- 03 Nov, 2015 17 commits
-
-
Ayala Beker authored
Currently, cfg80211 rejects updates of AID and listen interval parameters for existing entries. This information is known only at association stage and as a result it's impossible to update entries that were added unassociated. Fix this by allowing updates of these properies for stations that the driver (or mac80211) assigned unassociated state. This then fixes mac80211's use of NL80211_FEATURE_FULL_AP_CLIENT_STATE. Signed-off-by:
Ayala Beker <ayala.beker@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Chaitanya T K authored
Channel context driver operations can sleep, so add might_sleep() and document this. Signed-off-by:
Chaitanya T K <chaitanya.mgit@gmail.com> Signed-off-by:
-
Johannes Berg authored
Allow distinguishing the non-station case from the case of a station without rates, by using -1 for the non-station case. This value cannot be reached with a station since that many legacy rates don't exist. Signed-off-by:
-
Johannes Berg authored
As WMM is required for HT/VHT operation, treat bad WMM parameters more gracefully by falling back to default parameters instead of not using WMM assocation. This makes it possible to still use HT or VHT, although potentially with reduced quality of service due to unintended WMM parameters. Signed-off-by: -
Emmanuel Grumbach authored
Disabling WMM has a huge impact these days. It implies that HT and VHT will be disabled which means that the throughput will be drammatically reduced. Since the AIFSN is a transmission parameter, we can play a bit and fix it up to make it compliant with the 802.11 specification which requires it to be at least 2. Increasing it from 1 to 2 will slightly reduce the likelyhood to get a transmission opportunity compared to other clients that would accept to set AIFSN=1, but at least it will allow HT and VHT which is a huge gain. Signed-off-by:
-
Johannes Berg authored
The function currently determines this value, for use in bss_info.qos, based on the interface type itself. Make it a parameter instead and set it with the same logic for now. Signed-off-by: -
Johannes Berg authored
The previous patch changed mac80211 to always report an event after a CQM RSSI reconfiguration. Document that as expected behaviour in both the cfg80211 and mac80211 API. Currently, iwlmvm already implements that behaviour; the other drivers implementing CQM RSSI events may have to be changed. This behaviour lets userspace know what the current state is without relying on querying the data which is racy. Reviewed-by:
Sharon, Sara <sara.sharon@intel.com> Signed-off-by:
-
Matthias Schiffer authored
llid_in_use needs to be limited to stations of the same VIF, otherwise it will cause a NULL deref as the sta_info of non-mesh-VIFs don't have sta->mesh set. Steps to reproduce: modprobe mac80211_hwsim channels=2 iw phy phy0 interface add ibss0 type ibss iw phy phy0 interface add mesh0 type mp iw phy phy1 interface add ibss1 type ibss iw phy phy1 interface add mesh1 type mp ip link set ibss0 up ip link set mesh0 up ip link set ibss1 up ip link set mesh1 up iw dev ibss0 ibss join foo 2412 iw dev ibss1 ibss join foo 2412 # Ensure that ibss0 and ibss1 are actually associated; I often need to # leave and join the cell on ibss1 a second time. iw dev mesh0 mesh join bar iw dev mesh1 mesh join bar # crash Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by:
-
Arik Nemtsov authored
When 11n peers performs a TDLS connection on a legacy BSS, the HT operation IE must be specified according to IEEE802.11-2012 section 9.23.3.2. Otherwise HT-protection is compromised and the medium becomes noisy for both the TDLS and the BSS links. Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by:
-
Eliad Peller authored
Scheduled scan has to be reconfigured only if wowlan wasn't configured, since otherwise it should continue to run (with the 'any' trigger) or be aborted. The current code will end up asking the driver to start a new scheduled scan without stopping the previous one, and leaking some memory (from the previous request.) Fix this by doing the abort/restart under the proper conditions. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
-
Eliad Peller authored
If drv_start() fails during hw_restart, all the running interfaces are being closed/stopped, which results in drv_stop() being called, although the driver was never started successfully. This might cause drivers to perform operations on uninitialized memory (as they assume it was initialized on drv_start) Consider the local->started flag, and call the driver's stop() op only if drv_start() succeeded before. Move drv_start() and drv_stop() to driver-ops.c, as they are no longer simple wrappers. Signed-off-by:
-
Andrei Otcheretianski authored
The recalc_smps work can run after the station disassociates. At this stage we already released the channel, but the work will be cancelled only when the interface stops. In this scenario we can hit the warning in ieee80211_recalc_smps, so just remove it. Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
