Benchmark command is used in multiple tests so it should not be
mutated by the tests but CMT test alters span argument. Due to the
order of tests (CMT test runs last), mutating the span argument in CMT
test does not trigger any real problems currently.

Mark benchmark_cmd strings as const and setup the benchmark command
using pointers. Because the benchmark command becomes const, the input
arguments can be used directly. Besides being simpler, using the input
arguments directly also removes the internal size restriction.

CMT test has to create a copy of the benchmark command before altering
the benchmark command.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Benchmark command is initialized before resctrl FS check and
preparation code that can call ksft_exit_skip(). There is no strong
reason why the resctrl FS support check and unmounting it (if already
mounted), has to be done after the benchmark command initialization.

Move benchmark command initialization such that it is done not until
right before the tests commence. This simplifies rollback handling when
benchmark command initialization starts to use dynamic allocation (in a
change following this).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

struct resctrl_val_param contains span member. resctrl_val(), however,
never uses it because the value of span is embedded into the default
benchmark command and parsed from it by run_benchmark().

Remove span from resctrl_val_param. Provide DEFAULT_SPAN for the code
that needs it. CMT and CAT tests communicate span that is different
from the DEFAULT_SPAN between their internal functions which is
converted into passing it directly as a parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

bw_report is always set to "reads" and bm_type is set to "fill_buf" but
is never used.

Set bw_report directly to "reads" in MBA/MBM test and remove bm_type.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Benchmark command must be the last argument because it consumes all the
remaining arguments but help misleadingly shows it as the first
argument. The benchmark command is also shown in quotes but it does not
match with the code.

Correct -b argument place in the help message and remove the quotes.
Tweak also how the options are presented by using ... notation.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Benchmark command is copied into an array in the stack. The array is
BENCHMARK_ARGS items long but the command line could try to provide a
longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63
bytes of space after fitting the terminating \0 character) and user
could have inputted argument longer than that.

Return error in case the benchmark command does not fit to the space
allocated for it.

Fixes: ecdbb911 ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Compiling resctrl selftest after adding a __printf() attribute to
ksft_print_msg() exposes -Wformat warning in show_cache_info().
The format specifier used expects a variable of type int but a long
unsigned int variable is passed instead.

Change the format specifier to match the passed variable.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Compiling mm selftest after adding a __printf() attribute to
ksft_print_msg() exposes -Wformat warning in remap_region().

Fix the wrong format specifier causing the warning.

The mm selftest uses the printf attribute in its full form. Since the
header file that uses it also includes kselftests.h it can use the macro
defined there.

Use __printf() included with kselftests.h instead of the full attribute.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The __printf() macro is used in many tools in the linux kernel to
validate the format specifiers in functions that use printf. The kvm
selftest uses it without putting it in a macro definition while it
also imports the kselftests.h header where the macro attribute is
defined.

Use __printf() from kselftests.h instead of the full attribute.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Compiling sigaltstack selftest after adding a __printf() attribute to
ksft_print_msg() exposes -Wformat warning in main().
The format specifier inside ksft_print_msg() expects a long
unsigned int but the passed variable is of unsigned int type.

Fix the format specifier so it matches the passed variable.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Compiling pidfd selftest after adding a __printf() attribute to
ksft_print_msg() and ksft_test_result_pass() exposes -Wformat warnings
in error_report(), test_pidfd_poll_exec_thread(),
child_poll_exec_test(), test_pidfd_poll_leader_exit_thread(),
child_poll_leader_exit_test().

The ksft_test_result_pass() in error_report() expects a string but
doesn't provide any argument after the format string. All the other
calls to ksft_print_msg() in the functions mentioned above have format
strings that don't match with other passed arguments.

Fix format specifiers so they match the passed variables.

Add a missing variable to ksft_test_result_pass() inside
error_report() so it matches other cases in the switch statement.

Fixes: 2def297e ("pidfd: add tests for NSpid info in fdinfo")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Compiling openat2 selftest after adding a __printf() attribute to
ksft_print_msg() exposes a -Wformat warning in test_openat2_flags().
The wrong format specifier is used for printing test.how->flags
variable.

