- 29 Dec, 2016 1 commit
-
-
Zheng Li authored
ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output There is an inconsistent conditional judgement between __ip6_append_data and ip6_finish_output functions, the variable length in __ip6_append_data just include the length of application's payload and udp6 header, don't include the length of ipv6 header, but in ip6_finish_output use (skb->len > ip6_skb_dst_mtu(skb)) as judgement, and skb->len include the length of ipv6 header. That causes some particular application's udp6 payloads whose length are between (MTU - IPv6 Header) and MTU were fragmented by ip6_fragment even though the rst->dev support UFO feature. Add the length of ipv6 header to length in __ip6_append_data to keep consistent conditional judgement as ip6_finish_output for ip6 fragment. Signed-off-by: Zheng Li <james.z.li@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Dec, 2016 18 commits
-
-
Colin Ian King authored
trivial fix to spelling mistake in pr_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Augusto Mecking Caringi authored
This patch fixes the following warnings when CONFIG_PROC_FS is not set: linux/net/atm/lec.c: In function ‘lane_module_cleanup’: linux/net/atm/lec.c:1062:27: error: ‘atm_proc_root’ undeclared (first use in this function) remove_proc_entry("lec", atm_proc_root); ^ linux/net/atm/lec.c:1062:27: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes 28-12-2016 Some fixes for mlx5 core and ethernet driver. for -stable: net/mlx5: Check FW limitations on log_max_qp before setting it net/mlx5: Cancel recovery work in remove flow net/mlx5: Avoid shadowing numa_node net/mlx5: Mask destination mac value in ethtool steering rules net/mlx5: Prevent setting multicast macs for VFs net/mlx5e: Don't sync netdev state when not registered net/mlx5e: Disable netdev after close ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
Disable netdev should come after it was closed, although no harm of doing it before -hence the MLX5E_STATE_DESTROYING bit- but it is more natural this way. Fixes: 26e59d80 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
Skip setting netdev vxlan ports and netdev rx_mode on driver load when netdev is not yet registered. Synchronizing with netdev state is needed only on reset flow where the netdev remains registered for the whole reset period. This also fixes an access before initialization of net_device.addr_list_lock - which for some reason initialized on register_netdev - where we queued set_rx_mode work on driver load before netdev registration. Fixes: 26e59d80 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huy Nguyen authored
During the initial setup, the ets command is sent to firmware without checking if the HCA supports ets. This causes the invalid command error. Add the ets capiblity check before sending firmware command to initialize ets settings. Fixes: e207b7e9 ("net/mlx5e: ConnectX-4 firmware support for DCBX") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
This reverts commit 7f503169. Fixes: 7f503169 ("net/mlx5: Add MPCNT register infrastructure") Signed-off-by: Gal Pressman <galp@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
This reverts commit 9c726239. PCIe counters were introduced in a new firmware version, as a result users with old firmware encountered a syndrome every 200ms due to update stats work. This feature will be re-introduced later with appropriate capabilities infrastructure. Fixes: 9c726239 ("net/mlx5e: Expose PCIe statistics to ethtool") Signed-off-by: Gal Pressman <galp@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohamad Haj Yahia authored
Need to check that VF mac address entered by the admin user is either zero or unicast mac. Multicast mac addresses are prohibited. Fixes: 77256579 ('net/mlx5: E-Switch, Introduce Vport administration functions') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maor Gottlieb authored
Release the FTE lock when adding rule to the FTE has failed. Fixes: 0fd758d6 ('net/mlx5: Don't unlock fte while still using it') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maor Gottlieb authored
We need to mask the destination mac value with the destination mac mask when adding steering rule via ethtool. Fixes: 1174fce8 ('net/mlx5e: Support l3/l4 flow type specs in ethtool flow steering') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eli Cohen authored
Avoid using a local variable named numa_node to avoid shadowing a public one. Fixes: db058a18 ('net/mlx5_core: Set irq affinity hints') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Jurgens authored
If there is pending delayed work for health recovery it must be canceled if the device is being unloaded. Fixes: 05ac2c0b ("net/mlx5: Fix race between PCI error handlers and health work") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Noa Osherovich authored
When setting HCA capabilities, set log_max_qp to be the minimum between the selected profile's value and the HCA limitation. Fixes: 938fe83c ('net/mlx5_core: New device capabilities...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
