Daniel Borkmann says:

====================
pull-request: bpf 2017-11-23

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Several BPF offloading fixes, from Jakub. Among others:

    - Limit offload to cls_bpf and XDP program types only.
    - Move device validation into the driver and don't make
      any assumptions about the device in the classifier due
      to shared blocks semantics.
    - Don't pass offloaded XDP program into the driver when
      it should be run in native XDP instead. Offloaded ones
      are not JITed for the host in such cases.
    - Don't destroy device offload state when moved to
      another namespace.
    - Revert dumping offload info into user space for now,
      since ifindex alone is not sufficient. This will be
      redone properly for bpf-next tree.

2) Fix test_verifier to avoid using bpf_probe_write_user()
   helper in test cases, since it's dumping a warning into
   kernel log which may confuse users when only running tests.
   Switch to use bpf_trace_printk() instead, from Yonghong.

3) Several fixes for correcting ARG_CONST_SIZE_OR_ZERO semantics
   before it becomes uabi, from Gianluca. More specifically:

    - Add a type ARG_PTR_TO_MEM_OR_NULL that is used only
      by bpf_csum_diff(), where the argument is either a
      valid pointer or NULL. The subsequent ARG_CONST_SIZE_OR_ZERO
      then enforces a valid pointer in case of non-0 size
      or a valid pointer or NULL in case of size 0. Given
      that, the semantics for ARG_PTR_TO_MEM in combination
      with ARG_CONST_SIZE_OR_ZERO are now such that in case
      of size 0, the pointer must always be valid and cannot
      be NULL. This fix in semantics allows for bpf_probe_read()
      to drop the recently added size == 0 check in the helper
      that would become part of uabi otherwise once released.
      At the same time we can then fix bpf_probe_read_str() and
      bpf_perf_event_output() to use ARG_CONST_SIZE_OR_ZERO
      instead of ARG_CONST_SIZE in order to fix recently
      reported issues by Arnaldo et al, where LLVM optimizes
      two boundary checks into a single one for unknown
      variables where the verifier looses track of the variable
      bounds and thus rejects valid programs otherwise.

4) A fix for the verifier for the case when it detects
   comparison of two constants where the branch is guaranteed
   to not be taken at runtime. Verifier will rightfully prune
   the exploration of such paths, but we still pass the program
   to JITs, where they would complain about using reserved
   fields, etc. Track such dead instructions and sanitize
   them with mov r0,r0. Rejection is not possible since LLVM
   may generate them for valid C code and doesn't do as much
   data flow analysis as verifier. For bpf-next we might
   implement removal of such dead code and adjust branches
   instead. Fix from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Tuntap and similar devices can inject GSO packets. Accept type
VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively.

Processes are expected to use feature negotiation such as TUNSETOFFLOAD
to detect supported offload types and refrain from injecting other
packets. This process breaks down with live migration: guest kernels
do not renegotiate flags, so destination hosts need to expose all
features that the source host does.

Partially revert the UFO removal from 182e0b6b~1..d9d30adf.
This patch introduces nearly(*) no new code to simplify verification.
It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP
insertion and software UFO segmentation.

It does not reinstate protocol stack support, hardware offload
(NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception
of VIRTIO_NET_HDR_GSO_UDP packets in tuntap.

To support SKB_GSO_UDP reappearing in the stack, also reinstate
logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD
by squashing in commit 93991221 ("net: skb_needs_check() removes
CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee6
("net: avoid skb_warn_bad_offload false positives on UFO").

(*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id,
ipv6_proxy_select_ident is changed to return a __be32 and this is
assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted
at the end of the enum to minimize code churn.

Tested
  Booted a v4.13 guest kernel with QEMU. On a host kernel before this
  patch `ethtool -k eth0` shows UFO disabled. After the patch, it is
  enabled, same as on a v4.13 host kernel.