Change the format specifier to %llX so it matches the printed variable.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Compiling cachestat selftest after adding a __printf() attribute to
ksft_print_msg() exposes a -Wformat warning in print_cachestat().
The format specifier in printf() call expects long int variables and
received long long int.

Change format specifiers to long long int so they match passed
variables.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Kselftest header defines multiple variadic functions that use printf
along with other logic.

There is no format checking for the variadic functions that use
printing inside kselftest.h. Because of this the compiler won't
be able to catch instances of mismatched printf formats and debugging
tests might be more difficult.

Add the common __printf() attribute macro to kselftest.h.

Add __printf() attribute to every function using formatted printing
with variadic arguments.

Adding the attribute and compiling all selftests exposes a number of
-Wformat warnings which were previously unnoticed due to a lack of
format specifiers checking by the compiler.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Currently the bpf selftests are skipped by default, so is someone would
like to run the tests one would need to run:
  $ make TARGETS=bpf SKIP_TARGETS="" kselftest

To overwrite the SKIP_TARGETS that defines bpf by default. Also,
following the BPF instructions[1], to run the bpf selftests one would
need to enter in the tools/testing/selftests/bpf/ directory, and then
run make, which is not the standard way to run selftests per it's
documentation.

For the reasons above stop mentioning bpf in the kselftests as examples
of how to run a test suite.

[1]: Documentation/bpf/bpf_devel_QA.rst
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

These duplicate defines should automatically be picked up from kernel
headers.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Remove duplicate defines which are already defined in kernel headers and
re-definition isn't required.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Remove duplicate defines which are already included in kernel headers.
MAX_PID_NS_LEVEL macro is used inside kernel only. It isn't exposed to
userspace. So it is never defined in test application. Remove #ifndef in
this case.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

These duplicate defines should automatically be picked up from kernel
headers. Use KHDR_INCLUDES to add kernel header files.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Currently the nsleep-lat test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Currently the posix_timers test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.

As part of this fix the printing of diagnostics in the unlikely event that
the pthread APIs fail, these were using perror() but the API functions
directly return an error code instead of setting errno.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Currently the execveat test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.

The main trick with this is that, being an exec() related test, the
program executes itself and returns specific exit codes to verify
success meaning that we need to only use the top level kselftest
header/summary functions when invoked directly rather than when run as
part of a test.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The standard library perror() function provides a convenient way to print
an error message based on the current errno but this doesn't play nicely
with KTAP output. Provide a helper which does an equivalent thing in a KTAP
compatible format.

nolibc doesn't have a strerror() and adding the table of strings required
doesn't seem like a good fit for what it's trying to do so when we're using
that only print the errno.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

As a general rule, the name of the selftest is printed at the beginning
of every message.

Use "static_keys" (name of the test itself) consistently instead of mixing
"static_key" and "static_keys" at the beginning of the messages in the
test_static_keys script.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The ret variable is used to check function return values and assigning
values to it on error has no effect as it is an unused value.

The current implementation uses an additional variable (fret) to return
the error value, which in this case is unnecessary and lead to the above
described misuse. There is no restriction in the current implementation
to always return -1 on error and the actual negative error value can be
returned safely without storing -1 in a specific variable.

Simplify the error checking by using a single variable which always
holds the returned value.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Some kselftests has a per-arch config,
e.g. tools/testing/selftests/bpf/config.s390x.

Make sure these configs are picked up by the kselftest-merge target.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The kselftest-merge target walks all kselftests configs, and merges
them. However, builtin does not have precedence over modules. This
breaks some of the tests, e.g.:

$ grep CONFIG_NF_NAT tools/testing/selftests/{bpf,net}/config
tools/testing/selftests/bpf/config:CONFIG_NF_NAT=y
tools/testing/selftests/net/config:CONFIG_NF_NAT=m

Here, the net config will set NF_NAT to module, which makes it clunky
to run the BPF tests.