-
Eliad Peller authored
Requesting hw restart during suspend might result in the restart work being executed after mac80211 and the hw are suspended. Solve the race by simply scheduling the restart work on a freezable workqueue. Note that there can be some cases of reconfiguration on resume (besides the hardware restart): * wowlan is not configured - All the interfaces removed were removed on suspend, and drv_stop() was called. At this point the driver shouldn't expect for hw_restart anyway, so we can simply cancel it (on resume). * wowlan is configured, drv_resume() == 1 There is no definitive expected behavior in this case, as each driver might have different expectations (e.g. setting some flags on suspend/restart vs. not handling spurious recovery). For now, simply let the hw_restart work run again after resume, and hope the driver will handle it well (or at least initiate another hw restart). Signed-off-by: -
Andrei Otcheretianski authored
Local request to deauthenticate wasn't handled while associating, thus the association could continue even when the user space required to disconnect. Cc: stable@vger.kernel.org Signed-off-by:
-
Arik Nemtsov authored
In TDLS channel-switch operations the chandef can sometimes be NULL. Avoid an oops in the trace code for these cases and just print a chandef full of zeros. Cc: stable@vger.kernel.org Fixes: a7a6bdd0 ("mac80211: introduce TDLS channel switch ops") Signed-off-by:
-
Ola Olsson authored
If parse_acl_data succeeds but the subsequent parsing of smps attributes fails, there will be a memory leak due to early returns. Fix that by moving the ACL parsing later. Cc: stable@vger.kernel.org Fixes: 18998c38 ("cfg80211: allow requesting SMPS mode on ap start") Signed-off-by:
Ola Olsson <ola.olsson@sonymobile.com> Signed-off-by:
-
Janusz.Dziedzic@tieto.com authored
In case of one shot NOA the interval can be 0, catch that instead of potentially (depending on the driver) crashing like this: divide error: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffc08e891c>] ieee80211_extend_absent_time+0x6c/0xb0 [mac80211] [<ffffffffc08e8a17>] ieee80211_update_p2p_noa+0xb7/0xe0 [mac80211] [<ffffffffc069cc30>] ath9k_p2p_ps_timer+0x170/0x190 [ath9k] [<ffffffffc070adf8>] ath_gen_timer_isr+0xc8/0xf0 [ath9k_hw] [<ffffffffc0691156>] ath9k_tasklet+0x296/0x2f0 [ath9k] [<ffffffff8107ad65>] tasklet_action+0xe5/0xf0 [...] Cc: stable@vger.kernel.org [3.16+, due to d463af4a using it] Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by:
-
- 22 Oct, 2015 23 commits
-
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2015-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another set of patches for the current cycle: * I merged net-next back to avoid a conflict with the * cfg80211 scheduled scan API extensions * preparations for better scan result timestamping * regulatory cleanups * mac80211 statistics cleanups * a few other small cleanups and fixes ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
yankejian authored
the global Soc configuration is treated by syscon, and sub ctrl bus is Soc bus. it has to be treated by syscon. Signed-off-by:
yankejian <yankejian@huawei.com> Signed-off-by:
lisheng <lisheng011@huawei.com> Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Trivial fixes for cxgb4 driver This patch series updates driver description for next gen. adapters, updates firmware info., returns error for setup_rss error case, restores L1 configuration in case of FW rejects new config, updates and aligns ethtool get stats settings, etc This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Update ethtool get_drvinfo to display regdump len and also update firmware string version print to display N/A in case FW isn't present Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
In the ethtool set_settings() routine we need to remember our old L1 Configuration in case the firmware rejects the request and then restore that. Signed-off-by:
-
Hariprasad Shenai authored
For {1, 10, 40} Gb/s. Prohibiting turning off autonegotiation isn't anywhere in the standard. Signed-off-by: -
Hariprasad Shenai authored
Align the ethtool get stats settings with the rest so it looks uniform Signed-off-by:
-
Pravin B Shelar authored
With use of lwtunnel, we can directly call dev_queue_xmit() rather than calling netdev vport send operation. Following change make tunnel vport code bit cleaner. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Pravin B Shelar authored
