- 03 Jul, 2018 40 commits
-
-
Sridhar Pitchai authored
commit 29927dfb upstream. When Linux runs as a guest VM in Hyper-V and Hyper-V adds the virtual PCI bus to the guest, Hyper-V always provides unique PCI domain. commit 4a9b0933 ("PCI: hv: Use device serial number as PCI domain") overrode unique domain with the serial number of the first device added to the virtual PCI bus. The reason for that patch was to have a consistent and short name for the device, but Hyper-V doesn't provide unique serial numbers. Using non-unique serial numbers as domain IDs leads to duplicate device addresses, which causes PCI bus registration to fail. commit 0c195567 ("netvsc: transparent VF management") avoids the need for commit 4a9b0933 ("PCI: hv: Use device serial number as PCI domain"). When scripts were used to configure VF devices, the name of the VF needed to be consistent and short, but with commit 0c195567 ("netvsc: transparent VF management") all the setup is done in the kernel, and we do not need to maintain consistent name. Revert commit 4a9b0933 ("PCI: hv: Use device serial number as PCI domain") so we can reliably support multiple devices being assigned to a guest. Tag the patch for stable kernels containing commit 0c195567 ("netvsc: transparent VF management"). Fixes: 4a9b0933 ("PCI: hv: Use device serial number as PCI domain") Signed-off-by:
Sridhar Pitchai <sridhar.pitchai@microsoft.com> [lorenzo.pieralisi@arm.com: trimmed commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v4.14+ Reviewed-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tokunori Ikegami authored
commit 2a027b47 upstream. The erratum and workaround are described by BCM5300X-ES300-RDS.pdf as below. R10: PCIe Transactions Periodically Fail Description: The BCM5300X PCIe does not maintain transaction ordering. This may cause PCIe transaction failure. Fix Comment: Add a dummy PCIe configuration read after a PCIe configuration write to ensure PCIe configuration access ordering. Set ES bit of CP0 configu7 register to enable sync function so that the sync instruction is functional. Resolution: hndpci.c: extpci_write_config() hndmips.c: si_mips_init() mipsinc.h CONF7_ES This is fixed by the CFE MIPS bcmsi chipset driver also for BCM47XX. Also the dummy PCIe configuration read is already implemented in the Linux BCMA driver. Enable ExternalSync in Config7 when CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y too so that the sync instruction is externalised. Signed-off-by:
Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by:
Paul Burton <paul.burton@mips.com> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19461/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Joakim Tjernlund authored
commit f1ce87f6 upstream. cfi_ppb_unlock() walks all flash chips when unlocking sectors, avoid walking chips unaffected by the unlock operation. Fixes: 1648eaaa ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Joakim Tjernlund authored
commit 0cd8116f upstream. The "sector is in requested range" test used to determine whether sectors should be re-locked or not is done on a variable that is reset everytime we cross a chip boundary, which can lead to some blocks being re-locked while the caller expect them to be unlocked. Fix the check to make sure this cannot happen. Fixes: 1648eaaa ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by:
-
Joakim Tjernlund authored
commit 5fdfc3db upstream. cfi_ppb_unlock() tries to relock all sectors that were locked before unlocking the whole chip. This locking used the chip start address + the FULL offset from the first flash chip, thereby forming an illegal address. Fix that by using the chip offset(adr). Fixes: 1648eaaa ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by:
-
Joakim Tjernlund authored
commit f93aa8c4 upstream. do_ppb_xxlock() fails to add chip->start when querying for lock status (and chip_ready test), which caused false status reports. Fix that by adding adr += chip->start and adjust call sites accordingly. Fixes: 1648eaaa ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by:
-
Tokunori Ikegami authored
commit dfeae107 upstream. For the word write it is checked if the chip has the correct value. But it is not checked for the write buffer as only checked if ready. To make sure for the write buffer change to check the value. It is enough as this patch is only checking the last written word. Since it is described by data sheets to check the operation status. Signed-off-by:
-
Chuck Lever authored
