This patch allows to compress mmap files. E.g., for so files.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

As marcosfrm reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=213089

Initramfs generators rely on "pre" softdeps (and "depends") to include
additional required modules.

F2FS does not declare "pre: crc32" softdep. Then every generator (dracut,
mkinitcpio...) has to maintain a hardcoded list for this purpose.

Hence let's use MODULE_SOFTDEP("pre: crc32") in f2fs code.

Fixes: 43b6573b ("f2fs: use cryptoapi crc32 functions")
Reported-by: marcosfrm <marcosfrm@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Static analysis reports this problem
file.c:3206:2: warning: Undefined or garbage value returned to caller
        return err;
        ^~~~~~~~~~

err is only set if there is some work to do.  Because the loop returns
immediately on an error, if all the work was done, a 0 would be returned.
Instead of checking the unlikely case that there was no work to do,
change the return of err to 0.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Previously, in order to reuse __f2fs_cluster_blocks(),
f2fs_is_compressed_cluster() assigned a compress_ctx type variable,
which is used to pass few parameters (cc.inode, cc.cluster_size,
cc.cluster_idx), it's wasteful to allocate such large space in stack.

Let's clean up parameters of __f2fs_cluster_blocks() to avoid that.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

If we don't initialize dn.inode_page for f2fs_get_block(),
f2fs_get_block() will call f2fs_put_dnode() itself, so let's
remove unneeded f2fs_put_dnode() in f2fs_vm_page_mkwrite().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Default age threshold value is missed to set, fix it.

Fixes: 093749e2 ("f2fs: support age threshold based garbage collection")
Reported-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

The kernel writes to swap files on f2fs directly without the assistance
of the filesystem. This direct write by kernel can be non-sequential
even when the f2fs is in LFS mode. Such non-sequential write conflicts
with the LFS semantics. Especially when f2fs is set up on zoned block
devices, the non-sequential write causes unaligned write command errors.

To avoid the non-sequential writes to swap files, prevent swap file
activation when the filesystem is in LFS mode.

Fixes: 4969c06a ("f2fs: support swap file w/ DIO")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

As syzbot reported, there is an use-after-free issue during f2fs recovery:

Use-after-free write at 0xffff88823bc16040 (in kfence-#10):
 kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486
 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869
 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945
 mount_bdev+0x26c/0x3a0 fs/super.c:1367
 legacy_get_tree+0xea/0x180 fs/fs_context.c:592
 vfs_get_tree+0x86/0x270 fs/super.c:1497
 do_new_mount fs/namespace.c:2905 [inline]
 path_mount+0x196f/0x2be0 fs/namespace.c:3235
 do_mount fs/namespace.c:3248 [inline]
 __do_sys_mount fs/namespace.c:3456 [inline]
 __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The root cause is multi f2fs filesystem instances can race on accessing
global fsync_entry_slab pointer, result in use-after-free issue of slab
cache, fixes to init/destroy this slab cache only once during module
init/destroy procedure to avoid this issue.

Reported-by: syzbot+9d90dad32dd9727ed084@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Restruct f2fs page private layout for below reasons:

There are some cases that f2fs wants to set a flag in a page to
indicate a specified status of page:
a) page is in transaction list for atomic write
b) page contains dummy data for aligned write
c) page is migrating for GC
d) page contains inline data for inline inode flush
e) page belongs to merkle tree, and is verified for fsverity
f) page is dirty and has filesystem/inode reference count for writeback
g) page is temporary and has decompress io context reference for compression

There are existed places in page structure we can use to store
f2fs private status/data:
- page.flags: PG_checked, PG_private
- page.private

However it was a mess when we using them, which may cause potential
confliction:
		page.private	PG_private	PG_checked	page._refcount (+1 at most)
a)		-1		set				+1
b)		-2		set
c), d), e)					set
f)		0		set				+1
g)		pointer		set

The other problem is page.flags has no free slot, if we can avoid set
zero to page.private and set PG_private flag, then we use non-zero value
to indicate PG_private status, so that we may have chance to reclaim
PG_private slot for other usage. [1]

The other concern is f2fs has bad scalability in aspect of indicating
more page status.