  A UFO packet sent from the guest appears on the tap device:
    host:
      nc -l -p -u 8000 &
      tcpdump -n -i tap0

    guest:
      dd if=/dev/zero of=payload.txt bs=1 count=2000
      nc -u 192.16.1.1 8000 < payload.txt

  Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds,
  packets arriving fragmented:

    ./with_tap_pair.sh ./tap_send_ufo tap0 tap1
    (from https://github.com/wdebruij/kerneltools/tree/master/tests)

Changes
  v1 -> v2
    - simplified set_offload change (review comment)
    - documented test procedure

Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com>
Fixes: fb652fdf ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6fa1ba61 partially
implemented the new ethtool API, by replacing get_settings()
with get_link_ksettings(). This breaks ethtool, since the
userspace tool (according to the new API specs) never tries
the legacy set() call, when the new get() call succeeds.

All attempts to chance some setting from userspace result in:
> Cannot set new settings: Operation not supported

Implement the missing set() call.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian reported a breakage with anycast routes due to commit
4832c30d ("net: ipv6: put host and anycast routes on device with
address"). Prior to this commit anycast routes were added against the
loopback device causing repetitive route entries with no insight into
why they existed. e.g.:
  $ ip -6 ro ls  table local type anycast
  anycast 2001:db8:1:: dev lo proto kernel metric 0 pref medium
  anycast 2001:db8:2:: dev lo proto kernel metric 0 pref medium
  anycast fe80:: dev lo proto kernel metric 0 pref medium
  anycast fe80:: dev lo proto kernel metric 0 pref medium

The point of commit 4832c30d is to add the routes using the device
with the address which is causing the route to be added. e.g.,:
  $ ip -6 ro ls  table local type anycast
  anycast 2001:db8:1:: dev eth1 proto kernel metric 0 pref medium
  anycast 2001:db8:2:: dev eth2 proto kernel metric 0 pref medium
  anycast fe80:: dev eth2 proto kernel metric 0 pref medium
  anycast fe80:: dev eth1 proto kernel metric 0 pref medium

For traffic to work as it did before, the dst device needs to be switched
to the loopback when the copy is created similar to local routes.

Fixes: 4832c30d ("net: ipv6: put host and anycast routes on device with address")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: fixes for smc buffer handling

here are 2 cleanup patches for smc buffer handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

With gcc-4.1.2:

    net/smc/smc_core.c: In function ‘__smc_buf_create’:
    net/smc/smc_core.c:567: warning: ‘bufsize’ may be used uninitialized in this function

Indeed, if the for-loop is never executed, bufsize is used
uninitialized.  In addition, buf_desc is stored for later use, while it
is still a NULL pointer.

Before, error handling was done by checking if buf_desc is non-NULL.
The cleanup changed this to an error check, but forgot to update the
preinitialization of buf_desc to an error pointer.

Update the preinitializatin of buf_desc to fix this.

Fixes: b33982c3 ("net/smc: cleanup function __smc_buf_create()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 3e034725 ("net/smc: common functions for RMBs and send buffers")
merged handling of SMC receive and send buffers. It introduced sk_buf_size
as merged start value for size determination. But since sk_buf_size is not
used at all, sk_sndbuf is erroneously used as start for rmb creation.
This patch makes sure, sk_buf_size is really used as intended, and
sk_rcvbuf is used as start value for rmb creation.

Fixes: 3e034725 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the 'ignore_routes_with_linkdown' sysctl is set, we should not
consider linkdown nexthops during route lookup.

While the code correctly verifies that the initially selected route
('match') has a carrier, it does not perform the same check in the
subsequent multipath selection, resulting in a potential packet loss.

In case the chosen route does not have a carrier and the sysctl is set,
choose the initially selected route.

Fixes: 35103d11 ("net: ipv6 sysctl option to ignore routes when nexthop link is down")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

If you flush (delete) a filter chain other than chain 0 (such as when
deleting the device), the kernel may run into a use-after-free. The
chain refcount must not be decremented unless we are sure we are done
with the chain.

