1. 12 Sep, 2016 1 commit
    • Suresh Warrier's avatar
      KVM: PPC: Book3S HV: Handle passthrough interrupts in guest · e3c13e56
      Suresh Warrier authored
      Currently, KVM switches back to the host to handle any external
      interrupt (when the interrupt is received while running in the
      guest). This patch updates real-mode KVM to check if an interrupt
      is generated by a passthrough adapter that is owned by this guest.
      If so, the real mode KVM will directly inject the corresponding
      virtual interrupt to the guest VCPU's ICS and also EOI the interrupt
      in hardware. In short, the interrupt is handled entirely in real
      mode in the guest context without switching back to the host.
      
      In some rare cases, the interrupt cannot be completely handled in
      real mode, for instance, a VCPU that is sleeping needs to be woken
      up. In this case, KVM simply switches back to the host with trap
      reason set to 0x500. This works, but it is clearly not very efficient.
      A following patch will distinguish this case and handle it
      correctly in the host. Note that we can use the existing
      check_too_hard() routine even though we are not in a hypercall to
      determine if there is unfinished business that needs to be
      completed in host virtual mode.
      
      The patch assumes that the mapping between hardware interrupt IRQ
      and virtual IRQ to be injected to the guest already exists for the
      PCI passthrough interrupts that need to be handled in real mode.
      If the mapping does not exist, KVM falls back to the default
      existing behavior.
      
      The KVM real mode code reads mappings from the mapped array in the
      passthrough IRQ map without taking any lock.  We carefully order the
      loads and stores of the fields in the kvmppc_irq_map data structure
      using memory barriers to avoid an inconsistent mapping being seen by
      the reader. Thus, although it is possible to miss a map entry, it is
      not possible to read a stale value.
      
      [paulus@ozlabs.org - get irq_chip from irq_map rather than pimap,
       pulled out powernv eoi change into a separate patch, made
       kvmppc_read_intr get the vcpu from the paca rather than being
       passed in, rewrote the logic at the end of kvmppc_read_intr to
       avoid deep indentation, simplified logic in book3s_hv_rmhandlers.S
       since we were always restoring SRR0/1 anyway, get rid of the cached
       array (just use the mapped array), removed the kick_all_cpus_sync()
       call, clear saved_xirr PACA field when we handle the interrupt in
       real mode, fix compilation with CONFIG_KVM_XICS=n.]
      Signed-off-by: default avatarSuresh Warrier <warrier@linux.vnet.ibm.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      e3c13e56
  2. 09 Sep, 2016 9 commits
    • Suresh Warrier's avatar
      KVM: PPC: Book3S HV: Enable IRQ bypass · c57875f5
      Suresh Warrier authored
      Add the irq_bypass_add_producer and irq_bypass_del_producer
      functions. These functions get called whenever a GSI is being
      defined for a guest. They create/remove the mapping between
      host real IRQ numbers and the guest GSI.
      
      Add the following helper functions to manage the
      passthrough IRQ map.
      
      kvmppc_set_passthru_irq()
        Creates a mapping in the passthrough IRQ map that maps a host
        IRQ to a guest GSI. It allocates the structure (one per guest VM)
        the first time it is called.
      
      kvmppc_clr_passthru_irq()
        Removes the passthrough IRQ map entry given a guest GSI.
        The passthrough IRQ map structure is not freed even when the
        number of mapped entries goes to zero. It is only freed when
        the VM is destroyed.
      
      [paulus@ozlabs.org - modified to use is_pnv_opal_msi() rather than
       requiring all passed-through interrupts to use the same irq_chip;
       changed deletion so it zeroes out the r_hwirq field rather than
       copying the last entry down and decrementing the number of entries.]
      Signed-off-by: default avatarSuresh Warrier <warrier@linux.vnet.ibm.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      c57875f5
    • Suresh Warrier's avatar
      KVM: PPC: Book3S HV: Introduce kvmppc_passthru_irqmap · 8daaafc8
      Suresh Warrier authored
      This patch introduces an IRQ mapping structure, the
      kvmppc_passthru_irqmap structure that is to be used
      to map the real hardware IRQ in the host with the virtual
      hardware IRQ (gsi) that is injected into a guest by KVM for
      passthrough adapters.
      
