- 04 Mar, 2019 5 commits
-
-
Ioana Radulescu authored
We write different metadata information in the software annotation area of Tx frames, depending on frame type. Make this more explicit by introducing a type field and separate structures for single buffer and scatter-gather frames. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Toke Høiland-Jørgensen says: ==================== sched: Patches from out-of-tree version of sch_cake This series includes a couple of patches with updates from the out-of-tree version of sch_cake. The first one is a fix to the fairness scheduling when dual-mode fairness is enabled. The second patch is an additional feature flag that allows using fwmark as a tin selector, as a convenience for people who want to customise tin selection. The third patch is just a cleanup to the tin selection logic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toke Høiland-Jørgensen authored
With more modes added the logic in cake_select_tin() was getting a bit hairy, and it turns out we can actually simplify it quite a bit. This also allows us to get rid of one of the two diffserv parsing functions, which has the added benefit that already-zeroed DSCP fields won't get re-written. Suggested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kevin Darbyshire-Bryant authored
Add flag 'FWMARK' to enable use of firewall connmarks as tin selector. The connmark (skbuff->mark) needs to be in the range 1->tin_cnt ie. for diffserv3 the mark needs to be 1->3. Background Typically CAKE uses DSCP as the basis for tin selection. DSCP values are relatively easily changed as part of the egress path, usually with iptables & the mangle table, ingress is more challenging. CAKE is often used on the WAN interface of a residential gateway where passthrough of DSCP from the ISP is either missing or set to unhelpful values thus use of ingress DSCP values for tin selection isn't helpful in that environment. An approach to solving the ingress tin selection problem is to use CAKE's understanding of tc filters. Naive tc filters could match on source/destination port numbers and force tin selection that way, but multiple filters don't scale particularly well as each filter must be traversed whether it matches or not. e.g. a simple example to map 3 firewall marks to tins: MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' ) tc filter add dev $DEV parent $MAJOR protocol all handle 0x01 fw action skbedit priority ${MAJOR}1 tc filter add dev $DEV parent $MAJOR protocol all handle 0x02 fw action skbedit priority ${MAJOR}2 tc filter add dev $DEV parent $MAJOR protocol all handle 0x03 fw action skbedit priority ${MAJOR}3 Another option is to use eBPF cls_act with tc filters e.g. MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' ) tc filter add dev $DEV parent $MAJOR bpf da obj my-bpf-fwmark-to-class.o This has the disadvantages of a) needing someone to write & maintain the bpf program, b) a bpf toolchain to compile it and c) needing to hardcode the major number in the bpf program so it matches the cake instance (or forcing the cake instance to a particular major number) since the major number cannot be passed to the bpf program via tc command line. As already hinted at by the previous examples, it would be helpful to associate tins with something that survives the Internet path and ideally allows tin selection on both egress and ingress. Netfilter's conntrack permits setting an identifying mark on a connection which can also be restored to an ingress packet with tc action connmark e.g. tc filter add dev eth0 parent ffff: protocol all prio 10 u32 \ match u32 0 0 flowid 1:1 action connmark action mirred egress redirect dev ifb1 Since tc's connmark action has restored any connmark into skb->mark, any of the previous solutions are based upon it and in one form or another copy that mark to the skb->priority field where again CAKE picks this up. This change cuts out at least one of the (less intuitive & non-scalable) middlemen and permit direct access to skb->mark. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
George Amanakis authored
CAKE host fairness does not work well with TCP flows in dual-srchost and dual-dsthost setup. The reason is that ACKs generated by TCP flows are classified as sparse flows, and affect flow isolation from other hosts. Fix this by calculating host_load based only on the bulk flows a host generates. In a hash collision the host_bulk_flow_count values must be decremented on the old hosts and incremented on the new ones *if* the queue is in the bulk set. Reported-by: Pete Heist <peteheist@gmail.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Mar, 2019 9 commits
-
-
David S. Miller authored
Harini Katakam says: ==================== Macb power management support for ZynqMP This series adds support for macb suspend/resume with system power down. In relation to the above, this series also updates mdio_read/write function for PM and adds tsu clock management. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harini Katakam authored