To reproduce the bug, run:
    ip link add dtest type dummy
    tc qdisc add dev dtest ingress
    tc filter add dev dtest chain 1  parent ffff: flower
    ip link del dtest

Introduced in: commit f93e1cdc ("net/sched: fix filter flushing"),
but unless you have KAsan or luck, you won't notice it until
commit 0dadc117 ("cls_flower: use tcf_exts_get_net() before call_rcu()")

Fixes: f93e1cdc ("net/sched: fix filter flushing")
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Roman Kapl <code@rkapl.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/net/phy/cortina.o
see include/linux/module.h for more information

This adds the license as "GPL", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

when the verifier detects that register contains a runtime constant
and it's compared with another constant it will prune exploration
of the branch that is guaranteed not to be taken at runtime.
This is all correct, but malicious program may be constructed
in such a way that it always has a constant comparison and
the other branch is never taken under any conditions.
In this case such path through the program will not be explored
by the verifier. It won't be taken at run-time either, but since
all instructions are JITed the malicious program may cause JITs
to complain about using reserved fields, etc.
To fix the issue we have to track the instructions explored by
the verifier and sanitize instructions that are dead at run time
with NOPs. We cannot reject such dead code, since llvm generates
it for valid C code, since it doesn't do as much data flow
analysis as the verifier does.

Fixes: 17a52670 ("bpf: verifier (add verifier core)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Gianluca Borello says:

====================
This set includes some fixes in semantics and usability issues that emerged
recently, and would be good to have them in net before the next release.

In particular, ARG_CONST_SIZE_OR_ZERO semantics was recently changed in
commit 9fd29c08 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO
semantics") with the goal of letting the compiler generate simpler code
that the verifier can more easily accept.

To handle this change in semantics, a few checks in some helpers were
added, like in commit 9c019e2b ("bpf: change helper bpf_probe_read arg2
type to ARG_CONST_SIZE_OR_ZERO"), and those checks are less than ideal
because once they make it into a released kernel bpf programs can start
relying on them, preventing the possibility of being removed later on.

This patch tries to fix the issue by introducing a new argument type
ARG_PTR_TO_MEM_OR_NULL that can be used for helpers that can receive a
<NULL, 0> tuple. By doing so, we can fix the semantics of the other helpers
that don't need <NULL, 0> and can just handle <!NULL, 0>, allowing the code
to get rid of those checks.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit 9fd29c08 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO
semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way
the compiler generates optimized BPF code when checking boundaries of an
argument from C code. A typical example of this optimized code can be
generated using the bpf_perf_event_output helper when operating on variable
memory:

/* len is a generic scalar */
if (len > 0 && len <= 0x7fff)
        bpf_perf_event_output(ctx, &perf_map, 0, buf, len);

110: (79) r5 = *(u64 *)(r10 -40)
111: (bf) r1 = r5
112: (07) r1 += -1
113: (25) if r1 > 0x7ffe goto pc+6
114: (bf) r1 = r6
115: (18) r2 = 0xffff94e5f166c200
117: (b7) r3 = 0
118: (bf) r4 = r7
119: (85) call bpf_perf_event_output#25
R5 min value is negative, either use unsigned or 'var &= const'

With this code, the verifier loses track of the variable.

Replacing arg5 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it
avoids this quite common case which leads to usability issues, and the
compiler generates code that the verifier can more easily test:

if (len <= 0x7fff)
        bpf_perf_event_output(ctx, &perf_map, 0, buf, len);

or

bpf_perf_event_output(ctx, &perf_map, 0, buf, len & 0x7fff);

No changes to the bpf_perf_event_output helper are necessary since it can
handle a case where size is 0, and an empty frame is pushed.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit 9fd29c08 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO
semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way
the compiler generates optimized BPF code when checking boundaries of an
argument from C code. A typical example of this optimized code can be
generated using the bpf_probe_read_str helper when operating on variable
memory:

/* len is a generic scalar */
if (len > 0 && len <= 0x7fff)
        bpf_probe_read_str(p, len, s);

251: (79) r1 = *(u64 *)(r10 -88)
252: (07) r1 += -1
253: (25) if r1 > 0x7ffe goto pc-42
254: (bf) r1 = r7
255: (79) r2 = *(u64 *)(r10 -88)
256: (bf) r8 = r4
257: (85) call bpf_probe_read_str#45
R2 min value is negative, either use unsigned or 'var &= const'

With this code, the verifier loses track of the variable.

Replacing arg2 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it
avoids this quite common case which leads to usability issues, and the
compiler generates code that the verifier can more easily test:

if (len <= 0x7fff)
        bpf_probe_read_str(p, len, s);

or

bpf_probe_read_str(p, len & 0x7fff, s);

No changes to the bpf_probe_read_str helper are necessary since
strncpy_from_unsafe itself immediately returns if the size passed is 0.
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit 9c019e2b ("bpf: change helper bpf_probe_read arg2 type to
ARG_CONST_SIZE_OR_ZERO") changed arg2 type to ARG_CONST_SIZE_OR_ZERO to
simplify writing bpf programs by taking advantage of the new semantics
introduced for ARG_CONST_SIZE_OR_ZERO which allows <!NULL, 0> arguments.

In order to prevent the helper from actually passing a NULL pointer to
probe_kernel_read, which can happen when <NULL, 0> is passed to the helper,
the commit also introduced an explicit check against size == 0.

After the recent introduction of the ARG_PTR_TO_MEM_OR_NULL type,
bpf_probe_read can not receive a pair of <NULL, 0> arguments anymore, thus
the check is not needed anymore and can be removed, since probe_kernel_read
can correctly handle a <!NULL, 0> call. This also fixes the semantics of
the helper before it gets officially released and bpf programs start
relying on this check.

Fixes: 9c019e2b ("bpf: change helper bpf_probe_read arg2 type to ARG_CONST_SIZE_OR_ZERO")
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

With the current ARG_PTR_TO_MEM/ARG_PTR_TO_UNINIT_MEM semantics, an helper
argument can be NULL when the next argument type is ARG_CONST_SIZE_OR_ZERO
and the verifier can prove the value of this next argument is 0. However,
most helpers are just interested in handling <!NULL, 0>, so forcing them to
deal with <NULL, 0> makes the implementation of those helpers more
complicated for no apparent benefits, requiring them to explicitly handle
those corner cases with checks that bpf programs could start relying upon,
preventing the possibility of removing them later.

Solve this by making ARG_PTR_TO_MEM/ARG_PTR_TO_UNINIT_MEM never accept NULL
even when ARG_CONST_SIZE_OR_ZERO is set, and introduce a new argument type
ARG_PTR_TO_MEM_OR_NULL to explicitly deal with the NULL case.

Currently, the only helper that needs this is bpf_csum_diff_proto(), so
change arg1 and arg3 to this new type as well.

Also add a new battery of tests that explicitly test the
!ARG_PTR_TO_MEM_OR_NULL combination: all the current ones testing the
various <NULL, 0> variations are focused on bpf_csum_diff, so cover also
other helpers.
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

There are four tests in test_verifier using bpf_probe_write_user
helper. These four tests will emit the following kernel messages
  [   12.974753] test_verifier[220] is installing a program with bpf_probe_write_user
                                    helper that may corrupt user memory!
  [   12.979285] test_verifier[220] is installing a program with bpf_probe_write_user
                                    helper that may corrupt user memory!
  ......

This may confuse certain users. This patch replaces bpf_probe_write_user
with bpf_trace_printk. The test_verifier already uses bpf_trace_printk
earlier in the test and a trace_printk warning message has been printed.
So this patch does not emit any more kernel messages.