      Currently, we assume a separate IRQ mapping structure for
      each guest. Each kvmppc_passthru_irqmap has a mapping arrays,
      containing all defined real<->virtual IRQs.
      
      [paulus@ozlabs.org - removed irq_chip field from struct
       kvmppc_passthru_irqmap; changed parameter for
       kvmppc_get_passthru_irqmap from struct kvm_vcpu * to struct
       kvm *, removed small cached array.]
      Signed-off-by: default avatarSuresh Warrier <warrier@linux.vnet.ibm.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      8daaafc8
    • Suresh Warrier's avatar
      KVM: PPC: select IRQ_BYPASS_MANAGER · 9576730d
      Suresh Warrier authored
      Select IRQ_BYPASS_MANAGER for PPC when CONFIG_KVM is set.
      Add the PPC producer functions for add and del producer.
      
      [paulus@ozlabs.org - Moved new functions from book3s.c to powerpc.c
       so booke compiles; added kvm_arch_has_irq_bypass implementation.]
      Signed-off-by: default avatarSuresh Warrier <warrier@linux.vnet.ibm.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      9576730d
    • Suresh Warrier's avatar
      KVM: PPC: Book3S HV: Convert kvmppc_read_intr to a C function · 37f55d30
      Suresh Warrier authored
      Modify kvmppc_read_intr to make it a C function.  Because it is called
      from kvmppc_check_wake_reason, any of the assembler code that calls
      either kvmppc_read_intr or kvmppc_check_wake_reason now has to assume
      that the volatile registers might have been modified.
      
      This also adds in the optimization of clearing saved_xirr in the case
      where we completely handle and EOI an IPI.  Without this, the next
      device interrupt will require two trips through the host interrupt
      handling code.
      
      [paulus@ozlabs.org - made kvmppc_check_wake_reason create a stack frame
       when it is calling kvmppc_read_intr, which means we can set r12 to
       the trap number (0x500) after the call to kvmppc_read_intr, instead
       of using r31.  Also moved the deliver_guest_interrupt label so as to
       restore XER and CTR, plus other minor tweaks.]
      Signed-off-by: default avatarSuresh Warrier <warrier@linux.vnet.ibm.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      37f55d30
    • Paul Mackerras's avatar
      Merge branch 'kvm-ppc-infrastructure' into kvm-ppc-next · 99212c86
      Paul Mackerras authored
      This merges the topic branch 'kvm-ppc-infrastructure' into kvm-ppc-next
      so that I can then apply further patches that need the changes in the
      kvm-ppc-infrastructure branch.
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      99212c86
    • Paolo Bonzini's avatar
      powerpc: move hmi.c to arch/powerpc/kvm/ · 3f257774
      Paolo Bonzini authored
      hmi.c functions are unused unless sibling_subcore_state is nonzero, and
      that in turn happens only if KVM is in use.  So move the code to
      arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_HV_POSSIBLE
      rather than CONFIG_PPC_BOOK3S_64.  The sibling_subcore_state is also
      included in struct paca_struct only if KVM is supported by the kernel.
      
      Cc: Daniel Axtens <dja@axtens.net>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: linuxppc-dev@lists.ozlabs.org
      Cc: kvm-ppc@vger.kernel.org
      Cc: kvm@vger.kernel.org
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      3f257774
    • Suresh Warrier's avatar
      powerpc/powernv: Provide facilities for EOI, usable from real mode · 4ee11c1a
      Suresh Warrier authored
      This adds a new function pnv_opal_pci_msi_eoi() which does the part of
      end-of-interrupt (EOI) handling of an MSI which involves doing an
      OPAL call.  This function can be called in real mode.  This doesn't
      just export pnv_ioda2_msi_eoi() because that does a call to
      icp_native_eoi(), which does not work in real mode.
      
      This also adds a function, is_pnv_opal_msi(), which KVM can call to
      check whether an interrupt is one for which we should be calling
      pnv_opal_pci_msi_eoi() when we need to do an EOI.
      
