Pull EDAC fixes from Borislav Petkov:

 - Fix two issues with MI300 address translation logic

* tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  RAS/AMD/ATL: Use system settings for MI300 DRAM to normalized address translation
  RAS/AMD/ATL: Fix MI300 bank hash

Merge tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:

 - Update tracepoints events introduced in v6.10-rc1 so that it includes
   the numeric identifier of host card in which the event happens

 - replace wiki URL with the current website URL in Kconfig

* tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: record card index in bus_reset_handle tracepoints event
  firewire: core: record card index in tracepoinrts events derived from bus_reset_arrange_template
  firewire: core: record card index in async_phy_inbound tracepoints event
  firewire: core: record card index in async_phy_outbound_complete tracepoints event
  firewire: core: record card index in async_phy_outbound_initiate tracepoints event
  firewire: core: record card index in tracepoinrts events derived from async_inbound_template
  firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template
  firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template
  firewire: fix website URL in Kconfig

Commit 66601a29 ("leds: class: If no default trigger is given, make
hw_control trigger the default trigger") causes ledtrig-netdev to get
set as default trigger on various network LEDs.

This causes users to hit a pre-existing AB-BA deadlock issue in
ledtrig-netdev between the LED-trigger locks and the rtnl mutex,
resulting in hung tasks in kernels >= 6.9.

Solving the deadlock is non trivial, so for now revert the change to
set the hw_control trigger as default trigger, so that ledtrig-netdev
no longer gets activated automatically for various network LEDs.

The netdev trigger is not needed because the network LEDs are usually under
hw-control and the netdev trigger tries to leave things that way so setting
it as the active trigger for the LED class device is a no-op.

Fixes: 66601a29 ("leds: class: If no default trigger is given, make hw_control trigger the default trigger")
Reported-by: Genes Lists <lists@sapience.com>
Closes: https://lore.kernel.org/all/9d189ec329cfe68ed68699f314e191a10d4b5eda.camel@sapience.com/Reported-by: Johannes Wüller <johanneswueller@gmail.com>
Closes: https://lore.kernel.org/lkml/e441605c-eaf2-4c2d-872b-d8e541f4cf60@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The currently used normalized address format is not applicable to all
MI300 systems. This leads to incorrect results during address
translation.

Drop the fixed layout and construct the normalized address from system
settings.

Fixes: 87a61237 ("RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240607-mi300-dram-xl-fix-v1-2-2f11547a178c@amd.com

Pull xfs fix from Chandan Babu:
 "Ensure xfs incore superblock's allocated inode counter, free inode
  counter, and free data block counter are all zero or positive when
  they are copied over from xfs_mount->m_[icount,ifree,fdblocks]
  respectively"

* tag 'xfs-6.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: make sure sb_fdblocks is non-negative

Pull smb server fixes from Steve French:
 "Two small smb3 server fixes:

   - set xatttr fix

   - pathname parsing check fix"

* tag '6.10-rc3-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix missing use of get_write in in smb2_set_ea()
  ksmbd: move leading slash check to smb2_get_name()

Pull x86 fixes from Ingo Molnar:

 - Fix the 8 bytes get_user() logic on x86-32

 - Fix build bug that creates weird & mistaken target directory under
   arch/x86/

* tag 'x86-urgent-2024-06-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Don't add the EFI stub to targets, again
  x86/uaccess: Fix missed zeroing of ia32 u64 get_user() range checking

Pull timer fix from Ingo Molnar:
 "Fix boot-time warning in tick_setup_device()"

* tag 'timers-urgent-2024-06-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/nohz_full: Don't abuse smp_call_function_single() in tick_setup_device()

The bus reset event occurs in the bus managed by one of 1394 OHCI
controller in Linux system, however the existing tracepoints events has
the lack of data about it to distinguish the issued hardware from the
others.

This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.

Link: https://lore.kernel.org/r/20240613131440.431766-9-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.

This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.

Link: https://lore.kernel.org/r/20240613131440.431766-8-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.

This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.

Link: https://lore.kernel.org/r/20240613131440.431766-7-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.

This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.

Link: https://lore.kernel.org/r/20240613131440.431766-6-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

The asynchronous transaction is initiated on one of 1394 OHCI
controller, however the existing tracepoints events has the lack of data
about it.