Fixes: b6ff6391 ("bpf: fix and add test cases for ARG_CONST_SIZE_OR_ZERO semantics change")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Pull networking fixes from David Miller:

 1) Fix a reference to a module parameter which was lost during the
    GREv6 receive path rewrite, from Alexey Kodanev.

 2) Fix deref before NULL check in ipheth, from Gustavo A. R. Silva.

 3) RCU read lock imbalance in tun_build_skb(), from Xin Long.

 4) Some stragglers from the mac80211 folks:

      a) Timer conversions from Kees Cook

      b) Fix some sequencing issue when cfg80211 is built statically,
         from Johannes Berg

      c) Memory leak in mac80211_hwsim, from Ben Hutchings.

 5) Add new qmi_wwan device ID, from Sebastian Sjoholm.

 6) Fix use after free in tipc, from Jon Maloy.

 7) Missing kdoc in nfp driver, from Jakub Kicinski.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  nfp: flower: add missing kdoc
  tipc: fix access of released memory
  net: qmi_wwan: add Quectel BG96 2c7c:0296
  mlxsw: spectrum: Do not try to create non-existing ports during unsplit
  mac80211: properly free requested-but-not-started TX agg sessions
  mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()
  cfg80211: initialize regulatory keys/database later
  mac80211: aggregation: Convert timers to use timer_setup()
  nl80211: don't expose wdev->ssid for most interfaces
  mac80211: Convert timers to use timer_setup()
  net: vxge: Fix some indentation issues
  net: ena: fix race condition between device reset and link up setup
  r8169: use same RTL8111EVL green settings as in vendor driver
  r8169: fix RTL8111EVL EEE and green settings
  tun: fix rcu_read_lock imbalance in tun_build_skb
  tcp: when scheduling TLP, time of RTO should account for current ACK
  usbnet: ipheth: fix potential null pointer dereference in ipheth_carrier_set
  gre6: use log_ecn_error module parameter in ip6_tnl_rcv()

Pull orangefs updates from Mike Marshall:
 "Fix:

   - stop setting atime on inode dirty (Martin Brandenburg)

  Cleanups:

   - remove initialization of i_version (Jeff Layton)

   - use ARRAY_SIZE (Jérémy Lefaure)

   - call op_release sooner when creating inodes (Mike MarshallMartin
     Brandenburg)"

* tag 'for-linus-4.15-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: call op_release sooner when creating inodes
  orangefs: stop setting atime on inode dirty
  orangefs: use ARRAY_SIZE
  orangefs: remove initialization of i_version

Pull ceph updates from Ilya Dryomov:
 "We have a set of file locking improvements from Zheng, rbd rw/ro state
  handling code cleanup from myself and some assorted CephFS fixes from
  Jeff.

  rbd now defaults to single-major=Y, lifting the limit of ~240 rbd
  images per host for everyone"

* tag 'ceph-for-4.15-rc1' of git://github.com/ceph/ceph-client:
  rbd: default to single-major device number scheme
  libceph: don't WARN() if user tries to add invalid key
  rbd: set discard_alignment to zero
  ceph: silence sparse endianness warning in encode_caps_cb
  ceph: remove the bump of i_version
  ceph: present consistent fsid, regardless of arch endianness
  ceph: clean up spinlocking and list handling around cleanup_cap_releases()
  rbd: get rid of rbd_mapping::read_only
  rbd: fix and simplify rbd_ioctl_set_ro()
  ceph: remove unused and redundant variable dropping
  ceph: mark expected switch fall-throughs
  ceph: -EINVAL on decoding failure in ceph_mdsc_handle_fsmap()
  ceph: disable cached readdir after dropping positive dentry
  ceph: fix bool initialization/comparison
  ceph: handle 'session get evicted while there are file locks'
  ceph: optimize flock encoding during reconnect
  ceph: make lock_to_ceph_filelock() static
  ceph: keep auth cap when inode has flocks or posix locks

Pull printk updates from Petr Mladek:

 - print the warning about dropped messages on consoles on a separate
   line.   It makes it more legible.