So in this patch, let's restructure f2fs' page.private as below to
solve above issues:

Layout A: lowest bit should be 1
| bit0 = 1 | bit1 | bit2 | ... | bit MAX | private data .... |
 bit 0	PAGE_PRIVATE_NOT_POINTER
 bit 1	PAGE_PRIVATE_ATOMIC_WRITE
 bit 2	PAGE_PRIVATE_DUMMY_WRITE
 bit 3	PAGE_PRIVATE_ONGOING_MIGRATION
 bit 4	PAGE_PRIVATE_INLINE_INODE
 bit 5	PAGE_PRIVATE_REF_RESOURCE
 bit 6-	f2fs private data

Layout B: lowest bit should be 0
 page.private is a wrapped pointer.

After the change:
		page.private	PG_private	PG_checked	page._refcount (+1 at most)
a)		11		set				+1
b)		101		set				+1
c)		1001		set				+1
d)		10001		set				+1
e)						set
f)		100001		set				+1
g)		pointer		set				+1

[1] https://lore.kernel.org/linux-f2fs-devel/20210422154705.GO3596236@casper.infradead.org/T/#u

Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch adds cp_error check in f2fs_write_compressed_pages() like we did
in f2fs_write_single_data_page()
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch renames __cluster_may_compress() to cluster_has_invalid_data() for
better readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Pull arm64 fixes from Catalin Marinas:
 "Fixes and cpucaps.h automatic generation:

   - Generate cpucaps.h at build time rather than carrying lots of
     #defines. Merged at -rc1 to avoid some conflicts during the merge
     window.

   - Initialise RGSR_EL1.SEED in __cpu_setup() as it may be left as 0
     out of reset and the IRG instruction would not function as expected
     if only the architected pseudorandom number generator is
     implemented.

   - Fix potential race condition in __sync_icache_dcache() where the
     PG_dcache_clean page flag is set before the actual cache
     maintenance.

   - Fix header include in BTI kselftests"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
  arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.h
  arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup
  kselftest/arm64: Add missing stddef.h include to BTI tests
  arm64: Generate cpucaps.h

Pull f2fs fixes from Jaegeuk Kim:
 "This fixes some critical bugs such as memory leak in compression
  flows, kernel panic when handling errors, and swapon failure due to
  newly added condition check"

* tag 'f2fs-5.13-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: return EINVAL for hole cases in swap file
  f2fs: avoid swapon failure by giving a warning first
  f2fs: compress: fix to assign cc.cluster_idx correctly
  f2fs: compress: fix race condition of overwrite vs truncate
  f2fs: compress: fix to free compress page correctly
  f2fs: support iflag change given the mask
  f2fs: avoid null pointer access when handling IPU error

Pull drm fixes from Dave Airlie:
 "Not much here, mostly amdgpu fixes, with a couple of radeon, and a
  cosmetic vc4.

  Two MAINTAINERS file updates also.

  amdgpu:
   - Fixes for flexible array conversions
   - Fix sysfs attribute init
   - Harvesting fixes
   - VCN CG/PG fixes for Picasso

  radeon:
   - Fixes for flexible array conversions
   - Fix for flickering on Oland with multiple 4K displays

  vc4:
   - drop unused function"

* tag 'drm-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: update vcn1.0 Non-DPG suspend sequence
  drm/amdgpu: set vcn mgcg flag for picasso
  drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
  drm/amdgpu: update the method for harvest IP for specific SKU
  drm/amdgpu: add judgement when add ip blocks (v2)
  drm/amd/display: Initialize attribute for hdcp_srm sysfs file
  drm/amd/pm: Fix out-of-bounds bug
  drm/radeon/si_dpm: Fix SMU power state load
  drm/radeon/ni_dpm: Fix booting bug
  MAINTAINERS: Update address for Emma Anholt
  MAINTAINERS: Update my e-mail
  drm/vc4: remove unused function
  drm/ttm: Do not add non-system domain BO into swap list

To ensure that instructions are observable in a new mapping, the arm64
set_pte_at() implementation cleans the D-cache and invalidates the
I-cache to the PoU. As an optimisation, this is only done on executable
mappings and the PG_dcache_clean page flag is set to avoid future cache
maintenance on the same page.

