- 28 Apr, 2016 26 commits
-
-
Tvrtko Ursulin authored
With the previous patch having extended the pinned lifetime of contexts by referencing the previous context from the current request until the latter is retired (completed by the GPU), we can now remove usage of execlist retired queue entirely. This is because the above now guarantees that all execlist object access requirements are satisfied by this new tracking, and we can stop taking additional references and stop keeping request on the execlists retired queue. The latter was a source of significant scalability issues in the driver causing performance hits on some tests. Most dramatical of which was igt/gem_close_race which had run time in tens of minutes which is now reduced to tens of seconds. Signed-off-by:
Tvrtko Ursulin <tvrtko@ursulin.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Tvrtko Ursulin authored
This way in the following patch we can disconnect requests from contexts. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Chris Wilson authored
As the contexts are accessed by the hardware until the switch is completed to a new context, the hardware may still be writing to the context object after the breadcrumb is visible. We must not unpin/unbind/prune that object whilst still active and so we keep the previous context pinned until the following request. We can generalise the tracking we already do via the engine->last_context and move it to the request so that it works equally for execlists and GuC. v2: Drop the execlists double pin as that exposes a race inside the lrc irq handler as it tries to access the context after it may be retired. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-22-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we move the release of the GEM request (i.e. decoupling it from the various lists used for client and context tracking) after it is complete (either by the GPU retiring the request, or by the caller cancelling the request), we can remove the requirement that the final unreference of the GEM request need to be under the struct_mutex. The careful reader may notice that one or two impossible NULL pointer tests are dropped for readability. These pointers cannot be NULL since they are assigned during request construction and never unset. v2,v3: Rebalance execlists by moving the context unpinning. v4: Rebase onto -nightly v5: Avoid trying to rebalance execlist/GuC context pinning, leave that to the next step Signed-off-by:
-
Chris Wilson authored
We can hide more details of execlists from higher level code by removing the explicit call to create an execlist context from execbuffer and into its first use by execlists. Signed-off-by:
-
Chris Wilson authored
Refactor pinning and unpinning of contexts, such that the default context for an engine is pinned during initialisation and unpinned during teardown (pinning of the context handles the reference counting). Thus we can eliminate the special case handling of the default context that was required to mask that it was not being pinned normally. v2: Rebalance context_queue after rebasing. v3: Rebase to -nightly (not 40 patches in) v4: Rebase onto request_alloc unwinding Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-19-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
Rather than reuse the current location of the context in the global GTT for its hardware identifier, use the context's unique ID assigned to it for its whole lifetime. Signed-off-by:
-
Chris Wilson authored
The hardware tracks contexts and expects all live contexts (those active on the hardware) to have a unique identifier. This is used by the hardware to assign pagefaults and the like to a particular context. v2: Reorder to make sure ctx->link is not left dangling if the assignment of a hw_id fails (Mika). v3: We have 21bits of context space, not 20. Signed-off-by:
-
Chris Wilson authored
The comments describing the Context Descriptor Format are off by a bit for the size of the context ID. Signed-off-by:
-
Chris Wilson authored
Rather than being interrupted when we run out of space halfway through the request, and having to restart from the beginning (and returning to userspace), flush a little more free space when we prepare the request. Signed-off-by:
-
Chris Wilson authored
In the next patches, we want to move the work out of freeing the request and into its retirement (so that we can free the request without requiring the struct_mutex). This means that we cannot rely on unreferencing the request to completely teardown the request any more and so we need to manually unwind the failed allocation. In doing so, we reorder the allocation in order to make the unwind simple (and ensure that we don't try to unwind a partial request that may have modified global state) and so we end up pushing the initial preallocation down into the engine request initialisation functions where we have the requisite control over the state of the request. Moving the initial preallocation into the engine is less than ideal: it moves logic to handle a specific problem with request handling out of the common code. On the other hand, it does allow those backends significantly more flexibility in performing its allocations. Signed-off-by:
-
Chris Wilson authored
Now that we share intel_ring_begin(), reserving space for the tail of the request is identical between legacy/execlists and so the tautology can be removed. In the process, we move the reserved space tracking from the ringbuffer on to the request. This is to enable us to reorder the reserved space allocation in the next patch. Signed-off-by:
-
Chris Wilson authored
Combine the near identical implementations of intel_logical_ring_begin() and intel_ring_begin() - the only difference is that the logical wait has to check for a matching ring (which is assumed by legacy). In the process some debug messages are culled as there were following a WARN if we hit an actual error. v2: Updated commentary Signed-off-by:
-
Chris Wilson authored
The code to switch_mm() is already handled by i915_switch_context(), the only difference required to setup the aliasing ppgtt is that we need to emit te switch_mm() on the first context, i.e. when transitioning from engine->last_context == NULL. This allows us to defer the initialisation of the GPU from early device initialisation to first use, which should marginally speed up both. The caveat is that we then defer the context initialisation until first use - i.e. we cannot assume that the GPU engines are initialised. For example, this means that power contexts for rc6 (Ironlake) need to explicitly loaded, as they are. Signed-off-by:
-
Chris Wilson authored
Since we do the l3-remap on context switch, we can remove the redundant early call to set the mapping prior to performing the first context switch. Signed-off-by:
-
Chris Wilson authored
We can use a single MI_LOAD_REGISTER_IMM command packet to write all the L3 remapping registers, shrinking the number of bytes required to emit the context switch. Signed-off-by:
-
Chris Wilson authored
Move the i915_gem_l3_remap function such that it next to the context switching, which is where we perform the L3 remap. Signed-off-by:
-
Chris Wilson authored
In order to force a reload of the context image upon resume, we first need to mark its absence on suspend. Currently we are failing to restore the golden context state and any context w/a to the default context after resume. One oversight corrected, is that we had forgotten to reapply the L3 remapping when restoring the lost default context. v2: Remove deprecated WARN. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-7-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
Similarly to i915_gem_object_pin_map on LLC platforms, we can use the new VMA based io mapping on !LLC to amoritize the cost of ringbuffer pinning and unpinning. Signed-off-by:
-
Chris Wilson authored
By tracking the iomapping on the VMA itself, we can share that area between multiple users. Also by only revoking the iomapping upon unbinding from the mappable portion of the GGTT, we can keep that iomap across multiple invocations (e.g. execlists context pinning). Note that by moving the iounnmap tracking to the VMA, we actually end up fixing a leak of the iomapping in intel_fbdev. v1.5: Rebase prompted by Tvrtko v2: Drop dev_priv parameter, we can recover the i915_ggtt from the vma. v3: Move handling of ioremap space exhaustion to vmap_purge and also allow vmallocs to recover old iomaps. Add Tvrtko's kerneldoc. v4: Fix a use-after-free in shrinker and rearrange i915_vma_iomap v5: Back to i915_vm_to_ggtt v6: Use i915_vma_pin_iomap and i915_vma_unpin_iomap to mark critical sections and ensure the VMA cannot be reaped whilst mapped. v7: Move i915_vma_iounmap so that consumers of the API are not tempted, and add iomem annotations Signed-off-by:
-
Chris Wilson authored
In a couple of places, we have an i915_address_space that we know is really an i915_ggtt that we want to use. Create an inline helper to convert from the i915_address_space subclass into its container. Signed-off-by:
-
Chris Wilson authored
The ioremap() hidden behind the io_mapping_map_wc() convenience helper can be used for remapping multiple pages. Extend the helper so that future callers can use it for larger ranges. Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-3-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
When setting up the overlay page, we pin it into the GGTT (when using virtual addresses) and store the offset as overlay->flip_addr. Rather than doing a lookup of the GGTT address everytime, we can use the known address instead. Signed-off-by:
-
Chris Wilson authored
When releasing the intel_fbdev, we should unpin the framebuffer that we pinned during construction. Signed-off-by:
-
Chris Wilson authored
Propagate the real error from drm_gem_object_init(). Note this also fixes some confusion in the error return from i915_gem_alloc_object... v2: (Matthew Auld) - updated new users of gem_alloc_object from latest drm-nightly - replaced occurrences of IS_ERR_OR_NULL() with IS_ERR() v3: (Joonas Lahtinen) - fix double "From:" in commit message - add goto teardown path v4: (Matthew Auld) - rebase with i915_gem_alloc_object name change Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
-
Chris Wilson authored