Under the switchdev/offloads mode, packets that don't match any e-switch steering rule are sent towards the e-switch management port. We use a NIC HW steering rule set per vport (uplink and VFs) to make them be received into the host OS through the respective vport representor netdevice. Currnetly such missed RoCE packets will not get to this NIC steering rule, and hence VF RoCE will not work over the slow path of the offloads mode. This is b/c these packets will be matched by a steering rule added by the firmware that serves RoCE traffic set on the PF NIC vport which is also the e-switch management port under SRIOV. Disabling RoCE on the e-switch management vport when we are in the offloads mode, will signal to the firmware to remove their RoCE rule, and then the missed RoCE packets will be matched by the representor NIC steering rule as any other missed packets. To achieve that, we disable RoCE on the PF vport. We do that by removing (hot-unplugging) the IB device instance associated with the PF. This is also required by our current model where the PF serves as the uplink representor and hence only SW switching (TC, bridge, OVS) applications and slow path vport mlx5e net-device should be running over that vport. Fixes: c930a3ad ('net/mlx5e: Add devlink based SRIOV mode changes') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Blakey authored
Since we now use a non zero mask on addr_type, we are matching on its value (IPV4/IPV6). So before this fix, matching on enc_src_ip/enc_dst_ip failed in SW/classify path since its value was zero. This patch sets the proper value of addr_type for encapsulated packets. Fixes: 970bfcd0 ('net/sched: cls_flower: Use mask for addr_type') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7a ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast()
-
- 27 Dec, 2016 7 commits
-
-
Kweh, Hock Leong authored
Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chun-Hao Lin authored
This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
After commit 73b62bd0 ("virtio-net: remove the warning before XDP linearizing"), there's no users for bpf_warn_invalid_xdp_buffer(), so remove it. This is a revert for commit f23bc46c. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
pravin shelar authored
Networking stack accelerate vlan tag handling by keeping topmost vlan header in skb. This works as long as packet remains in OVS datapath. But during OVS upcall vlan header is pushed on to the packet. When such packet is sent back to OVS datapath, core networking stack might not handle it correctly. Following patch avoids this issue by accelerating the vlan tag during flow key extract. This simplifies datapath by bringing uniform packet processing for packets from all code paths. Fixes: 5108bbad ("openvswitch: add processing of L3 packets"). CC: Jarno Rajahalme <jarno@ovn.org> CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
Different namespaces might have different requirements to reuse TIME-WAIT sockets for new connections. This might be required in cases where different namespace applications are in place which require TIME_WAIT socket connections to be reduced independently of the host. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Gleixner authored
If mce_device_init() fails then the mce device pointer is NULL and the AMD mce code happily dereferences it. Add a sanity check. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
The attempt to prevent overwriting an active state resulted in a disaster which effectively disables all dynamically allocated hotplug states. Cleanup the mess. Fixes: dc280d93 ("cpu/hotplug: Prevent overwriting of callbacks") Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 26 Dec, 2016 5 commits
-
-
Al Viro authored
Split asm-only parts of arm64 uaccess.h into a new header and use that from *.S. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Florian Fainelli authored
Commit beb0babf ("korina: disable napi on close and restart") introduced calls to napi_disable() that were missing before, unfortunately this leaves a small window during which NAPI has a chance to run, yet we just freed resources since korina_free_ring() has been called: Fix this by disabling NAPI first then freeing resource, and make sure that we also cancel the restart task before doing the resource freeing. Fixes: beb0babf ("korina: disable napi on close and restart") Reported-by: Alexandros C. Couloumbis <alex@ozo.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Shahar reported a soft lockup in tc_classify(), where we run into an endless loop when walking the classifier chain due to tp->next == tp which is a state we should never run into. The issue only seems to trigger under load in the tc control path. What happens is that in tc_ctl_tfilter(), thread A allocates a new tp, initializes it, sets tp_created to 1, and calls into tp->ops->change() with it. In that classifier callback we had to unlock/lock the rtnl mutex and returned with -EAGAIN. One reason why we need to drop there is, for example, that we need to request an action module to be loaded. This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning after we loaded and found the requested action, we need to redo the whole request so we don't race against others. While we had to unlock rtnl in that time, thread B's request was processed next on that CPU. Thread B added a new tp instance successfully to the classifier chain. When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN and destroying its tp instance which never got linked, we goto replay and redo A's request. This time when walking the classifier chain in tc_ctl_tfilter() for checking for existing tp instances we had a priority match and found the tp instance that was created and linked by thread B. Now calling again into tp->ops->change() with that tp was successful and returned without error. tp_created was never cleared in the second round, thus kernel thinks that we need to link it into the classifier chain (once again). tp and *back point to the same object due to the match we had earlier on. Thus for thread B's already public tp, we reset tp->next to tp itself and link it into the chain, which eventually causes the mentioned endless loop in tc_classify() once a packet hits the data path. Fix is to clear tp_created at the beginning of each request, also when we replay it. On the paths that can cause -EAGAIN we already destroy the original tp instance we had and on replay we really need to start from scratch. It seems that this issue was first introduced in commit 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup"). Fixes: 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup") Reported-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Tested-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Larry Finger authored