commit a8f688ec upstream. The use of -EAGAIN in rpcrdma_convert_iovs() is a latent bug: the transport never calls xprt_write_space() when more pages become available. -ENOBUFS will trigger the correct "delay briefly and call again" logic. Fixes: 7a89f9c6 ("xprtrdma: Honor ->send_request API contract") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # 4.8+ Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Leon Romanovsky authored
commit 6b1ca7ec upstream. There is no need to crash the machine if unknown work request was received in SQP MAD. Cc: <stable@vger.kernel.org> # 3.6 Fixes: 37bfc7c1 ("IB/mlx4: SR-IOV multiplex and demultiplex MADs") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 1bc0299d upstream. The following code fails to allocate a buffer for the tail address that the hardware DMAs into when the user context DMA_RTAIL is set. if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL)) { rcd->rcvhdrtail_kvaddr = dma_zalloc_coherent( &dd->pcidev->dev, PAGE_SIZE, &dma_hdrqtail, gfp_flags); if (!rcd->rcvhdrtail_kvaddr) goto bail_free; rcd->rcvhdrqtailaddr_dma = dma_hdrqtail; } So the rcvhdrtail_kvaddr would then be NULL. The mmap logic fails to check for a NULL rcvhdrtail_kvaddr. The fix is to test for both user and kernel DMA_TAIL options during the allocation as well as testing for a NULL rcvhdrtail_kvaddr during the mmap processing. Additionally, all downstream testing of the capmask for DMA_RTAIL have been eliminated in favor of testing rcvhdrtail_kvaddr. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Sebastian Sanchez authored
commit af8aab71 upstream. All threads queuing CQ entries on different CQs are unnecessarily synchronized by a spin lock to check if the CQ kthread worker hasn't been destroyed before queuing an CQ entry. The lock used in 6efaf10f ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker") is a device global lock and will have poor performance at scale as completions are entered from a large number of CPUs. Convert to use RCU where the read side of RCU is rvt_cq_enter() to determine that the worker is alive prior to triggering the completion event. Apply write side RCU semantics in rvt_driver_cq_init() and rvt_cq_exit(). Fixes: 6efaf10f ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker") Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
commit a93a0a31 upstream. User send context integrity bits are cleared before the context is disabled. If the send context is still processing data, any packets that need those integrity bits will cause an error and halt the send context. During the disable handling, the driver waits for the context to drain. If the context is halted, the driver will eventually timeout because the context won't drain and then incorrectly bounce the link. Reorder the bit clearing and the context disable. Examine the software state and send context status as well as the egress status to determine if a send context is in the halted state. Promote the check macros to static functions for consistency with the new check and to follow kernel style. Remove an unused define that refers to the egress timeout. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by:
-
Mike Marciniszyn authored
commit 8c79d822 upstream. There are config dependent code paths that expose panics in unload paths both in this file and in debugfs_remove_recursive() because CONFIG_FAULT_INJECTION and CONFIG_FAULT_INJECTION_DEBUG_FS can be set independently. Having CONFIG_FAULT_INJECTION set and CONFIG_FAULT_INJECTION_DEBUG_FS reset causes fault_create_debugfs_attr() to return an error. The debugfs.c routines tolerate failures, but the module unload panics dereferencing a NULL in the two exit routines. If that is fixed, the dir passed to debugfs_remove_recursive comes from a memory location that was freed and potentially reused causing a segfault or corrupting memory. Here is an example of the NULL deref panic: [66866.286829] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 [66866.295602] IP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] [66866.301138] PGD 858496067 P4D 858496067 PUD 8433a7067 PMD 0 [66866.307452] Oops: 0000 [#1] SMP [66866.310953] Modules linked in: hfi1(-) rdmavt rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm iw_cm ib_cm ib_core rpcsec_gss_krb5 nfsv4 dns_resolver nfsv3 nfs fscache sb_edac x86_pkg_temp_thermal intel_powerclamp vfat fat coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel iTCO_wdt iTCO_vendor_support crypto_simd mei_me glue_helper cryptd mxm_wmi ipmi_si