tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt,
port->pps_data.max_volt, port->pps_data.max_curr even before
port partner accepts the requests. This leaves incorrect values
in current_limit and supply_voltage that get exported by
"tcpm-source-psy-". Solving this problem by caching the request
values in req_min_volt, req_max_volt, req_max_curr, req_out_volt,
req_op_curr. min_volt, max_volt, max_curr gets updated once the
partner accepts the request. current_limit, supply_voltage gets updated
once local port's tcpm enters SNK_TRANSITION_SINK when the accepted
current_limit and supply_voltage is enforced.

Fixes: f2a8aa05 ("typec: tcpm: Represent source supply through power_supply")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210407200723.1914388-2-badhri@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcpm_pd_build_request overwrites current_limit and supply_voltage
even before port partner accepts the requests. This leaves stale
values in current_limit and supply_voltage that get exported by
"tcpm-source-psy-". Solving this problem by caching the request
values of current limit/supply voltage in req_current_limit
and req_supply_voltage. current_limit/supply_voltage gets updated
once the port partner accepts the request.

Fixes: f2a8aa05 ("typec: tcpm: Represent source supply through power_supply")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210407200723.1914388-1-badhri@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When dwc2 core is in partial power down mode
loading driver again causes driver fail. Because in
that mode registers are not accessible.

Added a flow of exiting the partial power down mode
to avoid the driver reload failure.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094615.8AE35A0094@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the implementation of exiting from partial power down
power saving mode when PC is resumed.

Added port connection status checking which prevents exiting from
Partial Power Down mode from _dwc2_hcd_resume() if not in Partial
Power Down mode.

Rearranged the implementation to get rid of many "if"
statements.

NOTE: Switch case statement is used for hibernation partial
power down and clock gating mode determination. In this patch
only Partial Power Down is implemented the Hibernation and
clock gating implementations are planned to be added.

Fixes: 6f6d7059 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE")
Cc: <stable@vger.kernel.org>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094607.1A9BAA0094@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With current implementation the port power is being disabled,
which is not required by the programming guide. Also, if there
is a system which works only in "DWC2_POWER_DOWN_PARAM_NONE"
(clock gating) mode the current implementation does not set
Gate hclk bit in pcgctl register.

Rearranges and updates the implementation of entering to partial
power down power saving mode when PC is suspended to get
rid of many "if" statements and removes disabling of port power.

NOTE: Switch case statement is used for hibernation partial
power down and clock gating mode determination. In this patch
only Partial Power Down is implemented the Hibernation and
clock gating implementations are planned to be added.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094559.33541A022E@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to programming guide in host mode, port
power must be turned on in session request
interrupt handlers.

Fixes: 21795c82 ("usb: dwc2: exit hibernation on session request")
Cc: <stable@vger.kernel.org>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094550.75484A0094@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When core is in partial power down state and an external
hub is connected, upper layer sends URB enqueue request,
which results in port reset issue.

Added exit from partial power down state to avoid port
reset issue and process upper layer request correctly.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094542.685BAA0094@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Before changing to connector B exiting from Partial
Power Down is required.

- Added exiting from Partial Power Down mode when
  connector ID status changes to "connId B".
  Because if connector ID status changed to B connector
  while core was in partial power down mode, HANG would
  accrue from a soft reset.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094534.4AA7AA022E@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adds Partial Power Down exiting flow when set port feature
reset is received in suspended state.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094526.4DD7AA022E@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added flow of exiting Partial Power Down in
"dwc2_port_resume()" function when core receives resume.

NOTE: Switch case statement is used for hibernation partial
power down and clock gating mode determination. In this patch
only Partial Power Down is implemented the Hibernation and
clock gating implementations are planned to be added.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094518.6DA1DA022E@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adds flow of entering Partial Power Down in
"dwc2_port_suspend()" function when core receives suspend.