When macb device is suspended and system is powered down, the clocks are removed and hence macb should be closed gracefully and restored upon resume. This patch does the same by switching off the net device, suspending phy and performing necessary cleanup of interrupts and BDs. Upon resume, all these are reinitialized again. Reset of macb device is done only when GEM is not a wake device. Even when gem is a wake device, tx queues can be stopped and ptp device can be closed (tsu clock will be disabled in pm_runtime_suspend) as wake event detection has no dependency on this. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harini Katakam authored
Add runtime pm functions and move clock handling there. Add runtime PM calls to mdio functions to allow for active mdio bus. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harini Katakam authored
TSU clock needs to be enabled/disabled as per support in devicetree and it should also be controlled during suspend/resume (WOL has no dependency on this clock). Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harini Katakam authored
Replace the while loop in MDIO read/write functions with a timeout. In addition, add a check for MDIO bus busy before initiating a new operation as well to make sure there is no ongoing MDIO operation. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tristram Ha says: ==================== net: dsa: microchip: add KSZ9893 switch support This series of patches is to modify the KSZ9477 DSA driver to support running KSZ9893 switch. The KSZ9893 switch is similar to KSZ9477 except the ingress tail tag has 1 byte instead of 2 bytes. The XMII register that governs the MAC communication also has different register definitions. v1 - Put KSZ9893 tagging in separate patch - Remove other switch support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tristram Ha authored
Add KSZ9893 switch support in KSZ9477 driver. This switch is similar to KSZ9477 except the ingress tail tag has 1 byte instead of 2 bytes, so KSZ9893 tagging will be used. The XMII register that governs how the host port communicates with the MAC also has different register definitions. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tristram Ha authored
KSZ9893 switch is similar to KSZ9477 switch except the ingress tail tag has 1 byte instead of 2 bytes. The size of the portmap is smaller and so the override and lookup bits are also moved. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tristram Ha authored
Document additional Microchip KSZ9477 family switches. Show how KSZ8565 switch should be configured as the host port is port 7 instead of port 5. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Mar, 2019 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2019-03-01 This series adds multipath offload support and contains some small updates to mlx5 driver. Multipath offload support from Roi Dayan: We are going to track SW multipath route and related nexthops and reflect that as port affinity to the HW. 1) Some patches are preparation. 2) add the multipath mode and fib events handling. 3) add support to handle offload failure for net error, i.e. port down. 4) Small updates to match the behavior of multipath Two small updates from Eran Ben Elisha, 5) Make a function static 6) Update PCIe supported devices list. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: 1) Add .release_ops to properly unroll .select_ops, use it from nft_compat. After this change, we can remove list of extensions too to simplify this codebase. 2) Update amanda conntrack helper to support v3.4, from Florian Tham. 3) Get rid of the obsolete BUGPRINT macro in ebtables, from Florian Westphal. 4) Merge IPv4 and IPv6 masquerading infrastructure into one single module. From Florian Westphal. 5) Patchset to remove nf_nat_l3proto structure to get rid of indirections, from Florian Westphal. 6) Skip unnecessary conntrack timeout updates in case the value is still the same, also from Florian Westphal. 7) Remove unnecessary 'fall through' comments in empty switch cases, from Li RongQing. 8) Fix lookup to fixed size hashtable sets on big endian with 32-bit keys. 9) Incorrect logic to deactivate path of fixed size hashtable sets, element was being tested to self. 10) Remove nft_hash_key(), the bitmap set is always selected for 16-bit keys. 11) Use boolean whenever possible in IPVS codebase, from Andrea Claudi. 12) Enter close state in conntrack if RST matches exact sequence number, from Florian Westphal. 13) Initialize dst_cache in tunnel extension, from wenxu. 14) Pass protocol as u16 to xt_check_match and xt_check_target, from Li RongQing. 15) SCTP header is granted to be in a linear area from IPVS NAT handler, from Xin Long. 16) Don't steal packets coming from slave VRF device from the ip_sabotage_in() path, from David Ahern. 17) Fix unsafe update of basechain stats, from Li RongQing. 18) Make sure CONNTRACK_LOCKS is power of 2 to let compiler optimize modulo operation as bitwise AND, from Li RongQing. 19) Use device_attribute instead of internal definition in the IDLETIMER target, from Sami Tolvanen. 20) Merge redir, masq and IPv4/IPv6 NAT chain types, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-03-02 Here's one more bluetooth-next pull request for the 5.1 kernel: - Added support for MediaTek MT7663U and MT7668U UART devices - Cleanups & fixes to the hci_qca driver - Fixed wakeup pin behavior for QCA6174A controller Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Sean Wang authored