pcspkr lpc_ich sg mei ioatdma ipmi_devintf i2c_i801 mfd_core shpchp ipmi_msghandler wmi acpi_power_meter acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt igb fb_sys_fops ttm ahci ptp crc32c_intel libahci pps_core drm dca libata i2c_algo_bit i2c_core [last unloaded: opa_vnic] [66866.385551] CPU: 8 PID: 7470 Comm: rmmod Not tainted 4.14.0-mam-tid-rdma #2 [66866.393317] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [66866.405252] task: ffff88084f28c380 task.stack: ffffc90008454000 [66866.411866] RIP: 0010:hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] [66866.417984] RSP: 0018:ffffc90008457da0 EFLAGS: 00010202 [66866.423812] RAX: 0000000000000000 RBX: ffff880857de0000 RCX: 0000000180040001 [66866.431773] RDX: 0000000180040002 RSI: ffffea0021088200 RDI: 0000000040000000 [66866.439734] RBP: ffffc90008457da8 R08: ffff88084220e000 R09: 0000000180040001 [66866.447696] R10: 000000004220e001 R11: ffff88084220e000 R12: ffff88085a31c000 [66866.455657] R13: ffffffffa07c9820 R14: ffffffffa07c9890 R15: ffff881059d78100 [66866.463618] FS: 00007f6876047740(0000) GS:ffff88085f800000(0000) knlGS:0000000000000000 [66866.472644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66866.479053] CR2: 0000000000000088 CR3: 0000000856357006 CR4: 00000000001606e0 [66866.487013] Call Trace: [66866.489747] remove_one+0x1f/0x220 [hfi1] [66866.494221] pci_device_remove+0x39/0xc0 [66866.498596] device_release_driver_internal+0x141/0x210 [66866.504424] driver_detach+0x3f/0x80 [66866.508409] bus_remove_driver+0x55/0xd0 [66866.512784] driver_unregister+0x2c/0x50 [66866.517164] pci_unregister_driver+0x2a/0xa0 [66866.521934] hfi1_mod_cleanup+0x10/0xaa2 [hfi1] [66866.526988] SyS_delete_module+0x171/0x250 [66866.531558] do_syscall_64+0x67/0x1b0 [66866.535644] entry_SYSCALL64_slow_path+0x25/0x25 [66866.540792] RIP: 0033:0x7f6875525c27 [66866.544777] RSP: 002b:00007ffd48528e78 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [66866.553224] RAX: ffffffffffffffda RBX: 0000000001cc01d0 RCX: 00007f6875525c27 [66866.561185] RDX: 00007f6875596000 RSI: 0000000000000800 RDI: 0000000001cc0238 [66866.569146] RBP: 0000000000000000 R08: 00007f68757e9060 R09: 00007f6875596000 [66866.577120] R10: 00007ffd48528c00 R11: 0000000000000206 R12: 00007ffd48529db4 [66866.585080] R13: 0000000000000000 R14: 0000000001cc01d0 R15: 0000000001cc0010 [66866.593040] Code: 90 0f 1f 44 00 00 48 83 3d a3 8b 03 00 00 55 48 89 e5 53 48 89 fb 74 4e 48 8d bf 18 0c 00 00 e8 9d f2 ff ff 48 8b 83 20 0c 00 00 <48> 8b b8 88 00 00 00 e8 2a 21 b3 e0 48 8b bb 20 0c 00 00 e8 0e [66866.614127] RIP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] RSP: ffffc90008457da0 [66866.621885] CR2: 0000000000000088 [66866.625618] ---[ end trace c4817425783fb092 ]--- Fix by insuring that upon failure from fault_create_debugfs_attr() the parent pointer for the routines is always set to NULL and guards added in the exit routines to insure that debugfs_remove_recursive() is not called when when the parent pointer is NULL. Fixes: 0181ce31 ("IB/hfi1: Add receive fault injection feature") Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by:
-
Max Gurtovoy authored
commit 0e12af84 upstream. A copy/paste bug (probably) caused setting of an app_tag check mask in case where a ref_tag check was needed. Fixes: 38a2d0d4 ("IB/isert: convert to the generic RDMA READ/WRITE API") Fixes: 9e961ae7 ("IB/isert: Support T10-PI protected transactions") Cc: stable@vger.kernel.org Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Alex Estrin authored
commit 763b6965 upstream. The following error message occurs on a target host in a debug build during session login: [ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0 [ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes] ......snip ..... [ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015 [ 3524.555740] Call Trace: [ 3524.559102] [<ffffffffa5fe915b>] dump_stack+0x19/0x1b [ 3524.565477] [<ffffffffa58a2f58>] __warn+0xd8/0x100 [ 3524.571557] [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 3524.578610] [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0 [ 3524.585177] [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0 [ 3524.592812] [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90 [ 3524.601029] [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20 [ 3524.608574] [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80 [ 3524.616699] [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140 [ 3524.623567] [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert] [ 