NOTE: Switch case statement is used for hibernation partial
power down and clock gating mode determination. In this patch
only Partial Power Down is implemented the Hibernation and
clock gating implementations are planned to be added.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094510.6C4E9A022E@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Earlier "dwc2_port_suspend()" and "dwc2_port_resume()" functions
were implemented without proper description and host or device mode
difference.

- Added "dwc2_port_suspend" and "dwc2_port_resume" functions to
  "core.h" header file.

- Updated function description in documentation.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094502.61D18A0232@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to programming guide added host partial power
down exit flow in wakeup detected interrupt handler.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094454.5BBCBA0094@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are wrapper functions which are calling device or host
enter/exit partial power down functions.

This change is done because we need to separate device and
host partial power down functions as the programming flow
has a lot of difference between host and device. With this
update during partial power down exit driver relies on
backup value of "GOTGCTL_CURMODE_HOST" to determine the
mode of core before entering to PPD.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094446.6491BA022E@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For host mode Partial Power Down entering and exiting
separate functions are needed to implement the logic.
Earlier the logic was implemented in one function. Which was
confusing the readability. Also both host and device implementations
were in the same function.

- Added host partial power down functions which must be called
by dwc2_enter_partial_power_down()/dwc2_exit_partial_power_down()
functions.

Added function names:
dwc2_host_enter_partial_power_down()
dwc2_host_exit_partial_power_down()

NOTE: There is a checkpatch "CHECK" warning on "udelay(100)".
The delay is needed to properly exit gadget Partial Power Down
A delay less than 100 doesn't work.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094438.56CFBA022E@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For device mode Partial Power Down entering and exiting
separate functions are needed to implement the logic.
Earlier the logic was implemented in one function. Which was
confusing the readability. Also both host and device implementations
were in the same function.

- Added device partial power down functions which must be called
by dwc2_enter_partial_power_down()/dwc2_exit_partial_power_down()
functions.

- Added "in_ppd" flag in "dwc2_hsotg" struct to indicate the
core state after entering into partial power down mode.

Added function names:
dwc2_gadget_enter_partial_power_down()
dwc2_gadget_exit_partial_power_down()

NOTE: There is a checkpatch "CHECK" warning on "udelay(100)".
The delay is needed to properly exit gadget Partial Power Down
A delay less than 100 doesn't work.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210408094430.383B9A0094@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The same values are parsed several times from transfer and event
TRBs by different functions in the same call path, all while processing
one transfer event.

As the TRBs are in DMA memory and can be accessed by the xHC host we want
to avoid this to prevent double-fetch issues.

To resolve this pass the already parsed values to the different functions
in the path of parsing a transfer event
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210406070208.3406266-5-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Max Interrupters supported by the controller is given in a 10bit
wide bitfield, but the driver uses a fixed 128 size array to index these
interrupters.

Klockwork reports a possible array out of bounds case which in theory
is possible. In practice this hasn't been hit as a common number of Max
Interrupters for new controllers is 8, not even close to 128.

This needs to be fixed anyway
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210406070208.3406266-4-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't dereference ctrl_ctx before checking it's valid.
Issue reported by Klockwork
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210406070208.3406266-3-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

return if rhub->ports is null after rhub->ports = kcalloc_node()
Klockwork reported issue
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210406070208.3406266-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is only to make the handling of the class consistent
with the two other susbsystems - the alt mode bus and the
mux class.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210401105847.13026-3-heikki.krogerus@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding a header file for each subsystem - the connector
class, alt mode bus and the class for the muxes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210401105847.13026-2-heikki.krogerus@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the USB fixes in here as well and it resolves a merge issue with
xhci-mtk.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:

 1. Open nosy device for the first time and call ioctl with command
    NOSY_IOC_START, then a new client A will be malloced and added to
    doubly linked list.
 2. Open nosy device for the second time and call ioctl with command
    NOSY_IOC_START, then a new client B will be malloced and added to
    doubly linked list.
 3. Call ioctl with command NOSY_IOC_START for client A, then client A
    will be readded to the doubly linked list. Now the doubly linked
    list is messed up.
 4. Close the first nosy device and nosy_release will be called. In
    nosy_release, client A will be unlinked and freed.
 5. Close the second nosy device, and client A will be referenced,
    resulting in UAF.