 - one typo fix and small code clean up.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  added new line symbol after warning about dropped messages
  printk: fix typo in printk_safe.c
  printk: simplify no_printk()

Merge tag 'mac80211-for-davem-2017-11-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A few things:
 * straggler timer conversions from Kees
 * memory leak fix in hwsim
 * fix some fallout from regdb changes if wireless is built-in
 * also free aggregation sessions in startup state when station
   goes away, to avoid crashing the timer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0115552e ("nfp: remove false positive offloads
in flower vxlan") missed adding kdoc for a new parameter
of nfp_flower_add_offload().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the function tipc_group_filter_msg() finds that a member event
indicates that the member is leaving the group, it first deletes the
member instance, and then purges the message queue being handled
by the call. But the message queue is an aggregated field in the
just deleted item, leading the purge call to access freed memory.

We fix this by swapping the order of the two actions.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both
CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development
board (EVB). The USB id is added to qmi_wwan.c to allow QMI
communication with the BG96.
Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

On some systems, when we unsplit a port we need to re-create two ports
instead. On other systems, only one needs to be re-created.

Do not try to create a port if during driver initialization it was
assigned a negative module number, which is invalid.

This avoids the following error during unsplit:
[  941.012478] mlxsw_spectrum 0000:01:00.0: Port 43: Failed to map module

The error is harmless and caused by the fact that a local port is
already mapped to module 0.

Fixes: be94535f ("mlxsw: spectrum: Make split flow match firmware requirements")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here (though removal of the dead igafb
  driver stands out in diffstat).

  Summary:

   - convert timers to use timer_setup() (Kees Cook, Thierry Reding)

   - fix panels support on iMX boards in mxsfb driver (Stefan Agner)

   - fix timeout on EDID read in udlfb driver (Ladislav Michl)

   - add missing modes to fix out of bounds access in controlfb driver
     (Geert Uytterhoeven)

   - update initialisation paths in sa1100fb driver to be more robust
     (Russell King)

   - fix error handling path of ->probe method in au1200fb driver
     (Christophe JAILLET)

   - fix handling of cases when either panel or crt is defined in
     sm501fb driver (Sudip Mukherjee, Colin Ian King)

   - add ability to the Goldfish FB driver to be recognized by OS via DT
     (Aleksandar Markovic)

   - structures constifications (Bhumika Goyal)

   - misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter)

   - misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring)

   - remove dead igafb driver"

* tag 'fbdev-v4.15' of git://github.com/bzolnier/linux: (42 commits)
  OMAPFB: prevent buffer underflow in omapfb_parse_vram_param()
  video: fbdev: sm501fb: fix potential null pointer dereference on fbi
  fbcon: Initialize ops->info early
  video: fbdev: Convert timers to use timer_setup()
  video: fbdev: pxa3xx_gcu: Convert timers to use timer_setup()
  fbdev: controlfb: Add missing modes to fix out of bounds access
  video: fbdev: sis_main: mark expected switch fall-throughs
  video: fbdev: cirrusfb: mark expected switch fall-throughs
  video: fbdev: aty: radeon_pm: mark expected switch fall-throughs
  video: fbdev: sm501fb: mark expected switch fall-through in sm501fb_blank_crt
  video: fbdev: intelfb: remove redundant variables
  video/fbdev/dnfb: Use common error handling code in dnfb_probe()
  sm501fb: suspend and resume fb if it exists
  sm501fb: unregister framebuffer only if registered
  sm501fb: deallocate colormap only if allocated
  video: goldfishfb: Add support for device tree bindings
  Documentation: Add device tree binding for Goldfish FB driver
  video: udlfb: Fix read EDID timeout
  video: fbdev: remove dead igafb driver
  video: fbdev: mxsfb: fix pixelclock polarity
  ...