When two different processes map the same page (e.g. private executable
file or shared mapping) there's a potential race on checking and setting
PG_dcache_clean via set_pte_at() -> __sync_icache_dcache(). While on the
fault paths the page is locked (PG_locked), mprotect() does not take the
page lock. The result is that one process may see the PG_dcache_clean
flag set but the I/D cache maintenance not yet performed.

Avoid test_and_set_bit(PG_dcache_clean) in favour of separate test_bit()
and set_bit(). In the rare event of a race, the cache maintenance is
done twice.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210514095001.13236-1-catalin.marinas@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'amd-drm-fixes-5.13-2021-05-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.13-2021-05-13:

amdgpu:
- Fixes for flexible array conversions
- Fix sysfs attribute init
- Harvesting fixes
- VCN CG/PG fixes for Picasso

radeon:
- Fixes for flexible array conversions
- Fix for flickering on Oland with multiple 4K displays
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513163228.3963-1-alexander.deucher@amd.com

Remove an unused function and a MAINTAINERS update.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513133617.xq77wwrehpuh7yn2@hendrix

Pull power management fixes from Rafael Wysocki:
 "These close a coverage gap in the intel_pstate driver and fix runtime
  PM child count imbalance related to interactions with system-wide
  suspend.

  Specifics:

   - Make intel_pstate work as expected on systems where the platform
     firmware enables HWP even though the HWP EPP support is not
     advertised (Rafael Wysocki).

   - Fix possible runtime PM child count imbalance that may occur if
     other runtime PM functions are called after invoking
     pm_runtime_force_suspend() and before pm_runtime_force_resume()
     is called (Tony Lindgren)"

* tag 'pm-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: runtime: Fix unpaired parent child_count for force_resume
  cpufreq: intel_pstate: Use HWP if enabled by platform firmware

Pull ACPI fixes from Rafael Wysocki:
 "These revert an unnecessary revert of an ACPI power management commit,
  add a missing device ID to one of the lists and fix a possible memory
  leak in an error path.

  Specifics:

   - Revert a revert of a recent ACPI power management change that does
     not need to be reverted after all (Rafael Wysocki).

   - Add missing fan device ID to the list of device IDs for which the
     devices should not be put into the ACPI PM domain (Sumeet
     Pawnikar).

   - Fix possible memory leak in an error path in the ACPI device
     enumeration code (Christophe JAILLET)"

* tag 'acpi-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Add ACPI ID of Alder Lake Fan
  ACPI: scan: Fix a memory leak in an error handling path
  Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""

* acpi-pm:
  ACPI: PM: Add ACPI ID of Alder Lake Fan
  Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""

* pm-core:
  PM: runtime: Fix unpaired parent child_count for force_resume

Merge VT_RESIZEX fixes from Maciej Rozycki:
 "I got to the bottom of the issue with VT_RESIZEX recently discussed
  and came up with this small patch series, fixing an additional issue
  that I originally thought might be broken VGA hardware emulation with
  my laptop, which however turned out to be intertwined with the
  original problem and also a regression introduced somewhat later.

  The fix for that because the first patch, and then to make backporting
  feasible I had to put a revert of the offending change from last
  September next, followed by a proper fix for the framebuffer issue
  that change had tried to address.

  See individual change descriptions for details.

  These have been verified with true VGA hardware (a Trident TVGA8900
  ISA video adapter) using various combinations of `svgatextmode' and
  `setfont' command invocations to change both the VT size and the font
  size, and also switching between the text console and X11, both by
  starting/stopping the X server and by switching between VTs.