3524.633060] [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert] [ 3524.641383] [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430 [ 3524.648561] [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod] [ 3524.658557] [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod] [ 3524.668084] [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60 [ 3524.674420] [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod] [ 3524.684656] [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod] [ 3524.694901] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.705446] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.715976] [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod] [ 3524.725739] [<ffffffffa58d60ff>] kthread+0xef/0x100 [ 3524.732007] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.739540] [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21 [ 3524.747558] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]--- [ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION. The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it with dma-mapped address. login_tx_desc is a part of iser_conn structure and is used only once during login negotiation, so the issue is fixed by eliminating dma_sync call for this buffer using a special case routine. Cc: <stable@vger.kernel.org> Reviewed-by:
Don Dutile <ddutile@redhat.com> Signed-off-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
-
Erez Shitrit authored
commit 7b74a83c upstream. On fatal error the driver simulates CQE's for ULPs that rely on completion of all their posted work-request. For the GSI traffic, the mlx5 has its own mechanism that sends the completions via software CQE's directly to the relevant CQ. This should be kept in fatal error too, so the driver should simulate such CQE's with the specified error state in order to complete GSI QP work requests. Without the fix the next deadlock might appears: schedule_timeout+0x274/0x350 wait_for_common+0xec/0x240 mcast_remove_one+0xd0/0x120 [ib_core] ib_unregister_device+0x12c/0x230 [ib_core] mlx5_ib_remove+0xc4/0x270 [mlx5_ib] mlx5_detach_device+0x184/0x1a0 [mlx5_core] mlx5_unload_one+0x308/0x340 [mlx5_core] mlx5_pci_err_detected+0x74/0xe0 [mlx5_core] Cc: <stable@vger.kernel.org> # 4.7 Fixes: 89ea94a7 ("IB/mlx5: Reset flow support for IB kernel ULPs") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
commit 08bb558a upstream. Make the MR writability flags check, which is performed in umem.c, a static inline function in file ib_verbs.h This allows the function to be used by low-level infiniband drivers. Cc: <stable@vger.kernel.org> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jack Morgenstein authored
commit d8f9cc32 upstream. To allow rereg_user_mr to modify the MR from read-only to writable without using get_user_pages again, we needed to define the initial MR as writable. However, this was originally done unconditionally, without taking into account the writability of the underlying virtual memory. As a result, any attempt to register a read-only MR over read-only virtual memory failed. To fix this, do not add the writable flag bit when the user virtual memory is not writable (e.g. const memory). However, when the underlying memory is NOT writable (and we therefore do not define the initial MR as writable), the IB core adds a "force writable" flag to its user-pages request. If this succeeds, the reg_user_mr caller gets a writable copy of the original pages. If the user-space caller then does a rereg_user_mr operation to enable writability, this will succeed. This should not be allowed, since the original virtual memory was not writable. Cc: <stable@vger.kernel.org> Fixes: 9376932d ("IB/mlx4_ib: Add support for user MR re-registration") Signed-off-by:
-
Alex Estrin authored
commit 8d3e7113 upstream. A warm restart will fail to unload the driver, leaving link state potentially flapping up to the point the BIOS resets the adapter. Correct the issue by hooking the shutdown pci method, which will bring port down. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
-
Mike Marciniszyn authored