Add '-y' to scripts/kconfig/merge_config.sh.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

dmabuf-heaps builds a dmabuf-heap binary that can be ignored by git.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

tdx builds a tdx_guest_test binary that can be ignored by git.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

user_events builds a series of binaries that can be ignored by git.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

When building with Clang, I am getting many warnings from the selftests/rseq tree.

Here's one such example from rseq tree:
|  param_test.c:1234:10: error: address argument to atomic operation must be a pointer to _Atomic type ('intptr_t *' (aka 'long *') invalid)
|   1234 |         while (!atomic_load(&args->percpu_list_ptr)) {}
|        |                 ^           ~~~~~~~~~~~~~~~~~~~~~~
|  /usr/local/google/home/justinstitt/repos/tc-build/build/llvm/final/lib/clang/18/include/stdatomic.h:140:29: note: expanded from macro 'atomic_load'
|    140 | #define atomic_load(object) __c11_atomic_load(object, __ATOMIC_SEQ_CST)
|        |                             ^                 ~~~~~~

Use compiler builtins `__atomic_load_n()` and `__atomic_store_n()` with
accompanying __ATOMIC_ACQUIRE and __ATOMIC_RELEASE, respectively. This
will fix the warnings because the compiler builtins do not expect their
arguments to have _Atomic type. This should also make TSAN happier.

Link: https://github.com/ClangBuiltLinux/linux/issues/1698
Link: https://github.com/ClangBuiltLinux/continuous-integration2/issues/61Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

When running the test for the damon subsystem, there are a lot of
warnings because test scripts do not have executable permission,
for example:

Warning: file debugfs_attrs.sh is not executable
Warning: file debugfs_schemes.sh is not executable
Warning: file debugfs_target_ids.sh is not executable
...

This patch adds executable permission to test scripts to eliminate
these warnings.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - Fix an UV boot crash

   - Skip spurious ENDBR generation on _THIS_IP_

   - Fix ENDBR use in putuser() asm methods

   - Fix corner case boot crashes on 5-level paging

   - and fix a false positive WARNING on LTO kernels"

* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/purgatory: Remove LTO flags
  x86/boot/compressed: Reserve more memory for page tables
  x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
  x86/ibt: Suppress spurious ENDBR
  x86/platform/uv: Use alternate source for socket to node data

Pull scheduler fixes from Ingo Molnar:
 "Fix a performance regression on large SMT systems, an Intel SMT4
  balancing bug, and a topology setup bug on (Intel) hybrid processors"

* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
  sched/fair: Fix SMT4 group_smt_balance handling
  sched/fair: Optimize should_we_balance() for large SMT systems

Pull objtool fix from Ingo Molnar:
 "Fix a cold functions related false-positive objtool warning that
  triggers on Clang"

* tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix _THIS_IP_ detection for cold functions

Pull WARN fix from Ingo Molnar:
 "Fix a missing preempt-enable in the WARN() slowpath"

* tag 'core-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  panic: Reenable preemption in WARN slowpath

The choose_32_64() macros were added to deal with an odd inconsistency
between the 32-bit and 64-bit layout of 'struct stat' way back when in
commit a52dd971 ("vfs: de-crapify "cp_new_stat()" function").

Then a decade later Mikulas noticed that said inconsistency had been a
mistake in the early x86-64 port, and shouldn't have existed in the
first place.  So commit 932aba1e ("stat: fix inconsistency between
struct stat and struct compat_stat") removed the uses of the helpers.

But the helpers remained around, unused.

Get rid of them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull smb client fixes from Steve French:
 "Three small SMB3 client fixes, one to improve a null check and two
  minor cleanups"

* tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix some minor typos and repeated words
  smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
  smb3: move server check earlier when setting channel sequence number

Pull smb server fixes from Steve French:
 "Two ksmbd server fixes"

* tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbd:
  ksmbd: fix passing freed memory 'aux_payload_buf'
  ksmbd: remove unneeded mark_inode_dirty in set_info_sec()