This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.

Link: https://lore.kernel.org/r/20240613131440.431766-5-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.

This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.

Link: https://lore.kernel.org/r/20240613131440.431766-4-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template

The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.

This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.

Link: https://lore.kernel.org/r/20240613131440.431766-3-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template

The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.

This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.

Link: https://lore.kernel.org/r/20240613131440.431766-2-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

The wiki in kernel.org is no longer updated. This commit replaces the
website URL with the latest one.

Link: https://lore.kernel.org/r/20240613090343.416198-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Pull s390 fixes from Vasily Gorbik:

 - A couple of fixes for regressions resulting from the uncoupling of
   physical vs virtual kernel address spaces: fix the mapping of the
   kernel image using large pages; enforce alignment checks on physical
   addresses before creating large pages

 - Update defconfigs

* tag 's390-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: Restore mapping of kernel image using large pages
  s390/mm: Allow large pages only for aligned physical addresses
  s390: Update defconfigs

Pull drm fixes from Dave Airlie:
 "Weekly fixes. Seems a little quieter than usual, but still a bunch of
  stuff across the board. Mostly xe, some exynos and nouveau fixes.

  core:
   - Werror Kconfig fix

  panel:
   - add orientation quirk for Aya Neo KUN
   - fix runtime warning on panel/bridge release

  nouveau:
   - remove unused struct
   - fix wq crash on cards with no display

  amdgpu:
   - fix bo release clear page warning

  xe:
   - update MAINTAINERS
   - Use correct forcewake assertions
   - Assert that VRAM provisioning is only done on DGFX
   - Flush render caches before user-fence signalling on all engines
   - Move the disable_c6 call since it was sometimes never called

  exynos:
   - fix regression with fallback mode
   - fix EDID related memory leak
   - remove redundant code

  komeda:
   - fix debugfs conditional compilations
   - check pointer error value

  renesas:
   - atomic shutdown fix

  mediatek:
   - atomic shutdown fix"

* tag 'drm-fixes-2024-06-15' of https://gitlab.freedesktop.org/drm/kernel:
  arm/komeda: Remove all CONFIG_DEBUG_FS conditional compilations
  drm/xe: move disable_c6 call
  drm/xe: flush engine buffers before signalling user fence on all engines
  drm/xe/pf: Assert LMEM provisioning is done only on DGFX
  drm/xe/xe_gt_idle: use GT forcewake domain assertion
  drm/mediatek: Call drm_atomic_helper_shutdown() at shutdown time
  drm: renesas: shmobile: Call drm_atomic_helper_shutdown() at shutdown time
  drm/nouveau: remove unused struct 'init_exec'
  drm/nouveau: don't attempt to schedule hpd_work on headless cards
  drm/amdgpu: Fix the BO release clear memory warning
  drm/bridge/panel: Fix runtime warning on panel bridge release
  drm/komeda: check for error-valued pointer
  drm: panel-orientation-quirks: Add quirk for Aya Neo KUN
  drm/exynos/vidi: fix memory leak in .get_modes()
  drm/exynos: dp: drop driver owner initialization
  drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
  drm: have config DRM_WERROR depend on !WERROR
  MAINTAINERS: Update Xe driver maintainers
  MAINTAINERS: update Xe driver maintainers

Pull VFIO fixes from Alex Williamson:
 "Fix long standing lockdep issue of using remap_pfn_range() from the
  vfio-pci fault handler for mapping device MMIO. Commit ba168b52
  ("mm: use rwsem assertion macros for mmap_lock") now exposes this as a
  warning forcing this to be addressed.

  remap_pfn_range() was used here to efficiently map the entire vma, but
  it really never should have been used in the fault handler and doesn't
  handle concurrency, which introduced complex locking. We also needed
  to track vmas mapping the device memory in order to zap those vmas
  when the memory is disabled resulting in a vma list.

  Instead of all that mess, setup an address space on the device fd
  such that we can use unmap_mapping_range() for zapping to avoid the
  tracking overhead and use the standard vmf_insert_pfn() to insert
  mappings on fault.