I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Dec, 2016 9 commits
-
-
Linus Torvalds authored
The timer type simplifications caused a new gcc warning: drivers/base/power/domain.c: In function ‘genpd_runtime_suspend’: drivers/base/power/domain.c:562:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized] elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); despite the actual use of "time_start" not having changed in any way. It appears that simply changing the type of ktime_t from a union to a plain scalar type made gcc check the use. The variable wasn't actually used uninitialized, but gcc apparently failed to notice that the conditional around the use was exactly the same as the conditional around the initialization of that variable. Add an unnecessary initialization just to shut up the compiler. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull SMP hotplug notifier removal from Thomas Gleixner: "This is the final cleanup of the hotplug notifier infrastructure. The series has been reintgrated in the last two days because there came a new driver using the old infrastructure via the SCSI tree. Summary: - convert the last leftover drivers utilizing notifiers - fixup for a completely broken hotplug user - prevent setup of already used states - removal of the notifiers - treewide cleanup of hotplug state names - consolidation of state space There is a sphinx based documentation pending, but that needs review from the documentation folks" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-xp: Consolidate hotplug state space irqchip/gic: Consolidate hotplug state space coresight/etm3/4x: Consolidate hotplug state space cpu/hotplug: Cleanup state names cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions staging/lustre/libcfs: Convert to hotplug state machine scsi/bnx2i: Convert to hotplug state machine scsi/bnx2fc: Convert to hotplug state machine cpu/hotplug: Prevent overwriting of callbacks x86/msr: Remove bogus cleanup from the error path bus: arm-ccn: Prevent hotplug callback leak perf/x86/intel/cstate: Prevent hotplug callback leak ARM/imx/mmcd: Fix broken cpu hotplug handling scsi: qedi: Convert to hotplug state machine
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull turbostat updates from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: remove obsolete -M, -m, -C, -c options tools/power turbostat: Make extensible via the --add parameter tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz tools/power turbostat: line up headers when -M is used tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding tools/power turbostat: Support Knights Mill (KNM) tools/power turbostat: Display HWP OOB status tools/power turbostat: fix Denverton BCLK tools/power turbostat: use intel-family.h model strings tools/power/turbostat: Add Denverton RAPL support tools/power/turbostat: Add Denverton support tools/power/turbostat: split core MSR support into status + limit tools/power turbostat: fix error case overflow read of slm_freq_table[] tools/power turbostat: Allocate correct amount of fd and irq entries tools/power turbostat: switch to tab delimited output tools/power turbostat: Gracefully handle ACPI S3 tools/power turbostat: tidy up output on Joule counter overflow
-
Nicholas Piggin authored
Add a new page flag, PageWaiters, to indicate the page waitqueue has tasks waiting. This can be tested rather than testing waitqueue_active which requires another cacheline load. This bit is always set when the page has tasks on page_waitqueue(page), and is set and cleared under the waitqueue lock. It may be set when there are no tasks on the waitqueue, which will cause a harmless extra wakeup check that will clears the bit. The generic bit-waitqueue infrastructure is no longer used for pages. Instead, waitqueues are used directly with a custom key type. The generic code was not flexible enough to have PageWaiters manipulation under the waitqueue lock (which simplifies concurrency). This improves the performance of page lock intensive microbenchmarks by 2-3%. Putting two bits in the same word opens the opportunity to remove the memory barrier between clearing the lock bit and testing the waiters bit, after some work on the arch primitives (e.g., ensuring memory operand widths match and cover both bits). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicholas Piggin authored
A page is not added to the swap cache without being swap backed, so PageSwapBacked mappings can use PG_owner_priv_1 for PageSwapCache. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
No point in going through loops and hoops instead of just comparing the values. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
-
Thomas Gleixner authored
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
-
Thomas Gleixner authored
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
-