- 18 Apr, 2022 36 commits
-
-
Christoph Hellwig authored
Move all the logic to limit the discard bio size into a common helper so that it is better documented. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Coly Li <colyli@suse.de> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-23-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
No need to inline these fairly larger helpers. Also fix the return value to be unsigned, just like the field in struct queue_limits. Signed-off-by:
-
Christoph Hellwig authored
Use the bdev based alignment helper instead of open coding it. Signed-off-by:
-
Christoph Hellwig authored
Just use bdev_alignment_offset in disk_discard_alignment_show instead. That helpers is the same except for an always false branch that doesn't matter in this slow path. Signed-off-by:
-
Christoph Hellwig authored
No need to inline these fairly larger helpers. Signed-off-by:
-
Christoph Hellwig authored
This does the same as the open coded variant except for an extra branch, and allows to remove queue_alignment_offset entirely. Signed-off-by:
-
Christoph Hellwig authored
Replace the open coded offset calculation with the proper helper. This is an ABI change in that the -1 for a misaligned partition is properly propagated, which can be considered a bug fix and matches what is done on the whole device. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check the max supported sectors for zone append based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Christoph Hellwig authored
Add a helper to check the stable writes flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check the FUA flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check the write cache flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check the nonrot flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
-
Christoph Hellwig authored
Use the bdev based helper instead of poking into the queue. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
David Sterba <dsterba@suse.com> Reviewed-by:
-
Christoph Hellwig authored
Sanitize the calling conventions and use a goto label to cleanup the code flow. Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220415045258.199825-8-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
The bdev version does the right thing for partitions, so use that. Fixes: 9104d31a ("drbd: introduce WRITE_SAME support") Signed-off-by:
-
Christoph Hellwig authored
Use the bdev based limits helpers where they exist. Signed-off-by:
-
Christoph Hellwig authored
Fold each branch into its only caller. Signed-off-by:
-
Christoph Hellwig authored
Use the proper bdev_discard_alignment helper that accounts for partition offsets. Fixes: c66ac9db ("[SCSI] target: Add LIO target core v4.0.0-rc6") Signed-off-by:
-
Christoph Hellwig authored
The SCSI target drivers is a consumer of the block layer and shoul d generally work on struct block_device. Signed-off-by:
-
Christoph Hellwig authored
For block devices, the SCSI target drivers implements UNMAP as calls to blkdev_issue_discard, which does not guarantee zeroing just because Write Zeroes is supported. Note that this does not affect the file backed path which uses fallocate to punch holes. Fixes: 2237498f ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Signed-off-by:
-
Jan Kara authored
Bios queued into BFQ IO scheduler can be associated with a cgroup that was already offlined. This may then cause insertion of this bfq_group into a service tree. But this bfq_group will get freed as soon as last bio associated with it is completed leading to use after free issues for service tree users. Fix the problem by making sure we always operate on online bfq_group. If the bfq_group associated with the bio is not online, we pick the first online parent. CC: stable@vger.kernel.org Fixes: e21b7a0b ("block, bfq: add full hierarchical scheduling and cgroups support") Tested-by:
"yukuai (C)" <yukuai3@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
Jan Kara authored
BFQ usage of __bio_blkcg() is a relict from the past. Furthermore if bio would not be associated with any blkcg, the usage of __bio_blkcg() in BFQ is prone to races with the task being migrated between cgroups as __bio_blkcg() calls at different places could return different blkcgs. Convert BFQ to the new situation where bio->bi_blkg is initialized in bio_set_dev() and thus practically always valid. This allows us to save blkcg_gq lookup and noticeably simplify the code. CC: stable@vger.kernel.org Fixes: 0fe061b9 ("blkcg: fix ref count issue with bio_blkcg() using task_css") Tested-by:
-
Jan Kara authored
Track whether bfq_group is still online. We cannot rely on blkcg_gq->online because that gets cleared only after all policies are offlined and we need something that gets updated already under bfqd->lock when we are cleaning up our bfq_group to be able to guarantee that when we see online bfq_group, it will stay online while we are holding bfqd->lock lock. CC: stable@vger.kernel.org Tested-by:
-
Jan Kara authored
We call bfq_init_rq() from request merging functions where requests we get should have already gone through bfq_init_rq() during insert and anyway we want to do anything only if the request is already tracked by BFQ. So replace calls to bfq_init_rq() with RQ_BFQQ() instead to simply skip requests untracked by BFQ. We move bfq_init_rq() call in bfq_insert_request() a bit earlier to cover request merging and thus can transfer FIFO position in case of a merge. CC: stable@vger.kernel.org Tested-by:
-
Jan Kara authored
