge driver - Add DT bindings for the R8A77995 SoC - Add DT bindings and driver support for the R8A77970 SoC Note that the LVDS conversion depends on a patch series from Frank Rowand that will make it upstream through Rob Herring's tree. Frank has provided a stable branch based on v4.16-rc1 with the patches, and both Rob and I have merged it into our trees. This should thus generate no conflict when reaching -next. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: dt-bindings: display: renesas: lvds: Document r8a77995 bindings dt-bindings: display: renesas: du: Document r8a77995 bindings drm: rcar-du: lvds: Add R8A77970 support drm: rcar-du: Add R8A77970 support dt-bindings: display: renesas: lvds: Document R8A77970 bindings dt-bindings: display: renesas: du: Document R8A77970 bindings drm: rcar-du: Convert LVDS encoder code to bridge driver drm: rcar-du: Fix legacy DT to create LVDS encoder nodes dt-bindings: display: renesas: Deprecate LVDS support in the DU bindings dt-bindings: display: renesas: Add R-Car LVDS encoder DT bindings of: improve reporting invalid overlay target path of: convert unittest overlay devicetree source to sugar syntax of: Documentation: of_overlay_apply() replaced by of_overlay_fdt_apply() of: change overlay apply input data from unflattened to FDT x86: devicetree: fix config option around x86_flattree_get_config()
-
- 08 Mar, 2018 17 commits
-
-
Sean Paul authored
Instead of using timer and spinlocks, use delayed_work and mutexes for rockchip psr. This allows us to make blocking calls when enabling/disabling psr (which is sort of important given we're talking over dpcd to the display). Cc: Caesar Wang <wxt@rock-chips.com> Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180305222324.5872-3-enric.balletbo@collabora.com
-
zain wang authored
There's a race between when bridge_disable and when vop_crtc_disable are called. If the flush timer triggers a new psr work between these, we will operate eDP without power shutdowned by bridge_disable. In this case, moving activate/deactivate to enable/disable bridge to avoid it. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
zain wang <wzz@rock-chips.com> Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
The HDMI vpll clock should be enabled when bind() is called. So move the clk_prepare_enable of that clock to bind() function and add the missing clk_disable_unprepare() required in error handling path and unbind(). Fixes: 12b9f204 ("drm: bridge/dw_hdmi: add rockchip rk3288 support") Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
In bind the clk_prepare_enable of the HDMI pclk is called before adding the i2c_adapter. So it should be the other way around in unbind, first remove the i2c_adapter and then call the clk_disable_unprepare. Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by:
-
Jeffy Chen authored
Add missing error handling in bind(). Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by:
-
Jeffy Chen authored
In bind()'s error handling path call destroy functions instead of cleanup functions for encoder and connector and reorder to match how is called in bind(). In unbind() call the connector and encoder destroy functions. Signed-off-by:
-
Ville Syrjälä authored
Replace the ad-hoc iturbt_709 property with the new standard COLOR_ENCODING property. Compiles, but not tested. v2: Fix typos (Ilia) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: nouveau@lists.freedesktop.org Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220134816.15229-1-ville.syrjala@linux.intel.comReviewed-by:
Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Ben Skeggs <bskeggs@redhat.com> #irc
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-next-2018-03-08 - big refactor for shadow ppgtt (Changbin) - KBL context save/restore via LRI cmd (Weinan) - misc smatch fixes (Zhenyu) - Properly unmap dma for guest page (Changbin) - other misc fixes (Xiong, etc.) Signed-off-by:
-
Weinan Li authored
There is one corner case missing schedule out notification of the preempted request. The preempted request is just completed when preemption happen, then it will be canceled and won't be resubmitted later, GVT-g will lost the schedule out notification. Here add schedule out notification if found the preempted request has been completed. v2: - refine description, add completed check and notification in execlists_cancel_port_requests. (Chris) v3: - use ternary confitional, remove local variable. (Tvrtko) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Weinan Li <weinan.z.li@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Lionel Landwerlin authored