      [paulus@ozlabs.org - split out the addition of pnv_opal_pci_msi_eoi()
       from Suresh's patch "KVM: PPC: Book3S HV: Handle passthrough
       interrupts in guest"; added is_pnv_opal_msi(); wrote description.]
      Signed-off-by: default avatarSuresh Warrier <warrier@linux.vnet.ibm.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      4ee11c1a
    • Suresh Warrier's avatar
      powerpc: Add simple cache inhibited MMIO accessors · 07b1fdf5
      Suresh Warrier authored
      Add simple cache inhibited accessors for memory mapped I/O.
      Unlike the accessors built from the DEF_MMIO_* macros, these
      don't include any hardware memory barriers, callers need to
      manage memory barriers on their own. These can only be called
      in hypervisor real mode.
      Signed-off-by: default avatarSuresh Warrier <warrier@linux.vnet.ibm.com>
      [paulus@ozlabs.org - added line to comment]
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      07b1fdf5
    • Paul Mackerras's avatar
      powerpc/mm: Speed up computation of base and actual page size for a HPTE · 0eeede0c
      Paul Mackerras authored
      This replaces a 2-D search through an array with a simple 8-bit table
      lookup for determining the actual and/or base page size for a HPT entry.
      
      The encoding in the second doubleword of the HPTE is designed to encode
      the actual and base page sizes without using any more bits than would be
      needed for a 4k page number, by using between 1 and 8 low-order bits of
      the RPN (real page number) field to encode the page sizes.  A single
      "large page" bit in the first doubleword indicates that these low-order
      bits are to be interpreted like this.
      
      We can determine the page sizes by using the low-order 8 bits of the RPN
      to look up a 256-entry table.  For actual page sizes less than 1MB, some
      of the upper bits of these 8 bits are going to be real address bits, but
      we can cope with that by replicating the entries for those smaller page
      sizes.
      
      While we're at it, let's move the hpte_page_size() and hpte_base_page_size()
      functions from a KVM-specific header to a header for 64-bit HPT systems,
      since this computation doesn't have anything specifically to do with KVM.
      Reviewed-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      0eeede0c
  3. 08 Sep, 2016 5 commits
    • Suraj Jitindar Singh's avatar
      KVM: PPC: Implement existing and add new halt polling vcpu stats · 2a27f514
      Suraj Jitindar Singh authored
      vcpu stats are used to collect information about a vcpu which can be viewed
      in the debugfs. For example halt_attempted_poll and halt_successful_poll
      are used to keep track of the number of times the vcpu attempts to and
      successfully polls. These stats are currently not used on powerpc.
      
      Implement incrementation of the halt_attempted_poll and
      halt_successful_poll vcpu stats for powerpc. Since these stats are summed
      over all the vcpus for all running guests it doesn't matter which vcpu
      they are attributed to, thus we choose the current runner vcpu of the
      vcore.
      
      Also add new vcpu stats: halt_poll_success_ns, halt_poll_fail_ns and
      halt_wait_ns to be used to accumulate the total time spend polling
      successfully, polling unsuccessfully and waiting respectively, and
      halt_successful_wait to accumulate the number of times the vcpu waits.
      Given that halt_poll_success_ns, halt_poll_fail_ns and halt_wait_ns are
      expressed in nanoseconds it is necessary to represent these as 64-bit
      quantities, otherwise they would overflow after only about 4 seconds.
      
      Given that the total time spend either polling or waiting will be known and
      the number of times that each was done, it will be possible to determine
      the average poll and wait times. This will give the ability to tune the kvm
      module parameters based on the calculated average wait and poll times.
      Signed-off-by: default avatarSuraj Jitindar Singh <sjitindarsingh@gmail.com>
      Reviewed-by: default avatarDavid Matlack <dmatlack@google.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      2a27f514
    • Suraj Jitindar Singh's avatar
      KVM: Add provisioning for ulong vm stats and u64 vcpu stats · 8a7e75d4
      Suraj Jitindar Singh authored
      vms and vcpus have statistics associated with them which can be viewed
      within the debugfs. Currently it is assumed within the vcpu_stat_get() and
      vm_stat_get() functions that all of these statistics are represented as
      u32s, however the next patch adds some u64 vcpu statistics.
      