  For now we'll iterate the vma and opportunistically try to insert
  mappings for the entire vma. This aligns with typical use cases, but
  hopefully in the future we can drop the iterative approach and make
  use of huge_fault instead, once vmf_insert_pfn{pud,pmd}() learn to
  handle pfnmaps"

* tag 'vfio-v6.10-rc4' of https://github.com/awilliam/linux-vfio:
  vfio/pci: Insert full vma on mmap'd MMIO fault
  vfio/pci: Use unmap_mapping_range()
  vfio: Create vfio_fs_type with inode per device

Merge tag 'drm-misc-fixes-2024-06-14' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

drm-misc-fixes for v6.10-rc4:
- Kconfig fix for WERROR.
- Add panel quirk for Aya Neo KUN
- Small bugfixes in komeda, bridge/panel, amdgpu, nouveau.
- Remove unused nouveau struct.
- Call drm_atomic_helper_shutdown for shmobile and mediatek on shutdown.
- Remove DEBUGFS ifdefs from komeda.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/941c0552-3614-4af1-b04a-0a62c99fd7fb@linux.intel.com

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
     - Discard double free on error conditions (Chunguang)
     - Target Fixes (Daniel)
     - Namespace detachment regression fix (Keith)

 - Fix for an issue with flush requests and queuelist reuse (Chengming)

 - nbd sparse annotation fixes (Christoph)

 - unmap and free bio mapped data via submitter (Anuj)

 - loop discard/fallocate unsupported fix (Cyril)

 - Fix for the zoned write plugging added in this release (Damien)

 - sed-opal wrong address fix (Su)

* tag 'block-6.10-20240614' of git://git.kernel.dk/linux:
  loop: Disable fallocate() zero and discard if not supported
  nvme: fix namespace removal list
  nbd: Remove __force casts
  nvmet: always initialize cqe.result
  nvmet-passthru: propagate status from id override functions
  nvme: avoid double free special payload
  block: unmap and free user mapped integrity via submitter
  block: fix request.queuelist usage in flush
  block: Optimize disk zone resource cleanup
  block: sed-opal: avoid possible wrong address reference in read_sed_opal_key()

Pull io_uring fixes from Jens Axboe:
 "Two fixes from Pavel headed to stable:

   - Ensure that the task state is correct before attempting to grab a
     mutex

   - Split cancel sequence flag into a separate variable, as it can get
     set by someone not owning the request (but holding the ctx lock)"

* tag 'io_uring-6.10-20240614' of git://git.kernel.dk/linux:
  io_uring: fix cancellation overwriting req->flags
  io_uring/rsrc: don't lock while !TASK_RUNNING

Pull SCSI fixes from James Bottomley:
 "Three obvious driver fixes and two core fixes.

  The two core fixes are to disable Command Duration Limits by default
  to fix an inconsistency in SATA and some USB devices. The other is to
  change the default read size for block zero to follow the device
  preference (some USB bridges preferring 16 byte commands don't have a
  translation for READ(10) and thus don't scan properly)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpi3mr: Fix ATA NCQ priority support
  scsi: ufs: core: Quiesce request queues before checking pending cmds
  scsi: core: Disable CDL by default
  scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory
  scsi: sd: Use READ(16) when reading block zero on large capacity disks

Pull iommu fix from Joerg Roedel:
 "A single patch that fixes a regression which several people reported:

   - AMD-Vi: Fix regression causing panics"

* tag 'iommu-fix-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix panic accessing amd_iommu_enable_faulting

Pull power management fix from Rafael Wysocki:
 "Restore the behavior of the no_turbo sysfs attribute in the
  intel_pstate driver which allowed users to make the driver start using
  turbo P-states if they have been enabled on the fly by the firmware
  after OS initialization (Rafael Wysocki)"

* tag 'pm-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Check turbo_is_disabled() in store_no_turbo()

Pull ACPI fixes from Rafael Wysocki:
 "These fix a recent regression in the ACPI EC driver and make system
  suspend work on multiple platforms where StorageD3Enable _DSD is
  missing in the ACPI tables.