With the introduction of asymmetric slices in CNL, we cannot rely on the previous SUBSLICE_MASK getparam to tell userspace what subslices are available. Here we introduce a more detailed way of querying the Gen's GPU topology that doesn't aggregate numbers. This is essential for monitoring parts of the GPU with the OA unit, because counters need to be normalized to the number of EUs/subslices/slices. The current aggregated numbers like EU_TOTAL do not gives us sufficient information. The Mesa series making use of this API is : https://patchwork.freedesktop.org/series/38795/ As a bonus we can draw representations of the GPU : https://imgur.com/a/vuqpa v2: Rename uapi struct s/_mask/_info/ (Tvrtko) Report max_slice/subslice/eus_per_subslice rather than strides (Tvrtko) Add uapi macros to read data from *_info structs (Tvrtko) v3: Use !!(v & DRM_I915_BIT()) for uapi macros instead of custom shifts (Tvrtko) v4: factorize query item writting (Tvrtko) tweak uapi struct/define names (Tvrtko) v5: Replace ALIGN() macro (Chris) v6: Updated uapi comments (Tvrtko) Moved flags != 0 checks into vfuncs (Tvrtko) v7: Use access_ok() before copying anything, to avoid overflows (Chris) Switch BUG_ON() to GEM_WARN_ON() (Tvrtko) v8: Tweak uapi comments style to match the coding style (Lionel) v9: Fix error in comment about computation of enabled subslice (Tvrtko) v10: Fix/update comments in uAPI (Sagar) v11: Drop drm_i915_query_(slice|subslice|eu)_info in favor of a single drm_i915_query_topology_info (Joonas) v12: Add subslice_stride/eu_stride in drm_i915_query_topology_info (Joonas) v13: Fix comment in uAPI (Joonas) Signed-off-by:Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Lionel Landwerlin authored
There are a number of information that are readable from hardware registers and that we would like to make accessible to userspace. One particular example is the topology of the execution units (how are execution units grouped in subslices and slices and also which ones have been fused off for die recovery). At the moment the GET_PARAM ioctl covers some basic needs, but generally is only able to return a single value for each defined parameter. This is a bit problematic with topology descriptions which are array/maps of available units. This change introduces a new ioctl that can deal with requests to fill structures of potentially variable lengths. The user is expected fill a query with length fields set at 0 on the first call, the kernel then sets the length fields to the their expected values. A second call to the kernel with length fields at their expected values will trigger a copy of the data to the pointed memory locations. The scope of this uAPI is only to provide information to userspace, not to allow configuration of the device. v2: Simplify dispatcher code iteration (Tvrtko) Tweak uapi drm_i915_query_item structure (Tvrtko) v3: Rename pad fields into flags (Chris) Return error on flags field != 0 (Chris) Only copy length back to userspace in drm_i915_query_item (Chris) v4: Use array of functions instead of switch (Chris) v5: More comments in uapi (Tvrtko) Return query item errors in length field (All) v6: Tweak uapi comments style to match the coding style (Lionel) v7: Add i915_query.h (Joonas) v8: (Lionel) Change the behavior of the item iterator to report invalid queries into the query item rather than stopping the iteration. This enables userspace applications to query newer items on older kernels and only have failure on the items that are not supported. v9: Edit copyright headers (Joonas) v10: Typos & comments in uapi (Joonas) Signed-off-by: -
Lionel Landwerlin authored
This might be useful information for developers looking at an error state. v2: Place topology towards the end of the error state (Chris) v3: Reuse common printing code (Michal) v4: Make this a one-liner (Chris) Signed-off-by:
-
Lionel Landwerlin authored