  All this to ensure bringing the behaviour of VGA text console back to
  correct operation as it used to be with Linux 2.6.18"

* emailed patches from Maciej W. Rozycki <macro@orcam.me.uk>:
  vt: Fix character height handling with VT_RESIZEX
  vt_ioctl: Revert VT_RESIZEX parameter handling removal
  vgacon: Record video mode changes with VT_RESIZEX

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.

For framebuffer devices the two values are always the same, because the
former is inferred from the latter one.  For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator.  One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within.  Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763 ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):

 "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
  for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
  larger than actual font height calculated by con_font_set() from
  ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
  minimal amount of memory based on actual font height calculated by
  con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
  data."

The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:

 		if (clin)
-			video_font_height = clin;
+			vc->vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable.  Use "cell" in the new struct member then to avoid ambiguity.

References:

[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert the removal of code handling extra VT_RESIZEX ioctl's parameters
beyond those that VT_RESIZE supports, fixing a functional regression
causing `svgatextmode' not to resize the VT anymore.

As a consequence of the reverted change when the video adapter is
reprogrammed from the original say 80x25 text mode using a 9x16
character cell (720x400 pixel resolution) to say 80x37 text mode and the
same character cell (720x592 pixel resolution), the VT geometry does not
get updated and only upper two thirds of the screen are used for the VT,
and the lower part remains blank.  The proportions change according to
text mode geometries chosen.

Revert the change verbatim then, bringing back previous VT resizing.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 988d0763 ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl.  As it stands in that case the original
screen geometry continues being used to validate further VT resizing.

Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen.  Of course the
proportions change according to text mode geometries and font sizes
chosen.

Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: e400b6ec ("vt/vgacon: Check if screen resize request comes from userspace")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix bugs/regressions in adm9240, ltc2992, pmbus/fsp-3y, and occ
  drivers, plus a minor cleanup in the corsair-psu driver"

* tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (adm9240) Fix writes into inX_max attributes
  hwmon: (ltc2992) Put fwnode in error case during ->probe()
  hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E non-compliant vout encoding
  hwmon: (occ) Fix poll rate limiting
  hwmon: (corsair-psu) Remove unneeded semicolons

Anshuman suggested this.
Suggested-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210513151819.12526-1-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

update suspend register settings in Non-DPG mode.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

enable vcn mgcg flag for picasso.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue
doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and
another one is 4K 30Hz (pixelclock 297MHz).

The issue is gone after setting "power_dpm_force_performance_level" to
"high". Following the indication, we found that the issue occurs when
sclk is too low.

So resolve the issue by disabling sclk switching when there are two
monitors requires high pixelclock (> 297MHz).

v2:
 - Only apply the fix to Oland.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Update the method of disabling VCN IP for specific SKU for navi1x ASIC,
it will judge whether should add the related IP at the function of
amdgpu_device_ip_block_add().
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Judgement whether to add an sw ip according to the harvest info.

v2: fix indentation (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is stored in dynamically allocated memory, so sysfs_bin_attr_init() must
be called to initialize it. (Note: "initialization" only sets the .attr.key
member in this struct; it does not change the value of any other members.)

Otherwise, when CONFIG_DEBUG_LOCK_ALLOC=y this message appears during boot:

    BUG: key ffff9248900cd148 has not been registered!

Fixes: 9037246b ("drm/amd/display: Add sysfs interface for set/get srm")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1586Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: David Ward <david.ward@gatech.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct SISLANDS_SMC_SWSTATE doesn't allow for code that accesses
the first element of initialState.levels and ACPIState.levels
arrays:

drivers/gpu/drm/amd/pm/powerplay/si_dpm.c:
4820: table->initialState.levels[0].mclk.vDLL_CNTL =
4821:         cpu_to_be32(si_pi->clock_registers.dll_cntl);
...
5021: table->ACPIState.levels[0].mclk.vDLL_CNTL =
5022:         cpu_to_be32(dll_cntl);

because such element cannot be accessed without previously allocating
enough dynamic memory for it to exist (which never actually happens).
So, there is an out-of-bounds bug in this case.