In bfq_insert_request() we unlock bfqd->lock only to call trace_block_rq_insert() and then lock bfqd->lock again. This is really pointless since tracing is disabled if we really care about performance and even if the tracepoint is enabled, it is a quick call. CC: stable@vger.kernel.org Tested-by:
-
Jan Kara authored
When the process is migrated to a different cgroup (or in case of writeback just starts submitting bios associated with a different cgroup) bfq_merge_bio() can operate with stale cgroup information in bic. Thus the bio can be merged to a request from a different cgroup or it can result in merging of bfqqs for different cgroups or bfqqs of already dead cgroups and causing possible use-after-free issues. Fix the problem by updating cgroup information in bfq_merge_bio(). CC: stable@vger.kernel.org Fixes: e21b7a0b ("block, bfq: add full hierarchical scheduling and cgroups support") Tested-by:
-
Jan Kara authored
When bfqq is shared by multiple processes it can happen that one of the processes gets moved to a different cgroup (or just starts submitting IO for different cgroup). In case that happens we need to split the merged bfqq as otherwise we will have IO for multiple cgroups in one bfqq and we will just account IO time to wrong entities etc. Similarly if the bfqq is scheduled to merge with another bfqq but the merge didn't happen yet, cancel the merge as it need not be valid anymore. CC: stable@vger.kernel.org Fixes: e21b7a0b ("block, bfq: add full hierarchical scheduling and cgroups support") Tested-by:
-
Jan Kara authored
It can happen that the parent of a bfqq changes between the moment we decide two queues are worth to merge (and set bic->stable_merge_bfqq) and the moment bfq_setup_merge() is called. This can happen e.g. because the process submitted IO for a different cgroup and thus bfqq got reparented. It can even happen that the bfqq we are merging with has parent cgroup that is already offline and going to be destroyed in which case the merge can lead to use-after-free issues such as: BUG: KASAN: use-after-free in __bfq_deactivate_entity+0x9cb/0xa50 Read of size 8 at addr ffff88800693c0c0 by task runc:[2:INIT]/10544 CPU: 0 PID: 10544 Comm: runc:[2:INIT] Tainted: G E 5.15.2-0.g5fb85fd-default #1 openSUSE Tumbleweed (unreleased) f1f3b891c72369aebecd2e43e4641a6358867c70 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x46/0x5a print_address_description.constprop.0+0x1f/0x140 ? __bfq_deactivate_entity+0x9cb/0xa50 kasan_report.cold+0x7f/0x11b ? __bfq_deactivate_entity+0x9cb/0xa50 __bfq_deactivate_entity+0x9cb/0xa50 ? update_curr+0x32f/0x5d0 bfq_deactivate_entity+0xa0/0x1d0 bfq_del_bfqq_busy+0x28a/0x420 ? resched_curr+0x116/0x1d0 ? bfq_requeue_bfqq+0x70/0x70 ? check_preempt_wakeup+0x52b/0xbc0 __bfq_bfqq_expire+0x1a2/0x270 bfq_bfqq_expire+0xd16/0x2160 ? try_to_wake_up+0x4ee/0x1260 ? bfq_end_wr_async_queues+0xe0/0xe0 ? _raw_write_unlock_bh+0x60/0x60 ? _raw_spin_lock_irq+0x81/0xe0 bfq_idle_slice_timer+0x109/0x280 ? bfq_dispatch_request+0x4870/0x4870 __hrtimer_run_queues+0x37d/0x700 ? enqueue_hrtimer+0x1b0/0x1b0 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_update_offsets_now+0x6f/0x280 hrtimer_interrupt+0x2c8/0x740 Fix the problem by checking that the parent of the two bfqqs we are merging in bfq_setup_merge() is the same. Link: https://lore.kernel.org/linux-block/20211125172809.GC19572@quack2.suse.cz/ CC: stable@vger.kernel.org Fixes: 430a67f9 ("block, bfq: merge bursts of newly-created queues") Tested-by:
-
Jan Kara authored
bfq_setup_cooperator() can mark bic as stably merged even though it decides to not merge its bfqqs (when bfq_setup_merge() returns NULL). Make sure to mark bic as stably merged only if we are really going to merge bfqqs. CC: stable@vger.kernel.org Tested-by:
-
Christoph Hellwig authored
Just initialize the bios on-demand. Signed-off-by:
-
Christoph Hellwig authored
Remove the magic autofree semantics and require the callers to explicitly call bio_init to initialize the bio. This allows bio_free to catch accidental bio_put calls on bio_init()ed bios as well. Signed-off-by:
Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Remove pscsi_get_bio and simplify the code flow in the only caller. Signed-off-by:
-
Christoph Hellwig authored
If a plain kmalloc that is not backed by a mempool is safe here for a large read (and the actual page allocations), it must also be for a small one, so simplify the code a bit. Signed-off-by:
Phillip Lougher <phillip@squashfs.org.uk> Reviewed-by:
-
Christoph Hellwig authored
Use and embedded bios that is initialized when used instead of bio_kmalloc plus bio_reset. Signed-off-by:
-
- 17 Apr, 2022 4 commits
-
-
Mike Snitzer authored
Refine per-cpu bio alloc cache interfaces so that DM and other block drivers can properly create and use the cache: DM uses bioset_init_from_src() to do its final bioset initialization, so must update bioset_init_from_src() to set BIOSET_PERCPU_CACHE if %src bioset has a cache. Also move bio_clear_polled() to include/linux/bio.h to allow users outside of block core. Signed-off-by:
-
Mike Snitzer authored
Replace the BIO_PERCPU_CACHE bio-internal flag with a REQ_ALLOC_CACHE one that can be passed to bio_alloc / bio_alloc_bioset, and implement the percpu cache allocation logic in a helper called from bio_alloc_bioset. This allows any bio_alloc_bioset user to use the percpu caches instead of having the functionality tied to struct kiocb. Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixlet from Juergen Gross: "A single cleanup patch for the Xen balloon driver" * tag 'for-linus-5.18-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: don't use PV mode extra memory for zone device allocations
-