The root cause of this bug is that the element in the doubly linked list
is reentered into the list.

Fix this bug by adding a check before inserting a client.  If a client
is already in the linked list, don't insert it.

The following KASAN report reveals it:

   BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
   Write of size 8 at addr ffff888102ad7360 by task poc
   CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
   Call Trace:
     nosy_release+0x1ea/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Allocated by task 337:
     nosy_open+0x154/0x4d0
     misc_open+0x2ec/0x410
     chrdev_open+0x20d/0x5a0
     do_dentry_open+0x40f/0xe80
     path_openat+0x1cf9/0x37b0
     do_filp_open+0x16d/0x390
     do_sys_openat2+0x11d/0x360
     __x64_sys_open+0xfd/0x1a0
     do_syscall_64+0x33/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Freed by task 337:
     kfree+0x8f/0x210
     nosy_release+0x158/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
   The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)

[ Modified to use 'list_empty()' inside proper lock  - Linus ]

Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/Reported-and-tested-by: 马哲宇 (Zheyu Ma) <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull OpenRISC fix from Stafford Horne:
 "Fix duplicate header include in Litex SOC driver"

* tag 'for-linus' of git://github.com/openrisc/linux:
  soc: litex: Remove duplicated header file inclusion

POull io_uring fix from Jens Axboe:
 "Just fixing a silly braino in a previous patch, where we'd end up
  failing to compile if CONFIG_BLOCK isn't enabled.

  Not that a lot of people do that, but kernel bot spotted it and it's
  probably prudent to just flush this out now before -rc6.

  Sorry about that, none of my test compile configs have !CONFIG_BLOCK"

* tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block:
  io_uring: fix !CONFIG_BLOCK compilation failure

The header file <linux/errno.h> is already included above and can be
removed here.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

Pull gfs2 fixes from Andreas Gruenbacher:
 "Two more gfs2 fixes"

* tag 'gfs2-v5.12-rc2-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: report "already frozen/thawed" errors
  gfs2: Flag a withdraw if init_threads() fails

Pull RISC-V fixes from Palmer Dabbelt:
 "A handful of fixes for 5.12:

   - fix a stack tracing regression related to "const register asm"
     variables, which have unexpected behavior.

   - ensure the value to be written by put_user() is evaluated before
     enabling access to userspace memory..

   - align the exception vector table correctly, so we don't rely on the
     firmware's handling of unaligned accesses.

   - build fix to make NUMA depend on MMU, which triggered on some
     randconfigs"

* tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Make NUMA depend on MMU
  riscv: remove unneeded semicolon
  riscv,entry: fix misaligned base for excp_vect_table
  riscv: evaluate put_user() arg before enabling user access
  riscv: Drop const annotation for sp

Pull powerpc fixes from Michael Ellerman:
 "Fix a bug on pseries where spurious wakeups from H_PROD would prevent
  partition migration from succeeding.

  Fix oopses seen in pcpu_alloc(), caused by parallel faults of the
  percpu mapping causing us to corrupt the protection key used for the
  mapping, and cause a fatal key fault.

  Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, and Nathan Lynch"

* tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT
  powerpc/pseries/mobility: handle premature return from H_JOIN
  powerpc/pseries/mobility: use struct for shared state

Merge tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V fixes from Wei Liu:
 "One fix from Lu Yunlong for a double free in hvfb_probe"

* tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  video: hyperv_fb: Fix a double free in hvfb_probe

Merge tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single driver core fix for a reported problem with differed
  probing. It has been in linux-next for a while with no reported
  problems"

* tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: clear deferred probe reason on probe retry

Pull char/misc driver fixes from Greg KH:
 "Here are a few small driver char/misc changes for 5.12-rc6.