commit 0252f733 upstream. The following error occurs in a debug build when running MPI PSM: [ 307.415911] WARNING: CPU: 4 PID: 23867 at lib/dma-debug.c:1158 check_unmap+0x4ee/0xa20 [ 307.455661] ib_qib 0000:05:00.0: DMA-API: device driver failed to check map error[device address=0x00000000df82b000] [size=4096 bytes] [mapped as page] [ 307.517494] Modules linked in: [ 307.531584] ib_isert iscsi_target_mod ib_srpt target_core_mod rpcrdma sunrpc ib_srp scsi_transport_srp scsi_tgt ib_iser libiscsi ib_ipoib scsi_transport_iscsi rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_qib intel_powerclamp coretemp rdmavt intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel ipmi_ssif ib_core aesni_intel sg ipmi_si lrw gf128mul dca glue_helper ipmi_devintf iTCO_wdt gpio_ich hpwdt iTCO_vendor_support ablk_helper hpilo acpi_power_meter cryptd ipmi_msghandler ie31200_edac shpchp pcc_cpufreq lpc_ich pcspkr ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci crct10dif_pclmul crct10dif_common drm crc32c_intel libahci tg3 libata serio_raw ptp i2c_core [ 307.846113] pps_core dm_mirror dm_region_hash dm_log dm_mod [ 307.866505] CPU: 4 PID: 23867 Comm: mpitests-IMB-MP Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 307.911178] Hardware name: HP ProLiant DL320e Gen8, BIOS J05 11/09/2013 [ 307.944206] Call Trace: [ 307.956973] [<ffffffffbd9e915b>] dump_stack+0x19/0x1b [ 307.982201] [<ffffffffbd2a2f58>] __warn+0xd8/0x100 [ 308.005999] [<ffffffffbd2a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 308.034260] [<ffffffffbd5f667e>] check_unmap+0x4ee/0xa20 [ 308.060801] [<ffffffffbd41acaa>] ? page_add_file_rmap+0x2a/0x1d0 [ 308.090689] [<ffffffffbd5f6c4d>] debug_dma_unmap_page+0x9d/0xb0 [ 308.120155] [<ffffffffbd4082e0>] ? might_fault+0xa0/0xb0 [ 308.146656] [<ffffffffc07761a5>] qib_tid_free.isra.14+0x215/0x2a0 [ib_qib] [ 308.180739] [<ffffffffc0776bf4>] qib_write+0x894/0x1280 [ib_qib] [ 308.210733] [<ffffffffbd540b00>] ? __inode_security_revalidate+0x70/0x80 [ 308.244837] [<ffffffffbd53c2b7>] ? security_file_permission+0x27/0xb0 [ 308.266025] qib_ib0.8006: multicast join failed for ff12:401b:8006:0000:0000:0000:ffff:ffff, status -22 [ 308.323421] [<ffffffffbd46f5d3>] vfs_write+0xc3/0x1f0 [ 308.347077] [<ffffffffbd492a5c>] ? fget_light+0xfc/0x510 [ 308.372533] [<ffffffffbd47045a>] SyS_write+0x8a/0x100 [ 308.396456] [<ffffffffbd9ff355>] system_call_fastpath+0x1c/0x21 The code calls a qib_map_page() which has never correctly tested for a mapping error. Fix by testing for pci_dma_mapping_error() in all cases and properly handling the failure in the caller. Additionally, streamline qib_map_page() arguments to satisfy just the single caller. Cc: <stable@vger.kernel.org> Reviewed-by:
-
Tadeusz Struk authored
commit 3ab2011e upstream. There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Tadeusz Struk authored
commit 8c81c247 upstream. If load context command returns with TPM2_RC_HANDLE or TPM2_RC_REFERENCE_H0 then we have use after free in line 114 and double free in 117. Fixes: 4d57856a ("tpm2: add session handle context saving and restoring to the space code") Cc: stable@vger.kernel.org Signed-off-by:
-
Srinivas Kandagatla authored
commit 522811e9 upstream. Immediately after the platform_device_unregister() the device will be cleaned up. Accessing the freed pointer immediately after that will crash the system. Found this bug when kernel is built with CONFIG_PAGE_POISONING and testing loading/unloading audio drivers in a loop on Qcom platforms. Fix this by moving of_node_clear_flag() just before the unregister calls. Below is the crash trace: Unable to handle kernel paging request at virtual address 6b6b6b6b6b6c03 Mem abort info: ESR = 0x96000021 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000021 CM = 0, WnR = 0 [006b6b6b6b6b6c03] address between user and kernel address ranges Internal error: Oops: 96000021 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1784 Comm: sh Tainted: G W 4.17.0-rc7-02230-ge3a63a7ef641-dirty #204 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_bit+0x18/0x2c lr : of_platform_device_destroy+0x64/0xb8 sp : ffff00000c9c3930 x29: ffff00000c9c3930 x28: ffff80003d39b200 x27: ffff000008bb1000 x26: 0000000000000040 x25: 0000000000000124 x24: ffff80003a9a3080 x23: 0000000000000060 x22: ffff00000939f518 x21: ffff80003aa79e98 x20: ffff80003aa3dae0 x19: ffff80003aa3c890 x18: ffff800009feb794 x17: 0000000000000000 x16: 0000000000000000 x15: ffff800009feb790 x14: 0000000000000000 x13: ffff80003a058778 x12: ffff80003a058728 x11: ffff80003a058750 x10: 0000000000000000 x9 : 0000000000000006 x8 : ffff80003a825988 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000008 x2 : 0000000000000001 x1 : 6b6b6b6b6b6b6c03 x0 : 0000000000000000 Process sh (pid: 1784, stack limit = 0x (ptrval)) Call trace: clear_bit+0x18/0x2c q6afe_remove+0x20/0x38 apr_device_remove+0x30/0x70 