This adds the support of enabling MT7663U and MT7668U Bluetooth function running on the top of btmtkuart driver. There are a few differences between MT766[3,8]U and MT7622 where MT766[3,8]U are standalone devices based on UART transport while MT7622 bluetooth is a built-in device on MediaTek SoC communicating with the host through BTIF serial transport. Thus, extra setup sequence is necessary for these standalone devices such as remote regulator and reset control via GPIO, baud rate changing handshake between the host and device and so on. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Sean Wang authored
Update binding document with adding support of MT7663U and MT7668U UART devices to mediatek-bluetooth. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Matthias Kaehlcke authored
The current 300ms delay after a baudrate change is extremely long. For WCN3990 it is sufficient to wait 10ms after the baudrate change request has been sent over the wire. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2019-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.1 Last set of patches. A new hardware support for mt76 otherwise quite normal. Major changes: mt76 * add driver for MT7603E/MT7628 ath10k * more preparation for SDIO support wil6210 * support up to 20 stations in AP mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mao Wenan authored
If register_netdev() is failed to register sitn->fb_tunnel_dev, it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev). BUG: memory leak unreferenced object 0xffff888378daad00 (size 512): comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s) hex dump (first 32 bytes): 00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline] [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline] [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline] [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970 [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848 [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129 [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314 [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437 [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107 [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165 [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919 [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline] [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224 [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<0000000039acff8a>] 0xffffffffffffffff Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Despite what the datesheet says, the silicon implements the older way of snapshoting the statistics. Change the op. Reported-by: Chris.Healy@zii.aero Tested-by: Chris.Healy@zii.aero Fixes: 0ac64c39 ("net: dsa: mv88e6xxx: mv88e6161 uses mv88e6320 stats snapshot") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When calculating the multipath hash for input routes the flow info is not available and therefore should not be used. Fixes: 24ba1440 ("route: Add multipath_hash in flowi_common to make user-define hash") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Cc: wenxu <wenxu@ucloud.cn> Acked-by: wenxu <wenxu@ucloud.cn> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Antoine Tenart says: ==================== net: mvpp2: fixes and improvements This series aims to improve the Marvell PPv2 driver and to fix various issues we encountered while testing the ports in many different configurations. The series is based on top of Russell PPv2 phylink rework and improvement. I'm not sending a v2 of the previous fixes series as half the patches are not the same and lots of development happened in between. While this series contains fixes, it's sent to net-next as it is based on top of Russell patches that were merged into net-next. I'm also aiming at net-next as the series reworks critical paths of the PPv2 driver, such as the reset handling of various blocks, to let more weeks for users to tests and for possible fixes to be sent before it lands into a stable kernel version. The series is divided into three parts: - Patches 1 to 3 are cosmetic changes, sent alongside the series, as I saw these small issues while working on this. - Patches 5 to 8 are fixing (or improving) individual issues that we found while testing PPv2.1 and PPv2.2 ports while using various interfaces. Notable fixes are we support back RGMII interfaces (on both PPv2.1 and PPv2.2), as their support was broken by previous patches. We also reworked the RXQ computation as the RXQ assignment was not checking the maximum number of RXQ available, and was broken for PPv2.1. - As discussed in a previous fixes series, patches 9 to 15 rework the way blocks are set in reset in the PPv2 engine (plus related changes). There are four blocks we want to control the reset status: two MAC (GMAC and XLG MAC) and two PCS (MPCS and XPCS). The XLG MAC is used for 10G connexions and uses the MPCS or the XPCS depending on the mode used (10GKR / XAUI / RXAUI) and the GMAC is used for the other modes. The idea is to set all blocks in reset by default, and when not used, and to de-assert the reset only when a block is used. There are four cases to take in account: 1. Boot time: all four blocks should be put in reset, as we do not know their initial state (configured by the firmware/bootloader). 2. Link up: only the blocks used by a given mode should be put out of reset (eg. 10GKR uses the XLG MAC and the MPCS). 