While the end goal is to make this information available to userspace through a new ioctl, there is no reason we can't display it in a human readable fashion through debugfs. slice0: 3 subslice(s) (0x7): subslice0: 8 EUs (0xff) subslice1: 8 EUs (0xff) subslice2: 8 EUs (0xff) subslice3: 0 EUs (0x0) slice1: 3 subslice(s) (0x7): subslice0: 8 EUs (0xff) subslice1: 8 EUs (0xff) subslice2: 8 EUs (0xff) subslice3: 0 EUs (0x0) slice2: 3 subslice(s) (0x7): subslice0: 8 EUs (0xff) subslice1: 8 EUs (0xff) subslice2: 8 EUs (0xff) subslice3: 0 EUs (0x0) v2: Reformat debugfs printing (Tvrtko) Use the new EU mask helper (Tvrtko) v3: Move printing code to intel_device_info.c to be shared with error state (Michal) v4: Bump u8 to u16 when using sseu_get_eus() (Lionel) Suggested-by: -
Lionel Landwerlin authored
Now that we have that information in topology fields, let's just reuse it. v2: Style tweaks (Tvrtko) Signed-off-by:
-
Lionel Landwerlin authored
Up to now, subslice mask was assumed to be uniform across slices. But starting with Cannonlake, slices can be asymmetric (for example slice0 has different number of subslices as slice1+). This change stores all subslices masks for all slices rather than having a single mask that applies to all slices. v2: Rework how we store total numbers in sseu_dev_info (Tvrtko) Fix CHV eu masks, was reading disabled as enabled (Tvrtko) Readability changes (Tvrtko) Add EU index helper (Tvrtko) v3: Turn ALIGN(v, 8) / 8 into DIV_ROUND_UP(v, BITS_PER_BYTE) (Tvrtko) Reuse sseu_eu_idx() for setting eu_mask on CHV (Tvrtko) Reformat debug prints for subslices (Tvrtko) v4: Change eu_mask helper into sseu_set_eus() (Tvrtko) v5: With Haswell reporting masks & counts, bump sseu_*_eus() functions to use u16 (Lionel) v6: Fix sseu_get_eus() for > 8 EUs per subslice (Lionel) v7: Change debugfs enabels for number of subslices per slice, will need a small igt/pm_sseu change (Lionel) Drop subslice_total field from sseu_dev_info, rely on sseu_subslice_total() to recompute the value instead (Lionel) v8: Remove unused function compute_subslice_total() (Lionel) Signed-off-by: -
Andrew Morton authored
gcc-4.4.4 has problems with initalizers of anon unions. drivers/gpu/drm/i915/intel_guc_log.c: In function 'guc_log_control': drivers/gpu/drm/i915/intel_guc_log.c:64: error: unknown field 'logging_enabled' specified in initializer Work around this. Fixes: 35fe703c ("drm/i915/guc: Change values for i915_guc_log_control") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180308001333.rI2vrNRTY%akpm@linux-foundation.org
-
- 07 Mar, 2018 3 commits
-
-
Rodrigo Vivi authored
"Clock gating bug in GWL may not clear barrier state when an EOT is received, causing a hang the next time that barrier is used." HSDES: 2201832410 Cc: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Rafael Antognolli <rafael.antognolli@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180307220912.3681-1-rodrigo.vivi@intel.com
-
Linus Walleij authored
We were previously selecting 1024x768 and 32BPP as the default set-up for the PL111 consumers. This does not work on elder systems: the device tree bindings support a property "max-memory-bandwidth" in bytes/second that states that if you exceed this the memory bus will saturate. The result is flickering and unstable images. Parse the "max-memory-bandwidth" and respect it when intializing the driver. On the RealView PB11MP, Versatile and Integrator/CP we get a nice console as default with this code. Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180307215819.15814-1-linus.walleij@linaro.org
-
Linus Walleij authored
The following happens when connection a DVI output driven from the SiI9022 using a DVI-to-VGA adapter plug: i2c i2c-0: sendbytes: NAK bailout. i2c i2c-0: sendbytes: NAK bailout. Then no picture. Apparently the I2C engine inside the SiI9022 is not smart enough to try to fall back to DDC I2C. Or the vendor have not integrated the electronics properly. I don't know which one it is. After this, the I2C bus seems stalled and the first attempt to read the status register fails, and the code returns with negative return value, and the display fails to initialized. Instead, retry status readout five times and continue even if this fails. Tested on the ARM Versatile Express with a DVI-to-VGA connector, it now gives picture. Introduce a helper struct device *dev variable to make the code more readable. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