      Change all vcpu statistics to u64 and modify vcpu_stat_get() accordingly.
      Since vcpu statistics are per vcpu, they will only be updated by a single
      vcpu at a time so this shouldn't present a problem on 32-bit machines
      which can't atomically increment 64-bit numbers. However vm statistics
      could potentially be updated by multiple vcpus from that vm at a time.
      To avoid the overhead of atomics make all vm statistics ulong such that
      they are 64-bit on 64-bit systems where they can be atomically incremented
      and are 32-bit on 32-bit systems which may not be able to atomically
      increment 64-bit numbers. Modify vm_stat_get() to expect ulongs.
      Signed-off-by: default avatarSuraj Jitindar Singh <sjitindarsingh@gmail.com>
      Reviewed-by: default avatarDavid Matlack <dmatlack@google.com>
      Acked-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      8a7e75d4
    • Suraj Jitindar Singh's avatar
      KVM: PPC: Book3S HV: Implement halt polling · 0cda69dd
      Suraj Jitindar Singh authored
      This patch introduces new halt polling functionality into the kvm_hv kernel
      module. When a vcore is idle it will poll for some period of time before
      scheduling itself out.
      
      When all of the runnable vcpus on a vcore have ceded (and thus the vcore is
      idle) we schedule ourselves out to allow something else to run. In the
      event that we need to wake up very quickly (for example an interrupt
      arrives), we are required to wait until we get scheduled again.
      
      Implement halt polling so that when a vcore is idle, and before scheduling
      ourselves, we poll for vcpus in the runnable_threads list which have
      pending exceptions or which leave the ceded state. If we poll successfully
      then we can get back into the guest very quickly without ever scheduling
      ourselves, otherwise we schedule ourselves out as before.
      
      There exists generic halt_polling code in virt/kvm_main.c, however on
      powerpc the polling conditions are different to the generic case. It would
      be nice if we could just implement an arch specific kvm_check_block()
      function, but there is still other arch specific things which need to be
      done for kvm_hv (for example manipulating vcore states) which means that a
      separate implementation is the best option.
      
      Testing of this patch with a TCP round robin test between two guests with
      virtio network interfaces has found a decrease in round trip time of ~15us
      on average. A performance gain is only seen when going out of and
      back into the guest often and quickly, otherwise there is no net benefit
      from the polling. The polling interval is adjusted such that when we are
      often scheduled out for long periods of time it is reduced, and when we
      often poll successfully it is increased. The rate at which the polling
      interval increases or decreases, and the maximum polling interval, can
      be set through module parameters.
      
      Based on the implementation in the generic kvm module by Wanpeng Li and
      Paolo Bonzini, and on direction from Paul Mackerras.
      Signed-off-by: default avatarSuraj Jitindar Singh <sjitindarsingh@gmail.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      0cda69dd
    • Suraj Jitindar Singh's avatar
      KVM: PPC: Book3S HV: Change vcore element runnable_threads from linked-list to array · 7b5f8272
      Suraj Jitindar Singh authored
      The struct kvmppc_vcore is a structure used to store various information
      about a virtual core for a kvm guest. The runnable_threads element of the
      struct provides a list of all of the currently runnable vcpus on the core
      (those in the KVMPPC_VCPU_RUNNABLE state). The previous implementation of
      this list was a linked_list. The next patch requires that the list be able
      to be iterated over without holding the vcore lock.
      
      Reimplement the runnable_threads list in the kvmppc_vcore struct as an
      array. Implement function to iterate over valid entries in the array and
      update access sites accordingly.
      Signed-off-by: default avatarSuraj Jitindar Singh <sjitindarsingh@gmail.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      7b5f8272
    • Suraj Jitindar Singh's avatar
      KVM: PPC: Book3S HV: Move struct kvmppc_vcore from kvm_host.h to kvm_book3s.h · e64fb7e2
      Suraj Jitindar Singh authored
      The next commit will introduce a member to the kvmppc_vcore struct which
      references MAX_SMT_THREADS which is defined in kvm_book3s_asm.h, however
      this file isn't included in kvm_host.h directly. Thus compiling for
      certain platforms such as pmac32_defconfig and ppc64e_defconfig with KVM
      fails due to MAX_SMT_THREADS not being defined.
      