That's why struct SISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 0e1aa13c ("drm/amd/pm: Replace one-element array with
flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of
dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Fixes: 0e1aa13c ("drm/amd/pm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct SISLANDS_SMC_SWSTATE doesn't allow for code that access
the first element of initialState.levels and ACPIState.levels
arrays:

4353         table->initialState.levels[0].mclk.vDLL_CNTL =
4354                 cpu_to_be32(si_pi->clock_registers.dll_cntl);
...
4555         table->ACPIState.levels[0].mclk.vDLL_CNTL =
4556                 cpu_to_be32(dll_cntl);

because such element cannot exist without previously allocating
any dynamic memory for it (which never actually happens).

That's why struct SISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 96e27e8d ("drm/radeon/si_dpm: Replace one-element array
with flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of
dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1583
Fixes: 96e27e8d ("drm/radeon/si_dpm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Create new structure NISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
NISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct NISLANDS_SMC_SWSTATE doesn't allow for code that access
the first element of initialState.levels and ACPIState.levels
arrays:

drivers/gpu/drm/radeon/ni_dpm.c:
1690         table->initialState.levels[0].mclk.vMPLL_AD_FUNC_CNTL =
1691                 cpu_to_be32(ni_pi->clock_registers.mpll_ad_func_cntl);
...
1903:   table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL = cpu_to_be32(mpll_ad_func_cntl);
1904:   table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL_2 = cpu_to_be32(mpll_ad_func_cntl_2);

because such element cannot exist without previously allocating
any dynamic memory for it (which never actually happens).

That's why struct NISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 434fb1e7 ("drm/radeon/nislands_smc.h: Replace one-element
array with flexible-array member in struct NISLANDS_SMC_SWSTATE"), the
size of dpmLevels in struct NISLANDS_SMC_STATETABLE should be fixed to
be NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Bug: https://lore.kernel.org/dri-devel/3eedbe78-1fbd-4763-a7f3-ac5665e76a4a@xenosoft.de/
Fixes: 434fb1e7 ("drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/dri-devel/9bb5fcbd-daf5-1669-b3e7-b8624b3c36f9@xenosoft.de/Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When converting the driver to use the devm_hwmon_device_register_with_info
API, the wrong register was selected when writing into inX_max attributes.
Fix it.

Fixes: 124b7e34 ("hwmon: (adm9240) Convert to devm_hwmon_device_register_with_info API")
Reported-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull documentation fixes from Jonathan Corbet:
 "A set of straightforward documentation fixes"

* tag 'docs-5.13-3' of git://git.lwn.net/linux:
  Remove link to nonexistent rocket driver docs
  docs: networking: device_drivers: fix bad usage of UTF-8 chars
  docs: hwmon: tmp103.rst: fix bad usage of UTF-8 chars
  docs: ABI: remove some spurious characters
  docs: ABI: remove a meaningless UTF-8 character
  docs: cdrom-standard.rst: get rid of uneeded UTF-8 chars
  Documentation: drop optional BOMs
  docs/zh_CN: Remove obsolete translation file

Merge tag 'tpmdd-next-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
 "Bug fixes that have came up after the first pull request"

* tag 'tpmdd-next-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: fix error return code in tpm2_get_cc_attrs_tbl()
  tpm, tpm_tis: Reserve locality in tpm_tis_resume()
  tpm, tpm_tis: Extend locality handling to TPM2 in tpm_tis_gen_interrupt()
  trusted-keys: match tpm_get_ops on all return paths
  KEYS: trusted: Fix memory leak on object td

If the total number of commands queried through TPM2_CAP_COMMANDS is
different from that queried through TPM2_CC_GET_CAPABILITY, it indicates
an unknown error. In this case, an appropriate error code -EFAULT should
be returned. However, we currently do not explicitly assign this error
code to 'rc'. As a result, 0 was incorrectly returned.

Cc: stable@vger.kernel.org
Fixes: 58472f5c("tpm: validate TPM 2.0 commands")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>