  Specifics:

   - Make the ACPI EC driver directly evaluate an "orphan" _REG method
     under the EC device, if present, which stopped being evaluated
     after the driver had started to install its EC address space
     handler at the root of the ACPI namespace (Rafael Wysocki)

   - Make more devices put NVMe storage devices into D3 at suspend to
     work around missing StorageD3Enable _DSD in the BIOS (Mario
     Limonciello)"

* tag 'acpi-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: EC: Evaluate orphan _REG under EC device
  ACPI: x86: Force StorageD3Enable on more products

Pull thermal control fixes from Rafael Wysocki:
 "These fix three issues introduced recently, two related to defects in
  ACPI tables supplied by the platform firmware and one cause by a
  thermal core change that went too far:

   - Prevent the thermal core from failing the registration of a cooling
     device if its .get_cur_state() reports an incorrect state to start
     with which may happen for fans handled through firmware-supplied
     AML in ACPI tables (Rafael Wysocki)

   - Make the ACPI thermal zone driver initialize all trip points with
     temperature of 0 centigrade and below as invalid because such trip
     point temperatures do not make sense on systems with ACPI thermal
     control and they cause performance regressions due to permanent
     thermal mitigations to occur (Rafael Wysocki)

   - Restore passive polling management in the Step-Wise thermal
     governor that uses it to ensure that all cooling devices used for
     thermal mitigation will go back to their initial states eventually
     (Rafael Wysocki)"

* tag 'thermal-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: gov_step_wise: Restore passive polling management
  thermal: ACPI: Invalidate trip points with temperature of 0 or below
  thermal: core: Do not fail cdev registration because of invalid initial state

Merge a fix for a suspend issue related to storage handling on multiple
systems based on AMD hardware:

 - Make more devices put NVMe storage devices into D3 at suspend to work
   around missing StorageD3Enable _DSD in the BIOS (Mario Limonciello).

* branch acpi-x86:
  ACPI: x86: Force StorageD3Enable on more products

If fallcate is implemented but zero and discard operations are not
supported by the filesystem the backing file is on we continue to fill
dmesg with errors from the blk_mq_end_request() since each time we call
fallocate() on the loop device the EOPNOTSUPP error from lo_fallocate()
ends up propagated into the block layer. In the end syscall succeeds
since the blkdev_issue_zeroout() falls back to writing zeroes which
makes the errors even more misleading and confusing.

How to reproduce:

1. make sure /tmp is mounted as tmpfs
2. dd if=/dev/zero of=/tmp/disk.img bs=1M count=100
3. losetup /dev/loop0 /tmp/disk.img
4. mkfs.ext2 /dev/loop0
5. dmesg |tail

[710690.898214] operation not supported error, dev loop0, sector 204672 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898279] operation not supported error, dev loop0, sector 522 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898603] operation not supported error, dev loop0, sector 16906 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898917] operation not supported error, dev loop0, sector 32774 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899218] operation not supported error, dev loop0, sector 49674 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899484] operation not supported error, dev loop0, sector 65542 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899743] operation not supported error, dev loop0, sector 82442 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900015] operation not supported error, dev loop0, sector 98310 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900276] operation not supported error, dev loop0, sector 115210 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900546] operation not supported error, dev loop0, sector 131078 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0

This patch changes the lo_fallocate() to clear the flags for zero and
discard operations if we get EOPNOTSUPP from the backing file fallocate
callback, that way we at least stop spewing errors after the first
unsuccessful try.

CC: Jan Kara <jack@suse.cz>
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240613163817.22640-1-chrubis@suse.czSigned-off-by: Jens Axboe <axboe@kernel.dk>

Roll -rc3 and current drm/fixes in.

This will also unstuck our for-next branch.
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n,
the compiler will optimize the rest away since they are no longer referenced.

The benefit of removing the conditional compilation is that the build
is actually tested for both CONFIG_DEBUG_FS configuration values.
Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested
much and may fail the build due to the conditional compilation.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606120842.1377267-1-pengfuyuan@kylinos.cnSigned-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Only the current owner of a request is allowed to write into req->flags.
Hence, the cancellation path should never touch it. Add a new field
instead of the flag, move it into the 3rd cache line because it should
always be initialised. poll_refs can move further as polling is an
involved process anyway.

It's a minimal patch, in the future we can and should find a better
place for it and remove now unused REQ_F_CANCEL_SEQ.

Fixes: 521223d7 ("io_uring/cancel: don't default to setting req->work.cancel_seq")
Cc: stable@vger.kernel.org
Reported-by: Li Shi <sl1589472800@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6827b129f8f0ad76fa9d1f0a773de938b240ffab.1718323430.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Core Changes:
- Xe Maintainers update to MAINTAINERS file.