  Nothing major here, a few fixes for reported issues:

   - interconnect fixes for problems found

   - fbcon syzbot-found fix

   - extcon fixes

   - firmware stratix10 bugfix

   - MAINTAINERS file update.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  drivers: video: fbcon: fix NULL dereference in fbcon_cursor()
  mei: allow map and unmap of client dma buffer only for disconnected client
  MAINTAINERS: Add linux-phy list and patchwork
  interconnect: Fix kerneldoc warning
  firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
  extcon: Fix error handling in extcon_dev_register
  extcon: Add stubs for extcon_register_notifier_all() functions
  interconnect: core: fix error return code of icc_link_destroy()
  interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes

Pull staging driver fixes from Greg KH:
 "Here are two rtl8192e staging driver fixes for reported problems.

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8192e: Change state information from u16 to u8
  staging: rtl8192e: Fix incorrect source in memcpy()

Pull serial driver fix from Greg KH:
 "Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
  change that showed up in 5.9 that has been reported to cause problems.

  It has been in linux-next for a while with no reported issues"

* tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  soc: qcom-geni-se: Cleanup the code to remove proxy votes

Pull USB fixes from Greg KH:
 "Here are a few small USB driver fixes for 5.12-rc6 to resolve reported
  problems.

  They include:

   - a number of cdc-acm fixes for reported problems. It seems more
     people are using this driver lately...

   - dwc3 driver fixes for reported problems, and fixes for the fixes :)

   - dwc2 driver fixes for reported issues.

   - musb driver fix.

   - new USB quirk additions.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (23 commits)
  usb: dwc2: Prevent core suspend when port connection flag is 0
  usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.
  usb: musb: Fix suspend with devices connected for a64
  usb: xhci-mtk: fix broken streams issue on 0.96 xHCI
  usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable
  usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()
  USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem
  USB: cdc-acm: do not log successful probe on later errors
  USB: cdc-acm: always claim data interface
  USB: cdc-acm: use negation for NULL checks
  USB: cdc-acm: clean up probe error labels
  USB: cdc-acm: drop redundant driver-data reset
  USB: cdc-acm: drop redundant driver-data assignment
  USB: cdc-acm: fix use-after-free after probe failure
  USB: cdc-acm: fix double free on probe failure
  USB: cdc-acm: downgrade message to debug
  USB: cdc-acm: untangle a circular dependency between callback and softint
  cdc-acm: fix BREAK rx code path adding necessary calls
  usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference
  usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield
  ...

Pull SCSI fix from James Bottomley:
 "A single fix to iscsi for a rare race condition which can cause a
  kernel panic"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: Fix race condition between login and sync thread

kernel test robot correctly pinpoints a compilation failure if
CONFIG_BLOCK isn't set:

fs/io_uring.c: In function '__io_complete_rw':
>> fs/io_uring.c:2509:48: error: implicit declaration of function 'io_rw_should_reissue'; did you mean 'io_rw_reissue'? [-Werror=implicit-function-declaration]
    2509 |  if ((res == -EAGAIN || res == -EOPNOTSUPP) && io_rw_should_reissue(req)) {
         |                                                ^~~~~~~~~~~~~~~~~~~~
         |                                                io_rw_reissue
    cc1: some warnings being treated as errors

Ensure that we have a stub declaration of io_rw_should_reissue() for
!CONFIG_BLOCK.

Fixes: 230d50d4 ("io_uring: move reissue into regular IO path")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull block fixes from Jens Axboe:

 - Remove comment that never came to fruition in 22 years of development
   (Christoph)

 - Remove unused request flag (Christoph)

 - Fix for null_blk fake timeout handling (Damien)

 - Fix for IOCB_NOWAIT being ignored for O_DIRECT on raw bdevs (Pavel)

 - Error propagation fix for multiple split bios (Yufen)

* tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
  block: remove the unused RQF_ALLOCED flag
  block: update a few comments in uapi/linux/blkpg.h
  block: don't ignore REQ_NOWAIT for direct IO
  null_blk: fix command timeout completion handling
  block: only update parent bi_status when bio fail