Faced with sporadic machine hangs on gen7, that mimic the issue of concurrent writes to the same cacheline and seem to start with commit 9b9ed309 (drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+), let us restore the spinlock around the mmio read. Fixes: 9b9ed309 (drm/i915: Remove forcewake dance from seqno/irq...) Signed-off-by:
-
- 27 Apr, 2016 5 commits
-
-
Ville Syrjälä authored
I just noticed that VLV/CHV have a RAWCLK_FREQ register just like PCH platforms. It lives in the display power well, so we should update it when enabling the power well. Interestingly the BIOS seems to leave it at the reset value (125) which doesn't match the rawclk frequency on VLV/CHV (200 MHz). As always with these register, the spec is extremely vague what the register does. All it says is: "This is used to generate a divided down clock for miscellaneous timers in display." Based on a quick test, at least AUX and PWM appear to be unaffected by this. But since the register is there, let's configure it in accordance with the spec. Note that we have to move intel_update_rawclk() to occur before we touch the power wells, so that the dev_priv->rawclk_freq is already populated when the disp2 enable hook gets called for the first time. I think this should be safe to do on other platforms as well. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461768202-17544-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
Check for VLV/CHV instead if !BXT when re-enabling DPOunit clock gating after DSI disable. That's what we checked when disabling the clock gating when enabling DSI. Also use the same temporary variable name in both cases, and toss in a bit of dev vs. dev_priv cleanup while at it. Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Matthew Auld authored
Prefer a goto teardown path to do all the required cleanup. v2: (Joonas Lahtinen) - remove NULL assignments - rename goto labels Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Add support for CHV gpio programming in DSI gpio elements. v2: Overhaul macros according to Ville's review. v3: Address Ville's review: - swap E and SE gpio ranges - add a note about max SE index - use GPO, not HIZ - swap cfg0 and cfg1 v4: fix port for dsi sequence versions 1 and 2 [Rewritten by Jani, based on earlier work by Yogesh and Deepak.] Signed-off-by:
Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com> Signed-off-by:
Deepak M <m.deepak@intel.com> Reviewed-by:
-
Jani Nikula authored
Only support North Core (NC) GPIOs for now, and assume the vlv gpio table only has NC GPIOs for now. Reviewed-by:
-
- 26 Apr, 2016 5 commits
-
-
Deepak M authored
For dual link panel scenarios there are new fields added in the VBT which indicate on which port the PWM cntrl and CABC ON/OFF commands needs to be sent. v2: Moving the comment to intel_dsi.h(Jani) v3: Renaming the field names (Jani) v4 by Jani: make this patch only about VBT Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by:
-
Yetunde Adebisi authored
This patch adds support for eDP backlight control using DPCD registers to backlight hooks in intel_panel. It checks for backlight control over AUX channel capability and sets up function pointers to get and set the backlight brightness level if supported. v2: Moved backlight functions from intel_dp.c into a new file intel_dp_aux_backlight.c. Also moved reading of eDP display control registers to intel_dp_get_dpcd v3: Correct some formatting mistakes v4: Updated to use AUX backlight control if PWM control is not possible (Jani) v5: Moved call to initialize backlight registers to dp_aux_setup_backlight v6: Check DP_EDP_BACKLIGHT_PIN_ENABLE_CAP is disabled before setting up AUX backlight control. To fix BLM_PWM_ENABLE igt test warnings on bdw_ultra v7: Add enable_dpcd_backlight module parameter. v8: Rebase onto latest drm-intel-nightly branch v9: Remove changes to intel_dp_dpcd_read_wake Split addition edp_dpcd variable into a separate patch Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:Yetunde Adebisi <yetundex.adebisi@intel.com> [Jani: whitepace changes to appease checkpatch] Signed-off-by:
-
Yetunde Adebisi authored
Add new edp_dpcd variable to intel_dp. Read and save eDP Display control capability registers to edp_dpcd. Signed-off-by:
-
Yetunde Adebisi authored
This is used when reading Display Control capability Registers on the sink device. cc: dri-devel@lists.freedesktop.org Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Jani Nikula authored
False ideas introduced in commit 1d96a4a8 Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Mar 18 13:11:10 2016 +0200 drm/i915/dsi: add support for DSI sequence block v2 gpio element Acked-by:
-
- 25 Apr, 2016 4 commits
-
-
Tvrtko Ursulin authored
Can use the new vma->is_gtt to simplify the check and get rid of the local variables. Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461240286-25968-1-git-send-email-tvrtko.ursulin@linux.intel.comReviewed-by:
-
Tvrtko Ursulin authored
Can use the new vma->is_ggtt to simplify the check and remove the local variables. Signed-off-by:
-
Tvrtko Ursulin authored
Can use vma->is_ggtt to simplify the check and also switch the BUG_ON to GEM_BUG_ON which is more appropriate for this. Signed-off-by:
-
Tvrtko Ursulin authored
Only caller is i915_gem_obj_ggtt_size which only cares about GGTT so simplify it and implement under that name. Signed-off-by:
-
