- 25 Jan, 2008 40 commits
-
-
Michael Krufky authored
If we pass TDA18271_GATE_DIGITAL into tda18271_attach(), it will always try to use the digital demodulator's i2c gate. If we pass TDA18271_GATE_ANALOG into tda18271_attach(), it will always try to use the analog demodulator's i2c gate. If we pass TDA18271_GATE_AUTO into tda18271_attach(), it will try to use the analog demodulator's i2c gate when tuning in analog mode, and it will try to use the digital demodulator's i2c gate when tuning in digital mode. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Use an enum rather than an integer #define to store analog / digital state. Signed-off-by:
-
Mauro Carvalho Chehab authored
Those newer functions are used by saa7134-empress. Adds export for them: +EXPORT_SYMBOL_GPL(saa7134_g_ctrl); +EXPORT_SYMBOL_GPL(saa7134_s_ctrl); +EXPORT_SYMBOL_GPL(saa7134_queryctrl); Signed-off-by: -
Mauro Carvalho Chehab authored
saa7134 were converted to video_ioctl2, but saa7134_empress weren't. This broke saa7134-empress, since it were dependent of saa7134_common_ioctl. With the conversion, the module had a size decrease of 436 bytes on x86_64: text data bss dec hex filename 5196 4912 4 10112 2780 old/saa7134-empress.ko 4760 4912 4 9676 25cc new/saa7134-empress.ko Signed-off-by: -
Mauro Carvalho Chehab authored
VBI were broken, since there weren't any function handlers for it. This patch fixes it, by removing the vbi_template, using, instead video_template. This also saves some space at the data segment. Signed-off-by: -
Mauro Carvalho Chehab authored
Some functions are used also by saa7134-empress, and need to be exported. To avoid namespace confusion, rename all of them to saa7134_ Signed-off-by: -
Michael Krufky authored
Don't waste 128 bytes of memory for a name that might not actually need it. Signed-off-by:
-
Michael Krufky authored
Fix codingstyle issue discovered after using new checkpatch.pl ERROR: open brace '{' following struct go on the same line 396: FILE: linux/drivers/media/video/tda8290.h:24: +struct tda829x_config +{ Signed-off-by: -
Michael Krufky authored
Fix type inconsistency in t->mode value, causing the following: tuner' 1-0043: freq set: unknown mode: 0x0004! (only visible with tuner debug enabled) Signed-off-by:
-
Michael Krufky authored
Store the analog demodulator name in fe.ops.analog_demod_ops.info.name Signed-off-by:
-
Michael Krufky authored
- remove dependency of tda8290 module on struct tuner - move tuner_foo printk macros from tuner-driver.h into tuner-core.c - clean up #includes of tuner-i2c.h / tuner-driver.h Signed-off-by:
-
Michael Krufky authored
Always call tda829x_release if tda829x_attach fails for a reason other than failure to allocate memory for private structure. Signed-off-by:
-
Michael Krufky authored
We can tell whether we are tuning television or radio by testing for struct analog_parameters *params->mode == V4L2_TUNER_RADIO There is no longer any need for separate set_tv_freq and set_radio_freq functions in the analog tuner demodulator modules. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Richard Knutsson authored
Fix "warning: Using plain integer as NULL pointer". Convert 'x < y ? x : y' to use min() instead. Signed-off-by:
Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mike Isely authored
The pvrusb2 driver tries to keep all device specific attributes in a single data structure in one source file. This change further cleans up how that table is set up. We now try to group everything together for each specific device, and the number of symbols exported from this module has now been reduced to a single global. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Add support for the AVerMedia EZMaker PCI Deluxe and update the ivtv cardlist. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Manually fixed all pertinent checkpatch.pl errors inside the source code. Also removed some unused code at the driver and a few minor cleanups. Signed-off-by: -
Mauro Carvalho Chehab authored
mv_count is a counter used to move the vertical bars. Before this patch, it where a static var. This works fine for just one device. However, when using multiple devices, every device would increment it. This patch moves it to its correct place: struct vivi_dev. So, now, each device has its own data. Signed-off-by: -
Mauro Carvalho Chehab authored
Now, it is possible to open multiple vivi devices, by using n_devs parameter. This makes vivi driver closer to a real one. Signed-off-by: -
Mauro Carvalho Chehab authored
There were a trouble at vivi driver when using non-zero inodes. This where due to not properly preserving the minor inode after calling video_register. Since this driver is a reference for newer drivers, and it is possible to have more than one video device inside the machine, this patch makes vivi to dynamically allocate video_device struct. Thanks to Gregor Jasny <jasny@vidsoft.de> for pointing the issue. Also, this patch removes a very anoying (but useless) message of not having a proper release call. CC: Gregor Jasny <jasny@vidsoft.de> Signed-off-by: -
Albert Graham authored
This patch enabled the IR remote control for the Avermedia M102 (card=110), which appears to be the same IR as the already supported device on the Avermedia AVerTV GO 007 FM (card=57) model, the code is two one liners which enable the IR for this device (subsystem: 1461:f31e) Signed-off-by:
Albert Graham <agraham@g-b.net> Signed-off-by:
-
Andrew Morton authored
dont just copy-and-paste stuff. (compile-tested this time) Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Nick Piggin authored
Convert v4l from nopage to fault. Remove redundant vma range checks. Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Michael Krufky authored
The tuning request coming in from userspace is already center adjusted, so we should not adjust to center (+1.75mhz) within the driver. Signed-off-by:
-
Hans Verkuil authored
cx25840_read4 reads a little-endian 32-bit value whereas cx25840_write4 writes the 32-bit value as big-endian. Convert write4 to use little-endian as well (that's the correct endianness). Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