Driver Changes:
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora

Merge tag 'exynos-drm-fixes-for-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

Regression fix
- Fix an regression issue by adding 640x480 fallback mode
  for Exynos HDMI driver.

Bug fix
- Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function.

Code cleanup
- Remove redundant driver owner initialization since platform_driver_register() sets it automatically.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610073839.37430-1-inki.dae@samsung.com

Pull NVMe fixes from Keith:

"nvme fixes for Linux 6.10

 - Discard double free on error conditions (Chunguang)
 - Target Fixes (Daniel)
 - Namespace detachment regression fix (Keith)"

* tag 'nvme-6.10-2024-06-13' of git://git.infradead.org/nvme:
  nvme: fix namespace removal list
  nvmet: always initialize cqe.result
  nvmet-passthru: propagate status from id override functions
  nvme: avoid double free special payload

This function wants to move a subset of a list from one element to the
tail into another list. It also needs to use the srcu synchronize
instead of the regular rcu version. Do this one element at a time
because that's the only to do it.

Fixes: be647e2c ("nvme: use srcu for iterating namespace list")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth and netfilter.

  Slim pickings this time, probably a combination of summer, DevConf.cz,
  and the end of first half of the year at corporations.

  Current release - regressions:

   - Revert "igc: fix a log entry using uninitialized netdev", it traded
     lack of netdev name in a printk() for a crash

  Previous releases - regressions:

   - Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

   - geneve: fix incorrectly setting lengths of inner headers in the
     skb, confusing the drivers and causing mangled packets

   - sched: initialize noop_qdisc owner to avoid false-positive
     recursion detection (recursing on CPU 0), which bubbles up to user
     space as a sendmsg() error, while noop_qdisc should silently drop

   - netdevsim: fix backwards compatibility in nsim_get_iflink()

  Previous releases - always broken:

   - netfilter: ipset: fix race between namespace cleanup and gc in the
     list:set type"

* tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
  af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
  bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
  gve: Clear napi->skb before dev_kfree_skb_any()
  ionic: fix use after netif_napi_del()
  Revert "igc: fix a log entry using uninitialized netdev"
  net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
  net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
  net/ipv6: Fix the RT cache flush via sysctl using a previous delay
  net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
  gve: ignore nonrelevant GSO type bits when processing TSO headers
  net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP
  netfilter: Use flowlabel flow key when re-routing mangled packets
  netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
  netfilter: nft_inner: validate mandatory meta and payload
  tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
  mailmap: map Geliang's new email address
  mptcp: pm: update add_addr counters after connect
  mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
  mptcp: ensure snd_una is properly initialized on connect
  ...

Pull NFS client fixes from Trond Myklebust:
 "Bugfixes:
   - NFSv4.2: Fix a memory leak in nfs4_set_security_label
   - NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long.
   - NFS: Add appropriate memory barriers to the sillyrename code
   - Propagate readlink errors in nfs_symlink_filler
   - NFS: don't invalidate dentries on transient errors
   - NFS: fix unnecessary synchronous writes in random write workloads
   - NFSv4.1: enforce rootpath check when deciding whether or not to trunk

  Other:
   - Change email address for Trond Myklebust due to email server concerns"

* tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: add barriers when testing for NFS_FSDATA_BLOCKED
  SUNRPC: return proper error from gss_wrap_req_priv
  NFSv4.1 enforce rootpath check in fs_location query
  NFS: abort nfs_atomic_open_v23 if name is too long.
  nfs: don't invalidate dentries on transient errors
  nfs: Avoid flushing many pages with NFS_FILE_SYNC
  nfs: propagate readlink errors in nfs_symlink_filler
  MAINTAINERS: Change email address for Trond Myklebust
  NFSv4: Fix memory leak in nfs4_set_security_label

Pull memblock fixes from Mike Rapoport:
 "Fix validation of NUMA coverage.

  memblock_validate_numa_coverage() was checking for a unset node ID
  using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was
  specified by buggy firmware.

  Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
  memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()"

* tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node()
  memblock: make memblock_set_node() also warn about use of MAX_NUMNODES