      Move the struct kvmppc_vcore definition to kvm_book3s.h which explicitly
      includes kvm_book3s_asm.h.
      Signed-off-by: default avatarSuraj Jitindar Singh <sjitindarsingh@gmail.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      e64fb7e2
  4. 25 Aug, 2016 1 commit
    • Paul Mackerras's avatar
      KVM: PPC: Always select KVM_VFIO, plus Makefile cleanup · 4b3d173d
      Paul Mackerras authored
      As discussed recently on the kvm mailing list, David Gibson's
      intention in commit 178a7875 ("vfio: Enable VFIO device for
      powerpc", 2016-02-01) was to have the KVM VFIO device built in
      on all powerpc platforms.  This patch adds the "select KVM_VFIO"
      statement that makes this happen.
      
      Currently, arch/powerpc/kvm/Makefile doesn't include vfio.o for
      the 64-bit kvm module, because the list of objects doesn't use
      the $(common-objs-y) list.  The reason it doesn't is because we
      don't necessarily want coalesced_mmio.o or emulate.o (for example
      if HV KVM is the only target), and common-objs-y includes both.
      
      Since this is confusing, this patch adjusts the definitions so that
      we now use $(common-objs-y) in the list for the 64-bit kvm.ko
      module, emulate.o is removed from common-objs-y and added in the
      places that need it, and the inclusion of coalesced_mmio.o now
      depends on CONFIG_KVM_MMIO.
      Reviewed-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Reviewed-by: default avatarDavid Gibson <david@gibson.dropbear.id.au>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      4b3d173d
  5. 19 Aug, 2016 2 commits
    • Paul Mackerras's avatar
      KVM: PPC: Implement kvm_arch_intc_initialized() for PPC · 34a75b0f
      Paul Mackerras authored
      It doesn't make sense to create irqfds for a VM that doesn't have
      in-kernel interrupt controller emulation.  There is an existing
      interface for architecture code to tell the irqfd code whether or
      not any interrupt controller has been initialized, called
      kvm_arch_intc_initialized(), so let's implement that for powerpc.
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      34a75b0f
    • Paul Mackerras's avatar
      KVM: PPC: Book3S: Don't crash if irqfd used with no in-kernel XICS emulation · e48ba1cb
      Paul Mackerras authored
      It turns out that if userspace creates a pseries-type VM without
      in-kernel XICS (interrupt controller) emulation, and then connects
      an eventfd to the VM as an irqfd, and the eventfd gets signalled,
      that the code will try to deliver an interrupt via the non-existent
      XICS object and crash the host kernel with a NULL pointer dereference.
      
      To fix this, we check for the presence of the XICS object before
      trying to deliver the interrupt, and return with an error if not.
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      e48ba1cb
  6. 15 Aug, 2016 3 commits
  7. 14 Aug, 2016 2 commits
    • Linus Torvalds's avatar
      Merge tag 'fixes-for-linus-4.8' of... · 118253a5
      Linus Torvalds authored
      Merge tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
      
      Pull h8300 and unicore32 architecture fixes from Guenter Roeck:
       "Two patches to fix h8300 and unicore32 builds.
      
        unicore32 builds have been broken since v4.6.  The fix has been
        available in -next since March of this year.
      
        h8300 builds have been broken since the last commit window.  The fix
        has been available in -next since June of this year"
      
      * tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
        h8300: Add missing include file to asm/io.h
        unicore32: mm: Add missing parameter to arch_vma_access_permitted
      118253a5
    • Linus Torvalds's avatar
      Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux · 120c5475
      Linus Torvalds authored
      Pull arm64 fixes from Catalin Marinas:
      
       - support for nr_cpus= command line argument (maxcpus was previously
         changed to allow secondary CPUs to be hot-plugged)
      
       - ARM PMU interrupt handling fix
      
       - fix potential TLB conflict in the hibernate code
      
       - improved handling of EL1 instruction aborts (better error reporting)
      
       - removal of useless jprobes code for stack saving/restoring
      
       - defconfig updates
      
      * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
        arm64: defconfig: enable CONFIG_LOCALVERSION_AUTO
        arm64: defconfig: add options for virtualization and containers
        arm64: hibernate: handle allocation failures
        arm64: hibernate: avoid potential TLB conflict
        arm64: Handle el1 synchronous instruction aborts cleanly
        arm64: Remove stack duplicating code from jprobes
        drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property
        drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlock
        arm64: Support hard limit of cpu count by nr_cpus
      120c5475
  8. 13 Aug, 2016 4 commits
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 329f4152
      Linus Torvalds authored
      Pull KVM fixes from Radim Krčmář:
       "KVM:
         - lock kvm_device list to prevent corruption on device creation.
      