device_release_driver_internal+0x170/0x208 device_release_driver+0x14/0x20 bus_remove_device+0xcc/0x150 device_del+0x10c/0x310 device_unregister+0x1c/0x70 apr_remove_device+0xc/0x18 device_for_each_child+0x50/0x80 apr_remove+0x18/0x20 rpmsg_dev_remove+0x38/0x68 device_release_driver_internal+0x170/0x208 device_release_driver+0x14/0x20 bus_remove_device+0xcc/0x150 device_del+0x10c/0x310 device_unregister+0x1c/0x70 qcom_smd_remove_device+0xc/0x18 device_for_each_child+0x50/0x80 qcom_smd_unregister_edge+0x3c/0x70 smd_subdev_remove+0x18/0x28 rproc_stop+0x48/0xd8 rproc_shutdown+0x60/0xe8 state_store+0xbc/0xf8 dev_attr_store+0x18/0x28 sysfs_kf_write+0x3c/0x50 kernfs_fop_write+0x118/0x1e0 __vfs_write+0x18/0x110 vfs_write+0xa4/0x1a8 ksys_write+0x48/0xb0 sys_write+0xc/0x18 el0_svc_naked+0x30/0x34 Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) ---[ end trace 32020935775616a2 ]--- Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Stefan M Schaeckeler authored
commit 3b9cf790 upstream. For strings, account for trailing \0 in property length field: This is consistent with how dtc builds string properties. Function __of_prop_dup() would misbehave on such properties as it duplicates properties based on the property length field creating new string values without trailing \0s. Signed-off-by:
Stefan M Schaeckeler <sschaeck@cisco.com> Reviewed-by:
Frank Rowand <frank.rowand@sony.com> Tested-by:
-
Frank Rowand authored
commit 482137bf upstream. The smatch static checker marks the data in offset as untrusted, leading it to warn: drivers/of/resolver.c:125 update_usages_of_a_phandle_reference() error: buffer underflow 'prop->value' 's32min-s32max' Add check to verify that offset is within the property data. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jerome Brunet authored
commit d5b4885b upstream. There is a problem with the sd-uhs mode when doing a soft reboot. Switching back from 1.8v to 3.3v messes with the card, which no longer respond (timeout errors). According to the specification, we should perform a card reset (power cycling the card) but this is something we cannot control on this design. Then the only solution to restore the communication with the card is an "unplug-plug" which is not acceptable Until we find a solution, if any, disable the sd-uhs modes on this design. For the people using uhs at the moment, there will a performance drop as a result. Fixes: 3cde63eb ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Will Deacon authored
commit 71c8fc0c upstream. When rewriting swapper using nG mappings, we must performance cache maintenance around each page table access in order to avoid coherency problems with the host's cacheable alias under KVM. To ensure correct ordering of the maintenance with respect to Device memory accesses made with the Stage-1 MMU disabled, DMBs need to be added between the maintenance and the corresponding memory access. This patch adds a missing DMB between writing a new page table entry and performing a clean+invalidate on the same line. Fixes: f992b4df ("arm64: kpti: Add ->enable callback to remap swapper using nG mappings") Cc: <stable@vger.kernel.org> # 4.16.x- Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
commit b5b7dd64 upstream. We inspect __kpti_forced early on as part of the cpufeature enable callback which remaps the swapper page table using non-global entries. Ensure that __kpti_forced has been updated to reflect the kpti= command-line option before we start using it. Fixes: ea1e3de8 ("arm64: entry: Add fake CPU feature for unmapping the kernel at EL0") Cc: <stable@vger.kernel.org> # 4.16.x- Reported-by:
Wei Xu <xuwei5@hisilicon.com> Tested-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
-
Dave Martin authored
commit 0fe42512 upstream. Commit 17c28958 ("arm64: Abstract syscallno manipulation") abstracts out the pt_regs.syscallno value for a syscall cancelled by a tracer as NO_SYSCALL, and provides helpers to set and check for this condition. However, the way this was implemented has the unintended side-effect of disabling part of the syscall restart logic. This comes about because the second in_syscall() check in do_signal() re-evaluates the "in a syscall" condition based on the updated pt_regs instead of the original pt_regs. forget_syscall() is explicitly called prior to the second check in order to prevent restart logic in the ret_to_user path being spuriously triggered, which means that the second in_syscall() check always yields false. This triggers a failure in tools/testing/selftests/seccomp/seccomp_bpf.c, when using ptrace to suppress a signal that interrups a nanosleep() syscall. Misbehaviour of this type is only expected in the case where a tracer suppresses a signal and the target process is either being single-stepped or the interrupted syscall attempts to restart via -ERESTARTBLOCK. This patch restores the old behaviour by performing the in_syscall() check only once at the start of the function. Fixes: 17c28958 ("arm64: Abstract syscallno manipulation") Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Reported-by:
Sumit Semwal <sumit.semwal@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 4.14.x- Signed-off-by:
-
Dinh Nguyen authored
commit 3877ef7a upstream. The NAND compatible "denali,denal-nand-dt" property has never been used and is obsolete. Remove it. Cc: stable@vger.kernel.org Fixes: f549af06("ARM: dts: socfpga: Add NAND device tree for Arria10") Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Marek Vasut authored
commit 4eda9b76 upstream. The Denali NAND x-clock should be supplied by nand_x_clk, not by nand_clk. Fix this, otherwise the Denali driver gets incorrect clock frequency information and incorrectly configures the NAND timing. Cc: stable@vger.kernel.org Signed-off-by:
Marek Vasut <marex@denx.de> Fixes: d837a80d ("ARM: dts: socfpga: add nand controller nodes") Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by:
-
Marek Vasut authored
commit d9a695f3 upstream. The compatible string for the Denali NAND controller is incorrect, fix it by replacing it with one matching the DT bindings and the driver. Cc: stable@vger.kernel.org Signed-off-by:
-
Thor Thayer authored
commit 975ba94c upstream. Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable@vger.kernel.org Fixes: f2d6f8f8 ("ARM: dts: socfpga: Add SPI Master1 for Arria10 SR chip") Signed-off-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
David Rivshin authored
commit 76ed0b80 upstream. NUMREGBYTES (which is used as the size for gdb_regs[]) is incorrectly based on DBG_MAX_REG_NUM instead of GDB_MAX_REGS. DBG_MAX_REG_NUM is the number of total registers, while GDB_MAX_REGS is the number of 'unsigned longs' it takes to serialize those registers. Since FP registers require 3 'unsigned longs' each, DBG_MAX_REG_NUM is smaller than GDB_MAX_REGS. This causes GDB 8.0 give the following error on connect: "Truncated register 19 in remote 'g' packet" This also causes the register serialization/deserialization logic to overflow gdb_regs[], overwriting whatever follows. Fixes: 834b2964 ("kgdb,arm: fix register dump") Cc: <stable@vger.kernel.org> # 2.6.37+ Signed-off-by:
David Rivshin <drivshin@allworx.com> Acked-by:
Rabin Vincent <rabin@rab.in> Tested-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Vaibhav Jain authored
commit b6c84ba2 upstream. Currently we see a kernel-oops reported on Power-9 while attaching a context to an AFU, with radix-mode and sysfs attr 'prefault_mode' set to anything other than 'none'. The backtrace of the oops is of this form: Unable to handle kernel paging request for data at address 0x00000080 Faulting instruction address: 0xc00800000bcf3b20 cpu 0x1: Vector: 300 (Data Access) at [c00000037f003800] pc: c00800000bcf3b20: cxl_load_segment+0x178/0x290 [cxl] lr: c00800000bcf39f0: cxl_load_segment+0x48/0x290 [cxl] sp: c00000037f003a80 msr: 9000000000009033 dar: 80 dsisr: 40000000 current = 0xc00000037f280000 paca = 0xc0000003ffffe600 softe: 3 irq_happened: 0x01 pid = 3529, comm = afp_no_int <snip> cxl_prefault+0xfc/0x248 [cxl] process_element_entry_psl9+0xd8/0x1a0 [cxl] cxl_attach_dedicated_process_psl9+0x44/0x130 [cxl] native_attach_process+0xc0/0x130 [cxl] afu_ioctl+0x3f4/0x5e0 [cxl] do_vfs_ioctl+0xdc/0x890 ksys_ioctl+0x68/0xf0 sys_ioctl+0x40/0xa0 system_call+0x58/0x6c The issue is caused as on Power-8 the AFU attr 'prefault_mode' was used to improve initial storage fault performance by prefaulting process segments. However on Power-9 with radix mode we don't have Storage-Segments that we can prefault. Also prefaulting process Pages will be too costly and fine-grained. Hence, since the prefaulting mechanism doesn't makes sense of radix-mode, this patch updates prefault_mode_store() to not allow any other value apart from CXL_PREFAULT_NONE when radix mode is enabled. Fixes: f24be42a ("cxl: Add psl9 specific code") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Finley Xiao authored