Patch fixes following sparse warning. net/openvswitch/flow_netlink.c:583:30: warning: incorrect type in assignment (different base types) net/openvswitch/flow_netlink.c:583:30: expected restricted __be16 [usertype] ipv4 net/openvswitch/flow_netlink.c:583:30: got int Fixes: 6b26ba3a ("openvswitch: netlink attributes for IPv6 tunneling") Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== bpf_perf_event_output helper Over the last year there were multiple attempts to let eBPF programs output data into perf events by He Kuang and Wangnan. The last one was: https://lkml.org/lkml/2015/7/20/736 It was almost perfect with exception that all bpf programs would sent data into one global perf_event. This patch set takes different approach by letting user space open independent PERF_COUNT_SW_BPF_OUTPUT events, so that program output won't collide. Wangnan is working on corresponding perf patches. ==================== Signed-off-by:
-
Alexei Starovoitov authored
Performance test and example of bpf_perf_event_output(). kprobe is attached to sys_write() and trivial bpf program streams pid+cookie into userspace via PERF_COUNT_SW_BPF_OUTPUT event. Usage: $ sudo ./bld_x64/samples/bpf/trace_output recv 2968913 events per sec Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Alexei Starovoitov authored
This helper is used to send raw data from eBPF program into special PERF_TYPE_SOFTWARE/PERF_COUNT_SW_BPF_OUTPUT perf_event. User space needs to perf_event_open() it (either for one or all cpus) and store FD into perf_event_array (similar to bpf_perf_event_read() helper) before eBPF program can send data into it. Today the programs triggered by kprobe collect the data and either store it into the maps or print it via bpf_trace_printk() where latter is the debug facility and not suitable to stream the data. This new helper replaces such bpf_trace_printk() usage and allows programs to have dedicated channel into user space for post-processing of the raw data collected. Signed-off-by:
-
Alexei Starovoitov authored
Instead of WARN_ON in perf_event_output() on unpaded raw samples, pad them automatically. Signed-off-by:
-
Brenden Blanco authored
In the ipv4 outbound path of an ipvlan device in l3 mode, the ifindex is being grabbed from dev_get_iflink. This works for the physical device case, since as the documentation of that function notes: "Physical interfaces have the same 'ifindex' and 'iflink' values.". However, if the master device is a veth, and the pairs are in separate net namespaces, the route lookup will fail with -ENODEV due to outer veth pair being in a separate namespace from the ipvlan master/routing namespace. ns0 | ns1 | ns2 veth0a--|--veth0b--|--ipvl0 In ipvlan_process_v4_outbound(), a packet sent from ipvl0 in the above configuration will pass fl.flowi4_oif == veth0a to ip_route_output_flow(), but *net == ns1. Notice also that ipv6 processing is not using iflink. Since there is a discrepancy in usage, fixup both v4 and v6 case to use local dev variable. Tested this with l3 ipvlan on top of veth, as well as with single physical interface in the top namespace. Signed-off-by:
Brenden Blanco <bblanco@plumgrid.com> Reviewed-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Eric Dumazet authored
Allowing an application to set whatever limit for the list of recently RST fastopen sessions [1] is not wise, as it open ways to deplete kernel memory. Cap the user provided limit by somaxconn sysctl, like listen() backlog. [1] https://tools.ietf.org/html/rfc7413#section-5.1Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Vivien Didelot authored
This header file only contains the platform data structure definition, so move it to the include/linux/platform_data/ directory. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
Remove the inclusion of linux/mdio-gpio.h in nas4220b, wbd111 and wbd222 boards since mdio-gpio is not used. Signed-off-by:
-
Wu Fengguang authored
drivers/net/ethernet/hisilicon/hns/hnae.c:442:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Eric Dumazet authored
Tom Herbert added SIT support to GRO with commit 19424e05 ("sit: Add gro callbacks to sit_offload"), later reverted by Herbert Xu. The problem came because Tom patch was building GRO packets without proper meta data : If packets were locally delivered, we would not care. But if packets needed to be forwarded, GSO engine was not able to segment individual segments. With the following patch, we correctly set skb->encapsulation and inner network header. We also update gso_type. Tested: Server : netserver modprobe dummy ifconfig dummy0 8.0.0.1 netmask 255.255.255.0 up arp -s 8.0.0.100 4e:32:51:04:47:e5 iptables -I INPUT -s 10.246.7.151 -j TEE --gateway 8.0.0.100 ifconfig sixtofour0 sixtofour0 Link encap:IPv6-in-IPv4 inet6 addr: 2002:af6:798::1/128 Scope:Global inet6 addr: 2002:af6:798::/128 Scope:Global UP RUNNING NOARP MTU:1480 Metric:1 RX packets:411169 errors:0 dropped:0 overruns:0 frame:0 TX packets:409414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20319631739 (20.3 GB) TX bytes:29529556 (29.5 MB) Client : netperf -H 2002:af6:798::1 -l 1000 & Checked on server traffic copied on dummy0 and verify segments were properly rebuilt, with proper IP headers, TCP checksums... tcpdump on eth0 shows proper GRO aggregation takes place. Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