        PPC:
         - split debugfs initialization from creation of the xics device to
           unlock the newly taken kvm lock earlier.
      
        s390:
         - prevent userspace from triggering two WARN_ON_ONCE.
      
        MIPS:
         - fix several issues in the management of TLB faults (Cc: stable)"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
        MIPS: KVM: Propagate kseg0/mapped tlb fault errors
        MIPS: KVM: Fix gfn range check in kseg0 tlb faults
        MIPS: KVM: Add missing gfn range check
        MIPS: KVM: Fix mapped fault broken commpage handling
        KVM: Protect device ops->create and list_add with kvm->lock
        KVM: PPC: Move xics_debugfs_init out of create
        KVM: s390: reset KVM_REQ_MMU_RELOAD if mapping the prefix failed
        KVM: s390: set the prefix initially properly
      329f4152
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · a1e21033
      Linus Torvalds authored
      Pull block fixes from Jens Axboe:
      
       - an NVMe fix from Gabriel, fixing a suspend/resume issue on some
         setups
      
       - addition of a few missing entries in the block queue sysfs
         documentation, from Joe
      
       - a fix for a sparse shadow warning for the bvec iterator, from
         Johannes
      
       - a writeback deadlock involving raid issuing barriers, and not
         flushing the plug when we wakeup the flusher threads.  From
         Konstantin
      
       - a set of patches for the NVMe target/loop/rdma code, from Roland and
         Sagi
      
      * 'for-linus' of git://git.kernel.dk/linux-block:
        bvec: avoid variable shadowing warning
        doc: update block/queue-sysfs.txt entries
        nvme: Suspend all queues before deletion
        mm, writeback: flush plugged IO in wakeup_flusher_threads()
        nvme-rdma: Remove unused includes
        nvme-rdma: start async event handler after reconnecting to a controller
        nvmet: Fix controller serial number inconsistency
        nvmet-rdma: Don't use the inline buffer in order to avoid allocation for small reads
        nvmet-rdma: Correctly handle RDMA device hot removal
        nvme-rdma: Make sure to shutdown the controller if we can
        nvme-loop: Remove duplicate call to nvme_remove_namespaces
        nvme-rdma: Free the I/O tags when we delete the controller
        nvme-rdma: Remove duplicate call to nvme_remove_namespaces
        nvme-rdma: Fix device removal handling
        nvme-rdma: Queue ns scanning after a sucessful reconnection
        nvme-rdma: Don't leak uninitialized memory in connect request private data
      a1e21033
    • Guenter Roeck's avatar
      h8300: Add missing include file to asm/io.h · 2b05980d
      Guenter Roeck authored
      h8300 builds fail with
      
      arch/h8300/include/asm/io.h:9:15: error: unknown type name ‘u8’
      arch/h8300/include/asm/io.h:15:15: error: unknown type name ‘u16’
      arch/h8300/include/asm/io.h:21:15: error: unknown type name ‘u32’
      
      and many related errors.
      
      Fixes: 23c82d41bdf4 ("kexec-allow-architectures-to-override-boot-mapping-fix")
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      2b05980d
    • Guenter Roeck's avatar
      unicore32: mm: Add missing parameter to arch_vma_access_permitted · 783011b1
      Guenter Roeck authored
      unicore32 fails to compile with the following errors.
      
      mm/memory.c: In function ‘__handle_mm_fault’:
      mm/memory.c:3381: error:
      	too many arguments to function ‘arch_vma_access_permitted’
      mm/gup.c: In function ‘check_vma_flags’:
      mm/gup.c:456: error:
      	too many arguments to function ‘arch_vma_access_permitted’
      mm/gup.c: In function ‘vma_permits_fault’:
      mm/gup.c:640: error:
      	too many arguments to function ‘arch_vma_access_permitted’
      
      Fixes: d61172b4 ("mm/core, x86/mm/pkeys: Differentiate instruction fetches")
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Acked-by: default avatarGuan Xuetao <gxt@mprc.pku.edu.cn>
      783011b1
  9. 12 Aug, 2016 13 commits