commit 9e59c5f6 upstream. Solve the pd could only ever turn off but never turn them on again, if the pd registers have the writemask bits. So far this affects the rk3328 only. Fixes: 79bb17ce ("soc: rockchip: power-domain: Support domain control in hiword-registers") Cc: stable@vger.kernel.org Signed-off-by:
Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by:
Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Mahesh Salgaonkar authored
commit 722cde76 upstream. Unregister fadump on kexec down path otherwise the fadump registration in new kexec-ed kernel complains that fadump is already registered. This makes new kernel to continue using fadump registered by previous kernel which may lead to invalid vmcore generation. Hence this patch fixes this issue by un-registering fadump in fadump_cleanup() which is called during kexec path so that new kernel can register fadump with new valid values. Fixes: b500afff ("fadump: Invalidate registration and release reserved memory for general use.") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Gautham R. Shenoy authored
commit 0a4ec6aa upstream. The commit 78eaa10f ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state") introduced a timeout for the snooze idle state so that it could be eventually be promoted to a deeper idle state. The snooze timeout value is static and set to the target residency of the next idle state, which would train the cpuidle governor to pick the next idle state eventually. The unfortunate side-effect of this is that if the next idle state(s) is disabled, the CPU will forever remain in snooze, despite the fact that the system is completely idle, and other deeper idle states are available. This patch fixes the issue by dynamically setting the snooze timeout to the target residency of the next enabled state on the device. Before Patch: POWER8 : Only nap disabled. $ cpupower monitor sleep 30 sleep took 30.01297 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | Nap | Fast 0| 8| 0| 96.41| 0.00| 0.00 0| 8| 1| 96.43| 0.00| 0.00 0| 8| 2| 96.47| 0.00| 0.00 0| 8| 3| 96.35| 0.00| 0.00 0| 8| 4| 96.37| 0.00| 0.00 0| 8| 5| 96.37| 0.00| 0.00 0| 8| 6| 96.47| 0.00| 0.00 0| 8| 7| 96.47| 0.00| 0.00 POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1, stop2) disabled: $ cpupower monitor sleep 30 sleep took 30.05033 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop 0| 16| 0| 89.79| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 1| 90.12| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 2| 90.21| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 3| 90.29| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 After Patch: POWER8 : Only nap disabled. $ cpupower monitor sleep 30 sleep took 30.01200 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | Nap | Fast 0| 8| 0| 16.58| 0.00| 77.21 0| 8| 1| 18.42| 0.00| 75.38 0| 8| 2| 4.70| 0.00| 94.09 0| 8| 3| 17.06| 0.00| 81.73 0| 8| 4| 3.06| 0.00| 95.73 0| 8| 5| 7.00| 0.00| 96.80 0| 8| 6| 1.00| 0.00| 98.79 0| 8| 7| 5.62| 0.00| 94.17 POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1, stop2) disabled: $ cpupower monitor sleep 30 sleep took 30.02110 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop 0| 0| 0| 0.69| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 9.39| 89.70 0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.05| 93.21 0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 89.93 0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 93.26 Fixes: 78eaa10f ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Akshay Adiga authored
commit ac9816dc upstream. Init all present cpus for deep states instead of "all possible" cpus. Init fails if a possible cpu is guarded. Resulting in making only non-deep states available for cpuidle/hotplug. Stewart says, this means that for single threaded workloads, if you guard out a CPU core you'll not get WoF (Workload Optimised Frequency), which means that performance goes down when you wouldn't expect it to. Fixes: 77b54e9f ("powernv/powerpc: Add winkle support for offline cpus") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by:
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Signed-off-by:
-
Haren Myneni authored
commit 75743649 upstream. NX can set the 3rd bit in CR register for XER[SO] (Summary overflow) which is not related to paste request. The current paste function returns failure for a successful request when this bit is set. So mask this bit and check the proper return status. Fixes: 2392c8c8 ("powerpc/powernv/vas: Define copy/paste interfaces") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Haren Myneni <haren@us.ibm.com> Signed-off-by:
-