Pull DeviceTree fixes from Rob Herring:

 - Remove mc13892 as a trivial device

 - Improve of_find_node_by_name() documentation

 - Fix unit test dtc warnings

 - Clean-ups of USB binding documentation

 - Fix potential NULL deref in of_pci_map_rid

* tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: trivial-devices: Remove fsl,mc13892
  of: Document exactly what of_find_node_by_name() puts
  of: unittest: disable interrupts_property warning
  of: unittest: let dtc generate __local_fixups__
  dt-bindings: usb: document hub and host-controller properties
  dt-bindings: usb: clean up compatible property
  dt-bindings: usb: fix reg-property port-number range
  dt-bindings: usb: fix example hub node name
  of/pci: Fix theoretical NULL dereference

Pull jfs fixlet from Dave Kleikamp:
 "Update jfs git tree in MAINTAINERS"

* tag 'jfs-4.15-2' of git://github.com/kleikamp/linux-shaggy:
  MAINTAINERS: fix jfs tree location

Jakub Kicinski says:

====================
This series addresses some late comments and moves checking if program
has been loaded for the correct device to the drivers.  There are also
some problems with net namespaces which I didn't take into consideration.
On the kernel side we will now simply ignore namespace moves.  Since the
user space API is not reporting any namespace identification we have to
remove the ifindex until a correct way of reporting is agreed upon.

v2:
 - fix ext ack reporting for XDP (David A);
 - add Jiri's Ack.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Header implementation of bpf_prog_offload_verifier_prep() which
is used if CONFIG_NET=n should be a static inline.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This reverts commit bd601b6a ("bpf: report offload info to user
space").  The ifindex by itself is not sufficient, we should provide
information on which network namespace this ifindex belongs to.
After considering some options we concluded that it's best to just
remove this API for now, and rework it in -next.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This reverts commit 928631e0 ("bpftool: print program device bound
info").  We will remove this API and redo it right in -next.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

We are currently destroying the device offload state when device
moves to another net namespace.  This doesn't break with current
NFP code, because offload state is not used on program removal,
but it's not correct behaviour.

Ignore the device unregister notifications on namespace move.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf_prog_get_type() is identical to bpf_prog_get_type_dev(),
with false passed as attach_drv.  Instead of keeping it as
an exported symbol turn it into static inline wrapper.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently device-bound programs are not able to run on the host
to save resources (host JIT is not invoked).  Don't allow XDP
programs to be attached without the HW_MODE flag.  In theory
if program is already translated for device offload the driver
should choose to offload it instead of loading it in the driver.
However, offloading translated program may still fail resulting
in device-bound program being run on the host.

Prevent this by refusing to attach device bound programs if
XDP_FLAGS_HW_MODE is not set.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

With TC shared block changes we can't depend on correct netdev
pointer being available in cls_bpf.  Move the device validation
to the driver.  Core will only make sure that offloaded programs
are always attached in the driver (or in HW by the driver).  We
trust that drivers which implement offload callbacks will perform
necessary checks.

Moving the checks to the driver is generally a useful thing,
in practice the check should be against a switchdev instance,
not a netdev, given that most ASICs will probably allow using
the same program on many ports.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf_target_prog seems long and clunky, rename it to prog_ifindex.
We don't want to call this field just ifindex, because maps
may need a similar field in the future and bpf_attr members for
programs and maps are unnamed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

We are currently only allowing attachment of device-bound
cls_bpf and XDP programs.  Make this restriction explicit in
the BPF offload code.  This way we can potentially reuse the
ifindex field in the future.

Since XDP and cls_bpf programs can only be loaded by admin,
we can drop the explicit capability check from offload code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Offload state may get destroyed either because the device for which
it was constructed is going away, or because the refcount of bpf
program itself has reached 0.  In both of those cases we will call
__bpf_prog_offload_destroy() to unlink the offload from the device.
We may in fact call it twice, which works just fine, but we should
make clear this is intended and caution others trying to extend the
function.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>