3. Mode reconfiguration: some ports may support mode reconfiguration, and switching between the GMAC and the XLG MAC (or between the two PCS). All blocks should be put in reset, and only the one used should be put out of reset. 4. Link down: all four blocks are put in reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch adds calls in the stop() helper to ensure both MACs and both PCS blocks are set in reset when the user manually sets a port down. This is done so that we have the exact same block reset states at boot time and when a port is set down. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch sets both the XPCS and MPCS blocks in reset when they aren't used. This is done both at boot time and when reconfiguring a port mode. The advantage now is that only the PCS used is set out of reset when the port is configured (10GKR uses the MCPS while RXAUI uses the XPCS). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch makes sure both PPv2 MACs (GMAC + XLG MAC) are set in reset while a port is reconfigured. This is done so that we make sure a MAC is in a reset state when not used, as only one of the two will be set out of reset after the port is configured properly. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch reworks the way the XLG MAC is set in reset: the XLG MAC is set in reset at probe time and taken out of this state only when used. The idea is to move forward a situation where only the blocks used are taken out of reset. This also has the effect to handle the GMAC and the XLG MAC in a similar way (the GMAC already is set in reset at boot time). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch force the XLG MAC link state in the phylink link_up() and link_down() helpers when not using in-band auto-negotiation. This mimics what's already done for the GMAC and follows what's advised in the phylink documentation. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch improves the XLG configuration function, to only update the XLG configuration register when a change is needed. This helps not writing over and over the same XLG configuration each time phylink request the MAC to be configured. This mimics the GMAC configuration function. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch modifies the port_disable() helper to always disable both the GMAC and the XLG MAC when called. At boot time we do not know of a port was enabled in the firmware/bootloader, and if so what mode was used (hence which of the two MACs was used). This also help in implementing a logic where all blocks are disabled when not used, and only enabled regarding the current mode used on a given port. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
The GMAC configuration helper modifies values in the auto-negotiation register. Some of its values require the port to be forced down when modifying their values. This patches fixes the check made on the bit to be updated in this register, so that the port is forced down when needed. This fix cases where some of those parameters were updated, but not taken into account, such as when using RGMII interfaces. Fixes: d14e078f ("net: marvell: mvpp2: only reprogram what is necessary on mac_config") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
The patch fixes the computation of RXQs being used by the PPv2 driver, which is set depending on the PPv2 engine version and the queue mode used. There are three cases: - PPv2.1: 1 RXQ per CPU. - PPV2.2 with MVPP2_QDIST_MULTI_MODE: 1 RXQ per CPU. - PPv2.2 with MVPP2_QDIST_SINGLE_MODE: 1 RXQ is shared between the CPUs. The PPv2 engine supports a maximum of 32 queues per port. This patch adds a check so that we do not overstep this maximum. It appeared the calculation was broken for PPv2.1 engines since f8c6ba84, as PPv2.1 ports ended up with a single RXQ while they needed 4. This patch fixes it. Fixes: f8c6ba84 ("net: mvpp2: use only one rx queue per port per CPU") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
The Phylink validate function is the Marvell PPv2 driver makes a check on the GoP id. This is valid an has to be done when using PPv2.2 engines but makes no sense when using PPv2.1. The check done when using an RGMII interface makes sure the GoP id is not 0, but this breaks PPv2.1. Fixes it. Fixes: 0fb628f0 ("net: mvpp2: fix phylink handling of invalid PHY modes") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch adds a check on the PPv2 version in-use not to reconfigure the port mode when an interface is updated when using PPv2.1 as the functions called are PPv2.2 specific. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
We had a check in the mvpp2_mac_link_down() function (called by phylink) to avoid disabling the port when link interrupts are used. It turned out the interrupt can still be used with the port disabled. We can thus remove this check. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
Cosmetic patch fix the alignment of the MVPP2_GMAC_CONFIG_MII_SPEED macro definition. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
The Marvell PPv2 port structure stores the GoP id of a given port. This information is specific to PPv2.2, but cannot be used by PPv2.1. Update its comment to denote this specificity. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-